iso thread standard size tolerance

iso thread standard size tolerance, Total:465 items.

The international standard classification for "iso thread standard size tolerance" includes: Special screw threads , Taps and threading dies .

The Chinese standard classification for "iso thread standard size tolerance" includes: Basic standards and general methods , Cutting tools .

Military Standard of the People's Republic of China-General Armament Department

GJB 3.3-1985 Dimensions and tolerances of MJ threaded pipe fittings threads
GJB 3.4-1985 Dimensions and tolerances of threads of MJ threaded structural parts
GJB 3.2-1982 MJ threaded bolt and nut thread dimensions and tolerances

Professional Standard - Aerospace

QJ 160-1974 Ordinary thread gauge thread profile dimensions and tolerances
QJ 164-1974 Thread profile dimensions and tolerances of thread gauges before plating

Taiwan Provincial Standard of the People's Republic of China

CNS 10792-1984 Metric Tapered External Screw Threads with Mating Parallel Internal Screw Threads (Nominal Dimensions and Permissible Deviations)
CNS 4372-1978 Round Thread with Clearance and Steep Flank with Pitch 7mm (Limits of Sizes and Deviations--Tolerances and Permissible Wear of Thread Gauges)
CNS 530-1978 Iso Metric Screw Threads-Tolerances-Limits of Sizes for Commercial Bolt and Nut Threads--Medium Quality
CNS 4553-1978 Rounded Trapezoidal Thread Limits of Sizes and Deviations Tolerances and Permissible Weal of Thread Gauges

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 20334-2006 Ground thread taps for pipe threads G series and Rp series - Tolerances on the threaded portion
GB/T 15054.2-2018 Miniature screw threads—Part 2:Tolerances and limits of size

未注明发布机构

FED-STD-H28 6A(1) NOT 1 Unified thread size standards

Swedish Institute for Standards

SS 1747:1979 Screw calliper gauges - Profiles and tolerances for ISO inch screw threads
SS 3194:1988 ISO inch screw threads - Hot dip galvanizing of external screw threads (UNC threads) - Tolerances and limits of sizes
SS 1748:1979 Screw calliper gauges - Profiles and tolerances for setting plugs for ISO inch screw threads
SS 1746:1979 Screw ring gauges - Profiles and tolerances for ISO inch screw threads
SS-ISO 965-5:2003 ISO general purpose metric screw threads - Tolerances - Part 5: Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing
SS 1925:1988 ISO inch screw threads with coarse pitch - Screw thread tolerances for metal end of studs
SS 1715:1988 ISO general purpose metric screw threads - Selected sizes for screw threads with fine pitch
SS-EN ISO 228-1:2003 Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000)
SS 1745:1979 Screw plug gauges and plain plug gauges - Profiles and tolerances for ISO inch screw threads
SS-EN 10226-2:2005 Pipe threads where pressure tight joints are made on the threads - Part 2: Taper external threads and taper internal threads - Dimensions, tolerances and designation
SS-EN 10226-1:2005 Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads - Dimensions, tolerances and designation
SS 1924:1988 ISO general purpose metric screw threads with coarse pitch - Screw thread tolerances for metal end of studs

SE-SIS

SIS SS 1711-1978 UNC-threads, dimensioned for coating — Thread tolerances
SIS SS 1712-1978 UNF-threads, dimensioned for coating - Thread tolerances
SIS SS 3193-1988 ISO general purpose metric screw threads — Hot dip galvanizing of external screw threads — Tolerances and limitsof sizes
SIS SS 3194-1988 ISO inch screw threads- Hot dip galvanizing of external screw threads (UNC threads) - Tolerances and limits of sizes
SIS SMS 3194 E-1974 G?ngtoleranser och gr?nsm?tt vid varmf?rzinkning av utv?ndiga grovg?ngor, UNC
SIS SMS 3193 E-1974 G?ngtoleranser och gran sm?tt vid varmf?rzinkning av utv?ndiga grovg?ngor
SIS SMS 2171-1973 Metric screw threads. Tolerances. Limits of sizes for commercial bolt and nut threads. Medium quality
SIS SMS 2-1972 ISO metric screw threads. Selected sizes for screw threads with coarse pitch
SIS SMS 2171-1966 Metric screw threads. Tolerances. Limits of sizes for medium quality commercial bolt and nut threads
SIS SS 3357-1980 Screw threads -Asymmetrical trapezoidal screw threads of plastic material - Basic dimensions and screw thread tolerances - Metric series
SIS SMS 1755-1974 Hexagon nuts. General dimensions. ISO metric screw threads
SIS SS-ISO 2904:1980 ISO metric trapezoidal screw threads — Basic dimensions
SIS SS 3358-1980 ISO metric trapezoidal screw threads - Limits of sizes
SIS SS-ISO 965/2:1984 ISO general purpose metric screw threads - Tolerances - Part 2: Limits of sizes for general purpose bolt and nut threads- Medium quality
SIS SS-ISO 2903:1988 ISO metric trapezoidal screw threads — Tolerances
SIS SMS 1357-1950 Instruments, Thread Tolerances, Minimum Reference Threads, Minimum or New High Standard Tolerances, Standard Diameters 1-20
SIS SS 1715-1988 /SO genera/purpose metric screw threads — Selected sizes for screw threads with fine pitch
SIS SS-ISO 724:1988 ISO general purpose metric screw threads — Basic dimensions
SIS SMS 1249-1972 ISO metric screw threads. Selected sizes for fittings for pipes
SIS SMS 1708-1961 Schrader thread, external spinal thread, standard and material sizes
SIS SMS 2160-1972 ISO general purpose metric screw threads. Selected sizes for screws, bolts and nuts
SIS SMS 2170-1966 Metric screw threads. Tolerances. Deviations for constructional threads
SIS SMS 2170-1973 Metric screw threads. Tolerances. Deviations for constructional threads.
SIS SS-ISO 965/3:1984 ISO general purpose metric screw threads - Tolerances - Part 3: Deviations for constructional threads
SIS SMS 2161-1972 ISO general purpose metric screw threads. Selected sizes for screws, bolts and nuts
SIS SMS 1710-1960 M thread, coating size, fixed tolerance, class m-ud5 and m-ud10
SIS SS 1747-1979 Screw calliper gauges — Profiles and tolerances for ISO inch screw threads
SIS SS-ISO 7/1:1985 Pipe threads where pressure-tight joints are made on the threads - Part 1: Desig- nation, dimensions and tolerances

Ente Nazionale Italiano di Unificazione

UNI EN ISO 228-1:2003 Pipe threads where pressure-tight joints are not made on the threads - Dimensions, tolerances and designation
UNI ISO 965-5:2022 ISO general purpose metric screw threads - Tolerances - Part 5: Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing
UNI 7324:1974 ISO metric threads with triangular profile. Tolerance system for interference fits.
UNI ISO 965-2:2020 ISO general purpose metric screw threads - Tolerances - Part 2: Limits of sizes for general purpose external and internal screw threads - Medium quality
UNI ISO 7-1:2003 Pipe threads where pressure-tight joints are made on the threads - Dimensions, tolerances and designation
UNI ISO 7-1:1984 Pipe threads where pressure-tight joints are made on the threads. Designation, dimensions and tolerances.
UNI 4535-P:1960 ISO Metric Triangular Profile Threads Nominal Sizes
UNI ISO 965-4:2022 ISO general purpose metric screw threads - Tolerances - Part 4: Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing
UNI 4535:2016 ISO threads with a triangular profile - Nominal sizes
UNI ISO 228-1:1983 Pipe threads where pressure-tight joints are not made on the threads. Designation, dimensions and tolerances.
UNI EN 10226-2:2006 Pipe threads where pressure tight joints are made on the threads - Part 2: Taper external threads and taper internal threads - Dimensions, tolerances and designation
UNI EN 10226-1:2006 Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads - Dimensions, tolerances and designation
UNI 5544:1965 Iso metric threads with triangular profile. Limits of size of the close class threads with 4h5h/4h tolerance, for bolts, screws and nuts.
UNI 5546:1965 Iso metric threads with triangular profile. Limits of size of the coarse class threads with 7h/8g tolerance, for bolts, screws and nuts.
UNI ISO 262:2022 ISO general purpose metric screw threads - Selected sizes for screws, bolts and nuts
UNI ISO 262:2023 ISO general purpose metric screw threads - Selected sizes for bolts, screws, studs and nuts

