Preparation method of electron microscope fixative

Preparation method of electron microscope fixative, Total:215 items.

The international standard classification for "Preparation method of electron microscope fixative" includes: Aerospace fluid systems and components , Metallic coatings , Motion picture equipment , Other equipment for petroleum and natural gas industries , Extraction and processing of petroleum and natural gas , Filters, seals and contamination of fluids , Coals , Other standards related to analytical chemistry , Electronic components in general , Laboratory medicine , Fixed resistors , Analytical chemistry in general , Control components , Rubber and plastics products in general .

The Chinese standard classification for "Preparation method of electron microscope fixative" includes: Aerospace hydraulic elements and accessories , Basic standards and general methods , Material Protection , Lens , Electron optics and other physical optics instrument , Material composition analysis instrument and environment detection instrument in general , Gas turbine and its auxiliary equipment , Petroleum products in general , Petroleum drilling , Petroleum extraction , Hydraulic and pneumatic device , Coal petrography , Electrochemical, thermochemistry and optical profile type analyzer , Capacitor , Resistor , Plant quarantine, pest control , Carbon black , Analysis methods for exhaust emission pollutants .

Professional Standard - Railway

TB/T 1145-1975 Solution preparation and calibration method (only for domestic issue)

Professional Standard - Aerospace

QJ 2724.4-1995 Microscopic Particle Counting Method for Determination of Solid Particle Contamination of Working Fluids in Aerospace Hydraulic Pollution Control
QJ 2724.6-1995 Gravimetric method for determination of solid pollution of working fluid in aerospace hydraulic pollution control
QJ 2724.1-1995 Aerospace Hydraulic Pollution Control - Coding Method for Pollution Grade of Solid Particle in Working Liquid

Professional Standard - Automobile

QC/T 29105.4-1992 Test method for degree of solid pollution on hydraulic oil for hydraulic system of special automobile - Microscope particle counting method

Professional Standard - Construction Industry

JG/T 70-1999 Microscope count method for solid particle filth in oil liquid

Group Standards of the People's Republic of China

T/QGCML 4131-2024 Optical lens preparation method
T/CSTM 00162-2020 Calibration methods for transmission electron microscope
T/SNEIA 8-2024 Determination method of electrolyte for zinc-iron flow battery
T/NLIA 004-2021 In-situ SEM tensile test method for additive manufactured aluminum alloy

Military Standard of the People's Republic of China-General Armament Department

GJB 380.5-1987 Aircraft hydraulic system contamination test using microscope counting method to determine oil solid particle contamination degree
GJB 772.102-1989 Test methods for explosives Particle size determination microscopy
GJB 8684.22-2015 Test methods for pyrotechnic properties - Part 22: Determination of smoke solid particle number concentration by electron microscopy
GJB 737.11-1993 Test methods for pyrotechnic chemicals Particle size determination Scanning electron microscopy
GJB 380.8-1998 Contamination test of aircraft hydraulic system using microscope comparison method to determine the solid contamination degree of working fluid
GJB 380.8A-2015 Aviation working fluid contamination test Part 8: Determination of solid particle contamination by microscopic contrast method
GJB 8684.23-2015 Test methods for pyrotechnic properties - Part 23: Determination of particle size distribution of smoke solid particles by electron microscopy
GJB 380.5A-2015 Aviation working fluid contamination test Part 5: Determination of solid particle contamination by microscopic counting method

Professional Standard - Aviation

HB 5931.5-1986 Determination of solid particle pollution degree of working fluid by microscopic counting method for pollution test of aircraft hydraulic system
HB 5931.8-1989 Contamination Test of Aircraft Hydraulic System - Determination of Solid Pollution Degree of Working Fluid by Microscope Contrast Method
HB/Z 5099.3-2000 Analysis Method for Electrosilvering Solution - Determination of Potassii Content in Electrosilvering Solution Through Potentiometric Titration
HB/Z 5099.1-2000 Analysis Method for Electrosilvering Solution Determination of Silver Content in Electrosilvering Solution Through Potentiometric Titration

Professional Standard - Machinery

JB/T 6842-1993 Test Method of Scanning Electron Microscope
JB/T 8278-1999 Test solutions of electric conductivity analyzers preparation method of sodium chloride solutions
JB/T 9591.3-1999 Gas Turbine - Oil System Cleanliness Testing - Determination of Solid Particle Pollution Degree in Oil Liquid by Microscope Count Method
JB/T 9426.6-2011 Lenses for motion picture camera —Part 6: Method for determining various functions of lenses for motion picture camera
JB/T 9591.3-2015 Gas turbine-Cleanliness verinng for oil system 一Measuring particulate containant in oil by microscopic counting method
JB/T 9352-1999 Test method for the transmission electron microscope
JB/T 9409-2010 Method for determining various functions of motion-picture projection lenses

Professional Standard - Petrochemical Industry

SH/T 0079-1991 Preparation method for petroleum products reagent solution for testing

Professional Standard - Petroleum

SY/T 5614-1993 Rock Fluorescence Microscopy Identification Method
SY 6677-2007 Calibration Method of Drilling Fluid Solid Phase Quantity Meter
SY/T 5834-1993 Measurement method and evaluation index of low solids killing fluid performance
SY/T 6677-2007 Calibration method of mnd retort assembly
SY/T 5834-2007 Performance specifications and measuring methods of low-solid killing fluid

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 15623.2-2003 Hydraulic fluid power - Electrically modulated hydraulic control valves - Part 2: Test methods for three-way directional flow control valves
GB/T 3295-1996 Standrd test method for 45°specular gloss of ceramic ware
GB/T 27501-2011 Preparation method of buffer solutions for the measurement of pH value
GB/T 25189-2010 Microbeam analysis—Determination method for quantitative analysis parameters of SEM-EDS
GB/T 6948-2008 Method of determining microscopically the reflectance of vitrinite in coal
GB/T 15623.3-2022 Hydraulic fluid power—Electrically modulated hydraulic control valves—Part 3: Test methods for pressure control valves
GB/T 21637-2008 Method of morphological identification of coronavirus by using transmission electron microscopy
GB/T 6948-1998 Microscopical determination of the reflectance of vitrinite in coal
GB/T 27503-2011 Test solutions of electrolytic conductivity analyzer - Preparation method of sodium chloride solutions
GB/T 2470-1995 Type designation system for fixed resistors and fixed capacitors for use in electronic equipment
GB/T 7016-1986 Method of measurement of current noise generated in fixed resistors
GB/T 17484-1998 Hydraulic fluid power - Fluid sample containers - Qualifying and controlling cleaning methods
GB 7016-1986 Method of measurement of current noise generated in fixed resistors
GB/T 20082-2006 Hydralic fluid power-Fluid contamination - Determination of particulate contamination by the counting method using an optical microscope
GB/T 15623.1-2003 Hydraulic fluid power—Electrically modulated hydraulic control valves—Part 1:Test methods for four-way directional flow control valves
GB/T 17362-2008 Analysis method for gold products with X-ray EDS in SEM

国家能源局

SY/T 6677-2022 Calibration method of drilling fuid retort assembly

Taiwan Provincial Standard of the People's Republic of China

CNS 11994-1987 Cable Clamping Devices for Motor Starters and Controllers in Ships

Professional Standard - Commodity Inspection

SN/T 3009-2011 Identification of Seawater Corrosion on Metallic Surface by SEM
SN/T 4388-2015 Leather identification―Scanning electron microscopy and optical microscopy
SN/T 2879-2011 Determination of Fat Solubility of Solid and Liquid Substances
SN/T 1840-2006 Method for detection of plant viruses by immuno-electron microscopy

Professional Standard - Chemical Industry

HG 20635-1997（编制说明） Steel pipe flanges, gaskets, fasteners optional regulations (American system)
HG/T 2299-2001 Determination of total solid content of aqueous dispersion - Rubber compounding material
HG 20635-1997 Steel pipe flanges, gaskets, fasteners optional regulations (American system)
HG/T 20614-2009 Specification for Selection of Steel Pipe Flanges, Gaskets and Bolting (PN designated)
HG/T 3500-1982 Method for Determination of Polarity Constant of Chemical Reagent Gas Chromatography Stationary Liquid
HG/T 20635-2009 Specification for Selection of Steel Pipe Flanges, Gaskets and Bolting (Class designated)
HG 20614-1997（编制说明） Steel pipe flanges, gaskets, fasteners optional regulations (European system)
HG 20614-1997 Steel pipe flanges, gaskets, fasteners optional regulations (European system)

Professional Standard - Environmental Protection

HJ/T 41-1999 Stationary source emission -- Determination of asbestos dust -- Microscopic count

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence

GJB 5384.22-2005 Test methods of performance for pyrotechnic composition Part 21: Concentration determination of solid smoke particles quantities Electron microscope method
GJB 380.5A-2004 Contamination test method of operating liquid for aviation Part 5:Determination of solid particle contamination level by counting method using a microscope
GJB 5384.23-2005 Test methods of performance for pyrotechnic composition Part 23: Determination of particles size distribution for solid smoke particles Electron microscope method
GJB 380.8A-2004 Contamination test method of operating fluid for aviation Part 8:Determination of solid particle contamination level by compare method using a microscope

工业和信息化部

YS/T 1491-2021 Method for determination of sphericity of nickel-based high-temperature alloy powder by scanning electron microscopy

Professional Standard - Education

JY/T 011-1996 General rules for transmission electron microscopy

Professional Standard - Electron

SJ/Z 1173-1977 Methods for determination of current efficiency of electroplating solution

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 15623.2-2017 Hydraulic fluid power-Electrically modulated hydraulic control valves-Part 2:Test methods for three-port directional flow-control valves
GB/T 15623.1-2018 Hydraulic fluid power—Electrically modulated hydraulic control valves—Part 1:Test methods for four-port directional flow-control valves

Professional Standard - Agriculture

HJ 1287-2023 Determination of Blackness of Exhaust Gas from Stationary Pollution Sources by Ringelmann Telescope Method

British Standards Institution (BSI)

BS 2738-3:2004 Spectacle lenses - Specification for the presentation of prescriptions and prescription orders for ophthalmic lenses
BS 3762-4.1:1989(2011) Analysis of formulated detergents — Part 4 : Physical test methods — Section 4.1 Method for determination of clear point of liquid detergents
BS 3762-4.1:1989 Analysis of formulated detergents - Physical test methods - Method for determination of clear point of liquid detergents
BS 3762 Sec.4.1:1989 Analysis of formulated detergents. Physical test methods. Method for determination of clear point of liquid detergents
BS EN IEC 62932-2-1:2020 Flow battery energy systems for stationary applications - Performance general requirements and test methods
BS ISO 13317-2:2001 Determination of particle size distribution by gravitational liquid sedimentation methods - Fixed pipette method
BS EN 60195:2016 Method of measurement of current noise generated in fixed resistors
BS 4119:1967 Method of measurement of current noise generated in fixed resistors
BS ISO 20637:2015 Infant formula and adult nutritionals. Determination of myoinositol by liquid chromatography and pulsed amperometry
BS 3762-3.13:1983 Analysis of formulated detergents. Quantitative test methods. Method for determination of total boron content
BS ISO 10770-1:2009 Hydraulic fluid power - Electrically modulated hydraulic control valves - Test methods for four-port directional flow-control valves
24/30474499 DC BS ISO 19214 Microbeam analysis. Analytical electron microscopy. Method of determination for apparent growth direction of wirelike crystals by transmission electron microscopy
BS ISO 20638:2015 Infant formula. Determination of nucleotides by liquid chromatography

AENOR

UNE 32301:1995 SOLID MINERAL FUELS. PETROGRAPHIC ANALYSIS METHODS. METHOD FOR DETERMINING MICROSCOPICALLY THE REFLECTANCE OF VITRINITE.

