High vacuum volume design

High vacuum volume design, Total:142 items.

The international standard classification for "High vacuum volume design" includes: Vacuum technology , Fluid storage devices , Cryogenic vessels , Cans. Tins. Tubes , Tobacco, tobacco products and related equipment , Power stations in general .

The Chinese standard classification for "High vacuum volume design" includes: Vacuum technique and equipment , Pressure vessel , Gas separation and liquefaction equipment , Packaging material and container , Refrigeration equipment , Tobacco curing in general , Electric power testing technique .

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 34876-2017 Vacuum technology-Vacuum gauges-Evaluation of the uncertainties of results of calibrations by direct comparison with a reference gauge
GB/T 33633-2017 Vacuum technology―Positive-displacement vacuum pump―Measurement of water vapour tolerance

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 31480-2015 Materials for high vacuum multilayer insulation of cryogenic vessel
GB/T 19956.1-2005 Positive-displacement cacuum pumps-Measurement of performance characteristics Part1:Measurement of volume rate of flow(pumping speed)
GB/T 16876-1997 Test methods for interspace vacuum of liquid nitrogen containers
GB/T 43916-2024 Vacuum technology—Vacuum gauges—Specifications, calibration and measurement uncertainties for capacitance diaphragm gauges
GB/T 18442.3-2011 Stationary Vacuum Thermal-Insulating Cryogenic Pressure Vessel Part 3：Design
GB/T 18443.8-2010 Testing method of performance for vacuum insulation cryogenic equipment—Part 8:Volume measurement

Professional Standard - Machinery

JB/T 8107-1999 Methods of measurement for mechanical vibation of positive - displacement vacuum pumps
JB/T 8107-2011 Positive-displacement vacuum pump─Measuring methods for mechanical vibration
JB/T 8106-1999 Methods of measurement for noise emitted by positive - displacement vacuum pumps
JB/T 7266-1994 Method for Measuring the Performance of Positive Displacement Vacuum Pumps

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 18442.3-2019 Static vacuum insulated cryogenic pressure vessels—Part 3:Design
GB/T 40344.2-2021 Vacuum technology—Standard methods for measuring vacuum-pump performance— Part 2：Positive displacement vacuum pumps

Professional Standard - Tobacco

YC/T 473-2013 Determination of apparent density,true density and inner pore volume of cut tobacco

National Metrological Technical Specifications of the People's Republic of China

JJF 1503-2015 Calibration Specification for Capacitance Diaphragm Vacuum Gauges

工业和信息化部

JB/T 13366-2018 Vacuum technology-Power capacitor vacuum drying & impregnating equipment

Professional Standard - Electricity

DL/T 846.9-2004 General technical specifications for high voltage test equipments Part 9: Vacuum interrupter detector

Professional Standard - Light Industry

QB 6008-1995 Specifications for design of vacuum salt plant
QB/T 6008-2023 Design code for vacuum salt factory
QB/T 6008-1995 Design code for vatuum Salt factory

GSO

GSO ISO 20146:2021 Vacuum technology — Vacuum gauges — Specifications, calibration and measurement uncertainties for capacitance diaphragm gauges
BH GSO ISO 20146:2022 Vacuum technology — Vacuum gauges — Specifications, calibration and measurement uncertainties for capacitance diaphragm gauges
GSO ISO 21009-1:2016 Cryogenic vessels -- Static vacuum-insulated vessels -- Part 1: Design, fabrication, inspection and tests
OS GSO ISO 21009-1:2016 Cryogenic vessels -- Static vacuum-insulated vessels -- Part 1: Design, fabrication, inspection and tests
GSO ISO 24477:2024 Vacuum technology — Vacuum gauges — Specifications, calibration and measurement uncertainties for spinning rotor gauges

IT-UNI

UNI ISO 20146:2020 Vacuum technology -- Vacuum gauges -- Specifications, calibration and measurement uncertainties for capacitance diaphragm gauges
UNI 4661-1961 Pressure gauge, vacuum gauge and vacuum pressure gauge. Dials for concentrically graduated pressure gauges, vacuum gauges and vacuum manometers
UNI 4662-1961 Pressure gauge, vacuum gauge and vacuum pressure gauge. Eccentric scale pressure gauges, vacuum gauges and dials for vacuum pressure gauges
UNI 4663-1961 Pressure gauge, vacuum gauge and vacuum pressure gauge. The scale of the dial
UNI ISO 21360-2:2020 Vacuum technology -- Standard methods for measuring vacuum-pump performance - Part 2: Positive displacement vacuum pumps
UNI 4664-1961 Pressure gauge, vacuum gauge and vacuum pressure gauge. Concentric scale pressure gauges, vacuum gauges and pointers of vacuum manometers
UNI 4660-1961 Pressure gauge, vacuum gauge and vacuum pressure gauge. Concentric scale pressure gauge, vacuum gauge and vacuum pressure gauge. Sleeve diameters are 80 and 250mm
UNI 4659-1961 Pressure gauge, vacuum gauge and vacuum pressure gauge. Eccentric scale pressure gauge and vacuum gauge. Sleeve diameter 50 and 63mm' type
UNI 4658-1961 Pressure gauge, vacuum gauge and vacuum pressure gauge. Concentric scale pressure gauge and vacuum gauge. Sleeve diameters are 50 and 63mm
UNI ISO 19685:2020 Vacuum technology -- Vacuum gauges -- Specifications, calibration and measurement uncertainties for Pirani gauges

Japanese Industrial Standards Committee (JISC)

JIS B 8316:1994 Positive-displacement vacuum pumps -- Test methods
JIS B 8316-1:1999 Positive-displacement vacuum pumps -- Measurement of performance characteristics -- Part 1: Measurement of volume rate of flow (pumping speed)

Association Francaise de Normalisation

NF X10-512:1975 Vacuum technology - Positive-displacement vacuum pumps - Measurement of ultimate pressure.
NF E86-502-2*NF EN 13530-2:2003 Cryogenic vessels - Large transportable vacuum insulated vessels - Part 2 : design, fabrication, inspection and testing
NF X10-515:1971 Vacuum technology. Vapour vacuum pumps. Measurement of the volume rate of flow (pumping speed).
NF ISO 27893:2013 Vacuum technique - Vacuum pressure gauges - Evaluation of the uncertainty of calibration results by direct comparison with a reference pressure gauge
NF E86-504-2*NF EN 13458-2:2003 Cryogenic vessels - Static vacuum insulated vessels - Part 2 : design, fabrication, inspection and testing.

British Standards Institution (BSI)

BS ISO 21360-2:2012 Vacuum technology. Standard methods for measuring vacuum-pump performance. Positive displacement vacuum pumps
BS EN 1251-2:2000 Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1000 litres volume - Design, fabrication, inspection and testing
BS ISO 20146:2019 Vacuum technology. Vacuum gauges. Specifications, calibration and measurement uncertainties for capacitance diaphragm gauges
BS ISO 21009-1:2008 Cryogenic vessels - Static vacuum-insulated vessels - Design, fabrication, inspection and tests
BS ISO 24477:2022 Vacuum technology.Vacuum gauges.Specifications, calibration and measurement uncertainties for spinning rotor gauges
BS EN 14197-2:2003+A1:2006 Cryogenic vessels - Static non-vacuum insulated vessels - Part 2: Design, fabrication, inspection and testing
BS EN 13458-2:2002(2008) Cryogenic vessels - Static vacuum insulated vessels - Design, fabrication, inspection and testing
BS EN 14197-2:2003 Cryogenic vessels - Static non-vacuum insulated vessels - Design, fabrication, inspection and testing
BS EN 13458-2:2002 Cryogenic vessels - Static vacuum insulated vessels - Design, fabrication, inspection and testing
BS 4479-9:1990 Design of articles that are to be coated - Recommendations for low pressure and vacuum deposited coatings
BS EN 13530-2:2002 Cryogenic vessels - Large transportable vacuum insulated vessels - Design, fabrication, inspection and testing
BS EN 13530-2:2002(2008) Cryogenic vessels - Large transportable vacuum insulated vessels - Design, fabrication, inspection and testing
BS EN 1251-3:2000 Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1000 litres volume - Operational requirements
BS ISO 20421-1:2006 Cryogenic vessels - Large transportable vacuum-insulated vessels - Design, fabrication, inspection and testing
BS EN ISO 21029-2:2015 Cryogenic vessels. Transportable vacuum insulated vessels of not more than 1 000 litres volume. Operational requirements
BS 3423:1986(2007) Recommendations for Design of glass vacuum vessels (including desiccators) for laboratory use
BS ISO 20421-1:2019+A1:2022 Cryogenic vessels. Large transportable vacuum-insulated vessels - Design, fabrication, inspection and testing
BS EN 1251-1:2000 Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1000 litres volume - Fundamental requirements
BS EN 14398-2:2003+A2:2008 Cryogenic vessels - Large transportable non-vacuum insulated vessels - Design, fabrication, inspection and testing
BS ISO 21009-1:2022 Cryogenic vessels — Static vacuum-insulated vessels - Part 1: Design, fabrication, inspection and tests
BS EN ISO 9100-7:2005 Glass containers - Vacuum lug finishes - 58 deep
BS ISO 19685:2017 Vacuum technology. Vacuum gauges. Specifications, calibration and measurement uncertainties for Pirani gauges

ZA-SANS

SANS 5906:1978 Bulk density, bulk volume, apparent porosity, and apparent relative density of dense refractory bricks (evacuation method)
SANS 982:1990 High-pressure high-vacuum steam sterilizers (autoclaves)
SANS 5905:1978 Bulk density of dense refractory bricks (mercury balance method)
SANS 5845:2006 Bulk densities and voids content of aggregates

RU-GOST R

GOST R 53335-2009 Vacuum equipment. Positive-displacement vacuum pumps. Measurement of performance characteristics. Part 1. Measurement of volume rate of flow (pumping speed)

International Organization for Standardization (ISO)

ISO 20146:2019 Vacuum technology — Vacuum gauges — Specifications, calibration and measurement uncertainties for capacitance diaphragm gauges
ISO 21360-2:2020 Vacuum technology — Standard methods for measuring vacuum-pump performance — Part 2: Positive displacement vacuum pumps
ISO 21029-1:2018/Amd 1:2019 Cryogenic vessels — Transportable vacuum insulated vessels of not more than 1 000 litres volume — Part 1: Design, fabrication, inspection and tests — Amendment 1
ISO 19685:2017 Vacuum technology - Vacuum gauges - Specifications, calibration and measurement uncertainties for Pirani gauges
ISO 5017:1988 Dense shaped refractory products; determination of bulk density, apparent porosity and true porosity
ISO 10046:1996 Aircraft - Methodology of calculating cargo compartment volumes
ISO 1607-1:1993 Positive-displacement vacuum pumps; measurement of performance characteristics; part 1: measurement of volume rate of flow (pumping speed)
ISO 1608-1:1980 Vapour vacuum pumps; Measurement of performance characteristics; Part 1 : Measurement of volume rate of flow (pumping speed)
ISO 21009-1:2008 Cryogenic vessels - Static vacuum-insulated vessels - Part 1: Design, fabrication, inspection and tests
ISO 24477:2022 Vacuum technology — Vacuum gauges — Specifications, calibration and measurement uncertainties for spinning rotor gauges
ISO 21009-1:2022 Cryogenic vessels — Static vacuum-insulated vessels — Part 1: Design, fabrication, inspection and tests

German Institute for Standardization

DIN EN 13530-2/A1:2004 Cryogenic vessels - Large transportable vacuum insulated vessels - Part 2: Design, fabrication, inspection and testing; German version EN 13530-2:2002/A1:2004
DIN EN 1251-2 Berichtigung 1:2007-05 Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1000 litres volume - Part 2: Design, fabrication, inspection and testing; German version EN 1251-2:2000, Corrigenda to DIN EN 1251-2:2000-03; German version EN 1251-2:2000/AC:2006
DIN EN 1251-2:2000-03 Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1000 litres volume - Part 2: Design, fabrication, inspection and testing; German version EN 1251-2:2000
DIN EN 1251-2 Berichtigung 1:2007 Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1000 litres volume - Part 2: Design, fabrication, inspection and testing; German version EN 1251-2:2000, Corrigenda to DIN EN 1251-2:2000-03; German version EN 1251-2:2000/AC:2006
DIN 28417:1976 Vacuum technology; measurement of throughput by the volumetric method at constant pressure
DIN EN 13458-2:2003 Cryogenic vessels - Static vacuum insulated vessels - Part 2: Design, fabrication, inspection and testing; German version EN 13458-2:2002
DIN EN 13458-2:2003-02 Cryogenic vessels - Static vacuum insulated vessels - Part 2: Design, fabrication, inspection and testing; German version EN 13458-2:2002
DIN EN 13458-2 Berichtigung 1:2007-07 Cryogenic vessels - Static vacuum insulated vessels - Part 2: Design, fabrication, inspection and testing; German version EN 13458-2:2002, Corrigenda to DIN EN 13458-2:2003-02; German version EN 13458-2:2002/AC:2006

American Society of Mechanical Engineers (ASME)

ASME PTC 9-1970(R1997) Displacement Compressors, Vacuum Pumps and Blowers
ASME PTC 9-1970 Displacement Compressors, Vacuum Pumps And Blowers (PTC 9 - 1970)
ASME PTC 9 Erratum-1972 Displacement compressors, vacuum pumps, and blowers; Erratum

Danish Standards Foundation

DS/EN 1251-2/AC:2007 Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1000 litres volume - Part 2: Design, fabrication, inspection and testing
DS/EN 1251-2:2000 Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1000 litres volume - Part 2: Design, fabrication, inspection and testing
DS/EN 13458-2/AC:2007 Cryogenic vessels - Static vacuum insulated vessels - Part 2: Design, fabrication, inspection and testing
DS/EN 13458-2:2003 Cryogenic vessels - Static vacuum insulated vessels - Part 2: Design, fabrication, inspection and testing

SCC

DANSK DS/EN 1251-2:2000 Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1000 litres volume - Part 2: Design, fabrication, inspection and testing
NS-EN 1251-2:2000 Cryogenic vessels — Transportable vacuum insulated vessels of not more than 1000 litres volume — Part 2: Design, fabrication, inspection and testing
BS ISO 20421-1:2019 Cryogenic vessels. Large transportable vacuum-insulated vessels-Design, fabrication, inspection and testing
DANSK DS/ISO 21009-1:2022 Cryogenic vessels – Static vacuum-insulated vessels – Part 1: Design, fabrication, inspection and tests
AENOR UNE-EN 13458-2:2003 Cryogenic vessels - Static vacuum insulated vessels - Part 2: Design, fabrication, inspection and testing.
DANSK DS/EN 13458-2:2003 Cryogenic vessels - Static vacuum insulated vessels - Part 2: Design, fabrication, inspection and testing
NS-EN 13458-2:2002 Cryogenic vessels — Static vacuum insulated vessels — Part 2: Design, fabrication, inspection and testing

Lithuanian Standards Office

LST EN 1251-2-2002/AC-2006 Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1000 litres volume - Part 2: Design, fabrication, inspection and testing
LST EN 1251-2-2002 Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1000 litres volume - Part 2: Design, fabrication, inspection and testing
LST EN 13458-2-2003 Cryogenic vessels - Static vacuum insulated vessels - Part 2: Design, fabrication, inspection and testing
LST EN 13458-2-2003/AC-2006 Cryogenic vessels - Static vacuum insulated vessels - Part 2: Design, fabrication, inspection and testing

European Committee for Standardization (CEN)

EN 1251-2:2000 Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1000 litres volume - Part 2: Design, fabrication, inspection and testing
EN 13458-2:2002 Cryogenic vessels - Static vacuum-insulated vessels - Part 2: Design, fabrication, inspection and testing

Korean Agency for Technology and Standards (KATS)

KS B 6314-2-2013 Positive-displacement oil-sealed rotary vacuum pumps－Measurement of volume rate of flow(pumping speed)
KS A 0506-4-2002 Methods of calibration for capacitance gauge
KS B ISO 1607-1-2004(2009) Positive-displacement vacuum pumps－Measurement of performance characteristics－Part 1：Measurement of volume rate of flow(pumping speed)
KS B 6314-2002(2017) Positive－displacement oil－sealed rotary vacuum pumps－Measurement of performance characteristics
KS B 6314-1-2002(2022) Positive-displacement oil-sealed rotary vacuum pumps－Measurement of ultimate pressure
KS B 6314-2002(2022) Positive－displacement oil－sealed rotary vacuum pumps－Measurement of performance characteristics
KS A 0081-1989 Measuring methods of low pressures by discharge and ionization vacuum gauges
KS A 0506-3-2002 Methods of calibration for viscosity gauge
KS B ISO 1607-1:2013 Positive-displacement vacuum pumps-Measurement of performance characteristics-Part 1:Measurement of volume rate of flow(pumping speed)
KS B ISO 1608-1:2004 Vapour vacuum pumps-Measurement of performance characteristics-Part 1:Measurement of volume rate of flow(pumping speed)
KS B ISO 1608-1:2013 Vapour vacuum pumps－Measurement of performance characteristics－Part 1：Measurement of volume rate of flow(pumping speed)
KS B ISO 1607-1:2004 Positive-displacement vacuum pumps-Measurement of performance characteristics-Part 1:Measurement of volume rate of flow(pumping speed)
KS B ISO 1607-1-2013 Positive-displacement vacuum pumps－Measurement of performance characteristics－Part 1：Measurement of volume rate of flow(pumping speed)

HU-MSZT

MSZ KGST 1855-1979 Air pressure gauges, vacuum pressure gauges, counting tables and proportional tables for vacuum gauges
MSZ KGST 2407-1980 Access specifications for cylindrical room pressure of air pressure gauges, vacuum pressure gauges, and vacuum gauges
MSZ KGST 3579-1982 Cutting specifications for air pressure gauges, vacuum pressure gauges, and vacuum gauges for corner room pressures

AENOR

UNE-EN 1251-2:2001 Cryogenic vessels. Transportable vacuum insulated vessels of not more than 1 000 litres volume. Part 2: Design, fabrication, inspection and testing.
UNE 28002-23:1965 AERONAUTICAL TERMINOLOGY. AEROSTATS. GENERALITIES. ALTITUDES, FORCES, HEIGHTS AND VOLUMES.
UNE-EN 13458-2:2003 Cryogenic vessels - Static vacuum insulated vessels - Part 2: Design, fabrication, inspection and testing.

Standard Association of Australia （SAA）

ISO 21029-1:2018/Amd.1:2019 Cryogenic vessels — Transportable vacuum insulated vessels of not more than 1 000 litres volume — Part 1: Design, fabrication, inspection and tests AMENDMENT 1

PL-PKN

PN H04185-1992 Refractory materials. Determination of bulk density, apparent porosity, true porosity and water absorbability
PN B02360-1969 Cuba?ure of buildingi Principles o( calcula?ion

CZ-CSN

CSN 72 6021-1980 Determination of bulk density and true porpsity. of insulating refractory pro- duots
CSN ISO 5016:1994 Shaped insulating refractory products.Determination of bulk density and true porosity

Association of German Mechanical Engineers

DVS 3201-2010 Fundamental principles for the designing of components for electron beam welding in fine and high vacuums

AT-ON

ONORM M 7460 Teil.3-1991 Positive displacement gas meters — Design of the adjusüng wheels, type B
ONORM M 7460 Teil.2-1991 Positive displacement gas meters; design of the adjusting wheels, type A

SE-SIS

SIS SS-ISO 1607-1:1991 Positive-displacement vacuum pumps — Measurement of performance characteris- tics — Part 1: Measurement of volume r?te of flow (pumping speed)

IET - Institution of Engineering and Technology

HF FILT DES COMP SIMUL-1994 HF Filter Design and Computer Simulation

RO-ASRO

STAS 3589/3-1978 INDICATING PRESSURE GAUGES, VACUUM GAUGES AND PRESSURE VACUUM COMBINED GAUGES WITH ELASTIC ELEMENT Dials and scales
STAS 3590-1964 Measuring tools. Commonly used pressure gauges, vacuum gauges and vacuum pressure gauges. Normal and operating pressure, scale

ES-UNE

UNE-EN 13458-2:2003/AC:2007 Cryogenic vessels - Static vacuum insulated vessels - Part 2: Design, fabrication, inspection and testing

Aerospace Industries Association/ANSI Aerospace Standards

AIA/NAS NAS 976-1975 Electron Beam Welding Machine - High Vacuum (Rev. 4)

Others: