-
GB/T 37462-2019 in English
Locking threads with 30 degree wedge ramp
VALID
Issued on:2019-05-10 | Implemented on:2019-12-01
$370.00 $359.00 -
GB/T 15054.2-2018 in English
Miniature screw threads—Part 2:Tolerances and limits of size
VALID
Issued on:2018-05-14 | Implemented on:2018-10-01
$200.00 $194.00 -
GB/T 15054.1-2018 in English
Miniature screw threads—Part 1:Profiles,general plan and basic dimensions
VALID
Issued on:2018-05-14 | Implemented on:2018-10-01
$140.00 $136.00 -
GB/T 29537-2013 in English
Pipe threads with 80 degree thread angle where pressure-tight joints are not made on the threads
VALID
Issued on:2013-06-09 | Implemented on:2014-03-01
$180.00 $175.00 -
JB/T 10971-2010 in English
Locking threads with 30 degree wedge ramp
VALID
Issued on:2010-02-11 | Implemented on:2010-07-01
$180.00 $175.00 -
GB/T 1415-2008 in English
Metric threads where pressure-tight joints are made on the threads
VALID
Issued on:2008-07-30 | Implemented on:2009-02-01
$140.00 $136.00 -
GB/T 13576.4-2008 in English
Buttress threads with the flank angles of 3 and 30 degrees - Part 4: Tolerances
VALID
Issued on:2008-07-30 | Implemented on:2009-02-01
$300.00 $291.00 -
GB/T 13576.3-2008 in English
Buttress threads with the flank angles of 3 and 30 degrees - Part 3: Basic dimensions
VALID
Issued on:2008-07-30 | Implemented on:2009-02-01
$180.00 $175.00 -
GB/T 13576.2-2008 in English
Buttress threads with the flank angles of 3 and 30 degrees - Part 2: General plan
VALID
Issued on:2008-07-30 | Implemented on:2009-02-01
$120.00 $117.00 -
GB/T 13576.1-2008 in English
Buttress threads with the flank angles of 3 and 30 degrees - Part 1: Profiles
VALID
Issued on:2008-07-30 | Implemented on:2009-02-01
$100.00 $97.00
All Rights Reserved © 2026 WWW.CHINASTANDARDS.NET
