GB/T 13576.4-2008 in English
VALIDButtress threads with the flank angles of 3 and 30 degrees - Part 4: Tolerances
- Issued on:2008-07-30
- Implemented on:2009-02-01
- File Format:PDF
- Delivery:Via email within 5 business days
$291.00
| Standard No: | GB/T 13576.4-2008 |
| Document status: | VALID |
| Title in English: | Buttress threads with the flank angles of 3 and 30 degrees - Part 4: Tolerances |
| Title in Chinese: | 锯齿形(3°、30°)螺纹 第4部分：公差 |
| Language: | English |
| File Format: | Electronic (PDF) |
| Delivery: | Via email within 5 business days |
| Issued on: | 2008-07-30 |
| Implemented on: | 2009-02-01 |
| Superseding: |
GB/T 13576.4-1992 Buttress threads with 3 and 30 degrees flank angle-Tolerances
|
| ICS Classification: | 21.040.30-Special screw threads |
| Chinese Classification: | J04-Basic standards and general methods |
| Professional Classification: | GB-National Standard |
| Related Keywords: | tolerances scopethis part
buttress threads serrated threads zigzag threads comply flank angles |
| Related Topics: | Molecular weight difference 30
Molecular weight difference 30 grade two thread callout GBT13576.4 GB/T 13576.4-1992 GB/T 13576.4-2008 Serrated Thread Gauge Calibration German standard serrated thread |
《GB/T 13576.4-2008锯齿形（3°、30°）螺纹 第4部分：公差》由TC108（全国螺纹标准化技术委员会）归口，主管部门为国家标准化管理委员会。
GB/T13576的本部分规定了锯齿形螺纹的公差和标记。锯齿形螺纹的牙型和直径与螺距系列分别符合GB/T13576.1和GB/T13576.2的规定。
本部分适用于一般用途机械传动和紧固的锯齿形螺纹连接。
Scope
This Part of GB/T 13576 specifies the tolerances and markings for serrated threads. The profile, diameter and pitch series of zigzag threads comply with the provisions of GB/T 13576.1 and GB/T 13576.2 respectively. This section applies to general purpose mechanical transmission and serrated thread connections.
Loading PDF document...
Error loading PDF. Please make sure the file is valid and try again.
We also recommend
-
GB/T 29537-2013 in English
Pipe threads with 80 degree thread angle where pressure-tight joints are not made on the threads
2013-06-09 -
GB/T 7306.1-2000 in English
Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads--Part 1:Parallel internal and taper external threads
2000-07-02 -
GB/T 37462-2019 in English
Locking threads with 30 degree wedge ramp
2019-05-10
