Strengthen insulation and withstand voltage testing

Strengthen insulation and withstand voltage testing, Total:297 items.

The international standard classification for "Strengthen insulation and withstand voltage testing" includes: Electrical accessories in general , Insulating materials in general , Insulating gases , Other insulating materials , Transformers. Reactors , Power stations in general , Aerospace electric equipment and systems .

The Chinese standard classification for "Strengthen insulation and withstand voltage testing" includes: Electric rotating machinery in general , Electrical insulating material and its products , Basic standards and general methods for adhesives , Transformer , Electric power testing technique , Basic standards and general methods , Technical management , Signal equipment , Electrical system and equipment .

Professional Standard - Machinery

JB/T 7616-1994 Steep current impulse resistance test for insulator of high-tension lines
JB/T 7082-1993 Dielectric Withstand Testing Instruments for Insulating Medium
JB/T 9588.2-1999 Test method for ceramic insulators of spark plug.Test method for voltage proof
JB/T 7082-2013 Dielectric voltage-withstand tester
JB/T 6204-2002 Specifications for Withstanding Voltage Test Oil Stator Coil and

Taiwan Provincial Standard of the People's Republic of China

CNS 14256-1998 Method of test for withstand voltage of personal protective equipment and insulation devices
CNS 6040-1980 Method of Test for Electric Strength of Solid Insulating Materials
CNS 3988-2000 Dielectric Properties of Control Device
CNS 9808-1983 Method of Test for Control Gear Insulation
CNS 8785-1988 Method of Test for Electric Strength of Heat Shrinkable Tubing for Electrical Insulation

Professional Standard - Aerospace

QJ 2220.3-1992 Coating electrical insulation performance test method Measurement method of breakdown voltage, breakdown strength and withstand voltage under power frequency
QJ 1990.4-1990 Electrical performance test methods of electrical insulating adhesives breakdown voltage and breakdown strength under power frequency

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 1408.2-2006 Electrical strength of insulating materials - Test methods - Part 2: Additional requirements for tests using direct voltage
GB/T 27749-2011 Test procedure for thermal endurance of insulating varnishes - Electric strength method
GB/T 14517-1993 Test method for dielectric strength of insulating adhesive tape at power frequency
GB/T 1408.2-2016 Electrical strength of insulating materials - Test methods - Part 2: Additional requirements for tests using direct voltage
GB/T 10237-1988 Power transformers-Insulation levels and dielectric tests external clearances in air

Inner Mongolia Provincial Standard of the People's Republic of China

DB15/T 1388-2018 Rated voltage 1kV, 10kV steel wire reinforced core overhead insulated cables

Professional Standard - Electricity

DL 429.9-1991 Dielectric oil dielectric strength test method
DL/T 555-2004 Guide for withstand voltage and insulated test of gas-insulated metal-enclosure switchgear on site
DL/T 1694.4-2017 Calibration specification for high voltage testing instruments. Part 4: Insulation oil voltage withstanding tester
DL/T 846.7-2016 General technical specifications for high voltage test equipment - Part 7: Dielectric strength detector of insulating oils
DL/T 474.4-2018 Guide for insulation test on site AC voltage withstanding test
DL/T 846.7-2016(英文版) General technical conditions for high voltage testing equipment Part 7: Insulating oil dielectric strength tester
DL 474.4-1992 Guidelines for Implementation of On-Site Insulation Tests AC Withstand Voltage Test
DL/T 846.7-2004 General technical specifications for high voltage test equipments Part 7: Dielectric strength detector of insulating oils
DL/T 474.4-2006 Guide for insulation test on site AC voltage withstanding test
DL/T 555-1994 Guide for Withstand Voltage Test of Gas-Insulated Metal-Enclosure Electric Appliance on Site

Group Standards of the People's Republic of China

T/HEBQIA 263-2024 Overhead insulated cables with steel wire reinforcements with rated voltage of 1kV and below
T/EAMA 12-2023 Steel core reinforced aluminum core overhead insulated cables with rated voltage 20 kV and below
T/GDAQI 57-2021 Rated voltage 300/500V high temperature resistant high strength flame retardant silicone rubber insulated flexible cable
T/HEBQIA 264-2024 Overhead insulated cables with steel wire reinforcement with rated voltage of 10kV and below

Yunnan Provincial Standard of the People's Republic of China

DB53/T 496-2013 Technical Requirements for Insulation Reinforcing Parts for High Voltage Switchgear in Plateau Area

Professional Standard - Electron

SJ 2215.14-1982 Method of measurement for input-to-output isolation voltage of semiconductor photocouplers

Professional Standard - Automobile

QC/T 433-1999 Test method for ceramic insulators of spark plugs - Test method for pressure resistance

Professional Standard - Railway

TB/T 1448-1982 Insulation and Voltage Resistance for Communication Signal Products

机械工业部

JB 6204-1992 Specifications for stator insulation withstand voltage test of large high-voltage AC motors

National Metrological Technical Specifications of the People's Republic of China

JJF(机械)1062-2021 Calibration specifications for insulating oil dielectric strength tester
JJF(机械) 1062-2021 Calibration specification for insulating oil dielectric strength tester

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 35856-2018 Methods of insulation resistance test and resistant high voltage test for aircraft electrical equipment

未注明发布机构

IEEE Std 82-2002(R2009) IEEE Test Procedure for Impulse Voltage Tests on Insulated Conductors
CAN/ULC-S129-15 STANDARD METHOD OF TEST FOR SMOULDER RESISTANCE OF INSULATION (BASKET METHOD)

国家铁路局

TB/T 1448-2018 Isolation voltage of railway communication & signal product

SE-SIS

SIS SS 404 03 21-1986 Insulating oils - Method for determination of the electric strength of insulating oils
SIS SS 404 09 24-1992 Solid insulating materials - Methods of test for electric strength of solid insulating materials
SIS SS IEC 506:1982 Insulators — High-voltage insulators — Switching impulse tests
SIS SS IEC 370:1982 Test procedure for thermal endurance of insulating varnishes - Electric strength method
SIS SEN 04 03 07-1971 Insulating oils. Method for determination of electric strength
SIS SS IEC 897:1988 Insulating liquids — Methods for the determination of the lightning impulse breakdown voltage of insulating liquids
SIS SS IEC 666:1986 Insulating oils - Detection and determination of specified anti-oxidant additives in insulating oils

British Standards Institution (BSI)

BS EN ISO 8895:2006 Shaped insulating refractory products - Determination of cold crushing strength
BS 7831:1995 Test procedure for thermal endurance of insulating varnishes - Electric strength method
BS ISO 13821:2020 Corrugated fibreboard. Determination of edgewise crush resistance. Waxed edge method
BS EN ISO 3037:2022 Corrugated fibreboard. Determination of edgewise crush resistance (non-waxed edge method)
BS EN 60243-2:2014 Electric strength of insulating materials. Test methods. Additional requirements for tests using direct voltage
BS EN 1094-5:1995 Insulating refractory products - Determination of cold crushing strength
22/30408894 DC BS EN ISO 3037. Corrugated fibreboard. Determination of edgewise crush resistance (non-waxed edge method)
BS EN 61621:1997 Dry, solid insulating materials. Resistance test to high-voltage, low-current arc discharges
BS EN 60243-2:2001 Methods of test for electric strength of solid insulating materials - Additional requirements for tests using direct voltage
BS EN 60216-2:2005 Electrical insulating materials. Thermal endurance properties. Determination of thermal endurance properties of electrical insulating materials. Choice of test criteria
BS 6470:1984 Method for determination of water in insulating oils, and in oil-impregnated paper and pressboard
BS EN 60216-5:2008 Electrical insulating materials - Thermal endurance properties - Part 5: Determination of relative thermal endurance index (RTE) of an insulating material
BS EN 60216-5:2003 Electrical insulating materials - Thermal endurance properties - Determination of relative thermal endurance index (RTE) of an insulating material
BS DD CLC/TS 60034-18-34:2004 Rotating electrical machines. Functional evaluation of insulation systems. Test procedures for form-wound windings. Evaluation of thermomechanical endurance of insulation systems

HU-MSZT

MSZ 20880/2-1984 Solid electrical insulating materials. Determine the insulation strength. Impulse voltage test
MSZ 15747/11-1982 Electrical insulation material testing. voltage test
MSZ 263/6-1983 High voltage porcelain insulator insulated hollow structure, technical requirements and testing

YU-JUS

JUS N.H1.013-1985 Power transformers. Insulation levek and dielectric tests
JUS N.S5.607-1985 Die/ectric strength tests ofultrasonlc medlcal dlagnostfc eguipment
JUS N.H1.113-1990 Power transformers. Insulation levels and dielectric tescs. Extemal clearances in air
JUS N.A5.130-1984 Testitng of insulating materials for electrical purposes. Method of testing the resistance of insulating materials to tow voltage electric are
JUS N.F1.437-1993 Radio interference test on high-voltage insulators

SCC

UNE-EN 1094-5:1996 INSULATING REFRACTORY PRODUCTS. PART 5: DETERMINATION OF COLD CRUSHING STRENGTH.
BS 1902-4-4.1:1984 Methods of testing refractory materials. Properties measured under an applied stress-Determination of the cold crushing strength of shaped insulating refractory products (method 1902-401)
DANSK DS/EN ISO 3037:2013 Corrugated fibreboard – Determination of edgewise crush resistance (unwaxed edge method)
BS EN ISO 3037:2007 Corrugated fibreboard. Determination of edgewise crush resistance (unwaxed edge method)
BS ISO 13821:2001 Corrugated fibreboard. Determination of edgewise crush resistance. Waxed edge method
BS 2918-2:1994 Methods of test for electric strength of solid insulating materials-Additional requirements for tests using direct voltage
BS 3297-1:1974 High voltage post insulators. Tests
NS-EN ISO 3037:2013 Corrugated fibreboard — Determination of edgewise crush resistance (unwaxed edge method) (ISO 3037:2013)
NS-EN ISO 3037:2007 Corrugated fibreboard — Determination of edgewise crush resistance (unwaxed edge method) (ISO 3037:2007)
CEI EN 60512-4-3:2003 Connectors for electronic equipment - Tests and measurements - Part 4-3: Voltage stress tests - Test 4c: Voltage proof of pre-insulated crimp barrels
CEI EN 61621:1998 Dry, solid insulating materials - Resistance test to high-voltage, low-current arc discharges
UNE-EN 60243-2:2001 Electric strength of insulating materials - Test methods -- Part 2: Additional requirements for tests using direct voltage.
DANSK DS/EN 60243-3:2014 Electric strength of insulating materials - Test methods - Part 3: Additional requirements for 1,2/50 µs impulse tests
AENOR UNE-EN 61462:2008 Composite hollow insulators - Pressurized and unpressurized insulators for use in electrical equipment with rated voltage greater than 1 000 V - Definitions, test methods, acceptance criteria and design recommendations.
DANSK DS/EN 60512-4-3:2002 Connectors for electronic equipment - Tests and measurements - Part 4-3: Voltage stress tests - Test 4c: Voltage proof of pre-insulated crimp barrels
DANSK DS/EN 60243-2:2014 Electric strength of insulating materials - Test methods - Part 2: Additional requirements for tests using direct voltage
CEI EN 60243-3:2015 Electric strength of insulating materials - Test methods Part 3: Additional requirements for 1,2/50 μs impulse tests
CEI EN 60243-2:2015 Electric strength of insulating materials - Test methods Part 2: Additional requirements for tests using direct voltage
CEI EN IEC 60437:2024 Radio interference test on high-voltage insulators
CEI EN 60437:1998 Radio interference test on high-voltage insulators
DANSK DS/EN 60437:1997 Radio interference test on high-voltage insulators
BS EN 60243-3:1994 Methods of test for electric strength of solid insulating materials-Additional requirements for impulse tests
CAN/ULC-S129-2006 STANDARD METHOD OF TEST FOR SMOULDER RESISTANCE OF INSULATION (BASKET METHOD)
DIN EN ISO 3037 E:2013 Draft Document - Corrugated fibreboard - Determination of edgewise crush resistance (unwaxed edge method) (ISO/FDIS 3037:2013); German version FprEN ISO 3037:2013
CEI EN 61462:2008 Composite hollow insulators - Pressurized and unpressurized insulators for use in electrical equipment with rated voltage greater than 1000 V - Definitions, test methods, acceptance criteria and design recommendations
CEI EN 60512-19-1:2011 Connectors for electronic equipment - Tests and measurements Part 19-1: Chemical resistance tests - Test 19a: Fluid resistance of preinsulated crimp barrels
ULC S129-1995(R2001) Standard Method Of Test For Smoulder Resistance Of Insulation (Basket Method)
DANSK DS/EN 60512-19-1:2010 Connectors for electronic equipment - Tests and measurements - Part 19-1: Chemical resistance tests - Test 19a: Fluid resistance of pre-insulated crimp barrels
IEC TS 61251:1993 Electrical insulating materials - A.C. voltage endurance evaluation - Introduction
AENOR UNE-EN 60243-2:2001 Dielectric strength of insulating materials. Test methods. Part 2: Complementary requirements for tests with continuous voltage.
DIN EN 60243-2 E:2013 Draft Document - Electric strength of insulating materials - Test methods - Part 2: Additional requirements for tests using direct voltage (IEC 112/245/CDV:2013); German version FprEN 60243-2:2013
AENOR UNE-EN 60437:1999 RADIO INTERFERENCE TEST ON HIGH-VOLTAGE INSULATORS.
BS 5874:1980 Method for determination of the electric strength of insulating oils
DIN EN 61462 E:2005 Draft Document - Composite insulators - Hollow pressurized and unpressurized insulators for use in electrical equipment with rated voltage greater than 1000 V - Definitions, test methods, acceptance criteria and design recommendations (IEC 36C/158/CDV:...
IEC TS 60941:1988 Mechanical endurance functional tests for electrical insulation systems

PL-PKN

PN E04063-06-1987 On-Ioad tap changers Test methods Dielectric strength
PN H04173-1993 Refractory materials. Determination of crushing strength of insulating products
PN E04410-20-1986 Electroinsulating varnishes Test methods Testing of electric strength
PN E04410-25-1986 Electroinsulating varnishes Test methods Bond strength
PN E06323-1990 High yoltage insulators Ceramic rod insulators Ultrasonic and texture tests
PN E04410-23-1986 Electroinsulating varnishes Test methods Testing of arc resistance and tracking resistance
PN E04442-1989 Solid insulating materials Test for the resistance to tracking at high voltage and inclined specimen

AENOR

UNE 21570:1993 TEST PROCEDURE FOR THERMAL ENDURANCE OF INSULATING VARNISHES. ELECTRIC STRENGTH METHOD.
UNE-EN 60512-4-3:2002 Connectors for electronic equipment - Tests and measurements -- Part 4-3: Voltage stress tests - Test 4c: Voltage proof of pre-insulated crimp barrels.
UNE-EN 61462:2008 Composite hollow insulators - Pressurized and unpressurized insulators for use in electrical equipment with rated voltage greater than 1 000 V - Definitions, test methods, acceptance criteria and design recommendations.
UNE-EN 60437:1999 RADIO INTERFERENCE TEST ON HIGH-VOLTAGE INSULATORS.

Institute of Interconnecting and Packaging Electronic Circuits (IPC)

IPC TM-650 2.5.7.2-2007 Dielectric Withstanding Voltage (HiPot Method) - Thin Dielectric Layers for Printed Circuit Boards (PCBs)

European Committee for Standardization (CEN)

EN ISO 8895:2006 Shaped insulating refractory products - Determination of cold crushing strength (ISO 8895:2004)

European Committee for Electrotechnical Standardization（CENELEC）

HD 570 S1-1990 Test Procedure for Thermal Endurance of Insulating Varnishes - Electric Strength Method
EN 60243-2:2014 Electric strength of insulating materials - Test methods - Part 2: Additional requirements for tests using direct voltage
EN 61251:2016 Electrical insulating materials and systems - A.C. voltage endurance evaluation

Korean Agency for Technology and Standards (KATS)

KS F 2461-2000 Testing method for compressive strength of lightweight insulating concrete
KS F 2461-1985 Testing method for compressive strength of lightweight insulating concrete
KS C 2127-1996 Testing method for proof-voltage testing of thin solid electrical insulating materials
KS L 3305-2012 Testing method for compressive strength of insulating fire bricks
KS L 3305-1982 Testing method for compressive strength of insulating fire bricks
KS L 3305-1987 Testing method for compressive strength of insulating fire bricks
KS C IEC 60370:2002 Test procedure for thermal endurance of insulating varnishes－ Electric strength method
KS C IEC 60243-2:2018 Electric strength of insulating materials — Test methods — Part 2: Additional requirements for tests using direct voltage
KS C 2105-2003 Testing methods for electric strengthof solid insulating materials
KS C 2127-1996(2021) Testing method for proof-voltage testing of thin solid electrical insulating materials
KS C 2105-1982 Testing methods for electric strengthof solid insulating materials
KS C 2131-1996(2016) Testing method for dielectric breakdown voltage and dielectric strength of solid electrical insulating materials
KS C 2127-2021 Testing method for proof-voltage testing of thin solid electrical insulating materials
KS R 9197-1996(2016) Test methods for insulation resistance and withstand voltage of railway rolling stock
KS R 9197-2022 Test methods for insulation resistance and withstand voltage of railway rolling stock
KS C IEC 60243-2-2023 Electric strength of insulating materials — Test methods — Part 2: Additional requirements for tests using direct voltage
KS R 9197-1996 Test methods for insulation resistance and withstand voltage of railway rolling stock
KS F 2461-2000(2010) Testing method for compressive strength of lightweight insulating concrete
KS C 2001-1998(2018) Method for evaluating heat resistance life of solid electrical insulating materials by mechanical properties
KS P 8010-2023 Testing method for withstand voltage of personal protective equipment and insulating devices
KS R 9193-2022 Insulation resistance and withstand voltage testing methods of parts for railway signaling
KS C IEC 60216-5-2014(2019) Electrical insulating materials — Thermal endurance properties — Part 5：Determination of relative thermal endurance index(RTE) of an insulating material
KS C IEC 60437:2020 Radio interference test on high-voltage insulators
KS F 2539-1995 Method for securing,preparing and testing specimens from hardened lightweight insulating concrete for compressive strength
KS R 9193-1996 Insulation resistance and withstand voltage testing methods of parts for railway signaling
KS C 2131-2021 Testing method for dielectric breakdown voltage and dielectric strength of solid electrical insulating materials
KS P 8010-1987 Testing method for withstand voltage of personal protective equipment and insulating devices
KS P 8010-2007 Testing method for withstand voltage of personal protective equipment and insulating devices
KS R 9193-1996(2016) Insulation resistance and withstand voltage testing methods of parts for railway signaling
KS C IEC 61462-2023 Composite hollow insulators — Pressurized and unpressurized insulators for use in electrical equipment with rated voltage greater than 1 000 V — Definitions, test methods, acceptance criteria and design recommendations
KS C 2105-2003(2018) Dielectric strength test method for solid electrical insulating materials
KS P 8010-2018 Testing method for withstand voltage of personal protective equipment and insulating devices
KS C IEC 60216-2-2008(2018) Electrical insulating materials－Thermal endurance properties－Part 2：Determination of thermal endurance properties of electrical insulating materials－Choice of test criteria
KS C 2130-1996(2021) Testing method for high-voltage, low-current, dry arc resistance of solid electrical insulation
KS C IEC 60216-2-2023 Electrical insulating materials－Thermal endurance properties－Part 2：Determination of thermal endurance properties of electrical insulating materials－Choice of test criteria
KS C 2131-1996 Testing method for dielectric breakdown voltage and dielectric strength of solid electrical insulating materials

Association Francaise de Normalisation

NF C26-227:1992 METHODS OF TEST FOR ELECTRIC STRENGTH OF SOLID INSULATING MATERIALS. PART 2 : ADDITIONAL REQUIREMENTS FOR TESTS USING DIRECT VOLTAGE.
NF B40-345*NF EN ISO 8895:2006 Shaped insulating refractory products - Determination of cold crushing strength.
NF EN 61621:1998 Dry Solid Insulating Materials - High Voltage, Low Current Arc Discharge Resistance Test
NF C26-227*NF EN 60243-2:2014 Electric strength of insulating materials - Test methods - Part 2 : additional requirements for tests using direct voltage
NF C26-227:2001 Electric strengh of insulating materials - Test methods - Part 2 : additional requirements for tests using direct voltage.
NF B40-345:1995 Insulating refractory products. Part 5 : determination of cold crushing strength.
NF C26-302*NF EN 60216-2:2006 Electrical insulating materials - Thermal endurance properties - Part 2 : determination of thermal endurance properties of electrical insulating materials - Choice of test criteria
NF EN 60437:2000 Radio disturbance testing of high voltage insulators
NF EN 60512-19-1:2011 Connectors for electronic equipment - Tests and measurements - Part 19-1: chemical resistance tests - Test 19a: fluid resistance of pre-insulated crimp terminals
NF EN IEC 60437:2024 Radio disturbance testing of high voltage insulators
NF C26-250/A1:1983 Méthodes d'essai des matières isolantes - Aptitude au poinçonnage.
NF EN 60216-2:2006 Electrical insulating materials - Thermal endurance properties - Part 2: determination of thermal endurance properties of electrical insulating materials - Choice of test criteria
NF EN 60512-4-3:2002 Connectors for electronic equipment - Tests and measurements - Part 4-3: dielectric stress tests - Test 4c: withstand voltage for pre-insulated crimping drums

BR-ABNT

ABNT 19-2.1-003-1980 Pressure resistance test of insulating refractory bricks at normal temperature
ABNT P-MB-330-1963 Test method for testing the dielectric strength of insulating mineral oils

CZ-CSN

CSN 34 6471-1986 Test methods for electric insulating materials. Test method for determination of resistance insulating materials to high-voltage arc
CSN 34 6501-1985 Tests of thermal endurance of electrical insulating materials
CSN 34 7010 Cast.65-1972 Test procedure for evalution of the thermal endurance of enamelled round wire by the loss of electric strength enamel insulation
CSN 34 6467-1986 Test method for determination of resistance of insulating materials to low-voltage, high-current d.c. arc
CSN 35 1088-1984 Power transformers. Methods for insulation electrical strength tests under alternating voltage
CSN 35 1087-1983 Power transformers. Procedures for switching impulse testing of eleotrical strength of internal insulation
CSN 34 6463-1983 Methods of test for electric strenght of solid insulating materials at power frequencies

GSO

GSO ISO 3037:2015 Corrugated fibreboard -- Determination of edgewise crush resistance (unwaxed edge method)
GSO IEC 60370:2013 Test procedure for thermal endurance of insulating varnishes - Electric strength method
OS GSO IEC 60370:2013 Test procedure for thermal endurance of insulating varnishes - Electric strength method
OS GSO ISO 13821:2015 Corrugated fibreboard -- Determination of edgewise crush resistance -- Waxed edge method
GSO ISO 13821:2015 Corrugated fibreboard -- Determination of edgewise crush resistance -- Waxed edge method
GSO ISO 11432:2007 Building construction - Sealants – Determination of resistance to compression
GSO IEC 60243-2:2015 Electric strength of insulating materials - Test methods - Part 2: Additional requirements for tests using direct voltage
OS GSO ISO 3037:2015 Corrugated fibreboard -- Determination of edgewise crush resistance (unwaxed edge method)
GSO IEC 61621:2015 Dry, solid insulating materials - Resistance test to high-voltage, low-current arc discharges
OS GSO IEC 60512-4-3:2015 Connectors for electronic equipment - Tests and measurements - Part 4-3: Voltage stress tests - Test 4c: Voltage proof of pre-insulated crimp barrels
BH GSO IEC 61621:2016 Dry, solid insulating materials - Resistance test to high-voltage, low-current arc discharges
BH GSO IEC 60512-4-3:2016 Connectors for electronic equipment - Tests and measurements - Part 4-3: Voltage stress tests - Test 4c: Voltage proof of pre-insulated crimp barrels
DL/T 474.6-1992 Guidelines for the implementation of on-site insulation tests - Transformer operating wave induced withstand voltage test
OS GSO IEC 60216-2:2010 Electrical insulating materials - Thermal endurance properties - Part 2: Determination of thermal endurance properties of electrical insulating materials - Choice of test criteria
BH GSO IEC 60243-3:2016 Electric strength of insulating materials - Test methods - Part 3: Additional requirements for 1,2/50 µs impulse tests
OS GSO IEC 60506:2002 Switching Impulse Tests on High-Voltage Insulators
GSO IEC 60506:2002 Switching Impulse Tests on High-Voltage Insulators
OS GSO IEC 60512-19-1:2013 Connectors for electronic equipment - Tests and measurements - Part 19-1: Chemical resistance tests - Test 19a: Fluid resistance of pre-insulated crimp barrels
GSO IEC 60216-2:2010 Electrical insulating materials - Thermal endurance properties - Part 2: Determination of thermal endurance properties of electrical insulating materials - Choice of test criteria
GSO IEC 60512-4-3:2015 Connectors for electronic equipment - Tests and measurements - Part 4-3: Voltage stress tests - Test 4c: Voltage proof of pre-insulated crimp barrels

International Electrotechnical Commission (IEC)

IEC 60370:1971 Test procedure for thermal endurance of insulating varnishes - Electric strength method
IEC 60243-2:2001 Electric strength of insulating materials - Test methods - Part 2: Additional requirements for tests using direct voltage
IEC 60216-2:2005 Electrical insulating materials - Thermal endurance properties - Part 2: Determination of thermal endurance properties of electrical insulating materials - Choice of test criteria
IEC 60243-2:2013 Electric strength of insulating materials - Test methods - Part 2: Additional requirements for tests using direct voltage

German Institute for Standardization

DIN IEC 60370:1994 Test procedure for thermal endurance of insulating varnishes - Electric strength method (IEC 60370:1971); German version HD 570 S1:1990
DIN 52272-1:1982 Testing of mineral fibrous insulating materials; pressure test; evaluation of compressive stress and resistance to compression
DIN EN ISO 3037:2023-03 Corrugated fibreboard - Determination of edgewise crush resistance (non-waxed edge method) (ISO 3037:2022); German version EN ISO 3037:2022

TR-TSE

TS 3289-1979 DETERMINATION OF COMPRESSIVE STRENGTH OF LIGHTWEIGHT AGGREGATE INSULATING CONCRETE TEST SPECIMENS

KR-KS

KS C IEC 60243-2-2018 Electric strength of insulating materials — Test methods — Part 2: Additional requirements for tests using direct voltage
KS C IEC 60243-2-2018(2023) Electric strength of insulating materials — Test methods — Part 2: Additional requirements for tests using direct voltage
KS R 9197-1996(2016)(英文版) Test methods for insulation resistance and withstand voltage of railway rolling stock
KS P 8010-2018(2023) Testing method for withstand voltage of personal protective equipment and insulating devices
KS C IEC 60437-2020 Radio interference test on high-voltage insulators
KS C IEC 61462-2018(2023) Composite hollow insulators — Pressurized and unpressurized insulators for use in electrical equipment with rated voltage greater than 1 000 V — Definitions, test methods, acceptance criteria and desi

RU-GOST R

GOST 15634.4-1970 Magnet wire. Methods of the breakdown voltage test
GOST 26130-1984 Electrical insulating paper. Methods for determination of electrical strength at alternating (frequency of 50 Hz) and constant voltage
GOST 10390-1986 Electrical equipment for voltages 3 kV and higher. Test methods of electric strength of external insulation in conditions of contamination
GOST 22756-1977 Power and voltage transformers and reactors. Test methods of electric insulation strength
GOST 22091.15-1986 X-ray devices. The method of electric strenght test
GOST R 53167-2008 Methods for determination of endurance of polymer electrical insulation materials and systems by means of acceleration tests in chemically active media. General requirements. Materials and insulation systems for law-voltage electrical products tests
GOST 12268-1979 Electrical insulating board. Methods for determination of test voltage resistance, surface discharge resistance and compressibility under pressure
GOST R IEC 60245-3-1997 Rubber insulated cables of rated voltages to 450/750 V including. Heat resistant silicone insulated cables

ZA-SANS

SANS 5913:1980 Cold crushing strength of shaped insulating refractory bricks
SANS 5920:1980 Modulus of rupture at room temperature of dense and insulating refractory bricks

American Society for Testing and Materials (ASTM)

ASTM D3755-20 Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials Under Direct-Voltage Stress
ASTM D1389-07 Standard Test Method for Proof-Voltage Testing of Thin Solid Electrical Insulating Materials
ASTM D2477-02 Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Insulating Gases at Commercial Power Frequencies
ASTM D2477-02e1 Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Insulating Gases at Commercial Power Frequencies
ASTM D2477-07 adjunct 2009 Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Insulating Gases at Commercial Power Frequencies
ASTM D2477-02e2 Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Insulating Gases at Commercial Power Frequencies
ASTM D2477-96 Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Insulating Gases at Commercial Power Frequencies
ASTM D2477-07(2020) Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Insulating Gases at Commercial Power Frequencies
ASTM C495-99a Standard Test Method for Compressive Strength of Lightweight Insulating Concrete
ASTM C495/C495M-12(2019) Standard Test Method for Compressive Strength of Lightweight Insulating Concrete
ASTM D1389-97a(2004) Standard Test Method for Proof-Voltage Testing of Thin Solid Electrical Insulating Materials
ASTM D3251-19 Standard Test Method for Thermal Endurance Characteristics of Electrical Insulating Varnishes Applied Over Film-Insulated Magnet Wire
ASTM C495/C495M-12 Standard Test Method for Compressive Strength of Lightweight Insulating Concrete
ASTM D495-99 Standard Test Method for High-Voltage, Low-Current, Dry Arc Resistance of Solid Electrical Insulation
ASTM D495-99(2004) Standard Test Method for High-Voltage, Low-Current, Dry Arc Resistance of Solid Electrical Insulation

American National Standards Institute （ANSI)

ANSI/ASTM D1389:2007 Test Method for Proof-Voltage Testing of Thin Solid Electrical Insulating Materials
ANSI/ASTM A717/A 717M:2001 Test Method for Surface Insulation Resistivity of Single-Strip Specimens

RO-ASRO

STAS 10242/1-1975 Electrical insulating varnishes DETERMINATION OF THERMAL ENDURANCE Electric strength method
STAS 10242/3-1975 Electrical insulating varnishes DETERMINATION OF THERMAL ENDURANCE Crack Icrmaticn method
STAS 6257-1980 SOLID ELECTROINSULATING MATERIALS Methods of test for electric strength
STAS 286-1981 ELECTRICAL INSULATING OILS Determin ation of electric strength

Standard Association of Australia （SAA）

AS/NZS 1301.444:2016 Methods of test for pulp and paper, Method 444: Determination of edgewise crush resistance (unwaxed edge method)
AS 1767.2.4:1999 Insulating liquids - Test methods - Detection and determination of specified anti-oxidant additives in insulating oils

IN-BIS

IS 11256 Pt.1-1985 Test methods for determination of heat resistance of insulating varnishes - Part 1 Electrical strength method
IS 1528 Pt.17-1993 Methods for sampling and physical testing of refractory materials Part 17 Determination of cold crushing strength of shaped insulating refractory products

Danish Standards Foundation

DS/EN 679:1994 Determination of the compressive strength of autoclaved aerated concrete
DS/EN 60512-4-3:2002 Connectors for electronic equipment - Tests and measurements - Part 4-3: Voltage stress tests - Test 4c: Voltage proof of pre-insulated crimp barrels
DS/EN 60437:1998 Radio interference test on high-voltage insulators
DS/EN 60243-2:2001 Electrical strength of insulating materials - Test methods - Part 2: Additional requirements for tests using direct voltage
DS/EN 60216-2:2006 Electrical insulating materials – Thermal endurance properties – Part 2: Determination of thermal endurance properties of electrical insulating materials – Choice of test criteria
DS/IEC 243-2:1991 Methods of test for electric strength of solid insulating materials. Part 2: Additional requirements for tests using direct voltage

NL-NEN

NEN 2763-1986 Power transformers Insulation levels and dielectric tests

VN-TCVN

TCVN 4164-1985 Insulation construction of electrical machines.Methods for accelerated determination of heat resistance

ES-UNE

UNE-EN ISO 3037:2023 Corrugated fibreboard - Determination of edgewise crush resistance (non-waxed edge method) (ISO 3037:2022)
UNE-EN 60216-2:2005 Electrical insulating materials - Thermal endurance properties -- Part 2: Determination of thermal endurance properties of electrical insulating materials - Choice of test criteria (Endorsed by AENOR in December of 2005.)
UNE-EN 60243-3:2014 Electric strength of insulating materials - Test methods - Part 3: Additional requirements for 1,2/50 µs impulse tests (Endorsed by AENOR in October of 2014.)
UNE-EN 60512-19-1:2010 Connectors for electronic equipment - Tests and measurements -- Part 19-1: Chemical resistance tests - Test 19a: Fluid resistance of pre-insulated crimp barrels (Endorsed by AENOR in September of 2010.)
UNE-EN 60243-2:2014 Electric strength of insulating materials - Test methods - Part 2: Additional requirements for tests using direct voltage (Endorsed by AENOR in October of 2014.)

FI-SFS

SFS 5275-1987 Insulator. Plastic insulation testing
SFS 5454-1988 Pipe insulation, slot insulation and equipment insulation. Testing of insulating materials, insulating elements and coatings

Lithuanian Standards Office

LST 1765-2001 Test procedure for thermal endurance of insulating varnishes. Electric strength method [HD 570 S1:1990 (IEC 60370:1971)]
LST EN 60243-2-2002 Electric strength of insulating materials. Test methods. Part 2: Additional requirements for tests using direct voltage (IEC 60243-2:2001)
LST EN 60243-3-2002 Electrical strength of insulating materials. Test methods. Part 3: Additional requirements for 1,2/50 µs impulse tests
LST EN 61462-2008 Composite hollow insulators - Pressurized and unpressurized insulators for use in electrical equipment with rated voltage greater than 1 000 V - Definitions, test methods, acceptance criteria and design recommendations (IEC 61462:2007)
LST EN 61621-2001 Dry solid insulating materials. Resistance test to high-voltage, low-current arc discharges (IEC 61621:1997)
LST EN 60512-4-3-2003 Connectors for electronic equipment. Tests and measurements. Part 4-3: Voltage stress tests. Test 4c: Voltage proof of pre-insulated crimp barrels (IEC 60512-4-3:2002)

Japanese Industrial Standards Committee (JISC)

JIS C 2110:1994 Testing methods for electric strength of solid insulating materials
JIS C 2110-2:2010 Solid electrical insulating materials -- Test methods for electric strength -- Part 2: Tests using direct voltage
JIS E 4014:2007 Rolling stock -- Test methods for insulation resistance and withstand voltage
JIS E 4014:2012 Rolling stock -- Test methods for insulation resistance and withstand voltage
JIS C 2110-3:2016 Solid electrical insulating materials -- Test methods for electric strength -- Part 3: Tests using impulse voltage
JIS C 2110-2:2016 Solid electrical insulating materials -- Test methods for electric strength -- Part 2: Tests using direct voltage
JIS C 2110-3:2010 Solid electrical insulating materials -- Test methods for electric strength -- Part 3: Tests using impulse voltage
JIS E 4014:1989 Test methods for insulation resistance and withstand voltage of railway rolling stock
JIS T 8010:2001 Testing method for withstand voltage of personal protective equipment and insulating devices
JIS T 8010:1979 Testing method for withstand voltage of personal protective equipment and insulating devices
JIS T 8010:2017 Testing method for withstand voltage of personal protective equipment and insulating devices
JIS E 3021:1999 Insulation resistance and withstand voltage testing methods of parts for railway signaling

AR-IRAM

IRAM OFICLAL 2083-N.I.O.-1947 Test method for dielectric strength of household appliances

GM Europe

GME 60294-1993 Testing the chemical resistance of insulating mats (English/German)

BELST

STB 1610-2006 Metal panels with foam mineral-wool plates insulation and plastic foam insulation. Methods of test by loading. Rules of an estimation of durability and rigidity

Institute of Electrical and Electronics Engineers (IEEE)

IEEE 82-2002 Standard Test Procedure for Impulse Voltage Tests on Insulated Conductors
IEEE 82-1994 Test procedure for impulse voltage tests on insulated conductors
IEEE 82-1963 IEEE Test Procedure for Impulse Voltage Tests on Insulated Conductors
IEEE Std 82-1963 IEEE Test Procedure for Impulse Voltage Tests on Insulated Conductors

CENELEC - European Committee for Electrotechnical Standardization

EN 60243-3:2001 Electric Strength of Insulating Materials - Test Methods - Part 3: Additional Requirements for 1@2/50 US Impulse Tests
EN 60243-2:2001 Electric Strength of Insulating Materials - Test Methods Part 2: Additional Requirements for Tests Using Direct Voltage

Indonesia Standards

SNI 04-3868-2001 Radio interference test for high voltage insulators

VDE - VDE Verlag GmbH@ Berlin@ Germany

VDE 0884-17-2016 Semiconductor devices - Magnetic and capacitive coupler for basic and reinforced insulation (IEC 47E/511/CD:2015)

IEEE - The Institute of Electrical and Electronics Engineers@ Inc.

IEEE 41-1930 Insulator Tests
IEEE 41-1944 Insulator Tests

PT-IPQ

NP 2887-1984 Circuit insulation materials and related accessories. Vibration testing of high voltage insulators

Others: