Dynamic Thermomechanical Analysis Testing

Dynamic Thermomechanical Analysis Testing, Total:187 items.

The international standard classification for "Dynamic Thermomechanical Analysis Testing" includes: Vibrations, shock and vibration measurements , Solar energy engineering , Noise emitted by machines and equipment , Noise with respect to human beings .

The Chinese standard classification for "Dynamic Thermomechanical Analysis Testing" includes: Basic standards and general methods , Solar energy , Architectural engineering construction machinery .

National Metrological Technical Specifications of the People's Republic of China

JJF 2069-2023 Calibration Specification for Thermomechanical Analyzers

Military Standard of the People's Republic of China-General Armament Department

GJB 4389-2002 Mechanical dynamic parameter testing procedures
GJB 4389A-2014 The test procedure of dynamical parameter for firearms

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 33511-2017 Mechanical vibration—Evaluation of measurement results from dynamic tests and investigation on bridges

Professional Standard - Military and Civilian Products

WJ 2291-1995 Calibration Regulations for Thermomechanical Analyzers

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 43057-2023 Photovoltaic (PV) modules—Dynamic mechanical load testing
GB/T 16710.5-1996 Measurement at the operatorposition of noise emitted by earth-moving machinery--Dynamic test conditions
GB/T 25614-2010/ISO 6395:2008 Dynamic test conditions for the determination of sound power levels of earth-moving machinery
GB/T 2298-2010 Mechanical vibration，shock and condition monitoring - Vocabulary
GB/T 25615-2010/ISO 6396-2008 Dynamic test conditions for determination of emission sound pressure level at driver's position of earth-moving machinery
GB/T 19873.2-2009 Condition monitoring and diagnostics of machines - Vibration condition monitoring - Part 2: Processing, analysis and presentation of vibration data
GB/T 25614-2010/ISO 6395-2008 Dynamic test conditions for the determination of sound power levels of earth-moving machinery
GB/T 29715-2013 Mechanical vibration and shock—Guidelines for dynamic tests and investigations on bridges and viaducts
GB/T 11998-1989 Determination of glass transition temperature of plastics--Thermomechanical analysis
GB/T 25614-2010 Earth-moving machinery—Determination of sound power level—Dynamic test conditions
GB/T 16710.4-1996 Measurement of exterior noise emitted by earth-moving machinery--Dynamic test conditions

Professional Standard - Machinery

JB/T 10392-2002 Modal test analysis and vibration measurement methods on the stator core & frame for turbo-generators

American Society for Testing and Materials (ASTM)

ASTM E2254-24 Standard Test Method for Storage Modulus Calibration of Dynamic Mechanical Analyzers
ASTM RR-E37-1041 2011 E2254-Standard Test Method for Storage Modulus Calibration of Dynamic Mechanical Analyzers
ASTM E3301-22 Standard Test Method for Temperature Calibration of Dynamic Mechanical Analyzers Using Thermal Lag
ASTM E1867-97 Standard Test Method for Temperature Calibration of Dynamic Mechanical Analyzers
ASTM E1867-18 Standard Test Methods for Temperature Calibration of Dynamic Mechanical Analyzers
ASTM E1867-22 Standard Test Methods for Temperature Calibration of Dynamic Mechanical Analyzers
ASTM E1867-01 Standard Test Method for Temperature Calibration of Dynamic Mechanical Analyzers
ASTM E1867-16 Standard Test Methods for Temperature Calibration of Dynamic Mechanical Analyzers
ASTM E1867-06 Standard Test Method for Temperature Calibration of Dynamic Mechanical Analyzers
ASTM E2254-09 Standard Test Method for Storage Modulus Calibration of Dynamic Mechanical Analyzers
ASTM E1867-11 Standard Test Method for Temperature Calibration of Dynamic Mechanical Analyzers
ASTM RR-E37-1035 2005 E2206-Test Method for Force Calibration of Thermomechanical Analyzers
ASTM E1867-13 Standard Test Method for Temperature Calibration of Dynamic Mechanical Analyzers
ASTM E1867-12 Standard Test Method for Temperature Calibration of Dynamic Mechanical Analyzers
ASTM E2254-03 Standard Test Method for Storage Modulus Calibration of Dynamic Mechanical Analyzers
ASTM E2254-11 Standard Test Method for Storage Modulus Calibration of Dynamic Mechanical Analyzers
ASTM E2254-18 Standard Test Method for Storage Modulus Calibration of Dynamic Mechanical Analyzers
ASTM E2254-13 Standard Test Method for Storage Modulus Calibration of Dynamic Mechanical Analyzers
ASTM E2254-08 Standard Test Method for Storage Modulus Calibration of Dynamic Mechanical Analyzers
ASTM E2254-23 Standard Test Method for Storage Modulus Calibration of Dynamic Mechanical Analyzers
ASTM E1363-97e1 Standard Test Method for Temperature Calibration of Thermomechanical Analyzers
ASTM E2425-11 Standard Test Method for Loss Modulus Conformance of Dynamic Mechanical Analyzers
ASTM E2425-05 Standard Test Method for Loss Modulus Conformance of Dynamic Mechanical Analyzers
ASTM E2425-21 Standard Test Method for Loss Modulus Conformance of Dynamic Mechanical Analyzers
ASTM E2206-21 Standard Test Method for Force Calibration of Thermomechanical Analyzers
ASTM E2206-11 Standard Test Method for Force Calibration of Thermomechanical Analyzers
ASTM E2425-16 Standard Test Method for Loss Modulus Conformance of Dynamic Mechanical Analyzers
ASTM RR-E37-1034 2005 E2347-Test Method for Indentation Softening Temperature by Thermomechanical Analysis
ASTM D6382/D6382M-99(2017) Standard Practice for Dynamic Mechanical Analysis and Thermogravimetry of Roofing and Waterproofing Membrane Material
ASTM RR-E37-1011 1990 E1363-Standard Test Method for Temperature Calibration of Thermomechanical Analyzers
ASTM E1640-99 Standard Test Method for Assignment of the Glass Transition Temperature By Dynamic Mechanical Analysis
ASTM RR-E37-1032 2003 E2092-Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM D6382-99(2005) Standard Practice for Dynamic Mechanical Analysis and Thermogravimetry of Roofing and Waterproofing Membrane Material
ASTM D6382-99 Standard Practice for Dynamic Mechanical Analysis and Thermogravimetry of Roofing and Waterproofing Membrane Material
ASTM E831-03 Standard Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis
ASTM E2206-11(2015) Standard Test Method for Force Calibration of Thermomechanical Analyzers
ASTM RR-E37-1000 1981 E0831-Standard Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis
ASTM RR-E37-1025 2000 E2092-Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM D5024-95a Standard Test Method for Plastics: Dynamic Mechanical Properties: In Compression
ASTM E2206-06 Standard Test Method for Force Calibration Of Thermomechnical Analyzers
ASTM E1363-16 Standard Test Method for Temperature Calibration of Thermomechanical Analyzers
ASTM E1363-23 Standard Test Method for Temperature Calibration of Thermomechanical Analyzers
ASTM E831-05 Standard Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis
ASTM E831-24 Standard Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis
ASTM E831-06 Standard Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis
ASTM E1363-03 Standard Test Method for Temperature Calibration of Thermomechanical Analyzers
ASTM E2918-23 Standard Test Method for Performance Validation of Thermomechanical Analyzers
ASTM E1363-18 Standard Test Method for Temperature Calibration of Thermomechanical Analyzers
ASTM E2918-18 Standard Test Method for Performance Validation of Thermomechanical Analyzers
ASTM D6382/D6382M-99(2022) Standard Practice for Dynamic Mechanical Analysis and Thermogravimetry of Roofing and Waterproofing Membrane Material
ASTM E1363-13 Standard Test Method for Temperature Calibration of Thermomechanical Analyzers
ASTM E2918-18a Standard Test Method for Performance Validation of Thermomechanical Analyzers
ASTM E1363-08 Standard Test Method for Temperature Calibration of Thermomechanical Analyzers
ASTM E2918-13 Standard Test Method for Performance Validation of Thermomechanical Analyzers
ASTM RR-D20-1246 2008 D4440-Test Method for Plastics: Dynamic Mechanical Properties Melt Rheology

Association Francaise de Normalisation

NF EN 15433-5:2008 Transport loads - Measurement and analysis of dynamic mechanical loads - Part 5: derivation of test specifications
NF EN 15433-4:2008 Transport loads - Measurement and analysis of dynamic mechanical loads - Part 4: data evaluation
NF EN 15433-1:2008 Transport loads - Measurement and analysis of dynamic mechanical loads - Part 1: general requirements
NF ISO 14963:2004 Vibrations mécaniques et chocs - Lignes directrices pour les essais dynamiques des ponts et viaducs
NF ISO 6395:2008 Earth-moving machinery - Determination of sound power level - Dynamic test conditions
NF E58-022*NF ISO 6395:2008 Earth moving machinery - Determination of sound power level - Dynamic test conditions
NF E90-964*NF ISO 18649:2015 Mechanical vibration - Evaluation of measurement results from dynamic tests and investigations on bridges
NF E90-001*NF ISO 2041:2019 Mechanical vibration, shock and condition monitoring - Vocabulary
NF C96-022-4*NF EN 60749-4:2017 Semiconductor devices - Mechanical and climatic test methods - Part 4: Damp Heat, steady state, highly accelerated stress test (HAST)

GSO

GSO ISO 13373-2:2013 Condition monitoring and diagnostics of machines -- Vibration condition monitoring -- Part 2: Processing, analysis and presentation of vibration data
GSO IEC/TR 62343-6-5:2014 Dynamic modules - Part 6-5: Design guide - Investigation of operating mechanical shock and vibration tests for dynamic modules
GSO IEC TS 62782:2021 Photovoltaic (PV) modules - Cyclic (dynamic) mechanical load testing
GSO ISO 6395:2013 Earth-moving machinery -- Determination of sound power level -- Dynamic test conditions
BH GSO IEC TS 62782:2022 Photovoltaic (PV) modules - Cyclic (dynamic) mechanical load testing
OS GSO IEC/TR 62343-6-5:2014 Dynamic modules - Part 6-5: Design guide - Investigation of operating mechanical shock and vibration tests for dynamic modules
OS GSO ISO 6395:2013 Earth-moving machinery -- Determination of sound power level -- Dynamic test conditions
OS GSO ISO 18649:2013 Mechanical vibration -- Evaluation of measurement results from dynamic tests and investigations on bridges
GSO ISO 18649:2013 Mechanical vibration -- Evaluation of measurement results from dynamic tests and investigations on bridges
BH GSO ISO 13373-2:2016 Condition monitoring and diagnostics of machines -- Vibration condition monitoring -- Part 2: Processing, analysis and presentation of vibration data
OS GSO ISO 13373-2:2013 Condition monitoring and diagnostics of machines -- Vibration condition monitoring -- Part 2: Processing, analysis and presentation of vibration data
OS GSO IEC 60749-4:2014 Semiconductor devices - Mechanical and climatic test methods - Part 4: Damp heat, steady state, highly accelerated stress test (HAST)
GSO IEC 60749-4:2014 Semiconductor devices - Mechanical and climatic test methods - Part 4: Damp heat, steady state, highly accelerated stress test (HAST)

KR-KS

KS B ISO 6395-2017 Earth-moving machinery — Determination of sound power level — Dynamic test conditions
KS B ISO 18649-2020 Mechanical vibration — Evaluation of measurement results from dynamic tests and investigations on bridges
KS B ISO 13373-3-2023 Condition monitoring and diagnostics of machines — Vibration condition monitoring — Part 3: Guidelines for vibration diagnosis
KS B ISO 18437-5-2022 Mechanical vibration and shock — Characterization of the dynamic mechanical properties of visco-elastic materials — Part 5: Poisson ratio based on comparison between measurements and finite element an
KS B ISO 2041-2021 Mechanical vibration, shock and condition monitoring ―Vocabulary
KS B ISO 2041-2016 Mechanical vibration, shock and condition monitoring ― Vocabulary
KS M ISO 11359-3-2008(2023) Plastics－Thermomechanical analysis(TMA)－Part 3：Determination of penetration temperature

Korean Agency for Technology and Standards (KATS)

KS B ISO 6395:2017 Earth-moving machinery — Determination of sound power level — Dynamic test conditions
KS M 3706-2008(2013) Testing method for linear thermal expansion coefficient of plastics by thermomechanical analysis
KS M 3005-2002(2022) Testing method for softening temperature of thermoplastic film and sheet by thermomechanical analysis
KS M 3005-2002(2017) Testing method for softening temperature of thermoplastic film and sheet by thermomechanical analysis
KS I ISO 6395:2004 Acoustics-Measurement of exterior noise emitted byearth-moving machinery-Dynamic test conditions
KS L 1609-1994 Measuring method of thermal expansion of fine ceramics by thermomechanical analysis
KS B ISO 18649:2020 Mechanical vibration — Evaluation of measurement results from dynamic tests and investigations on bridges
KS B ISO 6395-2022 Earth-moving machinery — Determination of sound power level — Dynamic test conditions
KS B ISO 6395-2017(2022) Earth-moving machinery — Determination of sound power level — Dynamic test conditions
KS B ISO 18649:2005 Mechanical vibration-Evaluation of measurement results from dynamic tests and investigations on bridges
KS V 8890-2019 Dynamic range measurement test procedure of frequency analysis system for ships
KS B ISO 2041:2016 Mechanical vibration, shock and condition monitoring ― Vocabulary
KS B ISO 2041:2011 Mechanical vibration, shock and condition monitoring-Vocabulary
KS B ISO 2041:2021 Mechanical vibration, shock and condition monitoring ―Vocabulary
KS M ISO 11359-3-2008(2018) Plastics－Thermomechanical analysis(TMA)－Part 3：Determination of penetration temperature
KS M ISO 6721-1-2012(2022) Plastics－Determination of dynamic mechanical properties－Part 1：General principles

GOSTR

GOST R 58646-2019 Photovoltaic modules. Cyclic (dynamic) mechanical load testing

Malaysia Standards

MS 1466-1999 Method of test for linear thermal expansion of solid materials by thermomechanical analysis

Japanese Industrial Standards Committee (JISC)

JIS K 7197:1991 Testing method for linear thermal expansion coefficient of plastics by thermomechanical analysis
JIS A 8317-1:2010 Earth-moving machinery -- Determination of sound power level -- Dynamic test conditions
JIS K 7196:1991 Testing method for softening temperature of thermoplastics film and sheeting by thermomechanical analysis

RU-GOST R

GOST R ISO 18437-5-2014 Mechanical vibration and shock. Characterization of the dynamic mechanical properties of visco-elastic materials. Part 5. Determination of Poisson using finite element analysis
GOST R 57754-2017 Polymer composites. Test method for determination of linear thermal expansion by thermomechanical analysis
GOST R ISO 18437-4-2014 Mechanical vibration and shock. Characterization of the dynamic mechanical properties of visco-elastic materials. Part 4. Dynamic stiffness method

American National Standards Institute （ANSI)

ANSI/ASTM D4473:2001 Measuring the Cure Behavior of Thermosetting Resins Using Dynamic Mechanical Properties (08.03)
ANSI/ASTM D5418:2001 Test Method for Measuring the Dynamic Mechanical Properties of Plastics Using a Dual Cantilever Beam (08.03)
ANSI/ASTM D5026:2001 Test Method for Measuring the Dynamic Mechanical Properties of Plastics in Tension (08.03)
ANSI/ASA S2.1-2009 Mechanical vibration, shock and condition monitoring - Vocabulary

British Standards Institution (BSI)

PD IEC/TS 62782:2016 Photovoltaic (PV) modules. Cyclic (dynamic) mechanical load testing
BS ISO 11359-3:2019 Plastics. Thermomechanical analysis (TMA). Determination of penetration temperature
PD IEC/TR 62343-6-5:2014 Dynamic modules. Design guide. Investigation of operating mechanical shock and vibration tests for dynamic modules
BS ISO 6395:2008 Earth-moving machinery - Determination of sound power level - Dynamic test conditions
BS ISO 6395:2008(2009) Earth - moving machinery — Determination of sound power level — Dynamic test conditions
BS ISO 6395:2009 Earth-moving machinery. Determination of sound power level. Dynamic test conditions
BS EN ISO 6721-1:2011 Plastics. Determination of dynamic mechanical properties. General principles
BS ISO 13373-2:2016 Condition monitoring and diagnostics of machines. Vibration condition monitoring. Processing, analysis and presentation of vibration data
BS ISO 18437-5:2011 Mechanical vibration and shock. Characterization of the dynamic mechanical properties of visco-elastic materials. Poisson ratio based on comparison between measurements and finite element analysis
BS ISO 18649:2004 Mechanical vibration - Evaluation of measurement results from dynamic tests and investigations on bridges
BS ISO 11359-1:2023 Plastics. Thermomechanical analysis (TMA). General principles
BS ISO 20958:2013 Condition monitoring and diagnostics of machine systems. Electrical signature analysis of three-phase induction motors
BS ISO 2041:2018 Mechanical vibration, shock and condition monitoring. Vocabulary
BS EN 17888-2:2024 Thermal performance of buildings. In situ testing of building test structures - Steady-state data analysis for aggregate heat loss test

SCC

DANSK DS/IEC TS 62782:2016 Photovoltaic (PV) modules - Cyclic (dynamic) mechanical load testing
DIN EN 15433-4 E:2006 Draft Document - Transportation loads - Measurement and analysis of dynamic mechanical loads - Part 4: Data evaluation; German version prEN 15433-4:2005
DIN EN 15433-1 E:2006 Draft Document - Transportation loads - Measurement and analysis of dynamic mechanical loads - Part 1: General requirements; German version prEN 15433-1:2005
05/30143783 DC EN 15433-1. Transportation loads. Measurement and analysis of dynamic mechanical loads. Part 1. General requirements
05/30143758 DC EN 15433-4. Transportation loads. Measurement and analysis of dynamic mechnical loads. Part 4. Data evaluation
DANSK DS/IEC TR 62343-6-5:2014 Dynamic modules - Part 6-5: Design guide - Investigation of operating mechanical shock and vibration tests for dynamic modules
DANSK DS/ISO 6395:2013 Earth-moving machinery - Determination of sound power level - Dynamic test conditions
BS PD IEC/TR 62343-6-5:2011 Dynamic modules-Investigation of operating mechanical shock and vibration tests for dynamic modules
BS ISO 13373-2:2005 Condition monitoring and diagnostics of machines. Vibration condition monitoring-Processing, analysis and presentation of vibration data
BS ISO 11359-1:1999 Plastics. Thermomechanical analysis (TMA)-General principles
DANSK DS/ISO 18437-4:2011 Mechanical vibration and shock - Characterization of the dynamic mechanical properties of visco-elastic materials - Part 4: Dynamic stiffness method
DANSK DS/ISO 13373-2:2016 Condition monitoring and diagnostics of machines - Vibration condition monitoring - Part 2: Processing, analysis and presentation of vibration data
NS-ISO 2041:2009 Mechanical vibration, shock and condition monitoring — Vocabulary
DIN IEC /TS 62782:2017 Photovoltaic (PV) modules - Cyclic (dynamic) mechanical load testing (IEC/TS 62782:2016)
NS-ISO 2041:2018 Mechanical vibration, shock and condition monitoring - Vocabulary
DANSK DS/ISO 2041:2018 Mechanical vibration, shock and condition monitoring – Vocabulary
ISO 6395:2008[F] Earth-moving machinery - Determination of sound power level - Dynamic test conditions [Standard in French]
10/30209919 DC BS ISO 18437-5. Mechanical vibration and shock. Characterization of the dynamic mechanical properties of visco-elastic materials. Part 5. Poisson's ratio based on comparison between measurements and finite element analysis
DANSK DS/EN 60749-4:2002 Semiconductor devices – Mechanical and climatic test methods – Part 4: Damp heat, steady state, highly accelerated stress test (HAST)

Spanish Association for Standardization (UNE)

UNE-ISO 6395:2013 Earth-moving machinery. Determination of sound power level. Dynamic test conditions
UNE-EN 60749-4:2017 Semiconductor devices - Mechanical and climatic test methods - Part 4: Damp heat, steady state, highly accelerated stress test (HAST) (Endorsed by Asociación Española de Normalización in July of 2017.)

Society of Automotive Engineers (SAE)

SAE J1454-1995 Dynamic Durability Testing of Seat Cushions for Off-Road Work Machines
SAE J1454-2023 Dynamic Durability Testing of Seat Cushions for Off-Road Work Machines
SAE J138-1969 Film Analysis Guides for Dynamic Studies of Test Subjects
SAE AIR1823A-2003 Engineering Analysis System (EASY) Computer Program for Dynamic Analysis of Aircraft ECS

International Organization for Standardization (ISO)

ISO 6395:2008 Earth-moving machinery - Determination of sound power level - Dynamic test conditions
ISO 18437-5:2011 Mechanical vibration and shock - Characterization of the dynamic mechanical properties of visco-elastic materials - Part 5: Poisson ratio based on comparison between measurements and finite element analysis
ISO 2041:2009 Mechanical vibration, shock and condition monitoring - Vocabulary
ISO 2041:2018 Mechanical vibration, shock and condition monitoring - Vocabulary

PH-BPS

PNS ISO 6395:2021 Earth-moving machinery - Determination of sound power level - Dynamic test conditions

Standard Association of Australia （SAA）

AS ISO 6395:2020 Earth-moving machinery — Determination of sound power level — Dynamic test conditions

International Electrotechnical Commission (IEC)

IEC TR 62343-6-5:2011 Dynamic modules - Part 6-5: Investigation of operating mechanical shock and vibration tests for dynamic modules

GM Europe

GME 14032-2007 Modal Analysis, Test and Evaluation

American Welding Society (AWS)

WRC 229:1977 Part 1: Dynamic Fracture-Resistance Testing and Methods For Structural Analysis

German Institute for Standardization

DIN ISO 13373-2:2016-11 Condition monitoring and diagnostics of machines - Vibration condition monitoring - Part 2: Processing, analysis and presentation of vibration data (ISO 13373-2:2016)
DIN ISO 13373-5 E:2019-03 Condition monitoring and diagnostics of machines - Vibration condition monitoring - Part 5: Diagnostic techniques for fans and blowers

European Committee for Standardization (CEN)

EN ISO 6721-1:1996 Plastics - Determination of Dynamic Mechanical Properties - Part 1: General Principles (ISO 6721-1 : 1994, Including Technical Corrigendum 1 : 1995)
EN ISO 6721-1:2011 Plastics - Determination of dynamic mechanical properties - Part 1: General principles

South African Bureau of Standard

SANS 2041:2009 Mechanical vibration, shock and condition monitoring - Vocabulary

CEN - European Committee for Standardization

EN ISO 6721-1:2019 Plastics - Determination of dynamic mechanical properties - Part 1: General principles
EN ISO 6721-1:2002 Plastics - Determination of dynamic mechanical properties - Part 1: General principles

SAE - SAE International

SAE J138-2019 Performance Requirements for Motor Vehicle Headlamps
SAE AIR1823B-2011 Engineering Analysis System (EASY) Computer Program for Dynamic Analysis of Aircraft ECS

PT-IPQ

NP 2611-1984 Agricultural machinery. Agricultural and forestry tractors, protective structures, related dynamic and static tests

Others: Thermodynamic Mechanical Analysis,Dynamic Mechanical Thermal Analysis