GB/T 13576.1-2008 in English
VALIDButtress threads with the flank angles of 3 and 30 degrees - Part 1: Profiles
- Issued on:2008-07-30
- Implemented on:2009-02-01
- File Format:PDF
- Delivery:Via email within 1~3 business days
$97.00
| Standard No: | GB/T 13576.1-2008 |
| Document status: | VALID |
| Title in English: | Buttress threads with the flank angles of 3 and 30 degrees - Part 1: Profiles |
| Title in Chinese: | 锯齿形(3°、30°)螺纹 第1部分：牙型 |
| Language: | English |
| File Format: | Electronic (PDF) |
| Delivery: | Via email within 1~3 business days |
| Issued on: | 2008-07-30 |
| Implemented on: | 2009-02-01 |
| Superseding: |
GB/T 13576.1-1992 Buttress threads with 3 and 30 degrese flank flank angle-Profiles
|
| ICS Classification: | 21.040.30-Special screw threads |
| Chinese Classification: | J04-Basic standards and general methods |
| Professional Classification: | GB-National Standard |
| Related Keywords: | profiles scopethis part
buttress threads zigzag threads flank angles threads |
| Related Topics: | tooth side
GB/T 13576.1 GB/T 13576.1-1992 GB/T 13576.1-2008 tooth Serrated Thread Gauge Calibration German standard serrated thread |
《GB/T 13576.1-2008锯齿形（3°、30°）螺纹 第1部分：牙型》由TC108（全国螺纹标准化技术委员会）归口，主管部门为国家标准化管理委员会。
GB/T 13576的本部分规定了锯齿形螺纹的基本牙型和设计牙型。本部分适用于一般用途机械传动和紧固的锯齿形螺纹联接。
Scope
This part of GB/T 13576 specifies the basic profile and design profile of zigzag threads. This section applies to general purpose mechanical transmission and fastening serrated threaded connections.
Loading PDF document...
Error loading PDF. Please make sure the file is valid and try again.
We also recommend
-
GB/T 29537-2013 in English
Pipe threads with 80 degree thread angle where pressure-tight joints are not made on the threads
2013-06-09 -
GB/T 7306.1-2000 in English
Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads--Part 1:Parallel internal and taper external threads
2000-07-02 -
GB/T 37462-2019 in English
Locking threads with 30 degree wedge ramp
2019-05-10 -
GB/T 1415-2008 in English
Metric threads where pressure-tight joints are made on the threads
2008-07-30