Association Francaise de Normalisation

NF E03-504:1970 ISO miniature screw threads.tolerances.tables for limits of sizes.
NF E03-055:1982 METRIC TRIANGULAR SCREW THREADS ISO SCREW THREAD TOLERANCE SYSTEM. LIMITS OF SIZES TABLES FOR DIAMETERS 40 TO 100 MM.
NF E03-057*NF ISO 965-5:2004 ISO general purpose metric screw threads - Tolerances - Part 5 : limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing.
NF F00-016:1992 Railway equipment in general - Round threads - Dimensions and tolerances
NF ISO 965-5:2004 ISO metric threads for general purposes - Tolerances - Part 5: limit dimensions for internal threads for assemblies with hot-dip galvanized external threads of maximum tolerance position h before galvanizing
NF E03-004-1*NF EN 10226-1:2004 Pipe threads where pressure tight joints are made on the threads - Part 1 : taper external threads and parallel internal threads - Dimensions, tolerances and designation.
NF ISO 2904:2020 Metric ISO Trapezoidal Threads - Basic Dimensions
NF ISO 724:2023 ISO Metric Threads for General Purposes - Basic Dimensions
NF E03-053/A1*NF ISO 965-2/A1:2021 ISO general purpose metric screw threads - Tolerances - Part 2 : limits of sizes for general purpose external and internal screw threads - Medium quality - Amendment 1
NF ISO 965-2/A1:2021 ISO general purpose metric screw threads - Tolerances - Part 2: Limiting dimensions for general purpose internal and external screw threads - Medium quality - Amendment 1
NF ISO 965-2:2024 ISO general purpose metric screw threads - Tolerances - Part 2 : limits of sizes for internal and external threads (tolerance classes 6H and 6g for M1,6 to M100 and 5H and 6h for M1 to M1,4)
NF ISO 965-5/A1:2021 ISO metric threads for general purposes - Tolerances - Part 5: limit dimensions for internal threads for assemblies with hot-dip galvanized external threads of maximum tolerance position h before galvanizing - Ame...
NF E03-057/A1*NF ISO 965-5/A1:2021 ISO general purpose metric screw threads - Tolerances - Part 5 : limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing - Amendment 1
NF ISO 2903:2016 ISO trapezoidal metric threads - Tolerances
NF ISO 965-2:1999 ISO general purpose metric screw threads - Tolerances - Part 2: Limiting dimensions for general purpose internal and external threads. Medium quality
NF E03-056:1970 ISO SYSTEM OF TOLERANCES FOR SCREW THREADS. COARSE QUALITY 7H/8 G FOR SCREWS AND BOLTS.
NF ISO 965-4:2021 ISO metric threads for general purposes - Tolerances - Part 4: limit dimensions for hot-dip galvanized external threads for assemblies with internal threads of tolerance position H or G after galvanizing
NF EN ISO 228-1:2003 Pipe threads for connection without sealing in the thread - Part 1: dimensions, tolerances and designation
NF L22-024:1967 List of standards for aircraft fasteners. ISO threads to ISO tolerances.
NF L22-201:1984 Bolt, hexagonal head, short thread, close tolerance. ISO thread.
NF E03-053*NF ISO 965-2:1999 ISO general purpose metric screw threads. Tolerances. Part 2 : limits of sizes for general purpose external and internal screw threads. Medium quality.
NF L40-112:1987 Aerospace fitting joint assembly, radial sealing. Male thread fittings. ISO metric thread profile and tolerances. Dimensions.
NF L40-113:1987 Aerospace fitting joint assembly, radial sealing. Internal thread bosses. ISO metric thread profile and tolerances. Dimensions.
NF E03-055:2004 ISO general purpose metric screw threads - Tolerances - Part 4 : limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing.
NF E03-055*NF ISO 965-4:2021 ISO general purpose metric screw threads - Tolerances - Part 4 : limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing
NF EN 10226-1:2004 Pipe threads for connection with thread sealing - Part 1: Tapered external threads and cylindrical internal threads - Dimensions, tolerances and designation
NF E03-503:1970 ISO miniature screw threads.tolerances.general plan.
NF E03-617*NF ISO 2903:2016 ISO metric trapezoidal screw threads - Tolerances
NF E03-617:1997 ISO metric trapezoidal screw threads. Tolerances.
NF EN 10226-2:2005 Pipe threads for connection with thread sealing - Part 2: tapered external threads and tapered internal threads - Dimensions, tolerances and designation
NF ISO 965-3:2021 ISO metric screw threads for general purposes - Tolerances - Part 3: Limit deviations for screw threads
NF L22-202:1984 Bolt, hexagonal head, short thread, close tolerance with locking hole. ISO thread.

British Standards Institution (BSI)

BS ISO 965-5:2025 ISO general purpose metric screw threads. Tolerances - Limits of sizes for internal threads to mate with hot-dip galvanized external threads with maximum size of tolerance position h before galvanizing
BS ISO 965-5:1998+A1:2021 ISO general purpose metric screw threads. Tolerances - Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing
24/30480923 DC BS ISO 965-2 ISO general purpose metric screw threads — Tolerances - Part 2: Limits of sizes for general purpose external and internal threads — Medium tolerance quality
BS ISO 965-2:1998+A1:2021 ISO general purpose metric screw threads. Tolerances - Limits of sizes for general purpose external and internal screw threads. Medium quality
24/30480929 DC BS ISO/DIS 965-5. ISO general purpose metric screw threads. Tolerances - Part 5. Limits of sizes for internal threads to mate with hot dip galvanized external threads with maximum size of tolerance position h before galvanizing
20/30423722 DC BS ISO 965-5 AMD1. ISO general purpose metric screw threads. Tolerances. Part 5. Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing
24/30479320 DC BS ISO 2903-2 ISO metric trapezoidal screw threads - Tolerances - Part 2: Limits of sizes
24/30479317 DC BS ISO 965-6 ISO general purpose metric screw threads - Tolerances - Part 6: Limits of sizes for internal and external threads (Fine and medium tolerance qualities, first and second choices)
BS ISO 965-4:2025 ISO general purpose metric screw threads. Tolerances - Limits of sizes for hot-dip galvanized external threads to mate with internal threads made to tolerance position H or G after galvanizing
BS ISO 965-4:2021 ISO general purpose metric screw threads. Tolerances. Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing
20/30423713 DC BS ISO 965-2 AMD1. ISO general purpose metric screw threads. Tolerances. Part 2. Limits of sizes for general purpose external and internal screw threads. Medium quality
BS ISO 965-5:1999 ISO general purpose metric screw threads. Tolerances. Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing
BS ISO 965-3:2021 ISO general purpose metric screw threads. Tolerances. Limit deviations for screw threads
BS ISO 965-5:1998 ISO general purpose metric screw threads - Tolerances - Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing
24/30480926 DC BS ISO 965-4 ISO general purpose metric screw threads - Tolerances - Part 4: Limits of sizes for hot dip galvanized external threads to mate with internal threads made to tolerance position H or G after galvanizing
BS ISO 724:2023 ISO general purpose metric screw threads. Basic dimensions
BS ISO 2904:2020 ISO metric trapezoidal screw threads. Basic dimensions
BS ISO 965-2:2024 ISO general purpose metric screw threads. Tolerances - Limits of sizes for internal and external threads (tolerance classes 6H and 6g for M1,6 to M100 and 5H and 6h for M1 to M1,4)
BS ISO 965-2:1999 ISO general purpose metric screw threads. Tolerances. Limits of sizes for general purpose external and internal screw threads. Medium quality
BS ISO 965-2:1998 ISO general purpose metric screw threads - Tolerances - Limits of sizes for general purpose external and internal screw threads - Medium quality
20/30423719 DC BS ISO 965-4. ISO general purpose metric screw threads. Tolerances. Part 4. Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing
19/30397491 DC BS ISO 2904. ISO metric trapezoidal screw threads. Basic dimensions
BS ISO 2903:2016 ISO metric trapezoidal screw threads. Tolerances
BS ISO 2903:2016(2020) ISO metric trapezoidal screw threads — Tolerances
BS EN ISO 228-1:2003 Pipe threads where pressure-tight joints are not made on the threads - Dimensions, tolerances and designation
BS 3643-2:1966 ISO metric screw threads. Limits and tolerances for coarse pitch threads
20/30423716 DC BS ISO 965-3. ISO general purpose metric screw threads. Tolerances. Part 3. Limit deviations for screw threads
BS ISO 725:2009 ISO inch screw threads - Basic dimensions
BS 3643-1:1963 ISO metric screw threads. Thread data and standard thread series
BS ISO 965-4:1999 ISO general purpose metric screw threads. Tolerances. Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing
BS ISO 965-4:1998 ISO general purpose metric screw threads - Tolerances - Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing

FI-SFS

SFS 2003-1966 Tolerances of thread dimensions in metric ISO-thread statistics. Diameter 1.6...39mm
SFS 2004-1966 Tolerances of thread dimensions in metric ISO-thread statistics. Diameter 40...100mm
SFS 3262-1975 ISO tolerance. Tolerance dimensions of groove and shaft

International Organization for Standardization (ISO)

ISO 965-5:1998/Amd 1:2021 ISO general purpose metric screw threads — Tolerances — Part 5: Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance positio
ISO 965-5:1998 ISO general purpose metric screw threads - Tolerances - Part 5: Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing
ISO/CD 965-5:2023 ISO general purpose metric screw threads — Tolerances — Part 5: Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing
ISO 965-5:2025 ISO general purpose metric screw threads — Tolerances — Part 5: Limits of sizes for internal threads to mate with hot-dip galvanized external threads with maximum size of tolerance position h before galvanizing
ISO 228-1:2000 Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation
ISO 228-1:1978 Title missing - Legacy paper document
ISO 7-1:1994 Pipe threads where pressure-tight joints are made on the threads - Part 1: Dimensions, tolerances and designation
ISO 5864 ISO inch screw threads - Allowances and tolerances
ISO 724:1978 ISO metric screw threads — Basic dimensions
ISO 228-1:1982 Pipe threads where pressure-tight joints are not made on the threads; Part 1 : Designation, dimensions and tolerances
ISO/CD 965-2:2023 ISO general purpose metric screw threads — Tolerances — Part 2: Limits of sizes for general purpose external and internal screw threads — Medium quality
ISO 965-2:1998 ISO general purpose metric screw threads - Tolerances - Part 2: Limits of sizes for general purpose external and internal screw threads - Medium quality
ISO 965-2:2024 ISO general purpose metric screw threads - Tolerances - Part 2: Limits of sizes for internal and external threads (tolerance classes 6H and 6g for M1,6 to M100 and 5H and 6h for M1 to M1,4)
ISO 965-4:2025 ISO general purpose metric screw threads — Tolerances — Part 4: Limits of sizes for hot-dip galvanized external threads to mate with internal threads made to tolerance position H or G after galvanizing
ISO 965-4:1998 ISO general purpose metric screw threads - Tolerances - Part 4: Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing
ISO/CD 965-4:2023 ISO general purpose metric screw threads — Tolerances — Part 4: Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing
ISO 2904:1977 ISO metric trapezoidal screw threads; Basic dimensions
ISO 724:2023 ISO general purpose metric screw threads — Basic dimensions
ISO 965-4:2021 ISO general purpose metric screw threads - Tolerances - Part 4: Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing
ISO 2904:2020 ISO metric trapezoidal screw threads — Basic dimensions
ISO 724:1993 ISO general-purpose metric screw threads; basic dimensions
ISO 965-2:1998/Amd 1:2021 ISO general purpose metric screw threads - Tolerances - Part 2: Limits of sizes for general purpose external and internal screw threads - Medium quality; Amendment 1
ISO 7-1 Pipe threads where pressure-tight joints are made on the threads - Part 1: Dimensions, tolerances and designation
ISO 2903:2016 ISO metric trapezoidal screw threads - Tolerances
ISO 2903:1977 ISO metric trapezoidal screw threads — Tolerances
ISO 2903:1993 ISO metric trapezoidal screw threads; tolerances
ISO 228-1:1994 Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation
ISO 965-2:1973 Title missing - Legacy paper document
ISO 965-3:2021 ISO general purpose metric screw threads - Tolerances - Part 3: Limit deviations for screw threads
ISO 965-3:1998 ISO general purpose metric screw threads - Tolerances - Part 3: Deviations for constructional screw threads
ISO 262:1998 ISO general purpose metric screw threads - Selected sizes for screws, bolts and nuts
ISO 5864:1978 ISO inch screw threads; Allowances and tolerances
ISO 7-1:1994/cor 1:2007 Pipe threads where pressure-tight joints are made on the threads - Part 1: Dimensions, tolerances and designation; Technical Corrigendum 1

European Committee for Standardization (CEN)

EN ISO 228-1:2003 Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation ISO 228-1: 2000

German Institute for Standardization

DIN 103-4:1977-04 ISO Metric Trapezoidal Screw Thread; Nominal Dimensions
DIN 103-4:1971 ISO Metric Trapezoidal Screw Thread; Nominal Dimensions
DIN ISO 965-5:2025-06 ISO general purpose metric screw threads - Tolerances - Part 5: Limits of sizes for internal threads to mate with hot-dip galvanized external threads with maximum size of tolerance position h before galvanizing (ISO 965-5:2025)
DIN ISO 965-2:2024-04 ISO general purpose metric screw threads - Tolerances - Part 2: Limits of sizes for general purpose external and internal threads - Medium tolerance quality (ISO/DIS 965-2:2024); Text in German and English
DIN ISO 965-2:1999-11 ISO general purpose metric screw threads - Tolerances - Part 2: Limits of sizes for general purpose external and internal screw threads; medium quality (ISO 965-2:1998) / Note: To be amended by DIN ISO 965-2/A1 (2021-01).
DIN ISO 965-2 Berichtigung 1:2017-03 ISO general purpose metric screw threads - Tolerances - Part 2: Limits of sizes for general purpose external and internal screw threads; medium quality (ISO 965-2:1998), Corrigendum to DIN ISO 965-2:1999-11
DIN ISO 965-5:2024-04 ISO general purpose metric screw threads - Tolerances - Part 5: Limits of sizes for internal threads to mate with hot dip galvanized external threads with maximum size of tolerance position h before galvanizing (ISO/DIS 965-5:2024)
DIN ISO 965-5:2002-05 ISO general purpose metric screw threads - Tolerances - Part 5: Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing (ISO 965-5:1998) / Note: To b...
DIN ISO 965-2 E:2024 Draft Document - ISO general purpose metric screw threads - Tolerances - Part 2: Limits of sizes for general purpose external and internal threads - Medium tolerance quality (ISO/DIS 965-2:2024); Text in German and English
DIN ISO 965-2 E:2024-04 Draft Document - ISO general purpose metric screw threads - Tolerances - Part 2: Limits of sizes for general purpose external and internal threads - Medium tolerance quality (ISO/DIS 965-2:2024); Text in German and English
DIN ISO 965-5 E:2024 Draft Document - ISO general purpose metric screw threads - Tolerances - Part 5: Limits of sizes for internal threads to mate with hot dip galvanized external threads with maximum size of tolerance position h before galvanizing (ISO/DIS 965-5:2024); Te.
DIN ISO 965-5 E:2024-04 Draft Document - ISO general purpose metric screw threads - Tolerances - Part 5: Limits of sizes for internal threads to mate with hot dip galvanized external threads with maximum size of tolerance position h before galvanizing (ISO/DIS 965-5:2024); Te...
DIN 8141-1:1993-07 ISO-metric screw threads; coarse pitch threads and fine pitch threads for interference fits in aluminium cast alloys; nominal diameter from 5 mm to 16 mm; nominal sizes, tolerances and limits of sizes
DIN ISO 965-2:1999 ISO Universal Metric Threads Tolerances Part 2: Dimensional Limitations for Universal External and Internal Threads Medium Quality
DIN ISO 965-5/A1 E:2021-01 Draft Document - ISO general purpose metric screw threads - Tolerances - Part 5: Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing - Amendment ...
DIN ISO 965-5/A1:2021-01 ISO general purpose metric screw threads - Tolerances - Part 5: Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing - Amendment 1 (ISO 965-5:1998...
DIN 14-2:1987-02 ISO-metric screw thread; screw threads below 1 mm diameter; nominal dimensions
DIN ISO 965-5/A1 E:2021 Draft Document - ISO general purpose metric screw threads - Tolerances - Part 5: Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing - Amendment ...
DIN 13-51:2005-08 ISO general purpose metric screw threads - Part 51: External screw threads for transition fits (former: screw threads for interference fit); tolerances, limit deviations, limits of sizes
DIN 13-51:2013-10 ISO general purpose metric screw threads - Part 51: External screw threads for transition fits (former: screw threads for interference fit) - tolerances, limit deviations, limits of sizes
DIN 13-23:2005-08 ISO general purpose metric screw threads - Part 23: Limits of sizes for fine pitch threads with the prefered tolerance classes; Nominal diameter from 53 mm to 110 mm
DIN 13-20:2000-08 ISO general purpose metric screw threads - Part 20: Limits of sizes for coarse pitch threads with the prefered tolerance classes; nominal sizes from 1 mm to 68 mm
DIN 13-24:2005-08 ISO general purpose metric screw threads - Part 24: Limits of sizes for fine pitch threads with the prefered tolerance classes; Nominal diameter from 112 mm to 180 mm
DIN 13-25:2005-08 ISO general purpose metric screw threads - Part 25: Limits of sizes for fine pitch threads with the prefered tolerance classes; Nominal diameter from 182 mm to 250 mm
DIN 13-26:2005-08 ISO general purpose metric screw threads - Part 26: Limits of sizes for fine pitch threads with the prefered tolerance classes; Nominal diameter from 252 mm to 1000 mm
DIN 13-22:2005-08 ISO general purpose metric screw threads - Part 22: Limits of sizes for fine pitch threads with the prefered tolerance classes; Nominal diameter from 25 mm to 52 mm
DIN ISO 228-1:2001-04 Pipe threads for non-threaded sealing connections Part 1: Dimensions, tolerances and marking
DIN 13-21:2005-08 ISO general purpose metric screw threads - Part 21: Limits of sizes for fine pitch threads with the preferred tolerance classes; Nominal diameter from 1 mm to 24,5 mm
DIN 13-51 E:2012-10 ISO general purpose metric screw threads - Part 51: External screw threads for transition fits (former: screw threads for interference fit) - tolerances, limit deviations, limits of sizes
DIN 13-51:1988 ISO general purpose metric screw threads - Part 51: External screw threads for transition fits (former: screw threads for interference fit) - tolerances, limit deviations, limits of sizes
DIN 13-51 ISO general purpose metric screw threads - Part 51: External screw threads for transition fits (former: screw threads for interference fit) - tolerances, limit deviations, limits of sizes
DIN ISO 965-4:2002-05 ISO general purpose metric screw threads - Tolerances - Part 4: Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing (ISO 965-4:1998) / Note: To be rep...
DIN ISO 965-2:2025-04 ISO general purpose metric screw threads - Tolerances - Part 2: Limits of sizes for internal and external threads (tolerance classes 6H and 6g for M1.6 to M100 and 5H and 6h for M1 to M1.4) (ISO 965-2:2024)
DIN 13-51 E:2012 Draft Document - ISO general purpose metric screw threads - Part 51: External screw threads for transition fits (former: screw threads for interference fit); tolerances, limit deviations, limits of sizes
DIN ISO 965-2/A1:2021-01 ISO general purpose metric screw threads - Tolerances - Part 2: Limits of sizes for general purpose external and internal screw threads - Medium quality - Amendment 1 (ISO 965-2:1998/DAM 1:2020); Text in German and English / Note: Date of issue 2020-12...
DIN EN ISO 228-1 Supplement 1:2003 Pipe threads where pressure-tight joints are not made on the threads-part 1:dimensions,tolerances and designation-limits of size; English version of DIN EN ISO 228-1 Supplement 1:2003-05
DIN ISO 965-4:2024-04 ISO general purpose metric screw threads - Tolerances - Part 4: Limits of sizes for hot dip galvanized external threads to mate with internal threads made to tolerance position H or G after galvanizing (ISO/DIS 965-4:2024)
DIN ISO 965-4:2021-01 ISO general purpose metric screw threads - Tolerances - Part 4: Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing (ISO/DIS 965-4:2020); Text in Germ...
DIN EN ISO 228-1 Bb.1:2003 Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation; Limits of size
DIN 13-26:1983 ISO general purpose metric screw threads - Part 26: Limits of sizes for fine pitch threads with the prefered tolerance classes; Nominal diameter from 252 mm to 1000 mm
DIN 13-8:1999-11 ISO general purpose metric screw threads - Part 8: Nominal sizes for 3 mm fine pitch threads; nominal diameter from 28 mm to 300 mm
DIN ISO 724:2022-11 ISO general purpose metric screw threads - Basic dimensions (ISO/DIS 724:2022); Text in German and English / Note: Date of issue 2022-10-07*Intended as replacement for DIN ISO 724 (2010-01).
DIN 13-7:1999-11 ISO general purpose metric screw threads - Part 7: Nominal sizes for 2 mm fine pitch threads; nominal diameter from 17 mm to 300 mm
DIN 13-3:1999-11 ISO general purpose metric screw threads - Part 3: Nominal sizes for 0,5 mm fine pitch threads; nominal diameter from 3,5 mm to 90 mm
DIN ISO 724:2010-01 ISO general purpose metric screw threads - Basic dimensions (ISO 724:1993 + Cor. 1:2009) / Note: To be replaced by DIN ISO 724 (2022-11).
DIN 13-21:2005 ISO general purpose metric screw threads - Part 21: Limits of sizes for fine pitch threads with the preferred tolerance classes; Nominal diameter from 1 mm to 24,5 mm
DIN 13-26:2005 ISO general purpose metric screw threads - Part 26: Limits of sizes for fine pitch threads with the prefered tolerance classes; Nominal diameter from 252 mm to 1000 mm
DIN 13-7 Berichtigung 1:2019-08 ISO general purpose metric screw threads - Part 7: Nominal sizes for 2 mm fine pitch threads; Nominal diameter from 17 mm to 300 mm; Corrigendum 1
DIN 13-6:1999-11 ISO general purpose metric screw threads - Part 6: Nominal sizes for 1,5 mm fine pitch threads; nominal diameter from 12 mm to 300 mm
DIN 13-4:1999-11 ISO general purpose metric screw threads - Part 4: Nominal sizes for 0,75 mm fine pitch threads; nominal diameter from 5 mm to 110 mm
DIN 13-22:2005 ISO general purpose metric screw threads - Part 22: Limits of sizes for fine pitch threads with the prefered tolerance classes; Nominal diameter from 25 mm to 52 mm
DIN 13-21:1983 ISO general purpose metric screw threads - Part 21: Limits of sizes for fine pitch threads with the preferred tolerance classes; Nominal diameter from 1 mm to 24,5 mm
DIN 852-1:1991-09 Bore type thread milling cutters for ISO metric threads; dimensions
DIN ISO 965-5:2002 ISO general purpose metric screw threads - Tolerances - Part 5: Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing (ISO 965-5:1998)
DIN 158-1:1997-06 Metric external taper screw threads and mating internal parallel screw threads - Part 1: Nominal sizes, limit deviations, limits of size and verification
DIN 13-1:1999-11 ISO general purpose metric screw threads - Part 1: Nominal sizes for coarse pitch threads; nominal diameter from 1 mm to 68 mm
DIN ISO 724:1999 ISO general purpose metric screw threads - Basic dimensions (ISO 724:1993)
DIN 13-51:2013 ISO general purpose metric screw threads - Part 51: External screw threads for transition fits (former: screw threads for interference fit) - tolerances, limit deviations, limits of sizes
DIN ISO 965-4:2025-06 ISO general purpose metric screw threads - Tolerances - Part 4: Limits of sizes for hot-dip galvanized external threads to mate with internal threads made to tolerance position H or G after galvanizing (ISO 965-4:2025)
DIN EN ISO 228-1:2003 Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000); German version EN ISO 228-1:2003
DIN 13-51:2012 ISO general purpose metric screw threads - Part 51: External screw threads for transition fits (former: screw threads for interference fit); tolerances, limit deviations, limits of sizes
DIN 13-23:2005 General purpose ISO metric screw threads - Part 23: Limits of sizes for fine pitch threads with the prefered tolerance classes - Nominal diameter from 53 mm to 110 mm
DIN 13-24:1983 General purpose ISO metric screw threads - Part 24: Limits of sizes for fine pitch threads with the prefered tolerance classes - Nominal diameter from 112 mm to 180 mm8
DIN 13-23:1983 General purpose ISO metric screw threads - Part 23: Limits of sizes for fine pitch threads with the prefered tolerance classes - Nominal diameter from 53 mm to 110 mm
DIN 13-51:2005 ISO general purpose metric screw threads - Part 51: External screw threads for transition fits (former: screw threads for interference fit); tolerances, limit deviations, limits of sizes
DIN 13-25:2005 General purpose ISO metric screw threads - Part 25: Limits of sizes for fine pitch threads with the prefered tolerance classes - Nominal diameter from 182 mm to 250 mm
DIN ISO 724:1999-11 ISO general purpose metric screw threads - Basic dimensions (ISO 724:1993)
DIN 13-24:2005 General purpose ISO metric screw threads - Part 24: Limits of sizes for fine pitch threads with the prefered tolerance classes - Nominal diameter from 112 mm to 180 mm8
DIN ISO 724:2024 ISO general purpose metric screw threads - Basic dimensions (ISO 724:2023)
DIN 13-25:1983 General purpose ISO metric screw threads - Part 25: Limits of sizes for fine pitch threads with the prefered tolerance classes - Nominal diameter from 182 mm to 250 mm
DIN ISO 965-4 E:2024-04 Draft Document - ISO general purpose metric screw threads - Tolerances - Part 4: Limits of sizes for hot dip galvanized external threads to mate with internal threads made to tolerance position H or G after galvanizing (ISO/DIS 965-4:2024); Text in Ger...
DIN 13-9:1999-11 ISO general purpose metric screw threads - Part 9: Nominal sizes for 4 mm fine pitch threads; nominal diameter from 40 mm to 300 mm
DIN 13-11:1999-11 ISO general purpose metric screw threads - Part 11: Nominal sizes for 8 mm fine pitch threads; nominal diameter from 130 mm to 1000 mm
DIN 1893-1:1978-09 Disc type thread milling cutters for ISO metric trapezoidal threads; dimensions
DIN 13-10:1999-11 ISO general purpose metric screw threads - Part 10: Nominal sizes for 6 mm fine pitch threads; nominal diameter from 70 mm to 500 mm
DIN ISO 965-3:1999-11 ISO general purpose metric screw threads - Tolerances - Part 3: Deviations for constructional threads (ISO 965-3:1998) / Note: To be replaced by DIN ISO 965-3 (2021-01).
DIN ISO 965-2/A1 E:2021-01 Draft Document - ISO general purpose metric screw threads - Tolerances - Part 2: Limits of sizes for general purpose external and internal screw threads - Medium quality - Amendment 1 (ISO 965-2:1998/DAM 1:2020); Text in German and English
DIN ISO 965-4:2021 ISO general purpose metric screw threads - Tolerances - Part 4: Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing (ISO/DIS 965-4:2020); Text in German
DIN ISO 965-4 E:2021 Draft Document - ISO general purpose metric screw threads - Tolerances - Part 4: Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing (ISO/DIS 965-4:20...
DIN ISO 965-4:2002 ISO general purpose metric screw threads - Tolerances - Part 4: Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing (ISO 965-4:1998)
DIN ISO 965-3:2024-08 ISO general purpose metric screw threads - Tolerances - Part 3: Limit deviations for screw threads (ISO 965-3:2021)
DIN ISO 965-3:2021-01 ISO general purpose metric screw threads - Tolerances - Part 3: Limit deviations for screw threads (ISO/DIS 965-3:2020); Text in German and English / Note: Date of issue 2020-12-04*Intended as replacement for DIN ISO 965-3 (1999-11).
DIN 405-1-75 Tapered thread nominal size thread series
DIN ISO 965-3:2024 ISO general purpose metric screw threads - Tolerances - Part 3: Limit deviations for screw threads (ISO 965-3:2021)
DIN 13-50:1999-11 General purpose ISO metric screw threads - Tolerances for cold-formed internal threads
DIN 13-52:1999-11 General purpose ISO metric screw threads - Tolerances for multi-start threads
DIN EN ISO 228-1 Beiblatt 1:2003-05 Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation; Limits of size
DIN 6341-2:1993-10 Draw-in collets; thread of the collets; nominal size, limit deviations
DIN EN ISO 228-1 Beiblatt 1:2003 Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation - Limits of size
DIN 13-20:1999 ISO general purpose metric screw threads - Part 20: Limits of sizes for coarse pitch threads with the prefered tolerance classes; nominal sizes from 1 mm to 68 mm
DIN 103-4:1977 ISO Metric Trapezoidal Screw Thread; Nominal Dimensions
DIN 13-22:2023-12 ISO general purpose metric screw threads - Part 22: Limits of sizes for fine pitch threads with the preferred tolerance classes; Nominal diameter from 25 mm to 52 mm / Note: Date of issue 2023-11-17*Intended as replacement for DIN 13-22 (2005-08).
DIN ISO 262:2022-11 ISO general purpose metric screw threads - Selected sizes for screws, bolts and nuts (ISO/DIS 262:2022); Text in German and English / Note: Date of issue 2022-10-14*Intended as replacement for DIN ISO 262 (1999-11).
DIN 13-20:2000 ISO general purpose metric screw threads - Part 20: Limits of sizes for coarse pitch threads with the prefered tolerance classes; nominal sizes from 1 mm to 68 mm
DIN ISO 965-2:1999 ISO Universal Metric Threads Tolerances Part 2: Dimensional Limitations for Universal External and Internal Threads Medium Quality
DIN LN 9163-1:1980-12 Aerospace; ISO Metric Threads; Basic deviations and tolerances
DIN 13-22:1983 ISO general purpose metric screw threads - Part 22: Limits of sizes for fine pitch threads with the preferred tolerance classes; Nominal diameter from 25 mm to 52 mm
DIN EN ISO 228-1:2003-05 Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000); German version EN ISO 228-1:2003
DIN ISO 262:1999-11 ISO general purpose metric screw threads - Selected sizes for screws, bolts and nuts (ISO 262:1998) / Note: To be replaced by DIN ISO 262 (2022-11).
DIN 13-20 ISO general purpose metric screw threads - Part 20: Limits of sizes for coarse pitch threads with the prefered tolerance classes; nominal sizes from 1 mm to 68 mm
DIN 103-8:1972-10 ISO Metric Trapezoidal Screw Threads; Limiting Sizes for Bolt Threads from 105 to 300 mm Nominal Diameter
DIN 14-3:1987-02 ISO-metric screw thread; screw threads below 1 mm diameter; tolerances
DIN 14-2:1987 ISO-metric screw thread; screw threads below 1 mm diameter; nominal dimensions
DIN 802-5:1997-02 Tolerances on the threaded portion of tape - Part 5: Ground threaded taps for ISO metric thread; threads for interference fits according to DIN 8141-1, coarse and fine pitches; manufacturing tolerances on the threaded portion
DIN 13-52:2017-05 ISO general purpose metric screw threads - Part 52: Multi-start thread tolerances and deviation of profile
DIN 103-7:1972-10 ISO Metric Trapezoidal Screw Threads; Limiting Sizes for Bolt Threads from 8 to 100 mm Nominal Diameter
DIN 405-1:1997 General purpose knuckle threads - Part 1: Profiles, nominal sizes
DIN 103-6:1972-10 ISO Metric Trapezoidal Screw Threads; Limiting Sizes for Nut Threads from 105 to 300 mm Nominal Diameter
DIN 103-5:1972-10 ISO Metric Trapezoidal Screw Threads; Limiting Sizes for Nut Threads from 8 to 100 mm Nominal Diameter
DIN ISO 724 E:2022 Draft Document - ISO general purpose metric screw threads - Basic dimensions (ISO/DIS 724:2022); Text in German and English
DIN ISO 262:2024 ISO general purpose metric screw threads - Selected sizes for bolts, screws, studs and nuts (ISO 262:2023)
DIN ISO 262:2024-09 ISO general purpose metric screw threads - Selected sizes for bolts, screws, studs and nuts (ISO 262:2023)
DIN 30295-2:1973 Rounded Trapezoidal Threads; Limiting Screw Thread Dimensions and Allowances; Permissible Deviations and Permissible Wear of Thread Gauges
DIN 8140-2:2005-08 Wire thread inserts for ISO metric screw threads - Part 2: Helical coil threads for inserts, thread tolerances
DIN 13-15:1972 ISO metric screw threads - Fundamental deviations and tolerances for threads 1 mm diameter and larger

CH-SNV

SNV 53511-1957 Metric ISO thread M 1.6 to M 68 tolerance, size, limit size 6H/6g
SN 640 710 a-1985 Metric ISO thread M 1.6 to M 68 tolerance, size, limit size 6H/6g
VSM 23707-1971 Metric ISO thread. ISO thread tolerance basics and notes
SNV 87380-1935 ISO tolerance system. Basic tolerances. Shaft size

Danish Standards Foundation

DANSK DS/ISO 965-5:1999 ISO general purpose metric screw threads - Tolerances - Part 5: Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing
DS/ISO 228/1:1983 Pipe threads where pressure-tight joints are not made on the threads. Part 1: Designation, dimensions and tolerances
DANSK DS/ISO 965-2:1999 ISO general purpose metric screw threads - Tolerances - Part 2: Limits of sizes for general purpose external and internal screw threads - Medium quality
DS/ISO 965-2:1999 ISO general purpose metric screw threads - Tolerances - Part 2: Limits of sizes for general purpose external and internal screw threads - Medium quality
DS/ISO 965-5:1999 ISO general purpose metric screw threads - Tolerances - Part 5: Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing
DS/ISO 965-4:1999 ISO general purpose metric screw threads - Tolerances - Part 4: Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing
DANSK DS/ISO 724:1995 ISO general-purpose metric screw threads – Basic dimensions
DANSK DS/ISO 2904:2020 ISO metric trapezoidal screw threads – Basic dimensions
DS/ISO 724/Corr. 1:2009 ISO general-purpose metric screw threads - Basic dimensions
DANSK DS/ISO 965-4:1999 ISO general purpose metric screw threads - Tolerances - Part 4: Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing
DANSK DS/ISO 2903:2017 ISO metric trapezoidal screw threads – Tolerances
DS/ISO 5864:1995 ISO inch screw threads - Allowances and tolerances
DS/ISO 965-3:1999 ISO general purpose metric screw threads - Tolerances - Part 3: Deviations for constructional screw threads
DS/ISO 965-3/Corr. 1:2009 ISO general purpose metric screw threads - Tolerances - Part 3: Deviations for constructional screw threads
DS/ISO 262:1999 ISO general purpose metric screw threads - Selected sizes for screws, bolts and nuts
DANSK DS/ISO 262:1999 ISO general purpose metric screw threads – Selected sizes for screws, bolts and nuts
DS/ISO 725:2009 ISO inch screw threads - Basic dimensions
DS/ISO 2903:1995 ISO metric trapezoidal screw threads - Tolerances

IT-UNI

UNI ISO 2904:1978 ISO trapezoidal metric thread. Nominal size
UNI 4535-1964 Triangular ISO metric thread. Nominal size
UNI 5544-1965 Iso metric threads with triangular profile. Limits of size of the close class threads with 4h5h/4h tolerance, for bolts, screws and nuts.
UNI 5546-1965 Iso metric threads with triangular profile. Limits of size of the coarse class threads with 7h/8g tolerance, for bolts, screws and nuts.
UNI 5545-1965 Iso metric threads with triangular profile. Limits of size of the medium class thrads with 6h/6g tolerance, for bolts, screws and nuts.
UNI 4536-1964 Triangular ISO metric thread. Nominal dimensions of bolts and nuts (UNI 4535-64 classification)
UNI ISO 2903:1978 ISO trapezoidal metric thread. deviation
UNI 5543-1965 Iso metric threads with triangular profile. limits of size for threads with diameter from 40 up to 100 mm.
UNI 5542-1965 Iso metric threads with triangular profile. Limits of size for threads with diameter from 1,6 to 39 mm.

AT-ON

ONORM ISO 965 Teil.2:1983 ISO general purpose metnc screw threads; Tolerances; Limits ofsizes for general purpose external and internal threads; Medium quality
ONORM ISO 228 Teil.1:1982 Pipe threads where pressure-tight joints are not made on the threads; Designation, dimensions and tolerances
ONORM ISO 7 Teil.1:1984 Pipe threads where pressure-tight joints are made on the threads; Designation, dimensions and tolerances
ONORM M 1505-1974 ISO metric screw thread; fine series with 0,35 mm pitch; nominal dimensions
ONORM ISO 2904:1983 ISO metric trapezoidal screw threads; basic dimensions
ONORM ISO 965 Teil.3:1983 ISO generalpurpose metric screw threads; Tolerances; Deviations for con- structional threads
ONORM ISO 2903:1984 ISO metric trapezoidal screw threads; tolerances
ONORM M 1504-1974 ISO-metric screw thread; fine series with 0,2 mm and 0,25 mm pitch; nominal dimensions
ONORM M 2012-1983 Tapped holes and screwed plugs with metric pipe thread, fine, for pipe unions, jitüngs and screw plugs; design dimensions

Spanish Association for Standardization (UNE)

UNE 17708:2002 ISO general purpose metric screw threads. Tolerances. Limits of sizes for general purpose external and internal screw threads. Medium quality.
UNE 17709:2002 ISO general purpose metric screw threads. Tolerances. Deviations for constructional screw threads.
UNE 17704:2002 ISO general-purpose metric screw threads. Basic dimensions .
UNE-EN ISO 228-1:2003 Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000)
UNE 17703:2004 ISO general purpose metric screw threads. Selected sizes for screws, bolts and nuts.

Standard Association of Australia （SAA）

AS B53:1939 Pipe threads. Basic sizes and tolerances
AS ISO 7.1:2008 Pipe threads where pressure-tight joints are made on the threads - Dimensions, tolerances and designation

BE-NBN

NBN 650 F-1965 Triangular thread, metric ISO 1.6MM~ 300MM size restrictions and tolerances
NBN 810-1969 Triangular thread taps, metric ISO threaded portion dimensions, ranges and tolerances
NBN E 03-004-1986 Thread processing. Metric Triangular ISO Dimensions, Limits and Tolerances
NBN 811-1969 Triangular thread tap ISO in feet. Threaded Section Dimensions and Tolerances
NBN 820-1970 Tap ISO for joint pipe thread. Threaded Section Dimensions and Tolerances
NBN 410-1957 ISO triangular thread, metric bolt 0.25mm~ 5mm nominal size
NBN 493-1958 Triangular thread ISO bolt industry metric 6mm~ 52mm nominal size

The Directorate General of Specifications and Metrology (DGSM)

OS GSO ISO 965-5:2008 ISO general purpose metric screw threads – Tolerances – Part 5: Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing
OS GSO ISO 965-2:2008 ISO general purpose metric screw threads – Tolerances – Part 2: Limits of sizes for general purpose external and internal screw threads – Medium quality
OS GSO ISO 724:2008 ISO general-purpose metric screw threads – Basic dimensions
OS GSO ISO 262:2008 ISO general-purpose metric screw threads – Selected sizes for screws, bolts and nuts
OS GSO ASTM B302:2009 Standard Specification for Threadless Copper Pipe, Standard Sizes
OS GSO ISO 7-1:2008 Pipe threads where pressure-tight joints are made on the threads - Part 1: Dimensions, tolerances and designation

Korean Agency for Technology and Standards (KATS)

KS B 0219-2008(2018) Limit of sizes tolerances for metric trapezoidal screw threads
KS B 0219-1983 Limit of sizes tolerances for metric trapezoidal screw threads
KS B 0211-1987(2022) Limits of Sizes and Tolerances for Metric Coarse Screw Threads
KS B ISO 228-1:2007 Pipe threads where pressure － tight joints are not made on the threads － Part 1: Dimensions, tolerances and designation
KS B 0214-2017(2022) Limits of sizes and tolerances for metric fine screw threads
KS B 0219-2023 Limit of sizes tolerances for metric trapezoidal screw threads
KS B 0219-2008(2023) Limit of sizes tolerances for metric trapezoidal screw threads
KS B 0214-2022 Limits of sizes and tolerances for metric fine screw threads
KS B 0216-1974 Limits and Tolerances for Unified Fine Screw Threads
KS B 0213-1974 Limits and Tolerances for Unified Coarse Screw Threads
KS B 0211-1987(2017)(英文版) Limits of Sizes and Tolerances for Metric Coarse Screw Threads
KS B 0211-2022 Limits of Sizes and Tolerances for Metric Coarse Screw Threads
KS B 0212-1971 variation of dimensions and tolerances for whitworth coarse screw thread
KS B 0214-2017 Limits of sizes and tolerances for metric fine screw threads
KS B 0215-1971 variation of dimensions and tolerances for whitworth fine screw thread
KS B ISO 7-1-2022 Pipe threads where pressure－tight joints are made on the threads－Dimensions, tolerances and designation
KS B ISO 7-1:2007 Pipe threads where pressure－tight joints are made on the threads－Dimensions, tolerances and designation
KS B ISO 7-1-2007(2017) Pipe threads where pressure－tight joints are made on the threads－Dimensions, tolerances and designation
KS B ISO 7-1-2007(2022) Pipe threads where pressure－tight joints are made on the threads－Dimensions, tolerances and designation
KS B ISO 228-1-2007(2022) Pipe threads where pressure － tight joints are not made on the threads － Part 1: Dimensions, tolerances and designation
KS B 0236-1989 Permissible Deviation in Dimensions without Tolerance Indication of dimensions
KS W 1545-1999 Pipe threads where pressuretight joints are not made on the threads-Part 1:Dimensions, tolerances and designation
KS W 1545-2013 Pipe threads where pressuretight joints are not made on the threads － Part 1: Dimensions, tolerances and designation

CU-NC

NC 06-70-1969 ISO metric screw threads. Tolerances. Limits of sizes for medium quality commercial bolt and nut threads

Japanese Industrial Standards Committee (JISC)

JIS B 0217-2:2013 ISO metric trapezoidal screw threads.Tolerances .Part 2: Limits of sizes for external and internal screw thread
JIS B 0218:1980 Limit of sizes and tolerances for metric trapezoidal screw threads
JIS B 0212:1973 Limits of sizes and tolerances for unified fine screw threads
JIS B 0210:1973 Limits of sizes and tolerances for unified coarse screw threads
JIS B 0209-2:2001 ISO general purpose metric screw threads -- Tolerances -- Part 2: Limits of sizes for general purpose external and internal screw threads -- Medium quality
JIS B 0209-5:2001 ISO general purpose metric screw threads -- Tolerances -- Part 5: Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing
JIS B 0211:1997 Limits of sizes and tolerances for metric fine screw threads
JIS B 0209:1997 Limits of sizes and tolerances for metric coarse screw threads
JIS B 0209-4:2001 ISO general purpose metric screw threads -- Tolerances -- Part 4: Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing
JIS B 0216-3:2013 ISO metric trapezoidal screw threads -- Basic dimensions
JIS B 0209-5 ERRATUM 1:2002 ISO general purpose metric screw threads -- Tolerances -- Part 5: Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing (Erratum 1)

Bureau of Indian Standards

IS 14962-5-2001 ISO General Purpose Metric Screw Threads - Tolerances-5 Limits of Sizes for Internal Screw Threads to Mate with Hot-Dip Galvanized External Screw Threads with Maximum Size of Toleracnce Position h before Galvanizing
IS 14962-2-2001 ISO General Purpose Metric Screw Threads - Tolerances-2 Limits of Sizes for General Purpose External and Internal Screw Threads - Medium Quality
IS 14962-4-2023 ISO General Purpose Metric Screw Threads-Tolerances -Part 4 Limits of Sizes for Hot-Dip Galvanized External Screw Threads to Mate with Internal Screw Threads Tapped with Tolerance Position H or G After Galvanizing
IS 554-1999 Pipe Threads Where Pressure-Tight Joints are Made on the Threads - Dimensions, Tolerances and Designation (Fourth Revision)
IS 6173-1-1992 Screwing Taps - Dimensions and Tolerances on Threaded Portion - Part 1 : For ISO Metric Screw Threads ( First Revision ) (Incorporated Amendement No.1)
IS 14962-3-2022 ISO General Purpose Metric Screw Threads-Tolerances - Part 3 Limit Deviations for Screw Threads
IS 2643-2005 Pipe Threads Where Pressure-Tight Joints are not Made on the Threads - Dimensions, Tolerances and Designation (Third Revision)
IS 6173-2-1992 Screwing Taps - Dimensions and tolerances of threaded portion:Part 2 For pipe threads G, Rp and Rc series
IS 4218-5-1979 ISO Metric screw threads Part V Tolerances

Standards Norway

NS 5580:1983 Pipe threads where pressure-tight joints are made on the threads — Designation, dimensions and tolerances(ISO 7-1:1982)
NS 1877:1983 ISO general purpose metric screw threads - Tolerances - Part 2: Limits of sizes for general purpose bolt and nut threads - Medium quality (ISO 965-2:1980)
NS 1073-3:1970 Metric screw thread — ISO profile — Basic dimensions
NS 5581:1983 Pipe threads where pressure-tight joints are not made on the threads - Designation, dimensions and tolerances (ISO 228-1:1982)
NS 1074-2:1971 Metric screw threads — ISO profile — Limits of sizes for commercial bolts and nut threads
NS 5702:1978 ISO metric trapezoidal screw threads — Tolerances
NS 5580-1983 Pipe threads where pressure-tight joints are made on the threads - Designation, dimensions and tolerances
NS-EN ISO 228-1:2003 Pipe threads where pressure-tight joints are not made on the threads — Part 1: Dimensions, tolerances and designation (ISO 228-1:2000)
NS 1073-5:1971 Metric screw threads — ISOprofile — Basic deviations and tolerances
NS 1073-4:1971 Metric screw threads — ISO profile — Tolerances — Principles
NS 1876:1983 ISO general purpose metric screw threads - Selected sizes for screws, bolts and nuts (ISO 262:1973)
NS 1073-6:1971 Metric threads — Limits of sizes — Coarse and fine threads — ISO profile — Diameters 1 to 300 mm

RO-ASRO

STAS 402-1988 PIPE TIIREADS WIIERE PRESSURE-TIGUT JOINTS ARE MADE ON TUE FHREADS Dimensions and tolerances
STAS 5326-1979 SCREW THREAD FOR CYCLES Nominal prolile and sizes
STAS 8130-1988 PIPE THREADS WHERE PRESSU RE-TIGHT JOINTS ARE NOT MADE ON THE THREADS Dimensions and tolerances

VN-TCVN

TCVN 2253-1977 Metric taper threads.Basic dimension and tolerances
TCVN 4683-5-2008 ISO general purpose metric screw threads.Tolerances.Part 5: Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing
TCVN 2256-1977 Round threads.Profiles.Basic dimensions and tolerances
TCVN 4683-2-2008 ISO general purpose metric screw threads.Tolerances.Part 2: Limits of sizes for general purpose external and internal screw threads.Medium quality
TCVN 2255-2008 ISO metric trapezoidal screw threads.Tolerances
TCVN 4683-4-2008 ISO general purpose metric screw threads.Tolerances.Part 4: Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing

GCC Standardization Organization

BH GSO ISO 965-2:2024 ISO general purpose metric screw threads – Tolerances – Part 2: Limits of sizes for general purpose external and internal screw threads – Medium quality
GSO ISO 965-4:2023 ISO general purpose metric screw threads — Tolerances — Part 4: Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing
BH GSO ISO 7-1:2024 Pipe threads where pressure-tight joints are made on the threads - Part 1: Dimensions, tolerances and designation
GSO ISO 228-1:2008 Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation
GSO ISO 2903:2013 ISO metric trapezoidal screw threads -- Tolerances
BH GSO ISO 228-1:2024 Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation
BH GSO ISO 5864:2024 inch screw threads – Allowances and tolerances
GSO ISO 965-5:2008 ISO general purpose metric screw threads – Tolerances – Part 5: Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing
GSO ISO 965-3:2023 ISO general purpose metric screw threads — Tolerances — Part 3: Limit deviations for screw threads
GSO ISO 2857:2015 Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches -- Manufacturing tolerances on the threaded portion
BH GSO ISO 262:2024 ISO general-purpose metric screw threads – Selected sizes for screws, bolts and nuts
BH GSO ASTM B302:2024 Standard Specification for Threadless Copper Pipe, Standard Sizes
GSO ISO 5864:2008 inch screw threads – Allowances and tolerances

TH-TISI

TIS 339.5-2008 Iso general purpose metric screw threads.tolerances.part 5: limits of sizes for internal screw threads to mate with hot.dip galvanized external screw threads with maximum size of tolerance position h before galvanizing
TIS 2410-2008 Iso inch screw threads.allowances and tolerances
TIS 2361-2007 Iso metric trapezoidal screw threads.tolerances

PL-PKN

PN M02155-1989 Round screw threads Tolerances for gauges
PN L01402-1989 Aerospace screw threads Dimensions and tolerances for bolts, screws and nuts

NL-NEN

NEN 81-1982 ISO Metric screw thread - Coarse pitch - Basic dimensions
NEN 3222-1983 ISO Metric screw thread - Coarse pitch - Tolerances

YU-JUS

JUS M.B0.069-1989 TRAPEZOIDAL THREAD FOR DRILLING ACCESSORIES FOR EXPLORATION DRILLING Measurements and tolerances
JUS M.B0.600-1985 Taps for ISO metric threads. Tolerances on the threadedportion
JUS M.B0.270-1977 ISO Metric trapezoidal screw threads. System of tolerances

TZ-TBS

TZS 171-1983 Tanzania Standard ISO General purpose metric screw threads — Tolerances: Limits of sizes for commercial bolt and nut threads — Medium quality

IN-BIS

IS 6173 Pt.1-1992 Screqing taps. Dimensions and tolerances of threaded portion. Part 1: For ISO metric screw threads (First Revision)
IS 4696 Pt.4-1980 Serrated Thread Dimensions Part IV Tolerance System
IS 2643 Pt.2-1975 Dimensions of pipe threads for fastening Part Ⅱ Tolerances
IS 6173 Pt.2-1992 Thread taps - Dimensions and tolerances of threaded parts of pipe threads series G, Rp and Re Part 2
IS 4218 Pt.5-1979 ISO Metric Threads Part V Tolerances

KP-CSK

KPS 2551-4-2002 ISO general purpose metric screw threads-Tolerances-Part 4:Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO ISO 965-4:2023 ISO general purpose metric screw threads — Tolerances — Part 4: Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing
BH GSO ISO 2903:2016 ISO metric trapezoidal screw threads -- Tolerances
BH GSO ISO 965-3:2023 ISO general purpose metric screw threads — Tolerances — Part 3: Limit deviations for screw threads

Gosstandart of Russia

GOST ISO 965-5-2015 Basic norms of interchangeability. ISO general purpose metric screw threads. Tolerances. Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing
GOST 621-1987 Piston rings for internal combustion engines. General specifications
GOST 7157-1979 Gauges for pine taper thread. Types. Basic dimensions and tolerances
GOST 8867-1989 Gauges for tool joints thread. Types. Basic dimensions and tolerances
GOST 28487-2018 Thread shouldered connections with tool-joint thread of drill string elements. General technical requirements
GOST 13798-1968 Gauges for round screw thread of 12 mm diameters. Basic dimensions and tolerances
GOST 6211-1981 Conical pipe thread. Profile, basic dimensions and tolerances
GOST 28487-1990 Tool-joint tapered thread for drill string elements. Profile. Dimensions. Tolerances
GOST 6485-1969 Gauges for inch taper thread with 60° corner profile. Types. Basic dimensions and tolerances

South African Bureau of Standard

SANS 1700-2-17:1996 Fasteners Part 2: Screw threads Section 17: ISO metric trapezoidal screw threads - Basic dimensions
SANS 1700-2-19:2003 Fasteners Part 2: Screw threads Section 19: ISO general purpose metric screw threads - Tolerances - Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing
SANS 1700-2-20:2003 Fasteners Part 2: Screw threads Section 20: ISO general purpose metric screw threads - Tolerances - Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvaniz

CZ-CSN

CSN 01 4314-1979 Metric Screw Threads ISO. Tolerans System
CSN 25 4012-1973 Limit screw gauges ISO for metric hread. Functional dimensions
CSN 22 3042 Dil.2-1978 Short machine taps for ISO metric threads. Basic dímensions.
CSN 22 3042 Dil.3-1978 Short maehine taps for ISO metric threads. Basic dimensions.
CSN 22 3042-1978 Short machine taps for ISO metric threads. Basic dimensions.

Society of Automotive Engineers (SAE)

SAE MA1567B-2018 Insert, Screw Thread, Helical Coil Metric Series, Standard Assembly Dimensions For
SAE MA1567C-2019 Insert@ Screw Thread@ Helical Coil Metric Series@ Standard Assembly Dimensions for
SAE MA1567B-1996 Insert, Screw Thread, Helical Coil Metric Series, Standard Assembly Dimensions For

IL-SII

S.I.T.D.638-1967 ISO METRIC SCREW THREAD: TOLERANCES AND FITS

Lithuanian Standards Office

LST EN ISO 228-1:2003 Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000)

American National Standards Institute （ANSI)

ANSI H35.2M-2013 Standard Dimensional Tolerances for Aluminum Mill Products
ANSI H35.2-2013 Standard Dimensional Tolerances for Aluminum Mill Products

Others: iso thread standard size tolerance,iso thread standard size tolerance,thread standard tolerance iso