Normal stress test

Normal stress test, Total:238 items.

The international standard classification for "Normal stress test" includes: Glass in general , Glass in building , Electrical engineering in general , Glass , Medical Sciences and health care facilities in general , Mechanical testing of metals , Hydraulic energy engineering , Wind turbine systems and other alternative sources of energy .

The Chinese standard classification for "Normal stress test" includes: Industrial technical glass , Building glass , Basic standards and general methods , Material and component for instrument and meter , Marking, packaing, transport and storage , Facsimile telegraph equipment , Railway engineering , Railway components , Metal mechanical property test method , Engineering investigation and geotechnical engineering in general , Wind energy .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 5169.19-2006 Fire hazard testing for electric and electronic products - Part 19: Abnormal heat - Mould stress relief distortion test
GB/T 18144-2008 Test method for measurement of stress in glass
GB/T 18144-2000 Test method for measurement of stress in glass
GB/T 7962.6-1987 Colourless optical glass test methods--Edge stress birefringence
GB/T 7962.5-1987 Colourless optical glass test methods--Middle stress birefringence
GB/T 5169.19-2022 Fire hazard testing for electric and electronic products—Part 19: Abnormal heat—Mould stress relief distortion test

Professional Standard - Pharmaceutical Packaging

YBB 0016-2003 Neiyingli Cedingfa Tests for stress
YBB 0016(03)-2003 Internal stress measurement method (trial implementation)

Taiwan Provincial Standard of the People's Republic of China

CNS 17025-2007 General requirements for the competence of testing and calibration laboratories
CNS 17025-2001 General requirements for the competence of testing and calibration laboratories

Professional Standard - Post and Telecommunication

YD/T 511-1992 Standard messages for normal margin of start-stop apparatus

未注明发布机构

SAE AMS6360R-2023 Steel Tubing, Seamless, 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130), Normalized or Stress Relieved
DIN EN 60695-10-3 Fire hazard testing - Part 10-3: Abnormal heat - Mould stress relief distortion test

国家铁路局

TB/T 2487-2016 Subgrade dynamic stress test method

Professional Standard - Railway

TB/T 2692-1996 Test Method for Load-bearing Bending Moment of Prestressed Concrete
TB/T 2487-1994 Test Method for Dynamic Stress of Subgrade Bed

Professional Standard-Ships

CB 3395-1992 Residual Stress Test Method Drilling Strain Release Method
CB/T 3395-2013 Test method for determining residual stresses by the hole-drilling strain-gage method

Group Standards of the People's Republic of China

T/CEEIA 342-2018 Test procedure of wind turbine anti-islanding
T/JMTX 006-2019 General stress test method for bridge cranes
T/CI 190-2023 Test procedures for stress wave propagation characteristics in rock bodies
T/CRS C0202-2021 Code for ln-situ Stress Measurement of Railway Engineering
T/CEC 236-2019 Power Mobile Application Software Test Specification
T/GDAQI 011-2019 Magnetic Memory Testing Method for Stress of Overground Metal Pipeline
T/JMTX 006-2020 General stress test method for bridge cranes
T/CSEE 0209-2021 Guidelines for testing low-voltage power emergency power supply equipment

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 31093-2014 Test method for stress of monocrystalline sapphire ingot

Professional Standard - Water Conservancy

SL 499-2010 standard test method for determining residual stresses by the hole-drilling strain-gage method

Military Standard of the People's Republic of China-General Armament Department

GJB 772.111-1993 Explosives Test Method Tensile Stress-Strain Curve Determination
GJB 772.112-1993 Explosives Test Method Compressive Stress-Strain Curve Determination

Professional Standard - Electricity

DL/T 5367-2007 Code for rock mass stress measurements of hydroelectric and water conservancy engineering
DL/T 2031-2019 Test specification for power mobile application software
DL/T 2524-2022 Electric emergency power equipment testing guidelines

Shanxi Provincial Standard of the People's Republic of China

DB14/T 1324-2016 Technical guidelines for testing existing stress by local release method of prestressed steel strands in highway bridges

Professional Standard - Chemical Industry

HG/T 2724.7-1995 Test method for rubber rubber thread - Determination of tensile stress at modulus

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 36994-2018 Wind turbines—Test procedure of grid adaptability

Institute of Electrical and Electronics Engineers (IEEE)

IEEE 1138/COR 1-2014 Testing and Performance for Optical Ground Wire (OPGW) for Use on Electric Utility Power Lines Corrigendum 1: Stress-Strain Temperature Correction, Aeolian Vibration Velocity
IEEE Std 1138-2009/Cor 1-2014 (Corrigendum to IEEE Std 1138-2009) IEEE Standard for Testing and Performance for Optical Ground Wire (OPGW) Use on Electric Utility Power Lines -- Corrigendum 1: Stress-Strain Temperature Correction, Aeolian Vibration Velocity
IEEE P1138-2009/Cor1/D1, March 2014 IEEE Standard for Testing and Performance for Optical Ground Wire (OPGW) Use on Electric Utility Power Lines -- Corrigendum 1: Stress-Strain Temperature Correction, Aeolian Vibration Velocity

GSO

GSO IEC 60512-6-4:2015 Connectors for electronic equipment - Tests and measurements - Part 6-4: Dynamic stress tests - Test 6d: Vibration (sinusoidal)
BH GSO IEC 60512-6-4:2016 Connectors for electronic equipment - Tests and measurements - Part 6-4: Dynamic stress tests - Test 6d: Vibration (sinusoidal)
GSO IEC 62418:2021 Semiconductor devices - Metallization stress void test
BH GSO IEC 62418:2022 Semiconductor devices - Metallization stress void test

SCC

CEI EN 60512-6-4:2003 Connectors for electronic equipment - Tests and measurements - Part 6-4: Dynamic stress tests - Test 6d: Vibration (sinusoidal)
DANSK DS/EN 60512-6-4:2002 Connectors for electronic equipment - Tests and measurements - Part 6-4: Dynamic stress tests - Test 6d: Vibration (sinusoidal)
NS-EN ISO 15630-3:2019 Steel for the reinforcement and prestressing of concrete - Test methods - Part 3: Prestressing steel (ISO 15630-3:2019, Corrected version 2019-10)
DANSK DS/IEC 60076-10-1/AMD1:2020 Amendment 1 – Power transformers – Part 10-1: Determination of sound levels – Application guide
BS 903-A4:1973 Methods of testing vulcanized rubber.-Determination of compression stress-strain
08/30180164 DC BS EN 62418. Metallization stress void test
BS 903-A4:1957 Methods of testing vulcanized rubber. Determination of compression stress-strain
BS 903-A2:1989 Physical testing of rubber-Determination of tensile stress-strain properties
BS 2011-2.1FC:1983 Environmental testing. Tests-Test Fc. Vibration (sinusoidal)
UNE-EN 445:1996 GROUT FOR PRESTRESSING TENDONS. TEST METHODS.
BS 903-A2:1995 Physical testing of rubber-Method for determination of tensile stress-strain properties
DANSK DS/EN IEC 63251:2023 Test method for mechanical properties of flexible opto-electric circuit boards under thermal stress
AENOR UNE 21082:1983 PRESTRESSED REINFORCED CONCRETE POSTS. MANUFACTURING AND TESTING
CEI EN 62418:2011 Semiconductor devices - Metallization stress void test
BS 903-A2:1956 Methods of testing vulcanized rubber. Determination of tensile stress-strain properties
DANSK DS/EN 14977:2006 Copper and copper alloys - Detection of tensile stress - 5 % ammonia test
DANSK DS/EN 62418:2010 Semiconductor devices - Metallization stress void test
AENOR UNE 5007-1:1951 NORMAL TEMPERATURE. NORMAL PRESSURE. NORMAL STATE. DEFINITIONS
AENOR UNE 5007-2:1951 NORMAL TEMPERATURE. NORMAL PRESSURE. NORMAL STATE. CLARIFICATIONS
AENOR UNE-EN ISO 15630-3:2011 Steel for the reinforcement and prestressing of concrete - Test methods - Part 3: Prestressing steel (ISO 15630-3:2010)
BS 903-A2:1971 Methods of testing vulcanized rubber.-Determination of tensile stress-strain properties
NS-EN 14977:2006 Copper and copper alloys — Detection of tensile stress — 5 % ammonia test
BS PD ISO/PAS 5672:2023 Robotics. Collaborative applications. Test methods for measuring forces and pressures in human-robot contacts
BS 903-A42:1983 Methods of testing vulcanized rubber.-Determination of stress relaxation
DIN 53504 E:2015 Draft Document - Testing of rubber - Determination of tensile strength at break, tensile stress at yield, elongation at break and stress values in a tensile test
AMCA 240-22 Laboratory Methods of Testing Positive Pressure Ventilators for Aerodynamic Performance Rating

Danish Standards Foundation

DS/EN 60512-6-4:2002 Connectors for electronic equipment - Tests and measurements - Part 6-4: Dynamic stress tests - Test 6d: Vibration (sinusoidal)
DS/IEC 60076-10-1:2020 Amendment 1 – Power transformers – Part 10-1: Determination of sound levels – Application guide
DS/ISO/IEC 10373-6/Amd 2:2013 Identification cards - Test methods - Part 6: Proximity cards - AMENDMENT 2: Test methods for electromagnetic disturbance
DS 13081:1959 Prestressed reinforcing wire. Testing
DS/EN 62418:2010 Semiconductor devices - Metallization stress void test
DS/ISO/IEC 10373-6/Amd 1:2012 Identification cards - Test methods - Part 6: Proximity cards - AMENDMENT 1: Additional PICC classes

Association Francaise de Normalisation

NF EN 60512-6-4:2002 Connectors for electronic equipment - Tests and measurements - Part 6-4: dynamic stress tests - Test 6d: vibrations (sinusoidal)
NF C93-400-6-4*NF EN 60512-6-4:2002 Connectors for electronic equipment - Tests and measurements - Part 6-4 : dynamic stress tests - Test 6d : vibration (sinusoidal).
NF EN ISO 16047/A1:2013 Fasteners - Torque/tension tests - Amendment 1
NF T46-043:1983 Vulcanized rubber. Determination of compression stress relaxation at normal and elevated temperatures (annular test-pieces).
NF T46-044:1983 Vulcanized rubber. Determination of compression stress relaxation at normal and elevated temperatures (cylindrical test-pieces).
NF EN 445:2007 Grout for prestressing cable - Test methods
NF T46-043-1/A1:2013 Rubber, vulcanized or thermoplastic - Determination of stress relaxation in compression - Part 1: testing at constant temperature - Amendment 1 : revised calibration schedule
NF A05-302:2014 Prestressing steels - Stress corrosion test in distilled water
NF A05-302:1981 Prestressing members. Stress corrosion test in distilled water.
NF G07-102:1987 Textiles. Testing of knitted fabrics. Methods of stress release and measurement of dimensional changes on stress release.

British Standards Institution (BSI)

BS EN 60512-6-4:2002 Connectors for electronic equipment - Tests and measurements - Dynamic stress tests - Test 6d - Vibration (sinusoidal)
BS IEC 62880-1:2017 Semiconductor devices. Stress migration test standard - Copper stress migration test standard
BS EN ISO 15630-3:2019 Steel for the reinforcement and prestressing of concrete. Test methods. Prestressing steel
BS 3518-3:1963(2009) Methods of Fatigue Testing — Part 3 : Direct stress fatigue tests
24/30459398 DC BS EN ISO 15630-3 Steel for the reinforcement and prestressing of concrete — Test methods - Part 3: Prestressing steel
BS EN ISO 7539-7:2005 Corrosion of metals and alloys - Stress corrosion testing - Method for slow strain rate testing

Society of Automotive Engineers (SAE)

SAE AIR5436A-2019 Test Cell Analytical Thrust Correction
SAE AIR5436-2012 Test Cell Analytical Thrust Correction
SAE AMS5077F-2001 Steel Tubing, Welded (0.22 - 0.28C) (SAE 1025) Normalized or Stress Relieved UNS G10250
SAE AMS5077F-2006 Steel Tubing, Welded (0.22 - 0.28C) (SAE 1025) Normalized or Stress Relieved
SAE AMS6365K-2018 Steel Tubing, Seamless 0.95Cr - 0.20Mo (0.33 - 0.38C) (SAE 4135) Normalized or Stress Relieved
SAE AMS6360L-2009 Steel Tubing, Seamless 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130) Normalized or Stress Relieved
SAE AMS6365K-2014 Steel Tubing, Seamless, 0.95Cr - 0.20Mo (0.33 - 0.38C) (SAE 4135), Normalized or Stress Relieved
SAE AMS6365L-2014 Steel Tubing, Seamless 0.95Cr - 0.20Mo (0.33 – 0.38C) (SAE 4135) Normalized or Stress Relieved
SAE AMS6365H-1994 STEEL TUBING, SEAMLESS 0.95Cr - 0.20Mo (0.33 - 0.38) (SAE 4135) Normalized or Stress Relieved
SAE AMS6365J-2010 Steel Tubing, Seamless 0.95Cr - 0.20Mo (0.33 - 0.38C) (SAE 4135) Normalized or Stress Relieved
SAE AMS6365J-2001 Steel Tubing, Seamless 0.95Cr - 0.20Mo (0.33 - 0.38C) (SAE 4135) Normalized or Stress Relieved UNS G41350
SAE ARP4024-2020 Aircraft/Engine Fuel Pump Net Positive Suction Pressure Performance Test and Evaluation
SAE AMS6360K-2000 Steel Tubing, Seamless 0.95Cr 0.20Mo (0.28-0.33C) (SAE 4130) Normalized or Stress Relieved
SAE AMS6360M-2013 Steel Tubing, Seamless, 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130), Normalized or Stress Relieved
SAE ARP4024-1994 Aircraft/Engine Fuel Pump Net Positive Suction Pressure Performance Test and Evaluation

Standard Association of Australia （SAA）

AS 60695.10.3:2006 Fire hazard testing - Abnormal heat - Mould stress relief distortion test
AS 4441(Int)/AMD 1:2004 Oriented PVC(PVC-O)pipes for pressure applications Amendment 1
AS/NZS 4672.2:2007 Steel prestressing materials - Testing requirements

AENOR

UNE-EN 60512-6-4:2002 Connectors for electronic equipment - Tests and measurements -- Part 6-4: Dynamic stress tests - Test 6d: Vibration (sinusoidal).

American Society of Mechanical Engineers (ASME)

ASME STP-NU-059-2013 CORRECTIONS TO STAINLESS STEEL ALLOWABLE STRESSES
ASME STP-PT-073-2014 STRESS INTENSITY FACTOR AND K-FACTOR ALIGNMENT FOR METALLIC PIPES
ASME STP-NU-063-2013 CORRECT AND EXTEND ALLOWABLE STRESS VALUES FOR 304 AND 316 STAINLESS STEEL

Electronic Components, Assemblies and Materials Association

ECA IS-749-1998 Rectified Mains Application Expected Wear-Out Lifetime Test
ECA EIA-364-04A-2002 TP-04A Normal Force Test Procedure for Electrical Connectors

German Institute for Standardization

DIN EN 60512-6-4:2003-01 Connectors for electronic equipment - Tests and measurements - Part 6-4: Dynamic stress tests; Test 6d: Vibration (sinusoidal) (IEC 60512-6-4:2002); German version EN 60512-6-4:2002 / Note: DIN IEC 60512-4 (1994-05) remains valid alongside this standar...
DIN EN 60695-10-3:2003 Fire hazard testing - Part 10-3: Abnormal heat; Mould stress relief distortion test (IEC 60695-10-3:2002); German version EN 60695-10-3:2002
DIN 53369:1976-02 Testing of plastic films; determination of the shrinking stress
DIN EN 14067-4:2019 Railway applications - Aerodynamics - Part 4: Requirements and test procedures for aerodynamics on open track (includes Amendment A1:2018)
DIN EN 14067-6:2022 Railway applications - Aerodynamics - Part 6: Requirements and test procedures for cross wind assessment (includes Amendment A1:2022)
DIN 53504:2017-03 Testing of rubber - Determination of tensile strength at break, tensile stress at yield, elongation at break and stress values in a tensile test
DIN 53323:1974-01 Testing of leather; determination of the stress-strain behaviour during vaulting and bursting test
DIN EN ISO 7539-7:2018-05 Corrosion of metals and alloys - Stress corrosion testing - Part 7: Method for slow strain rate testing (ISO 7539-7:2005); German version EN ISO 7539-7:2005
DIN EN 62418:2010-12 Semiconductor devices - Metallization stress void test (IEC 62418:2010); German version EN 62418:2010
DIN EN 14977:2006-09 Copper and copper alloys - Detection of tensile stress - 5 % ammonia test; German version EN 14977:2006
DIN EN 60512-6-4:2003 Connectors for electronic equipment - Tests and measurements - Part 6-4: Dynamic stress tests; Test 6d: Vibration (sinusoidal) (IEC 60512-6-4:2002); German version EN 60512-6-4:2002

Korean Agency for Technology and Standards (KATS)

KS C IEC 60512-6-4-2003(2008) Connectors for electronic equipment－Tests and measurements－Part 6－4：Dynamic stress tests－Test 6d：Vibration(sinusoidal)
KS C IEC 60512-6-4:2003 Connectors for electronic equipment-Tests and measurements-Part 6-4:Dynamic stress tests-Test 6d:Vibration(sinusoidal)
KS C IEC 60512-6-4-2014 Connectors for electronic equipment－Tests and measurements－Part 6－4：Dynamic stress tests－Test 6d：Vibration(sinusoidal)
KS C IEC 60512-6-4:2014 Connectors for electronic equipment－Tests and measurements－Part 6－4：Dynamic stress tests－Test 6d：Vibration(sinusoidal)
KS B 0951-2008 Instrumented indentation tests on welds in steel－Measurement of residual stress on welded joints
KS D 0236-2003(2018) Stress corrosion cracking test for stainless steels
KS M 6694-2003(2018) Stress relief test method for cross-linked rubber
KS D 0236-1986 Stress corrosion cracking test for stainless steels
KS M 6785-2022 Testing methods of stressstrain properties at low deformation for vulcanized rubber
KS M 6785-1994 Testing methods of stress-strain properties at low deformation for vulcanized rubber
KS D 0286-2005 Standard test method for determinig residual stresses by the hole-drilling strain-gage method
KS D 0286-2020 Standard test method for determinig residual stresses by the hole-drilling strain-gage method
KS D 0286-2005(2020) Standard test method for determinig residual stresses by the hole-drilling strain-gage method
KS B ISO 9085:2004 Calculation of load capacity of spur and helical gears - Application for industrial gears

IEEE - The Institute of Electrical and Electronics Engineers@ Inc.

IEEE 1138 CORR 1-2014 Testing and Performance for Optical Ground Wire (OPGW) for Use on Electric Utility Power Lines Corrigendum 1: Stress-Strain Temperature Correction@ Aeolian Vibration Velocity

International Electrotechnical Commission (IEC)

IEC 60512-6-4:2002 Connectors for electronic equipment - Tests and measurements - Part 6-4: Dynamic stress tests; Test 6d: Vibration (sinusoidal)
IEC 62880-1:2017 Semiconductor devices - Stress migration test standard - Part 1: Copper stress migration test standard
IEC 60695-10-3:2016 Fire hazard testing - Part 10-3: Abnormal heat - Mould stress relief distortion test
IEC 60695-10-3:2002 Fire hazard testing - Part 10-3: Abnormal heat; Mould stress relief distortion test

Japanese Industrial Standards Committee (JISC)

JIS C 5402-6-4:2005 Connectors for electronic equipment -- Tests and measurements -- Part 6-4: Dynamic stress tests -- Test 6d: Vibration (sinusoidal)
JIS Q 17025:2005 General requirements for the competence of testing and calibration laboratories
JIS C 60695-10-3:2005 Fire hazard testing -- Part 10-3: Abnormal heat -- Mould stress relief distortion test
JIS C 60695-10-3:2021 Fire hazard testing -- Part 10-3: Abnormal heat -- Mould stress relief distortion test
JIS Q 17025:2000 General requirements for the competence of testing and calibration laboratories

BE-NBN

NBN I 10-203-1987 Prestressed steel. Fatigue test
NBN I 10-202-1980 Prestressed steel. Isothermal relaxation test
NBN I 10-205-1986 Prestressed steel. Alternate bending test of metal wire
NBN I 10-206-1989 Prestressing members - Ammonium thiocyanate corrosion test

CZ-CSN

CSN ISO 1352:1994 Steel.Torsional stress fatique testing
CSN 70 0534-1981 Glass. Method for testing of internal stress in glass products
CSN ISO 7539-7:1994 Corrosion of metals and alloys.Stress corrosion testing.Part 7:Slow strain rate testing
CSN 63 1509-1985 Determination of force variation at iadial stress

RO-ASRO

STAS 11399-1980 Tests of metals TORSIONAL STRESS TESTING
STAS 12072-1982 Testing of metals TESTING OF PLATED STEELS AT SHEARING STRENGTH
STAS 10208-1975 ICE-HOCKEY STICKS Test ol strength to mechanical stresses
STAS 7209-1987 Tests of metals RELAXATION TEST OF WIRES AND WIRE PRODUCTS FOR PRE- STRESSED CONCRETE

ANSI - American National Standards Institute

INCITS/ISO/IEC 10373-6 AMD 1:2007 Identification cards — Test methods — Part 6: Proximity cards — Amendment 1: Protocol test methods for proximity
INCITS/ISO/IEC 10373-6 AMD 4:2006 Identification cards — Test methods — Part 6: Proximity cards — Amendment 4: Additional test methods for PCD RF

AGMA - American Gear Manufacturers Association

91FTMS1-1991 Finite Element Stress Analysis of a Genetic Spur Gear Tooth

European Committee for Electrotechnical Standardization（CENELEC）

EN 60695-10-3:2016 Fire hazard testing - Part 10-3: Abnormal heat - Mould stress relief distortion test
EN 60512-6-4:2002 Connectors for Electronic Equipment - Tests and Measurements - Part 6-4: Dynamic Stress Test 6d: Vibration (Sinusoidal)
EN 60695-10-3:2002 Fire Hazard Testing Part 10-3: Abnormal Heat Mould Stress Relief Distortion Test
EN 62418:2010 Semiconductor devices - Metallization stress void test

RU-GOST R

GOST 10145-1981 Metals. Stress-rupture test method

Military Standards (MIL-STD)

DOD A-A-51217-1985 CHART, VISION ACUITY TESTING, ASTIGMATIC DIAL, GREEN

AT-ON

ONORM S 7017-1985 Testing ofleather; determination of the behaviour against water under dynamic stress;permeometer Essai du cuir; determination du comportement a l'eau sous effort d'oscillation; permeometre
ONORM S 7018-1985 Tesüng ofleather; determination of the behaviour against water under dynamic stress; penetrometer Essai du cuir; determination du comportement a l'eau sous effort d'oscillation; penetrometre
ONORM EN 445-1996 Grout for prestressing tendons-Test methods

SAE - SAE International

SAE AMS5077E-1989 Steel Tubing@ Welded (0.22 - 0.28C) (SAE 1025) Normalized or Stress Relieved
SAE AMS5077G-2009 Steel Tubing@ Welded (0.22 - 0.28C) (SAE 1025) Normalized or Stress Relieved (UNS G10250)
SAE AMS6360N-2018 Steel Tubing@ Seamless 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130) Normalized or Stress Relieved (UNS G41300)
SAE AMS6360P-2018 Steel Tubing@ Seamless 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130) Normalized or Stress Relieved (UNS G41300)
SAE AMS6360J-1990 Steel Tubing@ Seamless 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130) Normalized or Stress Relieved (UNS G41300)
SAE AMS6365L-2018 Steel Tubing@ Seamless 0.95Cr - 0.20Mo (0.33 - 0.38C) (SAE 4135) Normalized or Stress Relieved (UNS G41350)
SAE AMS6360H-1984 STEEL TUBING@ SEAMLESS 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130) Normalized or stress Relieved (UNS G41300)

SE-SIS

SIS 11 23 11-1973 Determination of lower yield stress, proof stress and proving test for steel at elevated temperatures
SIS 11 23 11-1966 Determination of lower yield stress, proof stress and proving test for steel at elevated temperatures
SIS 11 01 28-1969 Sampling for testing of reinforcing steel for prestressed ronrrete
SIS 11 71 01-1970 Stress corrosion test for copper alloys using mercurous nitrate

Indonesia Standards

SNI 07-6735-2002 Test methods for determining residual stresses by the hole-drilling strain-gage methods

ES-UNE

UNE-EN ISO 15630-3:2019 Steel for the reinforcement and prestressing of concrete - Test methods - Part 3: Prestressing steel (ISO 15630-3:2019, Corrected version 2019-10)
UNE-EN 62418:2010 Semiconductor devices - Metallization stress void test (Endorsed by AENOR in October of 2010.)

American Society for Testing and Materials (ASTM)

ASTM E837-08e1 Standard Test Method for Determining Residual Stresses by the Hole-Drilling Strain-Gage Method
ASTM E837-01 Standard Test Method for Determining Residual Stresses by the Hole-Drilling Strain-Gage Method
ASTM E837-20 Standard Test Method for Determining Residual Stresses by the Hole-Drilling Strain-Gage Method
ASTM D4633-86 Test Method For Stress Wave Energy Measurment For Dynamic Penetrometer Testing Systems
ASTM E2566-17a Standard Test Method for Evaluating Response Robot Sensing: Visual Acuity
ASTM E837-08 Standard Test Method for Determining Residual Stresses by the Hole-Drilling Strain-Gage Method
ASTM E837-99 Standard Test Method for Determining Residual Stresses by the Hole-Drilling Strain-Gage Method
ASTM E837-01e1 Standard Test Method for Determining Residual Stresses by the Hole-Drilling Strain-Gage Method
ASTM E837-13 Standard Test Method for Determining Residual Stresses by the Hole-Drilling Strain-Gage Method
ASTM E837-08e2 Standard Test Method for Determining Residual Stresses by the Hole-Drilling Strain-Gage Method
ASTM D4945-12 Standard Test Method for High-Strain Dynamic Testing of Deep Foundations
ASTM D945-92(2001)e1 Standard Test Methods for Rubber Properties in Compression or Shear (Mechanical Oscillograph)

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association

JEDEC JEP153A-2014 Characterization and Monitoring of Thermal Stress Test Oven Temperatures
JEDEC JESD22-A110E-2015 Highly Accelerated Temperature and Humidity Stress Test (HAST)
JEDEC JESD22-A110C-2009 Highly Accelerated Temperature and Humidity Stress Test (HAST)
JEDEC JESD22-A110D-2010 Highly Accelerated Temperature and Humidity Stress Test (HAST)

ES-AENOR

UNE 68-028-1986 Correction factors in power test of agricultural tractor power take-off

PL-PKN

PN H04735-1992 Copper alloys. Ammonia test for stress corrosion resistance

National Aeronautics and Space Administration (NASA)

NASA NACA-TN-2924-1953 Combined-stress fatigue strength of 76S-T61 aluminum alloy with superimposed mean stresses and corrections for yielding

International Organization for Standardization (ISO)

ISO/R 783:1968 Mechanical testing of steel at elevated temperatures — Determination of lower yield stress and proof stress and proving test
ISO 3384-1:2011/Amd 1:2013 Rubber, vulcanized or thermoplastic - Determination of stress relaxation in compression - Part 1: Testing at constant temperature - Amendment 1: Revised calibration schedule
ISO/CD PAS 5672 Robotics — Collaborative applications — Test methods for measuring forces and pressures in human-robot contacts

IN-BIS

IS 4713-1968 Methods for determination of low yield stress, proof stress and verification tests of steel at high temperatures

ISA - International Society of Automation

ISA S37.8-1975 Specifications and Tests for Strain Gage Force Transducers
ISA S37.8-1982 Specifications and Tests for Strain Gage Force Transducers
ISA S37.3-1982 Specifications and Tests for Strain Gage Pressure Transducers
ISA S37.3-1975 Specifications and Tests for Strain Gage Pressure Transducers
ISA 37.3-1982 Specifications and Tests for Strain Gage Pressure Transducers

American National Standards Institute （ANSI)

ANSI/ASTM E328:1986 Methods for Stress Relaxation Tests for Materials and Structures
ANSI/EIA 364-04A:2001 TP-04, Normal Force Test Procedure for Electrical Connectors

VN-TCVN

TCVN 4552-2009 Applied statistics.Estimation, confidence intervals and testing for parameters of normal distribution

WRC - Welding Research Council

BULLETIN 227-1977 TEST OF TORISPHERICAL PRESSURE VESSEL HEADS CONVEX TO PRESSURE; REFERENCE STRESS CONCEPTS FOR CREEP ANALYSIS

GOST

GOST IEC 60695-10-3-2018 Fire hazard testing. Part 10-3. Excessive heat. Mould stress relief distortion test

Aerospace Industries Association

AIA NASM1312-9-1997 Fastener Test Methods; Method 9 Stress Corrosion
AIA NASM1312-10-1997 Fastener Test Methods; Method 10 Stress Rupture

AIA/NAS - Aerospace Industries Association of America Inc.

NASM1312-10-1997 Fastener Test Methods; Method 10 Stress Rupture
NASM1312-9-1997 Fastener Test Methods; Method 9 Stress Corrosion
NASM1312-17-1997 Fastener Test Methods; Method 17 Stress Relaxation
NASM1312-5-1997 Fastener Test Methods; Method 5 Stress Durability

GM North America

GM GM9302P-1991 Test for Stress Mark Susceptibility of Plastic Materials

The American Road & Transportation Builders Association

AASHTO T 298-1999 Standard Method of Test for High-Strain Dynamic Testing of Piles

PT-IPQ

NP 3858-1991 Asbestos-cement pipes Field pressure testing

CL-INN

INDITECNOR 2.3-3ch-1949 Correct test symbols

European Committee for Standardization (CEN)

prEN ISO 15630-3 Steel for the reinforcement and prestressing of concrete - Test methods - Part 3: Prestressing steel (ISO/DIS 15630-3:2024)

Canadian Standards Association (CSA)

CAN/CSA-ISO/IEC 10373A-6:2012 Identification cards - Test methods - Part 6: Proximity cards AMENDMENT 1: Additional PICC classes

U.S. Air Force

AIR FORCE MIL-STD-859 A-1968 STANDARD CALIBRATION TABLE FOR AERONAUTICAL PRESSURE MEASURING EQUIPMENT
AIR FORCE MIL-STD-859 A REINST NOTICE 3-2006 STANDARD CALIBRATION TABLE FOR AERONAUTICAL PRESSURE MEASURING EQUIPMENT

Canadian General Standards Board （CGSB)

CGSB 1-GP-71 METH 87.2-1974 Methods of Testing Paints and Pigments Reactivity Pressure Build-up Test

Institute of Interconnecting and Packaging Electronic Circuits (IPC)

IPC TR-486-2001 Report on Round Robin Study to Correlate Interconnect Stress Test (IST) with Thermal Stress/Microsectioning Evaluations for Detecting the Presence of Inner-Layer Seperations

American Concrete Institute

ACI SP-201-2001 Fracture Mechanics for Concrete Materials: Testing and Applications