Flat Wing Diamond International

Flat Wing Diamond International, Total:298 items.

The international standard classification for "Flat Wing Diamond International" includes: Exploratory and extraction equipment , Character sets and information coding .

The Chinese standard classification for "Flat Wing Diamond International" includes: Combined transport , Ocean platforms , Postal packaging , Deck fittings , Architectural engineering construction machinery , Combination grippers , Codification , Postal service in general .

Group Standards of the People's Republic of China

T/MCLM 001-2016 Development guideline of Chinese cittaslow
T/WEA 008-2023 Professional Competence Standards for International Chinese Language Teachers
T/QDAS 065-2021 Full life cycle service specification for International Cooperation Platform
T/QDAS 066-2021 Construction and service specification for Overseas Collaborative Institution of International Cooperation Platform
T/CASME 817-2023 Flat bottom hot fix rhinestone
T/CCPS 0003-2023 Evaluation Protocol for International Proficiency Levels of Tea Artistry

Professional Standard - Railway

TB/T 3305-2000 Technical specifications for international combined transport of plane reloading roll list

Military Standard of the People's Republic of China-General Armament Department

GJB 5198-2003 Helicopter rotor balance requirements

Professional Standard - Petroleum

SY/T 10025-1999 drilling Rig Pre-Drilling Inspection Specification

Professional Standard - Postal Service

YZ/T 0011-2000 International label of mail bags
YZ/T 0003-2000 international postcard

Professional Standard-Ships

CB 256-1976 International signal flag
CBM 1114-1982 International shore connection

National Metrological Verification Regulations of the People's Republic of China

JJG 258-1988 Verification Regulation of Horizotal Spiral Blade Water Meter

未注明发布机构

DIN 344:1971 Core drills with parallel shank
SAE EIA-765A-2015 International and National Quality Standards Index
DIN 344:1923 Core drills with parallel shank

Professional Standard - Machinery

JB/T 10548-2006 Horizontal directional drilling
JB/T 10548-2016 Horizontal directional drilling

Taiwan Provincial Standard of the People's Republic of China

CNS 13189-2007 Location codes for international usage
CNS 10987-2007 International system of units
CNS 10987-1984 The International System of Units (SI)
CNS 12864-1991 Documentation - International Standard Book Numbering (ISBN)
CNS 12864-2007 Information and documentation - International standard book number (ISBN)

Professional Standard - Aviation

HB 1700-1987 Flat Bent Drill Plate

国家能源局

SY/T 7490-2020 Operational procedures of parallel horizontal well drilling

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 9648-1988 Code for intenational system of units
GB/T 28835-2012(俄语版) Страхование ответственности международной логистики —Основные элементы по страхованию ответственности ме

Professional Standard - Agriculture

GB 9648-1988 Code for intenational system of units

Professional Standard - Post and Telecommunication

YD/T 556-1997 Bill in five parts for international postal parcels

Korean Agency for Technology and Standards (KATS)

KS A 1707-1982 Platform containers for international trade
KS A 1707-2002 Platform containers for international trade
KS T 3001-2013 Flat rack containers for international trade with certain limitation
KS A 1704-1995 Flat rack containers for international trade with certain limitation
KS W 1619-2004(2014) Aerospace－Plain wing nut
KS A ISO/IEC GUIDE 21-2-2005(2021) Regional or national adoption of International Standards and other International Deliverables Part 2 Adoption of International Deliverables other than International Standards
KS A ISO/IEC GUIDE 21-2-2021 Regional or national adoption of International Standards and other International Deliverables Part 2 Adoption of International Deliverables other than International Standards
KS A ISO/IEC GUIDE 21-1-2005(2021) Regional or national adoption of International Standards and other International Deliverables Part 1 Adoption of International Standards
KS T 3002-2005(2010) Open top containers for international trade
KS A ISO/IEC GUIDE 21-1-2021 Regional or national adoption of International Standards and other International Deliverables Part 1 Adoption of International Standards
KS T 3001-2005(2010) Flat rack containers for international trade with certain limitation
KS B 3243-2002(2022) Parallel shank twist drills
KS B 3243-2002 Parallel shank twist drills
KS X 6004-2006 International Standard Book Number(ISBN)
KS X 6004-2020 International Standard Book Number(ISBN)
KS A ISO/IEC GUIDE 21-2:2005 Regional or national adoption of International Standards and other International Deliverables Part 2 Adoption of International Deliverables other than International Standards
KS C IEC 60028:2003 International standard of resistance for copper
KS T 3002-2005 Open top containers for international trade

HU-MSZT

MSZ 12438-1982 International, plane switching equipment testing
MSZ 19188-1985 International, Plane Exchange Form Modifications
MSZ 9710-1988 International technical requirements for flat loading and unloading plates
MSZ 14423-1975 Double sided flat drill
MSZ 19185-1970 International pool exchange
MSZH 300-23-1982 Adopt international and national standards
MSZ 3563-1980 ISBN International Standard Book Number

SCC

BOCA 345-2000 2000 International Mechanical Code - SOFTCOVER
AWWA DSS65659 Horizontal Directional Drilling with DIP/HDPE: Real World Applications
AS E44.5:1971 Freight containers (International sizes) - Cargo platforms
NS 5333:1973 Core drills with parallel shanks
CAN-3-001-01-1973 The International System of Units (SI)
BS 3763:1964 The International System of units (SI)
CAN3-Z234.2-1976 The International System of Units (SI)
BS 3763:1970 The International System of units (SI)
BS 3763:1976 The International System of units (SI)
NS-ISO 18461:2016 International museum statistics
DANSK DS/ISO 18461:2016 International museum statistics

Japanese Industrial Standards Committee (JISC)

JIS Z 1625:1995 Platform containers for international trade
JIS Z 1622:1974 Flat rack containers for international trade with certain limitation
JIS X 0305:1999 International standard book numbering (ISBN)
JIS X 0306:1999 International standard serial number (ISSN)

Society of Automotive Engineers (SAE)

SAE AS2592-2010 Flap Assemblies, Rotary Flap Peening
SAE AIR6052A-2022 Trimmable Horizontal Stabilizer Actuator Descriptions
SAE AMS2590-2010 Rotary Flap Peening of Metal Parts
SAE EIA-765A-2016 International and National Quality Standards Index

GB-REG

REG 49 CFR PART 91-2011 INTERNATIONAL AIR TRANSPORTATION FAIR COMPETITIVE PRACTICES
REG NACA-TR-675-1939 Effects of elevator nose shape, gap, balance, and tabs on the aerodynamic characteristics of a horizontal tail surface
REG NASA-LLIS-1231-2002 Lessons Learned - Space Shuttle& International Space Station/Inadequate Budget Levels
REG NACA-RM-L8H20-1948 An investigation at low speed of a 51.3 degree sweptback semispan wing equipped with 16.7-percent-chord plain flaps and ailerons having various spans and three trailing-edge angles
REG 14 CFR PART 292-2012 INTERNATIONAL CARGO TRANSPORTATION
REG NASA-LLIS-1055--1998 Lessons Learned - International Space Station (ISS) Program/Shuttle-Mir/Lessons Learned

US-DOT

DOT 49 CFR PART 91-2010 INTERNATIONAL AIR TRANSPORTATION FAIR COMPETITIVE PRACTICES

CZ-CSN

CSN 24 3705-1961 Steady plain drill bushings
CSN 01 0187-1988 International standard serial numbering (ISSN)
CSN 02 1162-1974 Flat knurled thumb screws
CSN 35 6402-1957 normal international terms
CSN 20 0322-1963 Accuracy of horizontal boring machines.

Association Francaise de Normalisation

NF A45-318:1990 Iron and steel. UIC 50 flat bottom railway rail.
NF S85-214:1998 Horology. Flat and semi-flat jewels.
NF A45-319:1990 Iron and steel. UIC 54 flat bottom railway rail and its fish plate.
NF S55-100:1976 INTERNATIONAL CAMPING SYMBOLS.
NF K19-005:1987 INTERNATIONAL CHEQUE REMITTANCE.
NF S85-214:2009 Horology - Flat jewels.

CEPT - Conference Europeenne des Administrations des Postes et des Telecommunications

CEPT T/TTVS 2-1974 Emission Level at the Origin of the International Radio Link

PL-PKN

PN M59650-1987 Spade drills
PN M59651-1987 Tips for spade drills

U.S. Air Force

AIR FORCE MS28013 REV A VALID NOTICE 4-2008 Indicator - Position, Horizontal Stabilizer
AIR FORCE MIL-I-5170 C VALID NOTICE 2-2008 INDICATOR, POSITION, HORIZONTAL STABILIZER

International Telecommunication Union (ITU)

ITU-T J.14 FRENCH-1988 RELATIVE LEVELS AND IMPEDANCES ON AN INTERNATIONAL SOUND - PROGRAMME CONNECTION
ITU-T D.196-1992 Clearing of International Telecommunication Balances of Accounts (Study Group III) 4 pp
ITU-T J.14 SPANISH-1988 RELATIVE LEVELS AND IMPEDANCES ON AN INTERNATIONAL SOUND - PROGRAMME CONNECTION
ITU-T D.50 SPANISH-2008 International Internet connection Conexiones internacionales por Internet
ITU-R BS.1726 SPANISH-2005 Signal level of digital audio accompanying television in international programme exchange
ITU-R BS.1726 FRENCH-2005 Signal level of digital audio accompanying television in international programme exchange
ITU-T E.540-1988 Overall grade of service of the international part of an international connection
ITU-T Q.26-1989 Direct Access to the International Network from the National Network - General Recommendations on Telephone Switching and Signalling - Functions and Information Flows for Services in the ISDN - Supplements (Study Group XI) 1 pp
ITU-T E.540 FRENCH-1993 OVERALL GRADE OF SERVICE OF THE INTERNATIONAL PART OF AN INTERNATIONAL CONNECTION
ITU-R TF.685 FRENCH-1990 INTERNATIONAL SYNCHRONIZATION OF UTC TIME SCALES SYNCHRONISATION INTERNATIONALE DES 蒀HELLES DE TEMPS UTC
ITU-T E.540 SPANISH-1993 OVERALL GRADE OF SERVICE OF THE INTERNATIONAL PART OF AN INTERNATIONAL CONNECTION
ITU-T R.75BIS-1988 Maintenance measurements of character error rate on international sections of international telegraph circuits
ITU-R TF.685 SPANISH-1990 INTERNATIONAL SYNCHRONIZATION OF UTC TIME SCALES SINCRONIZACI覰 INTERNACIONAL DE LAS ESCALAS DE TIEMPO UTC
ITU-T G.117-1996 TRANSMISSION ASPECTS OF UNBALANCE ABOUT EARTH Study Group 12
ITU-T E.540-1993 OVERALL GRADE OF SERVICE OF THE INTERNATIONAL PART OF AN INTERNATIONAL CONNECTION
ITU-T Q.5-1989 Advantages of Semi-Automatic Service in the International Telephone Service - General Recommendations on Telephone Switching and Signalling - Functions and Information Flows for Services in the ISDN - Supplements (Study Group XI) 1 pp
ITU-T S.18 FRENCH-1988 CONVERSION BETWEEN INTERNATIONAL TELEGRAPH ALPHABET No. 2 AND INTERNATIONAL ALPHABET No. 5
ITU-T S.18 SPANISH-1988 CONVERSION BETWEEN INTERNATIONAL TELEGRAPH ALPHABET No. 2 AND INTERNATIONAL ALPHABET No. 5
ITU-R TF.458-3 FRENCH-1998 INTERNATIONAL COMPARISONS OF ATOMIC TIME SCALES COMPARAISONS INTERNATIONALES D'蒀HELLES DE TEMPS ATOMIQUE
ITU-T Q.26 FRENCH-1988 DIRECT ACCESS TO THE INTERNATIONAL NETWORK FROM THE NATIONAL NETWORK
ITU-T M.560 FRENCH-1988 INTERNATIONAL TELEPHONE CIRCUITS - PRINCIPLES, DEFINITIONS AND RELATIVE TRANSMISSION LEVELS
ITU-T M.560-1988 INTERNATIONAL TELEPHONE CIRCUITS - PRINCIPLES, DEFINITIONS AND RELATIVE TRANSMISSION LEVELS
ITU-T Q.26 SPANISH-1988 DIRECT ACCESS TO THE INTERNATIONAL NETWORK FROM THE NATIONAL NETWORK
ITU-T S.18-1989 Conversion between International Telegraph Alphabet No. 2 and International Alphabet No. 5 - Telegraph Services Terminal Equipment (Study Group IX) 6 pp
ITU-R SM.1139 FRENCH-1995 INTERNATIONAL MONITORING SYSTEM
ITU-T M.560 SPANISH-1988 INTERNATIONAL TELEPHONE CIRCUITS - PRINCIPLES, DEFINITIONS AND RELATIVE TRANSMISSION LEVELS
ITU-R BS.1726-2005 Signal level of digital audio accompanying television in international programme exchange
ITU-R SM.1139 SPANISH-1995 INTERNATIONAL MONITORING SYSTEM
ITU-R SM.1139-1995 International Monitoring System
ITU-T D.67-1995 Charging and Accounting in the International Telex Service
ITU-T R.75 FRENCH-1988 MAINTENANCE MEASUREMENTS ON CODE - INDEPENDENT INTERNATIONAL SECTIONS OF INTERNATIONAL TELEGRAPH CIRCUITS
ITU-T S.18-1988 CONVERSION BETWEEN INTERNATIONAL TELEGRAPH ALPHABET No. 2 AND INTERNATIONAL ALPHABET No. 5
ITU-T R.75 SPANISH-1988 MAINTENANCE MEASUREMENTS ON CODE - INDEPENDENT INTERNATIONAL SECTIONS OF INTERNATIONAL TELEGRAPH CIRCUITS
ITU-T RESOLUCION 7 SPANISH-2008 Collaboration with the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC)
ITU-T D.50 CHINESE-2008 International Internet connection
ITU-T E.175-1993 Models for International Network Planning
ITU-R M.1677-2009 International Morse code
ITU-T R.70 BIS-1989 Numbering of International VFT Channels - Telegraph Transmission (Study Group IX) 2 pp
ITU-T R.75 BIS FRENCH-1988 MAINTENANCE MEASUREMENTS OF CHARACTER ERROR RATE ON INTERNATIONAL SECTIONS OF INTERNATIONAL TELEGRAPH CIRCUITS
ITU-R RESOLUTION 17-3 FRENCH-2007 Integration of International Mobile Telecommunications (IMT-2000 and IMT-Advanced) with existing networks
ITU-R M.1677-2004 International Morse code
ITU-T RESOLUTION 7-2008 Collaboration with the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC)
ITU-T E.1100-2009 Specification of an international numbering resource for use in the provisioning of international help lines
ITU-R M.1677-1 FRENCH-2009 International Morse code
ITU-T D.50-2008 International Internet connection Study Group 3
ITU-T R.114-1993 Numbering of International TDM Channels - Telegraphy Telegraph Transmission (Study Group IX) 7 pp
ITU-T RESOLUTION 7 CHINESE-2008 Collaboration with the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC)
ITU-T R.70BIS-1988 Numbering of international VFT channels

ESDU - Engineering Sciences Data Unit

ESDU 91009 B-2014 Effect of twin fins on isolated tailplane lift-curve slope
ESDU 97021 A-2012 Effect of trailing-edge flap deployment on average downwash at the tailplane at low speeds
ESDU 97021-1997 Effect of trailing-edge flap deployment on average downwash at the tailplane at low speeds.
ESDU 91009 A-1993 Effect of twin fins on isolated tailplane lift-curve slope.
ESDU 93015 B-2009 Program for calculation of maximum lift coefficient of plain aerofoils and wings at subsonic speeds
ESDU 01007-2001 Trailing vortex drag factors for wings with part-span trailing-edge plain flaps.
ESDU 80020 A-1981 Average downwash at the tailplane at low angles of attack and subsonic speeds.
ESDU 98017 A-2003 Aerofoil and wing pitching moment coefficient at zero angle of attack due to deployment of trailing-edge plain flaps at low speeds.
ESDU 98017-1998 AEROFOIL AND WING PITCHING MOMENT COEFFICIENT AT ZERO ANGLE OF ATTACK DUE TO DEPLOYMENT OF TRAILING-EDGE PLAIN FLAPS AT LOW SPEEDS
ESDU 80020 B-2012 Average downwash at the tailplane at low angles of attack and subsonic speeds
ESDU 93015 A-1994 Program for calculation of maximum lift coefficient of plain aerofoils and wings at subsonic speeds.
ESDU 87024 D-2006 Low-speed drag coefficient increment at constant lift due to full-span plain flaps.
ESDU 89034 A-1993 The maximum lift coefficient of plain wings at subsonic speeds.

SE-SIS

SIS SS 62 55 11-1991 Documentation — International standard serial numbering (ISSN)
SIS SMS 2100-1967 ISO-tolerantes. Survev
SIS SS 61 41 33-1989 International cheque remittance
SIS SS 3376-1980 Milling cutters — Slot drills with parallel shank with flat
SIS SMS 2112-1964 SO-tolerances. Holes. J6-J8

German Institute for Standardization

DIN 7483:1966 Wood bits; Forstner bits and multi spur machine bits
DIN 344:1981-10 Core drills with parallel shank
DIN 327-1:1989-04 Parallel shank slot drills; dimensions

National Aeronautics and Space Administration (NASA)

NASA NPR 1810.1 REV A-2006 HEALTH SERVICES FOR INTERNATIONAL TRAVEL OR ASSIGNMENT
NASA NACA-TR-1071-1952 Theoretical symmetric span loading due to flap deflection for wings of arbitrary plan form at subsonic speeds
NASA NACA-RM-A7K24-1948 Wind-tunnel investigation of horizontal tails. I - unswept and 35 degrees swept-back plan forms of aspect ratio 3
NASA NACA-RM-L55I20-1955 Effect of large negative dihedral of the horizontal tail on longitudinal and lateral stability characteristics of a swept-wing configuration at transonic speeds
NASA NACA-ARR-L4I11 REV F-1944 Wind-Tunnel Investigation of Control-Surface Characteristics XX - Plain and Balanced Flaps on an NACA 0009 Rectangular Semispan Tail Surface
NASA NACA-RM-A53J07-1954 The effects of horizontal-tail height and a partial-span leading-edge extension on the static longitudinal stability of a wing-fuselage-tail combination having a sweptback wing
NASA NACA-ACR-4A11-1944 Collection of balanced-aileron test data
NASA NACA-RM-A8J21-1948 Wind-tunnel investigation of horizontal tails IV : unswept plan form of aspect ratio 2 and a two-dimensional model
NASA NACA-RM-A8B11-1948 Wind-tunnel investigation of horizontal tails. II - unswept and 35 degrees swept-back plan forms of aspect ratio 4.5
NASA NACA-RM-A8H30-1948 Wind-tunnel investigation of horizontal tails. III - unswept and 35 degrees swept-back plan forms of aspect ratio 6
NASA NACA-WR-L-701-1942 Test of NACA 66, 2-116, a = 0.6 airfoil section fitted with pressure balanced and slotted flaps for the wing of the XP-63 airplane
NASA NACA-TN-2010-1950 Effect of horizontal tail on low-speed static lateral stability characteristics of a model having 45 degree sweptback wing and tail surfaces
NASA-CR-2696-1976 Reflection-plane tests of spoilers on an advanced technology wing with a large Fowler flap
NASA NACA-MR-L6A08 REV A-1946 Aerodynamic data for a wing section of the Republic XF-12 airplane equipped with a double slotted flap

International Organization for Standardization (ISO)

ISO/IEC Guide 21-2:2005 Regional or national adoption of International Standards and other International Deliverables-Part 2:Adoption of International Deliverables other than International Standards
ISO/IEC Guide 21-1:2005 Regional or national adoption of International Standards and other International Deliverables-Part 1:Adoption of International Standards
ISO/AWI 17301-1:2017 Model International Standard
ISO 6680:1987 International cheque remittance
ISO 18461:2016 International museum statistics
ISO 2789:1974 International library statistics

VN-TCVN

TCVN 6709-2-2007 Regional or national adoption of International Standards and other International Deliverables.Part 2: Adoption of International Deliverables other than International Standards
TCVN 6709-1-2007 Regional or national adoption of International Standards and other International Deliverables.Part 1: Adoption of International Standards

ITE - Institute of Transportation Engineers

VHS-026-1997 International Experiences

GSO

GSO ISO/IEC Guide 21-2:2017 Regional or national adoption of International Standards and other International Deliverables -- Part 2: Adoption of International Deliverables other than International Standards
OS GSO ISO/IEC Guide 21-1:2017 Regional or national adoption of International Standards and other International Deliverables -- Part 1: Adoption of International Standards
GSO ISO/IEC Guide 21-1:2017 Regional or national adoption of International Standards and other International Deliverables -- Part 1: Adoption of International Standards
BH GSO ISO 18461:2022 International museum statistics
GSO IEC 60028:1994 International standard of resistance for copper
OS GSO IEC 60028:1994 International standard of resistance for copper

BE-NBN

NBN 533-1959 I-beam. Parallel flange I-beam
NBN 351F-1968 International character symbol used in electronic technology, International System of Units

US-FCR

FCR COE ER 550-1-1-1984 INTERNATIONAL AGREEMENTS
FCR COE ER 380-1-17-1985 INTERNATIONAL TECHNOLOGY TRANSFER (IT2)

IMO - International Maritime Organization

I930E-1976 International Conference on the Establishment of an International Maritime Satellite System (INMARSAT)
I450E-1989 INTERNATIONAL CONFERENCE ON SALVAGE (1989) FINAL ACT OF THE CONFERENCE AND CONVENTION ON SALVAGE

TH-TISI

TIS 5021.1-2014 Regional or national adoption of international standards and other international deliverables part 1:adoption of interna tional standards
TIS 5021.2-2014 Regional or national adoption of international standards and other international deliverables part 2:adoption of other international deliverables

Association of German Mechanical Engineers

DVS-IIW/EWF 1111 Beiblatt 1-2005 International Welder (IW)
DVS-IIW/EWF 1111-2004 International Welder (IW)
DVS-IIW/EWF 1111 Beiblatt 1-2004 International Welder (IW)
DVS-IIW/EWF 1111 Beiblatt 2-2004 International Welder (IW)
DVS-IIW/EWF 1111 Beiblatt 1-2007 International Welder (IS), International Welder (IW) Detailed subject schedule
DVS-IIW/EWF 1172 Beiblatt 2-2004 International Welding Technician (ST), International Welding Technician (IWT) Alternative route distance learning courses for International Welding Technician
DVS-IIW/EWF 1172 Beiblatt 3-2004 International Welding Technician (ST), International Welding Technician (IWT) exams and qualifications
DVS-IIW/EWF 1111-2007 International Welder (IS), International Welder (IW) General information, requirements, topic overview
DVS-IIW/EWF 1171 Beiblatt 4-2004 International Welding Specialist (IWST)
DVS-IIW/EWF 1171 Beiblatt 3-2004 International Welding Specialist (IWST)
DVS-IIW/EWF 1171-2004 International Welding Specialist (IWST)
DVS-IIW/EWF 1171 Beiblatt 1-2004 International Welding Specialist (IWST)
DVS-IIW/EWF 1171 Beiblatt 2-2004 International Welding Specialist (IWST)

American Society of Mechanical Engineers (ASME)

ASME SEC II A SI UNITS-2001 SI Units
ASME SEC III D1 NC SI UNITS-2001 SI Units
ASME SEC III NCA SI UNITS-2001 SI Units
ASME SEC VIII D3 SI UNITS-2001 SI Units
ASME SEC IX SI UNITS-2001 SI Units
ASME SEC VIII D1 SI UNITS-2001 SI Units
ASME SEC XI SI UNITS-2001 SI Units
ASME SEC V SI UNITS-2001 SI Units
ASME SEC VIII D2 SI UNITS-2001 SI Units
ASME SEC III D1 NF SI UNITS-2001 SI Units
ASME SEC X SI UNITS-2001 SI Units
ASME SEC II D SI UNITS-2003 SI Units
ASME SEC III D1 APP SI UNITS-2001 SI Units
ASME SEC VI SI UNITS-2001 SI Units
ASME SEC II C SI UNITS-2001 SI Units
ASME SEC III D2 SI UNITS-2001 SI Units
ASME SEC IV SI UNITS-2001 SI Units
ASME SEC III D1 NB SI UNITS-2001 SI Units
ASME SEC III D1 ND SI UNITS-2001 SI Units
ASME SEC III D1 NG SI UNITS-2001 SI Units
ASME SEC III D3 SI UNITS-2001 SI Units
ASME SEC III D1 NE SI UNITS-2001 SI Units
ASME SEC VII SI UNITS-2001 SI Units
ASME SEC I SI UNITS-2001 SI Units
ASME SEC II B SI UNITS-2001 SI Units
ASME SEC III D1 NH SI UNITS-2001 SI Units

PT-IPQ

NP 172-1986 Système International d'Unités

Building Officials and Code Administrators International(U.S.)

BOCA IMC-2000-2000 International Mechanical Code
BOCA IMC-2000 PREFACE-2000 International Mechanical Code
BOCA IPC-1997 PREFACE-1997 International Plumbing Code
BOCA IZC-1998-1998 International Zoning Code
BOCA IPC-1997-1997 International Plumbing Code
BOCA IZC-1998 PREFACE-1998 International Zoning Code

Indonesia Standards

SNI 19-2746-1992 International system of units

TR-TSE

TS 293-1965 THE INTERNATIONAL SYSTEM OF UNITS AND OUANTITIES
TS 2144-1975 NTERNATIONAL LIBRARY STATISTICS

Standard Association of Australia （SAA）

AS 4762:2000 General-purpose flat pallets - Principal dimensions and tolerances (International pallet sizes)
AS 1852(Pt 301, 302, 303):1988 International electrotechnical vocabulary

RO-ASRO

STAS 6728/1-1980 SMALL TWIST DRILL AND PARALLEL SHANK Dimensions
STAS SR ISO 2108:1994 Information and documentation. International standard book numbering (ISBN)
STAS 1547-1986 Hardware for buildings slnk hinges with plane WINGS

CU-NC

NC 39-20-1985 National Scientifio and Technical Information System. National and International Interlibrary Lending Service

IT-UNI

UNI 3614-1955 Standard drill bit. Steel drill bits; flat drill bits; milled drill bits; cambered drill bits and subgroup drill bits
UNI 6840-1971 Casing type flat drill
CNR-UNI 10003-1974 International System of Units (SI)

International Code Council

ICC IMC-2000-2000 International Mechanical Code
ICC IZC-1998 PREFACE-1998 International Zoning Code
ICC IFGC-1997 PREFACE-1997 International Fuel Gas Code
ICC IMC-2000 PREFACE-2000 International Mechanical Code
ICC IPC-1997-1997 International Plumbing Code
ICC IFGC-1997-1997 International Fuel Gas Code
ICC 870-2000 International Zoning Code
ICC IECC-1998-1998 International Energy Conservation Code
ICC IPC-1997 PREFACE-1997 International Plumbing Code
ICC IECC-1998 PREFACE-1998 International Energy Conservation Code
ICC IZC-1998-1998 International Zoning Code
ICC SUPPLEMENT-2004 Supplement to the International Codes

Federal Aviation Administration (FAA)

FAA 14 CFR PART 293-2011 INTERNATIONAL PASSENGER TRANSPORTATION
FAA 14 CFR PART 292-2011 INTERNATIONAL CARGO TRANSPORTATION

VE-FONDONORMA

NORVEN 1-9-1965 International System of Units

International Electrotechnical Commission (IEC)

IEC 60050-0:1979 International Electrotechnical Vocabulary General Index
IEC 60028:1925 International standard of resistance for copper

International Federation of Trucks and Engines

NAVISTAR TMS 4515-1988 VOID - International Urethane

British Standards Institution (BSI)

TH 20348-1999 Electrical Plugs - International
BS ISO 18461:2016 International museum statistics

North Atlantic Treaty Organization Standards Agency

STANAG 7133-2004 MINIMUM LEVEL OF CRASH, FIRE FIGHTING AND RESCUE (CFR) SERVICE FOR DEPLOYED FIXED AND ROTARY WING AIRCRAFT

Electronic Industrial Alliance (U.S.)

EIA-765-A-2000 International and National Quality Standards Index

American National Standards Institute （ANSI)

ANSI/EIA 765-A:2000 International and National Quality Standards Index

ITU-T - International Telecommunication Union/ITU Telcommunication Sector

RESOLUCIÓN 7 SPANISH-2008 Collaboration with the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC)
RESOLUTION 7-2008 Collaboration with the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC)
ITU-T M.1385 SPANISH-2000 Maintenance of international leased circuits that are supported by international data transmission systems
ITU-T M.1380 SPANISH-2000 Puesta en servicio de circuitos internacionales arrendados soportados por sistemas internacionales de transmisión de datos

IX-UIC

UIC O A-2009 UIC Internal Regulations

American Petroleum Institute (API)

API RP 92U-2008(2015) Underbalanced Drilling Operations

European Committee for Standardization (CEN)

EN ISO 2789:1994 Information and Documentation - International Library Statistics

YU-JUS

JUS K.D2.110-1983 Parallel shank slot drills

International Maritime Organization (IMO)

IMO I450E-1989 INTERNATIONAL CONFERENCE ON SALVAGE (1989) FINAL ACT OF THE CONFERENCE AND CONVENTION ON SALVAGE

American Society for Testing and Materials (ASTM)

ASTM R0017 SI Quick Reference Guide: International System of Units (SI) The Modernized Metric System

Danish Standards Foundation

DS-hæfte 6:2005 International Classification for Standards (ICS)

American Society of Civil Engineers (ASCE)

ASCE GSP 256-2015 IFCEE 2015

CEN - European Committee for Standardization

EN ISO 2789:2003 Information and documentation - International library statistics

(U.S.) Ford Automotive Standards

FORD U-MA003-8501-1989 MATERIAL FOR DRILLS, STEP DRILLS, CENTRE DRILLS, COUNTER BORES, CORE DRILLS AND COUNTER SINKS FOR MODERATE WEAR APPLICATIONS

Others: