Separation methods for structurally similar substances

Separation methods for structurally similar substances, Total:332 items.

The international standard classification for "Separation methods for structurally similar substances" includes: Materials for the reinforcement of composites in general , Textile fabrics , Reinforced plastics , Metallic coatings , Physics. Chemistry , Adhesives , Protection against crime .

The Chinese standard classification for "Separation methods for structurally similar substances" includes: Textile articles in general , Basic standards and general methods , Fibre reinforced composites , Material Protection , Special electronic technology material , Physics and Mechanics , Basic standards and general methods for adhesives , Crime judging technology .

Professional Standard - Textile

FZ/T 60039-2013 Coated fabrics for membrane structures—Test method for coating peeling strength
FZ/T 01093-1999 Textiles--Woven fabrics--Construction--Methods of analysis--Determination of linear density of yarn removed from fabric
FZ/T 60036-2013 Coated fabrics for membrane structures—Test method for joint force
FZ/T 01091-2008 Textiles―Woven fabrics―Construction―Methods of analysis―Determination of crimp of yarn in fabric
FZ/T 60038-2013 Coating fabrics for mebrane stuctures—Test method for anti-soil property
FZ/T 01090-1999 Textiles--Woven fabrics--Construction--Methods of analysis--Methods for the presentation of a weave diagram and plans for drafting denting and lifting
FZ/T 01093-2008 Textiles―Woven fabrics―Construction―Methods of analysis―Determination of linear density of yarn removed from fabric
FZ/T 01094-2008 Textiles―Woven fabrics―Construction―Methods of analysis―Determination of the mass of warp and weft per unit area of fabric
FZ/T 01090-2008 Textiles―Woven fabrics―Construction―Methods of analysis―Methods for the presentation of a weave diagram and plans for drafting denting and lifting
FZ/T 01092-2008 Textiles―Woven fabrics―Construction―Methods of analysis―Determination of twist in yarn removed from fabric
FZ/T 01091-1999 Textiles--Woven fabrics--Construction--Methods of analysis--Determination of crimp or take-up of yarn in fabric
FZ/T 01094-1999 Textiles--Woven fabrics--Construction--Methods of analysis--Determination of the mass of warp and weft per unit area of fabric
FZ/T 01092-1999 Textiles--Woven fabrics--Construction--Method of analysis--Determination of twist in yarn removed from fabric

Military Standard of the People's Republic of China-General Armament Department

GJB 130.8A-2021 Sandwich structure and core performance test methods Part 8: 90° peel test method for sandwich structures
GJB 130.8-1986 Test method for 90° peeling of glued aluminum honeycomb sandwich structures
GJB 130.7A-2021 Sandwich structure and core performance test methods Part 7: Sandwich structure roller peeling test method
GJB 130.7-1986 Test method for roller peeling of glued aluminum honeycomb sandwich structures

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 33523.6-2017/ISO 25178-6:2 Product Geometric Specification (GPS) Surface Structure Area Method Part 6: Classification of Surface Structure Measurement Methods
GB/T 29256.4-2012 Textiles—Woven fabrics—Construction—Methods of analysis—Part 4:Determination of twist in yarn removed from fabric
GB/T 5594.8-2015 Test methods for properties of structure ceramic used in electronic components and device―Part 8:Test method for microstructure
GB/T 29867-2013 Textiles—Knitted fabrics—Representation and pattern design
GB/T 29256.3-2012 Textiles—Woven fabrics—Construction—Methods of analysis—Part 3:Determination of crimp of yarn in fabric
GB/T 42106-2022 Nanotechnology—Fabrication of three dimensional nanostructures and devices—A strain method induced by ion beam irradiation
GB/T 33523.6-2017/ISO 25178-6-2 Product Geometric Specification (GPS) Surface Structure Area Method Part 6: Classification of Surface Structure Measurement Methods
GB/T 1457-2005 Test method for climbing drum peel strength of sanwich constructions
GB/T 29256.5-2012 Textiles—Woven fabrics—Construction—Methods of analysis—Part 5:Determination of linear density of yarn removed from fabric
GB/T 43602-2023 Composition|| structure and properties of PVD multi-layer hard coatings
GB/T 29256.1-2012 Textiles—Woven fabrics—Construction—Methods of analysis—Part 1:Methods for the presentation of a weave diagram and plans for drafting,denting and lifting
GB/T 1457-1988 Test method for climbing drum peel of sandwich constructions

未注明发布机构

DIN EN 302-2:2004 Adhesives for load-bearing timber structures - Test methods - Part 2: Determination of resistance to delamination
DIN EN 302-2 E:2015-09 Adhesives for load-bearing timber structures - Test methods - Part 2: Determination of resistance to delamination
DIN EN 302-2 E:2001-06 Adhesives for load-bearing timber structures - Test methods - Part 2: Determination of resistance to delamination
DIN EN 594 E:2008-12 Timber structures - Test methods - Racking strength and stiffness of timber frame wall panels
DIN EN 594 E:2010-03 Timber structures - Test methods - Racking strength and stiffness of timber frame wall panels
DIN EN 302-2 E:2011-06 Adhesives for load-bearing timber structures - Test methods - Part 2: Determination of resistance to delamination
ASTM RR-D01-1085 1995 D5910-Test Method for Determination of Free Formaldehyde in Emulsion Polymers by Liquid Chromatography
DIN EN 302-2 E:2021-10 Adhesives for load-bearing timber structures - Test methods - Part 2: Determination of resistance to delamination
DIN EN 302-2:1992 Adhesives for load-bearing timber structures - Test methods - Part 2: Determination of resistance to delamination

Professional Standard - Electron

SJ 20756-1999 Guideline for application of structrually similarity of discrete semiconductor devices

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 1457-2022 Test method for climbing drum peel strength of sandwich constructions
GB/T 36877-2018 Determination of impact peel strength of structural adhesives - Wedge method

国家能源局

SY/T 7055-2016 Recommended practices for underwater separator structural design
SY/T 7410.2-2020 3D pore structure characterization of rocks-Part 2: FIB-SEM method

Professional Standard - Nuclear Industry

EJ/T 1150-2001 The method for determinating free components of sintered gadolinium oxide-uranium dioxide pellets Color ceramographic method
EJ/T 688-1992 Microstructure examination method of sintered uranium dioxide pellets ceramic metallographic method

Professional Standard - Machinery

JB/T 5195-1991 Measurement method of technical specification for interchangeable structural member of camera

Professional Standard - Public Safety Standards

GA/T 930-2011 GC and chemistry examination methods for cyanogens ion in biology samples

Group Standards of the People's Republic of China

T/CSCP 0035.18-2017 Laboratory Corrosion Tests on Low Alloy Structural Steels Part 18: Methods for Removal of Corrosion Products on Low Alloy Structural Steels
T/CALAS 84-2020 Laboratory animal-Detection method of swine maternal genetic structure
T/CEEIA 437-2020 Standard Test Methods for Compatibility of Natural Ester Type Insulating Oil with Construction Material
T/CSBM 0049-2024 Porous structure characteristics testing method for calcium phosphate bioceramics
T/CSCP 0035.17-2017 Laboratory Corrosion Tests on Low Alloy Structural Steels Part 17: Analytical Methods for Corrosion Products of Low Alloy Structural Steels
T/SDAS 761-2023 Determination method of aromatic ring structure of biomass-based carbon materials

Sichuan Provincial Standard of the People's Republic of China

DB51/T 2296-2016 Isolation and identification method of Corynebacterium pseudotuberculosis

Shandong Provincial Standard of the People's Republic of China

DB37/T 346-2003 Plant nematode shallow tray isolation method

Professional Standard - Ocean

HY/T 229-2018 Structure confirmation method of marine bioactive material of certified reference material

Professional Standard - Military and Civilian Products

WJ 2538-1999 Determination of Structure and Content of Explosives and Their Related Substances by NMR Spectroscopy

Professional Standard - Rare Earth

XB/T 619-2015 Chemical analysis methods of ion type rare earth ore. Determination of total rare earth ion phase

工业和信息化部

YD/T 4030-2022 Test specification for distributed storage based on big data separation architecture

Jiangxi Provincial Standard of the People's Republic of China

DB36/T 689-2012 Chemical analysis method of ionic rare earth raw ore Determination of total amount of rare earth in ionic phase EDTA titration method

SCC

BS 2861 TO 2866:1972 Methods for analysis of woven fabric construction
BS 2861 TO 2866:1957 Methods for analysis of woven fabric construction
BS EN 2243-2:1991 Structural adhesives. Test methods-Peel metal-metal
CAN/CGSB 148.1 No.7.3-1992 Test methods for geotextiles and geomembranes - Tensile strength test of geotextiles - Pull-off test
NS-EN 1195:1997 Timber structures — Test methods — Performance of structural floor decking
AENOR UNE-EN 1195:1998 TIMBER STRUCTURES. TEST METHODS. PERFORMANCE OF STRUCTURAL FLOOR DECKING.
AS A30:1958 Methods for fire tests on building materials and structures
AWWA MTC50233 A Novel Approach Involving Uranyl Ion Binding for Determination of Polymer Membrane Surface Charge in Water Separation Membranes
BS EN 2243-3:1992 Structural adhesives. Test methods.-Peeling test metal-honeycomb core
AS/NZS 2269.1:2008 Plywood - Structural, Part 1: Determination of structural properties - Test methods
AWWA MTC50234 The Effect of Surfactants on the Microscale Architecture of Biofilms Formed on Polymer Separation Membranes
CAN/CGSB 4.2 No.8.1-M89/ISO 7211/4:1984 Methods for textile tests - Textiles - Fabrics - Construction - Methods of analysis - Part 4: Determination of the twist of a yarn taken from a fabric
DANSK DS/EN ISO 4499-3:2016 Hardmetals - Metallographic determination of microstructure - Part 3: Measurement of microstructural features in Ti (C, N) and WC/cubic carbide based hardmetals
DANSK DS/ISO 7211-3:2022 Textiles – Woven fabrics – Construction – Methods of analysis – Part 3: Determination of crimp of yarn in fabric
SN-CEN/TS 1993-1-101:2022 Eurocode 3: Design of steel structures - Part 1-101: Alternative interaction method for members in bending and compression
NS-EN 2243-2:1991 Areospace series — Structural adhesives — Test methods — Part 2: Peel metal-metal
IEC 61189-3:1997+AMD1:1999 CSV Test methods for electrical materials, interconnection structures and assemblies - Part 3: Test methods for interconnection structures (printed boards)
DANSK DS/CEN/TS 1993-1-101:2022 Eurocode 3: Design of steel structures – Part 1-101: Alternative interaction method for members in bending and compression
UNE-EN 15619:2009+A1:2010 Rubber or plastic coated fabrics - Safety of temporary structures (tents) - Specification for coated fabrics intended for tents and related structures
DANSK DS/EN 15619:2014 Rubber or plastic coated fabrics - Safety of temporary structures (tents) - Specification for coated fabrics intended for tents and related structures
NS-EN 15619:2014 Rubber or plastic coated fabrics — Safety of temporary structures (tents) — Specification for coated fabrics intended for tents and related structures
UNE-EN 15619:2009 Rubber or plastic coated fabrics - Safety of temporary structures (tents) - Specification for coated fabrics intended for tents and related structures
NS-EN 15619:2008 Rubber or plastic coated fabrics - Safety of temporary structures (tents) - Specification for coated fabrics intended for tents and related structures
AS 1530.4:1985 Methods for fire tests on building materials, components and structures, Part 4: Fire-resistance tests of elements of building construction
AENOR UNE-EN 15619:2014 Rubber or plastic coated fabrics - Safety of temporary structures (tents) - Specification for coated fabrics intended for tents and related structures
NS-EN 12572-3:2008 Artificial climbing structures — Part 3: Safety requirements and test methods for climbing holds
NS-EN 12572-3:2017 Artificial climbing structures — Part 3: Safety requirements and test methods for climbing holds
DANSK DS/EN 12572-3:2017 Artificial climbing structures – Part 3: Safety requirements and test methods for climbing holds
DANSK DS/ISO 22157:2019 Bamboo structures – Determination of physical and mechanical properties of bamboo culms – Test methods
UNE-EN 12572-3:2009 Artificial climbing structures - Part 3: Safety requirements and test methods for climbing holds
NS-EN ISO 4499-3:2016 Hardmetals — Metallographic determination of microstructure — Part 3: Measurement of microstructural features in Ti (C, N) and WC/cubic carbide based hardmetals (ISO 4499-3:2016)
VDI 2038 BLATT 1-2012 Serviceability of structures subjected to dynamic loads — Investigation methods and assessment procedures for structural dynamics — Basics — Methods, procedures and loads
DIN EN 15619 E:2012 Draft Document - Rubber or plastics coated fabrics - Safety of temporary structures (tents) - Specification for coated fabrics intended for tents and related structures; German version prEN 15619:2012
DANSK DS/ISO 7211-4:2022 Textiles – Woven fabrics – Construction – Methods of analysis – Part 4: Determination of twist in yarn removed from fabric

Korean Agency for Technology and Standards (KATS)

KS I 9246-2021 Determination of bisphenol A and its structural analogues in paper products — High performance liquid chromatography
KS F 2256-2014 Method of test for noncombustible structural parts of buildings
KS F 2258-2009 Method of fire test for wooden structural parts of buildings
KS F 2257-2000 METHOD OF FIRE RESISTANCE TEST FOR STRUCTURAL PARTS OF BUILDINGS
KS K ISO 13426-2-2007(2017) Geotextiles and geotextile-related products－Strength of internal structural junctions－Part 2：Geocomposites
KS F 2258-2014 Method of fire test for wooden structural parts of buildings
KS F 2258-1995 Method of fire test for wooden structural parts of buildings
KS K ISO 7211-3:2015 Textiles — Woven fabrics — Construction — Methods of analysis — Part 3: Determination of crimp of yarn in fabric
KS K ISO 7211-3:2008 Testiles-Woven fabrics-Construction-Methods of analysis-Part 3:Determination of crimp of yarn in fabric
KS K ISO 13426-1-2012(2017) Geotextiles and geotextile-related products－Strength of internal structural junctions－Part 1：Geocells
KS K ISO 7211-4:2021 Textiles — Woven fabrics — Construction — Methods of analysis — Part 4: Determination of twist in yarn removed from fabric
KS K ISO 7211-3:2021 Textiles — Woven fabrics — Construction — Methods of analysis —Part 3: Determination of crimp of yarn in fabric
KS B ISO 6178-2007(2012) Centrifuges－Construction and safety rules－Method for the calculation of the tangential stress in the shell of a cylindrical centrifuge rotor
KS F 2256-1995 Method of fire test for noncombustible structural parts of buildings
KS V ISO 15748-2-2023 Potable water supply on ships and marine structures–Part 2: Method of calculation
KS K ISO 7211-1:2009 Textiles－Woven fabrics－Construction－Methods of analysis－Part 1：Methods for the presentation of a weave diagram and plans for drafting, denting and lifting
KS F 2101-2013(2018) Standard test method for settlement of structures
KS K ISO 7211-1:2018 Textiles — Woven fabrics — Construction — Methods of analysis — Part 1: Methods for the presentation of a weave diagram and plans for drafting, denting and lifting
KS D 0210-1992(2022) MacroStructure Detecting Method for Steel
KS K ISO 7211-2:2017 Textiles－Woven fabrics－Construction－Methods of analysis－Part 2：Determination of number of threads per unit length
KS K ISO 7211-2:2022 Textiles — Woven fabrics — Construction — Methods of analysis — Part 2: Determination of number of threads per unit length
KS K 0415-2022 Textiles — Methods for analysis of woven fabrics construction — Part 5: Determination of linear density of yarn removed from fabric
KS V ISO 15748-2-2013(2018) Potable water supply on ships and marine structures–Part 2: Method of calculation

GSO

GSO ISO 12580:2014 Timber structures -- Glued laminated timber -- Methods of test for glue-line delamination
GSO EN 15619:2010 Rubber or plastic coated fabrics - Safety of temporary Structures (tents) - Specification for coated fabrics intended for tents and related structures
OS GSO ISO 13910:2014 Timber structures -- Strength graded timber -- Test methods for structural properties
GSO ISO 7211-3:2010 Textiles -- Woven fabrics -- Construction -- Methods of analysis -- Part 3: Determination of crimp of yarn in fabric
GSO ISO 7404-3:2013 Methods for the petrographic analysis of coals - Part 3: Method of determining maceral group composition
OS GSO ISO 7211-3:2010 Textiles -- Woven fabrics -- Construction -- Methods of analysis -- Part 3: Determination of crimp of yarn in fabric
GSO ISO 13910:2014 Timber structures -- Strength graded timber -- Test methods for structural properties
GSO ISO 4499-3:2021 Hardmetals — Metallographic determination of microstructure — Part 3: Measurement of microstructural features in Ti (C, N) and WC/cubic carbide based hardmetals
BH GSO ISO 4499-3:2022 Hardmetals — Metallographic determination of microstructure — Part 3: Measurement of microstructural features in Ti (C, N) and WC/cubic carbide based hardmetals
BH GSO EN 15619:2011 Rubber or plastic coated fabrics - Safety of temporary Structures (tents) - Specification for coated fabrics intended for tents and related structures
OS GSO ISO 7211-4:2010 Textiles -- Woven fabrics -- Construction -- Methods of analysis -- Part 4: Determination of twist in yarn removed from fabric
OS GSO EN 15619:2010 Rubber or plastic coated fabrics - Safety of temporary Structures (tents) - Specification for coated fabrics intended for tents and related structures
GSO EN 12572-3:2022 Artificial climbing structures -- Part 3: Safety requirements and test methods for climbing holds
BH GSO EN 12572-3:2023 Artificial climbing structures -- Part 3: Safety requirements and test methods for climbing holds
OS GSO ISO 13884:2014 Animal and vegetable fats and oils -- Determination of isolated trans isomers by infrared spectrometry
OS GSO ISO 7211-5:2010 Textiles -- Woven fabrics -- Construction -- Methods of analysis -- Part 5: Determination of linear density of yarn removed from fabric

RU-GOST R

GOST R 54851-2011 Building envelope insimilar. Calculation reduced total thermal resistances
GOST 25891-1983 Buildings and structures. Methods of determination of airtightness of enclosing structures
GOST 19308-1973 Centrifugal moulds with flange and centrifugal locks. Construction and dimensions
GOST 19308-1998 Centrifugal moulds with flange and centrifugal locks. Construction and dimensions
GOST 18622-1979 Interaction of ionizing radiations with matter. Chemical composition tissue eguivalent matter
GOST 19309-1973 Centrifugal moulds with flange, inserts and centrifugal locks. Construction and dimensions
GOST 25380-1982 Buildings and structures. Method of measuring density of heat flows passing through englosure structures
GOST R 54944-2012 Buildings and structures. Methods for measuring the illuminance
GOST 19309-1998 Centrifugal moulds with flange, inserts and centrifugal locks. Construction and dimensions
GOST 26824-2010 Buildings and Structures. Methods for measuring the luminance
GOST 9414.3-1993 Methods for the petrographic analysis of bituminous coal and anthracite. Part 3. Method of determining maceral group composition
GOST 6433.6-1984 Electrical insulating materials. Methods for determination of ionic foreign matters by extraction
GOST 31167-2003 Buildings and structures. Methods for determination of air permeability of building envelope in field conditions
GOST 26253-2014 Buildings and constructions. Method for determining the building structure ability to maintain a relatively constant temperature of its inside surface under cycling thermal influence
GOST 31734-2012 Fuel oils. Method for determination of water and sediment by centrifugation method
GOST 19307-1973 Centrifugal moulds with flange and latch locks. Construction and dimensions
GOST R 54945-2012 Buildings and structures. Methods for measuring of illuminance pulsation factor
GOST 31167-2009 Buildings and structures. Methods for determination of air permeability of building envelopes in field conditions
GOST 10313-1987 Still picture camera. Accessory shoes and accessory feet. Design
GOST R 56733-2015 Buildings and constructions. Method for determination of the specific heat losses through inhomogeneity of the enclosing structure
GOST R 51973-2002 Cigarettes. Determination of water content in smoke condensate. Gas-chromatographic method
GOST 12579-2013 Sugar. Method of granulometric structure determination
GOST R 56684-2015 Polymer composites. Method for determination of sandwich constructions` damage resistances
GOST 33080-2014 Timber structures. Strength classes of structural sawn timber and methods of its determination

Association Francaise de Normalisation

NF P21-382:1996 Timber structures. Test methods. Racking strength and stiffness of timber frame wall panels.
NF EN 12810-2:2004 Facade scaffolding with prefabricated components - Part 2: specific structural calculation methods
NF ISO 7211-3:2017 Textiles - Fabrics - Construction - Methods of analysis - Part 3: determination of the haze of a thread in a fabric
NF EN 443:2008 Helmets for fighting fires in buildings and other structures
NF G37-141*NF EN 15619:2014 Rubber or plastic coated fabrics - Safety of temporary structures (tents) - Specification for coated fabrics intended for tents and related structures
NF T76-152-2:2013 Adhesives for load-bearing timber structures - Test methods - Part 2: determination of resistance to delamination
NF X42-200:1987 BIOTECHNOLOGY. SEPARATION METHODS. CLASSIFICATION.
NF ISO 7211-5:2020 Textiles - Fabric construction analysis methods - Part 5: determination of the linear density of a yarn taken from a fabric
NF G07-154-3*NF ISO 7211-3:2017 Textiles- Woven fabrics- Construction- Methods of analysis- Part 3 : determination of crimp of yarn in fabric
NF P21-383*NF EN 1195:1998 Timber structures. Test methods. Performance of structural floor decking.
NF T60-254:1997 Animal and vegetable fats and oils. Determination of the composition of the sterol fraction. Method by gas chromatography with isolation of total sterols by HPLC.
NF X45-200:1995 Ions separation in liquid phase. Polymeric ion exchange membranes. Characterisation and test methods of homopolar membranes.
NF U47-104:2014 Animal health analysis methods - Identification and isolation of mycobacteria of the Mycobacterium tuberculosis complex in mammals
NF P21-382*NF EN 594:2011 Timber structures - Test methods - Racking strength and stiffness of timber frame wall panels.
NF X42-201:1987 BIOTECHNOLOGY. SEPARATION METHODS. DEFINITIONS.
NF T76-142*NF T 76-142:2021 Structural adhesives - Preparation method of structural adhesive plates for characterization test pieces
NF L17-300-2:1991 Aerospace series. Structural adhesives. Test methods. Part 2 : peel metal-metal.
NF EN 12701:2001 Structural adhesives - Storage - Definition of terms and expressions relating to the life of structural adhesives and related materials
NF U47-104:2003 Animal health analysis methods - Isolation and identification of mycobacteria other than mycobacterium avium subsp. paratuberculosis in animals.
NF A95-186-3*NF EN ISO 4499-3:2016 Hardmetals - Metallographic determination of microstructure - Part 3 : measurement of microstructural features in Ti (C, N) and WC/cubic carbide based hardmetals
NF C93-732:2000 Test methods for electrical materials, interconnection structures and assemblies - Part 2 : Test method for materials for interconnection structures.
NF EN IEC 61189-2-630:2018 Méthodes d'essai pour les matériaux électriques, les cartes imprimées et autres structures d'interconnexion et ensembles - Partie 2-630 : méthodes d'essai des matériaux pour structures d'interconnexion - Absorption d'humidité après conditi...
NF EN 12572-3:2017 Artificial climbing structures - Part 3: safety requirements and test methods for climbing holds
NF EN 61189-2-721:2015 Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 2-721: methods of testing materials for interconnection structures - Measurement of relative permittivity and...
NF EN 1049-2:1994 Textiles - Fabrics - Construction - Methods of analysis - Part 2: determination of the number of threads per unit length
NF G07-154:1984 Textiles. Woven fabrics. Construction. Methods of analysis. Methods for the presentation of a weave diagram and plans for drafting, denting and lifting.
NF X31-506:1992 Soil quality - Physical methods - Assessment of the structural stability of a soil
NF T76-149*NF EN 15190:2007 Structural adhesives - Test methods for assessing long term durability of bonded metallic structures
NF EN 61189-2-719:2016 Test method for electrical materials, printed boards and other interconnection structures and assemblies - Part 2-719: methods of testing materials for interconnection structures - Relative and tangent permittivity of p...
NF G07-157:1984 Textiles. Woven fabrics. Construction. Methods of analysis. Determination of the mass of warp and weft per unit area of fabric.

ES-UNE

UNE 135127-1:2021 Road restraint systems. Methods of measurement for loads transmitted by vehicle parapets to structures. Part 1: vehicle parapets with discrete interaction with the structure.
UNE-EN ISO 4499-3:2016 Hardmetals - Metallographic determination of microstructure - Part 3: Measurement of microstructural features in Ti (C, N) and WC/cubic carbide based hardmetals (ISO 4499-3:2016)

Japanese Industrial Standards Committee (JISC)

JIS L 1021:1999 Testing methods for construction of textile floor coverings
JIS A 1301:1994 Method of fire test for wooden structural parts of buildings
JIS A 1304:1994 Method of fire resistance test for structural parts of buildings
JIS A 1453:1973 Method of abrasion test for building materials and part of building construction (abrasive-paper method)
JIS A 1452:2015 Methods of abrasion test for building materials and part of building construction (Falling sand method)
JIS A 1452:1972 Method of abrasion test for building materials and part of building construction (falling sand method)
JIS A 1453:2015 Methods of abrasion test for building materials and part of building construction (Abrasive-paper method)
JIS A 1414 AMD 1:2007 Methods of performance test of panels for building construction (Amendment 1)
JIS A 1304 AMD 1:2011 Method of fire resistance test for structural parts of buildings (Amendment 1)
JIS A 1302:1994 Method of fire test for noncombustible structural parts of buildings
JIS G 0553:1996 Macrostructure detecting method for steel

British Standards Institution (BSI)

BS ISO 7404-3:2009 Methods for the petrographic analysis of coals - Method of determining maceral group composition
BS 3712-4:1991 Building and construction sealants - Method of test for adhesion in peel
BS ISO 7211-3:2002 Textiles - Woven fabrics - Construction - Methods of analysis - Determination of crimp of yarn in fabric
BS EN 15619:2014 Rubber or plastic coated fabrics. Safety of temporary structures (tents). Specification for coated fabrics intended for tents and related structures
BS EN 302-2:2017 Adhesives for load-bearing timber structures. Test methods. Determination of resistance to delamination
BS EN 302-2:2004 Adhesives for load-bearing timber structures - Test methods - Determination of resistance to delamination
BS EN 302-2:2013 Adhesives for load-bearing timber structures. Test methods. Determination of resistance to delamination
BS ISO 7211-4:2002 Textiles - Woven fabrics - Construction - Methods of analysis - Determination of twist in yarn removed from fabric
BS 4223:1989 Methods for determination of constructional details of textile floor coverings with yarn pile
BS 3900-F11:1985(2008) [ Cathodic disbonding (land - based)] Methods of test for paints Part F11 : Determination of resistance to cathodic disbonding of coatings for use on land - based buried structures
BS ISO 7211-5:2020 Textiles. Methods for analysis of woven fabrics construction - Determination of linear density of yarn removed from fabric
BS ISO 22157:2019 Bamboo structures. Determination of physical and mechanical properties of bamboo culms. Test methods
BS EN 1382:1999 Timber structures - Test methods - Withdrawal capacity of timber fasteners
12/30237063 DC BS ISO 13910. Timber structures. Strength graded timber. Test methods for structural properties
BS ISO 7211-5:2002 Textiles - Woven fabrics - Construction - Methods of analysis - Determination of linear density of yarn removed from fabric
BS EN 1383:1999 Timber structures - Test methods - Pull-through resistance of timber fasteners
BS EN ISO 13884:2005(2006) Animal and vegetable fats and oils — Determination of isolated trans isomers by infrared spectrometry
BS EN 15190:2007 Structural adhesives - Test methods for assessing long term durability of bonded metallic structures

American Society for Testing and Materials (ASTM)

ASTM D1910-64(1975)e1 Methods of Test for Construction Characteristics of Woven Fabrics
ASTM D6422-99 Standard Test Method for Water Tolerance (Phase Separation) of Gasoline-Alcohol Blends
ASTM B657-11 Guide for Metallographic Identification of Microstructure in Cemented Carbides
ASTM D3775-98 Standard Test Method for Fabric Count of Woven Fabric
ASTM C271/C271M-05 Standard Test Method for Density of Sandwich Core Materials
ASTM C271/C271M-11 Standard Test Method for Density of Sandwich Core Materials
ASTM F2877-11 Standard Test Method for Shock Testing of Structural Insulation of a Class Divisions Constructed of Steel or Aluminum
ASTM UOP832-83 Carbon Structure of C9 and Lower Boiling Hydrocarbons by Gas Chromatography
ASTM F2877/F2877M-13e1 Standard Test Method for Shock Testing of Structural Insulation of A-Class Divisions Constructed of Steel or Aluminum
ASTM D5910-05 Standard Test Method for Determination of Free Formaldehyde in Emulsion Polymers by Liquid Chromatography
ASTM D5910-05(2019) Standard Test Method for Determination of Free Formaldehyde in Emulsion Polymers by Liquid Chromatography
ASTM C271-99 Standard Test Method for Density of Sandwich Core Materials
ASTM F2877-11e1 Standard Test Method for Shock Testing of Structural Insulation of A-Class Divisions Constructed of Steel or Aluminum
ASTM D5910-96 Standard Test Method for Determination of Free Formaldehyde in Emulsion Polymers by Liquid Chromatography

IN-BIS

IS 11959-1987 Metallographic determination method of cemented carbide microstructure
IS 9307 Pt.1-1979 Test methods for sandwich structures of wood-based structures Part Ⅰ Bending test
IS 9307 Pt.3-1979 Test methods for sandwich structures of wood-based structures Part Ⅰ Bending test

ES-AENOR

UNE 11-016-1989 Wardrobes and similar furniture. Test methods for determining structural resistance

CU-NC

NC 05-07-1986 Metallography. Microstructure of Hard Alloy Metals. Testing Method

International Organization for Standardization (ISO)

ISO 12580:2007 Timber structures - Glued laminated timber - Methods of test for glue-line delamination
ISO 7404-4:2017 Methods for the petrographic analysis of coals — Part 4: Method of determining microlithotype, carbominerite and minerite composition
ISO 7404-3:2009 Methods for the petrographic analysis of coals - Part 3: Method of determining maceral group composition
ISO 13910:2014 Timber structures - Strength graded timber - Test methods for structural properties
ISO 7404-3:1984 Methods for the petrographic analysis of bituminous coal and anthracite; Part 3 : Method of determining maceral group composition
ISO 7211-3:1984 Textiles; Woven fabrics; Construction; Methods of analysis; Part 3 : Determination of crimp of yarn in fabric
ISO 16572:2008 Timber structures - Wood-based panels - Test methods for structural properties
ISO 7211-5:2020 Textiles — Methods for analysis of woven fabrics construction — Part 5: Determination of linear density of yarn removed from fabric
ISO 22157:2019 Bamboo structures — Determination of physical and mechanical properties of bamboo culms — Test methods
ISO 7404-3:1994 Methods for the petrographic analysis of bituminous coal and anthracite - Part 3: Method of determining maceral group composition
ISO 7211-1:1984 Textiles; Woven fabrics; Construction; Methods of analysis; Part 1 : Methods for the presentation of a weave diagram and plans for drafting, denting and lifting
ISO 7211-4:1984 Textiles; Woven fabrics; Construction; Methods of analysis; Part 4 : Determination of twist in yarn removed from fabric
ISO 7211-5:1984 Textiles; Woven fabrics; Construction; Methods of analysis; Part 5 : Determination of linear density of yarn removed from fabric
ISO 7211-6:2020 Textiles — Methods for analysis of woven fabrics construction — Part 6: Determination of the mass of warp and weft per unit area of fabric

German Institute for Standardization

DIN EN 594:2011 Timber structures - Test methods - Racking strength and stiffness of timber frame wall panels; German version EN 594:2011
DIN EN 596:1996 Timber structures - Test methods - Soft body impact test of timber framed walls; German version EN 596:1995
DIN 53174-2:1992 Solvents for paints, varnishes and similar coating materials; methods of analysis for solvent mixtures; gas chromatographic method
DIN EN ISO 4499-3:2016-10 Hardmetals - Metallographic determination of microstructure - Part 3: Measurement of microstructural features in Ti (C, N) and WC/cubic carbide based hardmetals (ISO 4499-3:2016); German version EN ISO 4499-3:2016
DIN 4109 Bb.1:1989 Sound insulation in buildings; construction examples and calculation methods
DIN EN 15619:2014-07 Rubber or plastic coated fabrics - Safety of temporary structures (tents) - Specification for coated fabrics intended for tents and related structures; German version EN 15619:2014
DIN EN 12572-3:2017-05 Artificial climbing structures - Part 3: Safety requirements and test methods for climbing holds; German version EN 12572-3:2017 / Note: DIN EN 12572-3 (2009-01) remains valid alongside this standard until 2017-07-31.

Danish Standards Foundation

DS/EN 302-2:1994 Adhesives for load-bearing timber structures. Test methods. Part 2: Determination of resistance to delamination (Laboratory method)
DS/EN 2243-3:1993 Aerospace series. Structural adhesives. Test methods. Part 3: Peeling test metal-honeycomb core
DS/EN 1195:1998 Timber structures - Test methods - Performance of structural floor decking
DS/EN 15619+A1:2010 Rubber or plastic coated fabrics - Safety of temporary structures (tents) - Specification for coated fabrics intended for tents and related structures
DS/EN 596:1996 Timber structures - Test methods - Soft body impact test of timber framed walls

KR-KS

KS K ISO 7211-3-2015 Textiles — Woven fabrics — Construction — Methods of analysis — Part 3: Determination of crimp of yarn in fabric
KS K ISO 7211-4-2021 Textiles — Woven fabrics — Construction — Methods of analysis — Part 4: Determination of twist in yarn removed from fabric
KS K ISO 7211-3-2021 Textiles — Woven fabrics — Construction — Methods of analysis —Part 3: Determination of crimp of yarn in fabric
KS K ISO 7211-1-2018 Textiles — Woven fabrics — Construction — Methods of analysis — Part 1: Methods for the presentation of a weave diagram and plans for drafting, denting and lifting
KS K ISO 7211-2-2022 Textiles — Woven fabrics — Construction — Methods of analysis — Part 2: Determination of number of threads per unit length
KS K ISO 7211-2-2017 Textiles－Woven fabrics－Construction－Methods of analysis－Part 2：Determination of number of threads per unit length

HU-MSZT

MSZ KGST 1352-1978 Relativity test method for external main structure of television picture tube
MSZ 5954/1-1979 Analyze solutions for similar pollution measures

VN-TCVN

TCVN 5093-1990 Textiles.Woven fabrics construction.Methods of analysis determination of crimp of yarn in fabrics
TCVN 5094-1990 Textiles.Woven fabrics construction.Methods of analysis determination of twist in yarn removed from fabrics
TCVN 5095-1990 Textiles.Woven fabrics construction.Method of analysis determination of linear density of yarn removed from fabrics
TCVN 5096-1990 Textiles.Woven fabrics construction.Method of analysis determination of the mass of warp and weft per unit area of fabrics

AENOR

UNE-EN 1195:1998 TIMBER STRUCTURES. TEST METHODS. PERFORMANCE OF STRUCTURAL FLOOR DECKING.
UNE-EN 15619:2014 Rubber or plastic coated fabrics - Safety of temporary structures (tents) - Specification for coated fabrics intended for tents and related structures
UNE-EN 596:1996 Timber structures - Test methods - Soft body impact test of timber framed walls

GOSTR

GOST 26824-2018 Buildings and structures. Methods for mеаsuring the luminance
GOST R 56733-2020 Buildings and constructions. Determination of the specific heat losses through inhomogeneity of the enclosing structure

American Society of Mechanical Engineers (ASME)

ASME A112.6.2-2000 Framing-Affixed Supports for Off-the-Floor Water Closets with Concealed Tanks
ASME MH1.1.2-1996 Definitions and terminology covering pallets and related structures
ASME A112.6.2-2001 Framing-Affixed Supports For The Off-The-Floor Water Closets With Concealed Tanks.

Lithuanian Standards Office

LST EN 1195-2000 Timber structures - Test methods - Performance of structural floor decking
LST EN 15619-2008+A1-2010 Rubber or plastic coated fabrics - Safety of temporary structures (tents) - Specification for coated fabrics intended for tents and related structures
LST EN 596-2000 Timber structures - Test methods - Soft body impact test of timber framed walls

European Committee for Standardization (CEN)

EN 302-2:1992 Adhesives for load-bearing timber structures; test methods; part 2: determination of resistance to delamination (laboratory method)
EN 302-2:2013 Adhesives for load-bearing timber structures - Test methods - Part 2: Determination of resistance to delamination
EN 302-2:2017 Adhesives for load-bearing timber structures - Test methods - Part 2: Determination of resistance to delamination
82/434/EEC on the approximation of the laws of the Member States relating to methods of analysis necessary for checking the composition of cosmetic products
EN 1195:1997 Timber structures - Test methods - Performance of structural floor decking
CWA 17253-1:2018 Joint implants - Part 1: Novel methods for isolating wear particles from joint replacements and related devices
EN 13381-8:2010 Test methods for determining the contribution to the fire resistance of structural members - Part 8: Applied reactive protection to steel members
CEN/TS 1993-1-101:2022 Eurocode 3: Design of steel structures - Part 1-101: Alternative interaction method for members in bending and compression
EN 13381-8:2013 Test methods for determining the contribution to the fire resistance of structural members - Part 8: Applied reactive protection to steel members
CWA 18083:2024 Methodology for the construction of omics-related knowledge graphs from animal, vegetal and environmental data
EN 14251:2003 Structural round timber - Test methods
EN 15190:2007 Structural adhesives - Test methods for assessing long term durability of bonded metallic structures

CEN - European Committee for Standardization

EN 302-2:2004 Adhesives for load-bearing timber structures - Test methods - Part 2: Determination of resistance to delamination

PL-PKN

PN C89060-1959 plastic. Approximate method for determination of free ammonia and ammonium phenolic compounds content in products

Indonesia Standards

SNI ISO 7211-3:2010 Textiles - Woven fabrics - Construction - Methods of analysis - Part 3: Determination of crimp of yarn in fabric
SNI 0458-2013 Test methods for weft yarn structure of textile knitted fabrics
SNI 03-6894-2002 Test method for asphalt content from asphalt mixtures by centrifuge
SNI ISO 7211-4:2011 Textiles - Woven fabrics - Construction - Methods of analysis - Part 4: Determination of twist in yarn removed from fabric

Standard Association of Australia （SAA）

AS/NZS 2269.1:2012 Test method for determination of structural properties of plywood structures
AS/NZS 2269.2:2007 Plywood - Structural - Determination of structural properties - Evaluation methods

Natural Gas Processor's Association (NGPA)

GPA STD 2286-2014 Method for the Extended Analysis of Natural Gas and Similar Gaseous Mixtures by Temperature Program Gas Chromatography

ZA-SANS

SANS 7211-5:1984 Textiles - Woven fabrics - Construction - Methods of analysis Part 5: Determination of linear density of yarn removed from fabric
SANS 745-3:2008 Structural laminated veneer lumber Part 3: Determination of structural properties - Evaluation methods
SANS 745-2:2008 Structural laminated veneer lumber Part 2: Determination of structural properties - Test methods

NL-NEN

NEN-EN 302-2-1993 Adhesives for load-bearing timber stuctures. Test methods. Part 2: Determination of resistance to delamination (Laboratory method)

GOST

GOST 32486-2021 Fiber-reinforced polymer bar for concrete reinforcement. Methods for determination of structural characteristics

Society of Automotive Engineers (SAE)

SAE ARP1611A-1995 Quality Inspection Procedure, Composites Tracer Fluoroscopy and Radiography

Canadian General Standards Board （CGSB)

CAN/CGSB-4.2 NO.39-2004 Textile Test Methods Textiles - Woven Fabrics - Construction - Methods of Analysis - Part 3: Determination of Crimp of Yarn in Fabric
CAN/CGSB-4.2 NO.8.1-M89-1989 Textile Test Methods Textiles - Woven Fabrics - Construction - Methods of Analysis - Part 4: Determination of Twist in Yarn Removed from Fabric

ESDU - Engineering Sciences Data Unit

ESDU 97033-1997 Methods for analysis of the dynamic response of structures.

American National Standards Institute （ANSI)

ANSI/ASTM F2877:2013 Test Method foroShock Testing of Structural Insulation of A-Class Divisions Constructed of Steel or Aluminum

CZ-CSN

CSN 73 0549-1977 Thermo-teehníeal properties of engineer- ing structures and buildings. Methods of caloulation.

International Electrotechnical Commission (IEC)

IEC 61189-2/COR1:1997 Test methods for electrical materials, interconnection structures and assemblies - Part 2: Test methods for materials for interconnection structures
IEC 61189-2:2006 Test methods for electrical materials, interconnection structures and assemblies - Part 2: Test methods for materials for interconnection structures
IEC 61189-2:1997 Test methods for electrical materials, interconnection structures and assemblies - Part 2: Test methods for materials for interconnection structures
IEC 61189-3:1997 Test methods for electrical materials, interconnection structures and assemblies - Part 3: Test methods for interconnection structures (printed boards)

American Society of Civil Engineers (ASCE)

ASCE 4-2000 Seismic Analysis of Safety-Related Nuclear Structures and Commentary

SE-SIS

SIS SS-EN 2243-2-1992 Aerospace series — Structural adhesives — Test methods — Part 2: Peel metal-metal
SIS SS-EN 2243-3-1992 Aerospace series — Structural adhesives — Test methods — Part 3: Peeling test metal-honeycomb core

European Association of Aerospace Industries

AECMA PREN 2243-2-2001 Aerospace Series Non-Metallic Materials Structural Adhesives Test Method Part 2: Peel Metal-Metal Edition P 1

GM North America

GM 9981781-1977 Aluminum Sheet Drawing Compounds Compatible with Structural Adhesives Replaced by 9981873

AT-ON

ONORM EN 2243-3-1992 Aerospace series - Structural adh?sives - Test methods -Peeling test metal-honeycomb core

VDI - Verein Deutscher Ingenieure

VDI 2038 Blatt 1-2010 Serviceability of structures under dynamic loads - Methods of analysis and evaluation in structural dynamics - Basics - Methods@ procedures and loads

BELST

STB 2080-2010 Building. Heat insulation systems of external envelopes of buildings and structures.Ventilated systems. Test methods

BE-NBN

NBN-EN 2243-2-1992 Aerospace series. Structural adhesives. experiment method. Part 2: Metal peeling test. Metal

PT-IPQ

NP ENV 1998-5-2002 Eurocode 8:Design provisions for earthquake resistance of structures Part 5:Foundations,retaining structures and geotechnical aspects

Others: