Threaded connection standard dimensions

Threaded connection standard dimensions, Total:123 items.

The international standard classification for "Threaded connection standard dimensions" includes: Control components .

The Chinese standard classification for "Threaded connection standard dimensions" includes: Hydraulic and pneumatic device , Pipeline fittings .

Professional Standard - Machinery

JB/T 1752-1992 Dimensions of valve structural elements external thread connection end
JB/T 6377-1992 Pneumatic Type and Dimensions of Gas Port Connection Screw Thread

未注明发布机构

DIN EN 148-1 E:2017-08 Respiratory protective devices - Threads for facepieces - Part 1: Standard thread connection
DIN 20353 E:2015-10 Rock drilling - Trapezoidal thread connection for percussive drilling - Dimensions, design
SAE AS4320-2007 FITTING END, STRAIGHT THREAD, STANDARD DIMENSIONS FOR, DESIGN STANDARD
DIN 3858:1970 Whitworth pipe threads for pipe couplings; parallel internal threads and taper external threads; thread dimensions

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 2878-1993 Fluid power systems and components―Ports―Dimensions and design
GB/T 8606-2003 Thread connecting dimensions and specifications of hydraulic fluid power - Quick action couplings
GB/Z 41983-2022 Hydraulic screw-in cartridge valves cavities—Mounting dimensions

Professional Standard-Ships

CB 3019-1986 External thread connection type and size of pipeline accessories
CB* 3019-1986 External thread connection type and size of pipeline accessories

Professional Standard - Military and Civilian Products

WJ 589-2003 Calculation of screw gauge sizes and tolerances of connecting threads between fuse and projectile, and primer and cartridge case

Taiwan Provincial Standard of the People's Republic of China

CNS 4552-1978 Rounded Trapezoidal Thread Nominal Sizes

Society of Automotive Engineers (SAE)

SAE AS4320-2015 FITTING END, STRAIGHT THREAD, STANDARD DIMENSIONS FOR, DESIGN STANDARD
SAE AS1708A-1992 FITTING END, FLARED, FEMALE, STANDARD DIMENSIONS FOR
SAE AS1708-1982 FITTING END, FLARED, FEMALE, STANDARD DIMENSIONS FOR
SAE AS85421/1-2015 FITTING END, STANDARD DIMENSIONS FOR DYNAMIC BEAM SEAL, MALE
SAE AS85421/1A-2022 FITTING END, STANDARD DIMENSIONS FOR DYNAMIC BEAM SEAL, MALE
SAE AGS1219-4-1958 AGS1219 Dimensions of Tapped Holes in Components for Connecting A.G.S. Pipe Couplings Direct
SAE AS85421/2A-2007 FITTING END, STANDARD DIMENSIONS FOR BULKHEAD, DYNAMIC BEAM SEAL, MALE
SAE AS757-2002 Boss, Straight Thread Gasket Seal, Standard Dimensions For
SAE MA2012B-2015 PORT, INTERNAL, STRAIGHT THREAD, FITTING CONNECTION, DESIGN STANDARD, METRIC
SAE AS85421/2C-2022 FITTING END, STANDARD DIMENSIONS FOR, BULKHEAD, DYNAMIC BEAM SEAL, MALE
SAE AS10051A-2020 HUBS, CONDUIT CONNECTION, STANDARD DIMENSIONS
SAE MA1567B-2018 Insert, Screw Thread, Helical Coil Metric Series, Standard Assembly Dimensions For
SAE AS10051B-2023 HUBS, CONDUIT CONNECTION, STANDARD DIMENSIONS
SAE AS930E-2013 FITTING END, STRAIGHT THREAD, PORT CONNECTION, DESIGN STANDARD
SAE AS930D-1996 FITTING END, STRAIGHT THREAD, BOSS CONNECTION, DESIGN STANDARD

SAE - SAE International

SAE AS4320-1993 Fitting End@ Straight Thread@ Standard Dimensions for@ Design Standard (FSC 4730)
SAE AS85421/1-2002 FITTING END@ STANDARD DIMENSIONS FOR DYNAMIC BEAM SEAL@ MALE
SAE AS85421/2A-2002 Fitting End@ Standard Dimensions for Bulkhead@ Dynamic Beam Seal@ Male
SAE AS757-1963 BOSS@ STRAIGHT THREAD GASKET SEAL STANDARD DIMENSION FOR
SAE AS10051-1998 Hubs@ Conduit Connection@ Standard Dimensions
SAE AS930F-2019 FITTING END@ STRAIGHT THREAD@ PORT CONNECTION@ DESIGN STANDARD

International Organization for Standardization (ISO)

ISO 228-1:1982 Pipe threads where pressure-tight joints are not made on the threads; Part 1 : Designation, dimensions and tolerances
ISO 228-1:1994 Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation
ISO 7320:1992 Aerospace; couplings, threaded and sealed, for fluid systems; dimensions
ISO 7320:2021 Aerospace - Couplings, threaded and sealed, for fluid systems - Dimensions
ISO 7-1:1982 Pipe threads where pressure-tight joints are made on the threads; Part 1 : Designation, dimensions and tolerances

Danish Standards Foundation

DS/ISO 228/1:1983 Pipe threads where pressure-tight joints are not made on the threads. Part 1: Designation, dimensions and tolerances
DS/EN 175201-804:2001 Detail specification: Circular connectors - Round contacts, size diameter 1,6 mm, threaded coupling
DS/ISO 7/1:1983 Pipe threads where pressure-tight joints are made on the threads. Part 1: Designation, dimensions and tolerances

RO-ASRO

STAS 5326-1979 SCREW THREAD FOR CYCLES Nominal prolile and sizes
STAS 402-1988 PIPE TIIREADS WIIERE PRESSURE-TIGUT JOINTS ARE MADE ON TUE FHREADS Dimensions and tolerances
STAS 12080/2-1989 Stainless steel fittings lor food industry TYPE R THREADED COUPLINGS. Dimensions
STAS 12080/3-1984 Stainless steel fittings for food industry T TYPE THREADED COUPLINGS Dimensions

SE-SIS

SIS SMS 1708-1961 Schrader thread, external spinal thread, standard and material sizes
SIS SMS 681-1947 Round thread. Nominal size
SIS SMS 365-1949 Bicycle thread. Nominal size
SIS SS-EN 148-1-1990 Respiratory protective devices — Threads for facepieces — Standard thread connec- tion
SIS SS 2630-1991 Welding equipment — TIG Torches — Threads, dimensions and marking
SIS SMS 1707-1961 American pipe thread, sealed type, internal tapered pipe thread NPTF nominal and material dimensions
SIS SEN 30 08 20-1965 Edison screw threads Dimensions
SIS SMS 1706-1961 American pipe thread, sealed type, external tapered pipe thread NPTF nominal and material dimensions
SIS SMS 1705-1961 American pipe thread, sealed type, internal cylindrical pipe thread NPSF nominal and material dimensions
SIS SS 1711-1978 UNC-threads, dimensioned for coating — Thread tolerances

RU-GOST R

GOST 22525-1977 Threaded pipeline connections. Pipe nipple ends for union nuts. Construction
GOST 23357-1978 Threaded pipeline connections. Joint washers for radial mounting. Construction
GOST 21971-1976 Threaded piping joints. Conventional passages (nominal sizes). Series
GOST 22526-1977 Threaded pipeline connections. Screwed pipe nipple ends and sockets for them. Construction
GOST 8967-1975 Pipe steel connections with cylindrical thread for pipelines P = 1,6 MPa. Nippels. Basic dimensions
GOST 16070-1970 Unions screwed for rubber packer for tube connections on internal cone. Construction and dimensions
GOST 16039-1970 Threaded ends of fittings for tube connections on internal cone. Construction and dimensions

German Institute for Standardization

DIN EN ISO 228-1 Bb.1:2003 Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation; Limits of size
DIN 2510-2:1971 Bolted Connections with Reduced Shank; Metric Thread with Large Clearence, Nominal Dimensions and Limits
DIN 2510-2:2023-05 Bolted connections with waisted shank - Part 2: Metric thread with large clearance - Nominal dimensions and limits of size / Note: Date of issue 2023-03-31*Intended as replacement for DIN 2510-2 (1971-08).
DIN EN ISO 228-1:2003 Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000); German version EN ISO 228-1:2003
DIN 19004:1980 Screw threads of shutter cable release; tip and socket, connecting dimensions
DIN 20353:2016-03 Rock drilling - Trapezoidal thread connection for percussive drilling - Dimensions, design
DIN 19004:1980-08 Screw threads of shutter cable release; tip and socket, connecting dimensions
DIN EN 148-1:1999 Respiratory protective devices - Threads for facepieces - Part 1: Standard thread connection; German version EN 148-1:1999
DIN 20317:2014-02 Rock drilling - Round thread connections for percussive drilling equipment - Dimensions, design
DIN 2510-2:1971-08 Bolted Connections with Reduced Shank; Metric Thread with Large Clearence, Nominal Dimensions and Limits
DIN EN 175201-804:2000-09 Detail specification - Circular connectors - Round contacts, size diameter 1,6 mm, threaded coupling; German version EN 17201-804:1999
DIN 30295-1:1973-05 Rounded Trapezoidal Threads; Nominal Dimensions
DIN 20317:2014 Rock drilling - Round thread connections for percussive drilling equipment - Dimensions, design

GSO

OS GSO ASTM B302:2009 Standard Specification for Threadless Copper Pipe, Standard Sizes

American Society for Testing and Materials (ASTM)

ASTM B302-00 Standard Specification for Threadless Copper Pipe, Standard Sizes
ASTM B302-17 Standard Specification for Threadless Copper Pipe, Standard Sizes
ASTM B302-07 Standard Specification for Threadless Copper Pipe, Standard Sizes
ASTM B302-12 Standard Specification for Threadless Copper Pipe, Standard Sizes
ASTM B302-02 Standard Specification for Threadless Copper Pipe, Standard Sizes

AT-ON

ONORM EN 148 Teil.1-1988 Respiratory protective devices; threads forfacepieces; Standard thread connection

CZ-CSN

CSN 13 7710-1960 Screwed pipe joints, nonsoldered used in mechanical engineering. Therads and struotural dimensions
CSN EN 148-1-1994 Respiratory protective devices-Threads for facepieces-Standard thread connection
CSN 37 0913-1981 Switching devices. Connecting threaded bolts to 3 200 A. Rated currepts and dimensions

IT-UNI

UNI ISO 228-P1:1983 Pipe threads for non-threaded sealing connections. Name, size and deviation

Korean Agency for Technology and Standards (KATS)

KS B ISO 7-1:2007 Pipe threads where pressure－tight joints are made on the threads－Dimensions, tolerances and designation
KS M 6591-1979 Standard size of screw for rubber extruder
KS W 1545-1999 Pipe threads where pressuretight joints are not made on the threads-Part 1:Dimensions, tolerances and designation
KS B ISO 228-1-2007(2017) Pipe threads where pressure－tight joints are not made on the threads－Part 1：Dimensions, tolerances and designation

BE-NBN

NBN-EN 148-1-1989 Respiratory protective devices - Threads for facepieces - Standard thread connection

Association Francaise de Normalisation

NF E48-051:1992 Hydraulic fluid power. Pipe threaded connections for supply ports. Connecting dimensions.
NF EN ISO 228-1:2003 Pipe threads for connection without sealing in the thread - Part 1: dimensions, tolerances and designation
NF ISO 262:2023 Metric ISO threads for general purposes - Selection of dimensions for bolting
NF EN 10226-1:2004 Pipe threads for connection with thread sealing - Part 1: Tapered external threads and cylindrical internal threads - Dimensions, tolerances and designation
NF EN 10226-2:2005 Pipe threads for connection with thread sealing - Part 2: tapered external threads and tapered internal threads - Dimensions, tolerances and designation
NF R94-301:1989 Road vehicles. Threading connection for components including an "0" ring. Dimensional characteristics.

American National Standards Institute （ANSI)

ANSI/ASME B1.30-2002 Screw Threads: Standard Practice for Calculating and Rounding Dimensions

British Standards Institution (BSI)

BS EN ISO 228-1:2003 Pipe threads where pressure-tight joints are not made on the threads - Dimensions, tolerances and designation
BS EN 148-1:2018 Respiratory protective devices. Threads for facepieces. Standard thread connection
BS EN 148-1:1999 Respiratory protective devices: threads for facepieces - Standard thread connection
BS 6356-3:1985 Spraying equipment for crop protection. Specification for dimensions of connection threading
BS ISO 725:2009 ISO inch screw threads - Basic dimensions

API - American Petroleum Institute

API STD 12B-1929 DIMENSIONAL SPECIFICATIONS For STANDARD BOLTED TANKS (FIRST EDITION)

Aerospace Industries Association/ANSI Aerospace Standards

AIA/NAS NASM33537-2002 Insert, Screw Thread, Helical Coil, Inch Series, Coarse and Fine Thread, Standard Assembly Dimensions for FSC 5340
AIA/NAS NASM33537-2009 INSERT, SCREW THREAD, HELICAL COIL, INCH SERIES, COARSE AND FINE THREAD, STANDARD ASSEMBLY DIMENSIONS FOR Rev 1

FI-SFS

SFS B.1.41-1957 Unified-karkeakierteet(UNC-kierteet)Nimellismitat 1/4 in ... 4 in
SFS B.2.59-1964 Mechanical drawing thread drawing and connecting dimensions

SCC

DIN 20353:2016 Rock drilling - Trapezoidal thread connection for percussive drilling - Dimensions, design
NS 5580:1983 Pipe threads where pressure-tight joints are made on the threads — Designation, dimensions and tolerances(ISO 7-1:1982)
DIN 2510-2 E:2023 Draft Document - Bolted connections with waisted shank - Part 2: Metric thread with large clearance - Nominal dimensions and limits of size
ASME B1.30-1992 Screw Threads - Standard Practice for Calculating and Rounding Dimensions
DANSK DS/EN 175201-804:2000 Detail specification: Circular connectors – Round contacts, size diameter 1,6 mm, threaded coupling
BS 7156-1:1990 Respiratory protective devices: threads for facepieces-Specification for standard thread connection
DIN 20317 E:2011 Draft Document - Rock drilling - Round thread connections for percussive drilling equipment - Dimensions, design

American Society of Mechanical Engineers (ASME)

ASME B1.30M-1992 Screw threads - Standard practice for calculating and rounding dimensions
ASME B1.30-2002(R2022) Screw Threads: Standard Practice for Calculating and Rounding Dimensions
ASME B1.30-2002 Screw Threads: Standard Practice for Calculating and Rounding Dimensions

Defense Logistics Agency

DLA AND10050 REV 21-2005 BOSSES, STANDARD DIMENSIONS FOR GASKET SEAL STRAIGHT THREAD
DLA AND10050 REV 21 VALID NOTICE 1-2012 Bosses, Standard Dimensions for Gasket Seal Straight Thread

Lithuanian Standards Office

LST EN 175201-804-2002 Detail specification: Circular connectors. Round contacts, size diameter 1, 6 mm, threaded coupling

TH-TISI

TIS 1021-1991 Standard for threaded end connection turbine type water meter

Others: mj thread standard size,iso thread standard size tolerance,iso thread standard size tolerance,Respiratory protective devices - threads for masks - standard threaded connections,Plug thread standard size