GB/T 13576.3-2008 in English
VALIDButtress threads with the flank angles of 3 and 30 degrees - Part 3: Basic dimensions
- Issued on:2008-07-30
- Implemented on:2009-02-01
- File Format:PDF
- Delivery:Via email within 1~3 business days
$175.00
| Standard No: | GB/T 13576.3-2008 |
| Document status: | VALID |
| Title in English: | Buttress threads with the flank angles of 3 and 30 degrees - Part 3: Basic dimensions |
| Title in Chinese: | 锯齿形(3°、30°)螺纹 第3部分：基本尺寸 |
| Language: | English |
| File Format: | Electronic (PDF) |
| Delivery: | Via email within 1~3 business days |
| Issued on: | 2008-07-30 |
| Implemented on: | 2009-02-01 |
| Superseding: |
GB/T 13576.3-1992 Buttress threads with 3 and 30 degrees
|
| ICS Classification: | 21.040.30-Special screw threads |
| Chinese Classification: | J04-Basic standards and general methods |
| Professional Classification: | GB-National Standard |
| Related Keywords: | basic dimensions scopethis part
basic dimensions buttress threads serrated threads zigzag threads comply |
| Related Topics: | Thread size table
Form thread size table GB/T 13576.3 GB/T 13576.3-1992 GB/T 13576.3-2008 German standard serrated thread |
《GB/T 13576.3-2008锯齿形（3°、30°）螺纹 第3部分：基本尺寸》由TC108（全国螺纹标准化技术委员会）归口，主管部门为国家标准化管理委员会。
GB/T13576的本部分规定了锯齿形螺纹的基本尺寸。锯齿形螺纹的牙型和直径与螺距系列分别符合GB/T13576.1和GB/T13576.2的规定。
本部分适用于一般用途的机械传动和紧固锯齿形螺纹连接。
Scope
This part of GB/T 13576 specifies the basic dimensions of serrated threads. The profile, diameter and pitch series of zigzag threads comply with the provisions of GB/T 13576.1 and GB/T 13576.2 respectively. This section applies to general purpose mechanical transmission and fastening serrated threaded connections.
Loading PDF document...
Error loading PDF. Please make sure the file is valid and try again.
We also recommend
-
GB/T 29537-2013 in English
Pipe threads with 80 degree thread angle where pressure-tight joints are not made on the threads
2013-06-09 -
GB/T 1415-2008 in English
Metric threads where pressure-tight joints are made on the threads
2008-07-30 -
GB/T 7306.1-2000 in English
Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads--Part 1:Parallel internal and taper external threads
2000-07-02 -
GB/T 15054.1-2018 in English
Miniature screw threads—Part 1:Profiles,general plan and basic dimensions
2018-05-14 -
GB/T 37462-2019 in English
Locking threads with 30 degree wedge ramp
2019-05-10