SCC

AENOR UNE 20559-1:1970 Fixed tantalum capacitors, with liquid or solid electrolyte. Definitions and test methods
NS-EN 12951:2004 Prefabricated accessories for roofing — Permanently fixed roof ladders — Product specification and test methods
DANSK DS/EN 12951:2005 Prefabricated accessories for roofing - Permanently fixed roof ladders - Product specification and test methods
BS 6697:1986 Methods of test for electrohydraulic proportional control valves
BS 5540-8:1991 Evaluating particulate contamination of hydraulic fluids-Method of determining the level of contamination (by the counting method using a microscope)
CEI EN IEC 63172:2020 Electrical accessories - Methodology for determining the energy efficiency class of electrical accessories
DANSK DS/EN IEC 63172:2020 Electrical accessories – Methodology for determining the energy efficiency class of electrical accessories
AS 2300.2.5:1985 Methods of chemical and physical testing for the dairying industry, Method 2.5: Liquid milks - Determination of the freezing point of milk - Thermistor method
BS 833:1939 Radio interference suppresion for automobiles and stationary internal combustion engines (limits and methods of suppresion)
AS 1766.3.10:1991 Food microbiology, Method 3.10: Examination of specific products - Liquid milks - Direct microscopic count
BS 3406-4:1963 Methods for determination of particle size distribution-Optical microscope method
IEC 60361:1971 Fixed tantalum capacitors with liquid or solid electrolyte
BS ISO 10770-2:1998 Hydraulic fluid power. Electrically modulated hydraulic control valves-Test methods for three-way directional flow control valves
BS 6201-3:1982 Fixed capacitors for use in electronic equipment-Specification for fixed capacitors for radio interference suppression. Selection of methods of test and general requirements
VDI 3861 BLATT 2-2008 Measuring emissions — Measuring inorganic fibrous particles in flowing clean gas — Scanning electron microscopic method
AS 1352.1:1977 Fixed resistors - Terminology and methods of test

IEEE - The Institute of Electrical and Electronics Engineers@ Inc.

IEEE 1578-2018 Recommended Practice for Stationary Battery Electrolyte Spill Containment and Management
IEEE 1578-2007 Recommended Practice for Stationary Battery Electrolyte Spill Containment and Management
IEEE P1578/D2-2018 Recommended Practice for Stationary Battery Electrolyte Spill Containment and Management
IEEE P1578/D3-2018 Draft Recommended Practice for Stationary Battery Electrolyte Spill Containment and Management

Military Standards (MIL-STD)

DOD A-A-54190-1990 HOLDER, BLOOD COLLECTING-DISPENSING BAG

Institute of Electrical and Electronics Engineers (IEEE)

IEEE Std 1578-2018 IEEE Recommended Practice for Stationary Battery Electrolyte Spill Containment and Management
IEEE Std 1578-2007 IEEE Recommended Practice for Stationary Battery Electrolyte Spill Containment and Management
IEEE P1578/D2, January 2018 IEEE Draft Recommended Practice for Stationary Battery Electrolyte Spill Containment and Management
IEEE Std P1578/D15 IEEE Draft Recommended Practice for Stationary Battery Electrolyte Spill Containment and Management
IEEE P1578/D2, June 2017 IEEE Draft Recommended Practice for Stationary Battery Electrolyte Spill Containment and Management
IEEE P1578/D3, June 2018 IEEE Approved Draft Recommended Practice for Stationary Battery Electrolyte Spill Containment and Management
IEEE Unapproved Std P1578/D17, Mar 2007 Unapproved IEEE Draft Recommended Practice for Stationary Batteryelectrolyte Spill Containment and Management
IEEE Unapproved Draft Std P1578/D17, Mar 2007 Unapproved IEEE Draft Recommended Practice for Stationary Battery Electrolyte Spill Containment and Management

Korean Agency for Technology and Standards (KATS)

KS I 4036-2019 Test methods of remanufactured electric side view mirror for passenger cars
KS B 6513-1991(2016) Test Methods for Electro-hydraulic Proportional Directional Bypass Flow Control Va1ves
KS G ISO 11497:2004 Telemark skis and bindings－Binding mounting area－Requirements and test methods
KS A ISO 13317-2:2004 Determination of particle size distribution by gravitational liquid sedimentation methods-Part 2:Fixed pipette method
KS A ISO 13317-2:2014 Determination of particle size distribution by gravitational liquid sedimentation methods — Part 2: Fixed pipette method
KS B 6511-1991(2011) Test Methods for Electro-Hydraulic Proportional Directional Series Flow Control Valves
KS B 6513-1991(2021) Test Methods for Electro-hydraulic Proportional Directional Bypass Flow Control Va1ves
KS B ISO 10770-1-2003(2008) Hydraulic fluid power－Electrically modulated hydraulic control valves－Part 1：Test methods for four-way directional flow control valves
KS B 5421-1981 Method for determining various functions of projection lenses
KS B ISO 3722:2017 Hydraulic fluid power－Fluid sample containers－Qualifying and controlling cleaning methods
KS C 6035-2003(2018) Test method for fixed capacitors for electronic devices
KS C 5103-1977 Testing method for FIXED TANTALUM ELECTOLYTIC capacitors
KS B 6516-1991(2021) TEST METHODS FOR ELECTRONICALLY CONTROLLED OIL HYDRAULIC PUMPS
KS B 5420-2021 Method for determining resolving power of Photographic lenses
KS C 6035-1989 Test method for fixed capacitors for electronic devices
KS B 5408-2013 PHOTOGRAPHIC LENSES ― MEASUREMENT FOR FOCAL LENGTH
KS B 5420-1981(2021) Method for determining resolving power of Photographic lenses
KS B 5420-1981(2016) Method for determining resolving power of Photographic lenses
KS B ISO 10770-2-2002(2012) Electrically modulated hydraulic control valves－Part 2：Test methods for three-way directional flow control valves
KS C 6429-2001 TEST METHODS OF FIXED RESISTORS FOR ELECTRONIC EQUIPMENT

American Society for Testing and Materials (ASTM)

ASTM D4334-05(2010) Standard Test Method for the Determination of the Dip Tube Retention of a Mechanical Pump Dispenser
ASTM D2780-92(2007) Standard Test Method for Solubility of Fixed Gases in Liquids
ASTM D2798-11a Standard Test Method for Microscopical Determination of the Vitrinite Reflectance of Coal
ASTM D2780-92(2002)e1 Standard Test Method for Solubility of Fixed Gases in Liquids
ASTM D4359-90(2006) Standard Test Method for Determining Whether a Material Is a Liquid or a Solid
ASTM D5232-92(1997) Standard Test Method for Determining the Stability and Miscibility of a Solid, Semi-Solid, or Liquid Waste Material
ASTM D5232-92(2008) Standard Test Method for Determining the Stability and Miscibility of a Solid, Semi-Solid, or Liquid Waste Material
ASTM D3429-93(2007) Standard Test Method for Solubility of Fixed Gases in Low-Boiling Liquids
ASTM D4359-90(2019) Standard Test Method for Determining Whether a Material Is a Liquid or a Solid
ASTM D4359-90(2024) Standard Test Method for Determining Whether a Material Is a Liquid or a Solid
ASTM D3429-93(2002)e1 Standard Test Method for Solubility of Fixed Gases in Low-Boiling Liquids
ASTM D2780-92(1997) Standard Test Method for Solubility of Fixed Gases in Liquids
ASTM D4359-90(2000)e1 Standard Test Method for Determining Whether a Material Is a Liquid or a Solid
ASTM D7579-09 Standard Test Method for Pyrolysis Solids Content in Pyrolysis Liquids by Filtration of Solids in Methanol
ASTM D3429-93(2012) Standard Test Method for Solubility of Fixed Gases in Low-Boiling Liquids
ASTM D757-77 Standard test method for determination of pyrolysis solids content in pyrolysis liquids by methanol solids filtration method
ASTM D5232-13 Standard Test Method for Determining the Stability and Miscibility of a Solid, Semi-Solid, or Liquid Waste Material

German Institute for Standardization

DIN 13090-4:1986-12 Conical fittings for medical equipment; lock fittings for resectoscopes
DIN 40740:1991-04 Lead-acid traction batteries; stationary batteries, accessories; ceramic-funnel-plug, ceramic-plug, electrolyt-level-indicator
DIN EN 12951 Berichtigung 1:2007-05 Prefabricated accessories for roofing - Permanently fixed roof ladders - Product specification and test methods; German version EN 12951:2004, Corrigenda to DIN EN 12951:2005-02
DIN EN 12951:2005-02 Prefabricated accessories for roofing - Permanently fixed roof ladders - Product specification and test methods; German version EN 12951:2004
DIN 58763:1997 Production in optical engineering - Transport tray for spectacle lens production in Rx workshops

CZ-CSN

CSN 57 0104 Cast.3-1984 Methods for testing of milk and liquid milk products. Determination of dry matter
CSN 57 0105 Cast.3-1978 Methods for testing of ilk and liquid mllk roducts. Determination f total solids content.
CSN 35 8053-1983 Fixed resistors. Method of determination of voltage coefficient of resistance
CSN 35 8234 Cast.9-1988 Fixed capacitors. Methods of determination of temperature dependence of capacitance
CSN 03 8517-1975 Chemical methods for controlling of plating baths. Zinc plating bath
CSN 03 8520-1984 Chemical Metho?s for Controlling of Plating Baths. Gold Plating Bath
CSN 35 8234 Cast.11-1988 Fixed capacitors. Method of charge and discharge test
CSN 35 8234 Cast.10-1988 Fixed capacitors. Impedance measurement method

International Organization for Standardization (ISO)

ISO 4407:2002 Hydraulic fluid power - Fluid contamination - Determination of particulate contamination by the counting method using an optical microscope
ISO 20638:2015 Infant formula — Determination of nucleotides by liquid chromatography
ISO 11497:1998 Telemark skis and bindings - Binding mounting area - Requirements and test methods
ISO 4407:1991 Hydraulic fluid power; fluid contamination; determination of particulate contamination by the counting method using a microscope
ISO/CD 19214:2023 Microbeam analysis — Analytical electron microscopy — Method of determination for apparent growth direction of wirelike crystals by transmission electron microscopy
ISO 20637:2015 Infant formula and adult nutritionals — Determination of myo-inositol by liquid chromatography and pulsed amperometry

GM Daewoo

GMKOREA EDS-T-7781-2011 Method for measuring the pH value of brake fluid
GMKOREA EDS-T-7703-2011 Test Method for Determining Stroking Property of Brake Fluid
GMKOREA EDS-T-7788-2011 Test method for determining low temperature resistance of brake fluids

GSO

BH GSO EN 12951:2023 Prefabricated accessories for roofing - Permanently fixed roof ladders - Product specification and test methods
GSO EN 12951:2022 Prefabricated accessories for roofing - Permanently fixed roof ladders - Product specification and test methods
BH GSO ISO 20638:2022 Infant formula — Determination of nucleotides by liquid chromatography
GSO ISO 20638:2021 Infant formula — Determination of nucleotides by liquid chromatography
GSO IEC 63172:2024 Electrical accessories - Methodology for determining the energy efficiency class of electrical accessories
GSO ISO 20637:2021 Infant formula and adult nutritionals — Determination of myo-inositol by liquid chromatography and pulsed amperometry
BH GSO ISO 20637:2022 Infant formula and adult nutritionals — Determination of myo-inositol by liquid chromatography and pulsed amperometry
OS GSO 1045:2000 METHOD OF PREPARATION OF REAGENT SOLUTIONS OF QUANTITATIVE ANALYSIS

Association Francaise de Normalisation

NF L41-102:1982 Pollution of hydraulic circuits by solid particles - Control method.
NF M88-707:1991 Equipment for the distribution of liquefied hydrocarbons. Fixed steel tanks for the storage of liquefied petroleum gases, with an internal volume above 11 cubic meters to 120 cubic meters exclusive. Construction and tests.
NF EN 12951:2005 Prefabricated Roofing Accessories - Permanently Attached Roofer's Ladders - Product Specifications and Test Methods
NF E48-660:1991 Hydraulic fluid systems. Fluids. Determination of solid particulate contamination by optical microscope and image analysis.
NF E48-440-1*NF ISO 10770-1:2009 Hydraulic fluid power - Electrically modulated hydraulic control valves - Part 1 : test methods for four-port directional flow-control valves
NF ISO 20638:2016 Infant formulas - Determination of nucleotide content by liquid chromatography
NF V03-188*NF ISO 20638:2016 Infant formula - Determination of nucleotides by liquid chromatography
NF E48-440-1:1999 Hydraulic fluid power. Electrically modulated hydraulic control valves. Part 1 : test methods for four-way directional flow control valves.

RU-GOST R

GOST 24604-1981 Lenses for cameras. Method of determination of transmission coefficient
GOST 32949-2014 Automobile roads of general use. Supports stationary electric lighting. Control methods
GOST R 55659-2013 Methods for the petrographic analysis of coals. Part 5. Method of determining microscopically the reflectance of vitrinite
GOST 25502-1982 Objective lenses. Method for determining the photographic resolving power
GOST 33977-2016 Fruit and vegetable products. Methods for determination of total solids content

JP-JEITA

JEITA CP-5205A-2007 Methods of Measurement on Cable Distribution Equipment for Home Use

ES-UNE

UNE-EN IEC 63172:2021 Electrical accessories - Methodology for determining the energy efficiency class of electrical accessories

Japanese Industrial Standards Committee (JISC)

JIS B 8657:2002 Test methods for electro-hydraulic proportional directional bypass flow control valves
JIS B 8657:1989 Test methods for electro-hydraulic proportional directional bypass flow control valves
JIS B 8655:1989 Test methods for electro-hydraulic proportional directional series flow control valves
JIS B 8655:2002 Test methods for electro-hydraulic proportional directional series flow control valves
JIS B 9930:2000 Hydraulic fluid power -- Fluid contamination -- Determination of particulate contamination by the counting method using a microscope

SE-SIS

SIS SS IEC 361:1981 Fixed tantalum capacitors with liquid or solid electrolyte

CO-ICONTEC

ICONTEC 3224-1991 Electronics. Methods of measurement of specific thermal energy of liquids and solids

KR-KS

KS B ISO 3722-2017 Hydraulic fluid power－Fluid sample containers－Qualifying and controlling cleaning methods

U.S. Military Regulations and Norms

ARMY A-A-52477-1994 CABLE AND CONDUIT ASSEMBLY, PARKING BRAKE-LOOP TYPE, EYE END FITTING (METRIC)
ARMY A-A-52477 VALID NOTICE 1-2004 CABLE AND CONDUIT ASSEMBLY, PARKING BRAKE-LOOP TYPE, EYE END FITTING (METRIC)

RO-ASRO

STAS 7947/12-1988 CALCINATED ALUMINIUM OXIDE Sample disintegration methods and preparation of solution for analysis

Malaysia Standards

MS 1453-1999 Methods of analysis for liquid ironbased coagulants

Standard Association of Australia （SAA）

AS 1766.3.10:1994 Food microbiology Method 3.10:Examination for specific products - Liquid milks - Direct microscopic count

Society of Automotive Engineers (SAE)

SAE AGS2099-1-1959 AGS2099 Method of Assembling Safety Guard and Securing Ring on N.R.V.

Others: