plastic epoxy viscosity

plastic epoxy viscosity, Total:242 items.

The international standard classification for "plastic epoxy viscosity" includes: Plastics , Thermosetting materials , Plastics in general , Waterproofing .

The Chinese standard classification for "plastic epoxy viscosity" includes: Basic standards and general methods for synthetic resin and plastic , Synthetic resin and plastic , Roof and pavement waterproof and barrier material .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 12007.4-1989 Epoxide resins-Determination of viscosity
GB/T 41928-2022 Plastics—Epoxy resins—Determination of degree of crosslinking of crosslinked epoxy resins by differential scanning calorimetry (DSC)
GB/T 41880-2022 Plastics—Epoxy resins—Determination of electrical conductivity of aqueous resin extracts
GB/T 41926-2022 Plastics—Epoxy resins—Determination of 1,2-glycol content
GB/T 41929-2022 Plastics—Epoxy resins—Test methods
GB/T 1630.2-2023 Plastics—Epoxy resins—Part 2: Preparation of test specimens and determination of properties of crosslinked epoxy resins
GB/T 22314-2008 Plastics - Epoxide resins - Determination of viscosity
GB/T 1630.1-2008 Plastics - Epoxy resins - Part 1: Designation

Taiwan Provincial Standard of the People's Republic of China

CNS 13065-1992 Methods of Test for Viscosity of Epoxy Resins and Hardeners
CNS 4938-1987 Epoxy Resin Paint

Professional Standard - Chemical Industry

HG/T 6275-2024 Isocyanate modified epoxy resin for plastic copper clad laminate
HG/T 4765-2014 Epoxy resin for coatings

Professional Standard - Building Materials

JC/T 2217-2014 Epoxy resin waterproof coating

SCC

MIL MIL-R-82664-1977 RESIN, EPOXY, LOWVISCOSITY
BS ISO 18280:2005 Plastics. Epoxy resins. Test methods
11/30211364 DC BS ISO 14322. Plastics. Epoxy resins. Determination of degree of cure of cured epoxy resins by differential scanning calorimetry
MIL MIL-M-46069-1964 MOLDING PLASTIC, GLASS/EPOXY PRE-MIX
DANSK DS/EN ISO 3673-1:1999 Plastics - Epoxy resins - Part 1: Designation
09/30192396 DC BS ISO 18280. Plastics. Epoxy resins. Test methods
HOLDEN HN 2186-1995 Adhesive - Epoxy - Two Part
HOLDEN HN 2186-2014 ADHESIVE - EPOXY - TWO PART
05/30126736 DC ISO 21318. Plastics. Epoxy resins. Determination of electrical conductivity of aqueous resin extracts
BS EN ISO 21627-3:2003 Plastics. Epoxy resins. Determination of chlorine content-Total chlorine
IAPMO IGC 292-2012(R2020) Plastic Shower Pans with Epoxy-Bonded Drain Pipes
DANSK DS/EN ISO 3673-2:2012 Plastics - Epoxy resins - Part 2: Preparation of test specimens and determination of properties of crosslinked epoxy resins
BS ISO 21048:2004 Plastics. Epoxy resins. Determination of 1,2-glycol content
BS EN ISO 21627-1:2003 Plastics. Epoxy resins. Determination of chlorine content-Inorganic chlorine
DANSK DS/EN ISO 4895:2014 Plastics – Liquid epoxy resins – Determination of tendency to crystallize
BS EN ISO 4597-1:1998 Plastics. Hardeners and accelerators for epoxide resins-Designation
BS EN ISO 3673-2:2000 Plastics. Epoxy resins-Preparation of test specimens and determination of properties
MIL MIL-DTL-25421C-2009 Plastic Materials, Glass Fiber Base - Epoxy Resin, Low Pressure Laminated
NS-EN ISO 3673-1:1999 Plastics — Epoxy resins — Part 1: Designation (ISO 3673-1:1996)
AENOR UNE-EN ISO 3673-1:2000 PLASTICS - EPOXY RESINS - PART 1: DESIGNATION (ISO 3673-1:1996)
BS EN ISO 21627-2:2003 Plastics. Epoxy resins. Determination of chlorine content-Easily saponifiable chlorine
CAN/CGSB-1.184-1998 Coal tar-epoxy resin coating
BS ISO 13651:1996 Plastics. Epoxy resins and related materials. Determination of total saponifiable chlorine
MIL MIL-I-24768/26-1992 INSULATION, PLASTIC, LAMINATED, THERMOSETTING, PAPER-BASE, EPOXY-RESIN (PEE)
MIL MIL-A-81253-1965 ADHESIVE, EPOXY RESIN WITH POLYAMINE CURING AGENT
MIL MIL-A-82832-1990 ADHESIVE, EPOXY RESIN, STRUCTURAL BONDING (NO S/S DOCUMENT)
NS-EN ISO 3673-2:2012 Plastics - Epoxy resins - Part 2: Preparation of test specimens and determination of properties of crosslinked epoxy resins (ISO 3673-2:2012)
AENOR UNE-EN ISO 3673-2:2013 Plastics - Epoxy resins - Part 2: Preparation of test specimens and determination of properties of crosslinked epoxy resins (ISO 3673-2:2012)
MIL MIL-I-24768/2-1992 INSULATION, PLASTIC, LAMINATED, THERMOSETTING, GLASS-CLOTH, EPOXY-RESIN (GEE)
MIL MIL-I-24768/3-1992 INSULATION, PLASTIC, LAMINATED, THERMOSETTING, GLASS-CLOTH, EPOXY-RESIN (GEB)

CZ-CSN

CSN 64 0342-1990 1'lastics. 'JVrrriosetting easting resins. Jetcrinination of viscosity incrrnso of joxy resms (hiriiig cm-hig
CSN 64 0341-1990 Plastics. Termosetting casting resins. etermination of temperature increa- e of epoxy resins during curing
CSN 64 0334-1990 Plastius. Detemiinationof ester equivalent / epoxy resins
CSN 64 1311-1992 Plastics. Epoxy resins. Determination of easily saponifiable chlorine.
CSN 64 1312-1992 Plastics. Polyester and epoxy resins. Determination of total volume shrinkage

Institute of Interconnecting and Packaging Electronic Circuits (IPC)

IPC TM-650 5.1.416-1975 Analysis of Epoxy Resins for Viscosity

Association Francaise de Normalisation

NF T51-520:1978 EPOXY RESINS. DESIGNATION.
NF EN ISO 3673-1:1999 Plastiques - Résines époxydes - Partie 1 : désignation
NF T51-520-2*NF EN ISO 3673-2:2012 Plastics - Epoxy resins - Part 2 : preparation of test specimens and determination of properties of crosslinked epoxy resins.
NF T51-527:1985 Plastics. Epoxies. Determination of properties.
NF T51-522*NF EN ISO 3001:1999 Plastics. Epoxy compounds. Determination of epoxy equivalent.
NF EN ISO 3673-2:2012 Plastiques - Résines époxydes - Partie 2 : préparation des éprouvettes et détermination des propriétés des résines époxydes réticulées
NF T57-559:1975 Plastics materials reinforced with textile glass . Pre impregnated glass fabrics based on epoxy resins. Binding time.
NF EN ISO 4615:1999 Plastics - Unsaturated and epoxy polyester resins - Determination of total chlorine content
NF EN ISO 4895:2014 Plastics - Liquid epoxy resins - Determination of crystallization tendency
NF T51-520-1*NF EN ISO 3673-1:1999 Plastics. Epoxy resins. Part 1 : designation
NF EN ISO 15252-3:2000 Plastiques - Poudres à mouler à base d'époxydes (EP-PMC) - Partie 3 : exigences relatives à certaines poudres à mouler
NF T51-526*NF EN ISO 4895:2014 Plastics - Liquid epoxy resins - Determination of tendency to crystallize
NF T51-526:1999 Plastics. Liquid epoxy resins. Determination of tendency to crystallize.
NF T51-501*NF EN ISO 3521:1999 Plastics. Unsaturated polyester and epoxy resins. Determination of overall volume shrinkage.

RO-ASRO

STAS 12841-1990 Plastics EPOXY RESINS Epoxy equivalent determination

RU-GOST R

GOST R 57687-2017 Plastics. Epoxy resins. Determination of degree of crosslinking of crosslinked epoxy resins by differential scanning calorimetry
GOST R 50492-2015 Plastics. Liquid epoxy resins. Determination of tendency to crystallize
GOST R 50492-1993 Plastics. Liquid epoxide resins. Determination of tendency to cristallize
GOST 28593-1990 Epoxy resins for self-extinguishing laminates. Test methods

GSO

BH GSO ISO 14322:2016 Plastics - Epoxy resins - Determination of degree of crosslinking of crosslinked epoxy resins by differential scanning calorimetry
GSO ISO 14322:2013 Plastics - Epoxy resins - Determination of degree of crosslinking of crosslinked epoxy resins by differential scanning calorimetry
GSO ISO 18280:2014 Plastics -- Epoxy resins -- Test methods
OS GSO ISO 18280:2014 Plastics -- Epoxy resins -- Test methods
BH GSO ISO 18280:2016 Plastics -- Epoxy resins -- Test methods
GSO ISO 21318:2009 Plastics - Epoxy resins - Determination of electrical conductivity of aqueous resin extracts
OS GSO ISO 21318:2009 Plastics - Epoxy resins - Determination of electrical conductivity of aqueous resin extracts
BH GSO ISO 4895:2017 Plastics -- Liquid epoxy resins -- Determination of tendency to crystallize
OS GSO ISO 4895:2016 Plastics -- Liquid epoxy resins -- Determination of tendency to crystallize
GSO ISO 4895:2016 Plastics -- Liquid epoxy resins -- Determination of tendency to crystallize
OS GSO ISO 21048:2013 Plastics - Epoxy resins - Determination of 1,2-glycol content
GSO ISO 21048:2013 Plastics - Epoxy resins - Determination of 1,2-glycol content

British Standards Institution (BSI)

BS ISO 14322:2018 Plastics. Epoxy resins. Determination of degree of crosslinking of crosslinked epoxy resins by differential scanning calorimetry (DSC)
BS ISO 18280:2010 Plastics. Epoxy resins. Test methods
BS ISO 18280:2009 Plastics. Epoxy resins. Test methods
BS EN ISO 3673-2:2012 Plastics. Epoxy resins. Preparation of test specimens and determination of properties of crosslinked epoxy resins
BS ISO 14322:2012 Plastics. Epoxy resins. Determination of degree of crosslinking of crosslinked epoxy resins by differential scanning calorimetry
BS EN ISO 3673-1:1997 Plastics. Epoxy resins. Designation
BS EN ISO 3673-1:2000 Plastics - Epoxy resins - Designation
BS ISO 21318:2007 Plastics - Epoxy resins - Determination of electrical conductivity of aqueous resin extracts
BS ISO 20368:2017 Plastics. Epoxy resins. Determination of degree of crosslinking of crosslinked epoxy resins by Fourier Transform Infrared (FTIR) Spectroscopy
BS EN ISO 21627-3:2009 Plastics - Epoxy resins - Determination of chlorine content - Total chlorine
BS EN ISO 4895:2014 Plastics. Liquid epoxy resins. Determination of tendency to crystallize
BS EN ISO 4895:1998 Plastics - Liquid epoxy resins - Determination of tendency to crystallize
BS EN ISO 4895:2000 Plastics - Liquid epoxy resins - Determination of tendency to crystallize
BS ISO 21048:2014 Plastics. Epoxy resins. Determination of 1,2-glycol content
BS ISO 4895:1998 Plastics. Liquid epoxy resins. Determination of tendency to crystallize
BS EN ISO 21627-1:2009 Plastics - Epoxy resins - Determination of chlorine content - Inorganic chlorine
BS EN ISO 21627-2:2009 Plastics - Epoxy resins - Determination of chlorine content - Easily saponifiable chlorine
BS EN ISO 4583:1998 Plastics — Epoxy resins and related materials — Determination ofeasily saponifiable chlorine

Japanese Industrial Standards Committee (JISC)

JIS K 7148-1:2015 Plastics -- Epoxy resins -- Determination of degree of crosslinking of crosslinked epoxy resins by differential scanning calorimetry
JIS K 7147:2008 Plastics -- Epoxy resins -- Test methods
JIS K 7148-1:2022 Plastics -- Epoxy resins -- Part 1: Determination of degree of crosslinking of crosslinked epoxy resins by differential scanning calorimetry (DSC)
JIS K 5551:2002 Epoxy resin paint
JIS K 5551:1991 Epoxy resin paint
JIS K 7233:1986 Testing methods for viscosity of epoxide resins and hardeners
JIS K 6757:2005 Plastics -- Epoxy resins -- Determination of electric conductivity of resin aqueous extracts
JIS K 7146:2006 Plastics -- Epoxy resins -- Determination of 1,2-glycol content
JIS K 5664:1995 Tar epoxy resin paint
JIS K 5555:1991 Epoxy resin micaceous iron oxide paint
JIS K 6756:1999 Plastics -- Liquid epoxy resins -- Determination of tendency to crystallize
JIS K 6755:1999 Plastics -- Epoxy resins and related materials -- Determination of easily saponifiable chlorine
JIS K 5551 ERRATUM 1:2002 Epoxy resin paint (Erratum 1)
JIS K 5555:2002 Epoxy resin Micaceous Iron Oxide paint

U.S. Military Regulations and Norms

ARMY A-A-50272-1997 ADHESIVES, EPOXY
ARMY A-A-59109 B VALID NOTICE 1-2006 ADHESIVE, EPOXY RESIN BASE
ARMY A-A-59109 B-2001 ADHESIVE, EPOXY RESIN BASE
ARMY A-A-59785-2005 EPOXY COATING KIT (EPOXY RESIN SYSTEM)
ARMY MIL-C-47224 B NOTICE 1-1996 COMPOUND MOLDING, TRANSFER, EPOXY RESIN, SINGLE-COMPONENT
ARMY MIL-C-47224 B-1993 COMPOUND MOLDING, TRANSFER, EPOXY RESIN, SINGLE-COMPONENT
ARMY MIL-DTL-25421 C-2009 PLASTIC MATERIALS, GLASS FIBER-EPOXY RESIN, LOW PRESSURE LAMINATED
ARMY MIL-A-52194 A VALID NOTICE 1-1989 ADHESIVE, EPOXY (FOR BONDING GLASS REINFORCED POLYESTER)
ARMY MIL-P-25421 B VALID NOTICE 1-1991 PLASTIC MATERIALS, GLASS FIBER-EPOXY RESIN, LOW PRESSURE LAMINATED
ARMY MIL-P-25421 B NOTICE 2-2002 PLASTIC MATERIALS, GLASS FIBER-EPOXY RESIN, LOW PRESSURE LAMINATED
ARMY MIL-P-25421 B-1971 PLASTIC MATERIALS, GLASS FIBER-EPOXY RESIN, LOW PRESSURE LAMINATED

International Organization for Standardization (ISO)

ISO 18280:2005 Plastics - Epoxy resins - Test methods
ISO 18280:2010 Plastics - Epoxy resins - Test methods
ISO 14322:2012 Plastics - Epoxy resins - Determination of degree of crosslinking of crosslinked epoxy resins by differential scanning calorimetry
ISO 20368:2017 Plastics - Epoxy resins - Determination of degree of crosslinking of crosslinked epoxy resins by Fourier Transform Infrared (FTIR) Spectroscopy
ISO 21318:2007 Plastics - Epoxy resins - Determination of electrical conductivity of aqueous resin extracts
ISO 14322:2018 Plastics - Epoxy resins - Determination of degree of crosslinking of crosslinked epoxy resins by differential scanning calorimetry (DSC)
ISO 3673-1:1996 Plastics - Epoxy resins - Part 1 : Designation
ISO 11376:1997 Plastics - Epoxy resins and glycidyl esters - Determination of inorganic chlorine
ISO 4895:1997 Plastics - Liquid epoxy resins - Determination of tendency to crystallize
ISO 4895:2014 Plastics - Liquid epoxy resins - Determination of tendency to crystallize
ISO 9371:1990 Plastics; phenolic resins in the liquid state or in solution; determination of viscosity
ISO 21048:2014 Plastics - Epoxy resins - Determination of 1,2-glycol content
ISO 3673-1:1980 Plastic; Epoxide resins; Part 1 : Designation
ISO 21048:2004 Plastics - Epoxy resins - Determination of 1,2-glycol content
ISO 4895:1987 Plastics; Liquid epoxide resins; Determination of tendency to crystallize
ISO 4583:1978 Plastics; Epoxide resins and related materials; Determination of easily saponifiable chlorine
ISO 4583:1998 Plastics - Epoxy resins and related materials - Determination of easily saponifiable chlorine

General Motors Corporation (GM)

GM 9985985-1994 Adhesive, Two-Part, Epoxy, Resin
GM 9985602-1994 Adhesive, Two-Part, Epoxy, Resin Revision C
GM 9982117-1993 Adhesive, Two-Part, Epoxy, Resin Revision A [Replaced: GMNA 9985481]
GM 9986091-1998 Adhesive, Two-Part, Epoxy Resin Revision A

Korean Agency for Technology and Standards (KATS)

KS M 3822-2008(2018) Testing methods for viscosity of epoxide resins and hardners
KS M ISO 3673-1-2007(2017) Plastics－Epoxy resins－Part 1：Designation
KS M ISO 3673-1:2022 Plastics — Epoxy resins — Part 1: Designation
KS M 3822-2023 Testing methods for viscosity of epoxide resins and hardners
KS M ISO 4895:2010 Plastics－Liquid epoxy resins－Determination of tendency to crystallize
KS M ISO 3673-1:2007 Plastics－Epoxy resins－Part 1：Designation
KS M ISO 4895-2010(2020) Plastics－Liquid epoxy resins－Determination of tendency to crystallize
KS M ISO 4895-2020 Plastics－Liquid epoxy resins－Determination of tendency to crystallize
KS M 5307-1986 TAR EPOXY RESIN PAINTS
KS M 5307-2002 TAR EPOXY RESIN PAINTS
KS M ISO 7142:2022 Binders for paints and varnishes — Epoxy resins — General methods of test

PL-PKN

PN C89085-06-1986 Epoxy resins Methods of testing Determination of viscosity

Danish Standards Foundation

DS/EN ISO 3673-1:1999 Plastics - Epoxy resins - Part 1: Designation
DS/EN ISO 3673-2:2012 Plastics - Epoxy resins - Part 2: Preparation of test specimens and determination of properties of crosslinked epoxy resins
DS/EN ISO 4895:1999 Plastics - Liquid epoxy resins - Determination of tendency to crystallize

German Institute for Standardization

DIN EN ISO 3673-1:1999-10 Plastics - Epoxy resins - Part 1: Designation (ISO 3673-1:1996); German version EN ISO 3673-1:1999
DIN EN ISO 3673-1:1999 Plastics - Epoxy resins - Part 1: Designation (ISO 3673-1:1996); German version EN ISO 3673-1:1999
DIN EN ISO 3673-2:2012-10 Plastics - Epoxy resins - Part 2: Preparation of test specimens and determination of properties of crosslinked epoxy resins (ISO 3673-2:2012); German version EN ISO 3673-2:2012
DIN EN ISO 4895:1999 Plastics - Liquid epoxy resins - Determination of tendency to crystallize (ISO 4895:1997); German version EN ISO 4895:1999
DIN EN ISO 4895:2014-11 Plastics - Liquid epoxy resins - Determination of tendency to crystallize (ISO 4895:2014); German version EN ISO 4895:2014
DIN EN ISO 4895 E:2013-06 Determination of crystallization tendency of plastic liquid epoxy resin (draft)

KR-KS

KS M ISO 3673-1-2022 Plastics — Epoxy resins — Part 1: Designation
KS M 3822-2008(2023) Testing methods for viscosity of epoxide resins and hardners

(U.S.) Ford Automotive Standards

FORD WSB-M2G372-A-1995 ADHESIVE, EXTRUDABLE EPOXY BASED, THUMB GRADE FORM, STRUCTURAL
FORD M3D26-A-1990 EPOXY THERMOSETTING LAMINATING RESIN AND HARDENER - PLASTIC TOOL MANUFACTURE

YU-JUS

JUS G.S1.831-1991 Plastics.Polyester and epoxy casting resins.Determination of total volume skrinkage
JUS G.S1.813-1991 Plastics.Epoxide resins and qlicidyl esters.Determination of inorqanic chlorine
JUS G.S1.812-1991 Plastics. Liquid epoxide resins. Determination of tendency to crystallize
JUS G.C1.814-1991 Plastics. Hardeners and accelerators for epoxide resins. Designation

GM North America

GM 9981347-1993 Adhesive, One-Part, Epoxy
GM 9985560-1993 Adhesive, Induction Cure, Epoxy

Indonesia Standards

SNI 06-6446.2-2000 Test methods for viscosity of epoxy resins and hardeners

United States Navy

NAVY QPL-MMM-A-134-11 NOTICE 2-2009 ADHESIVES, EPOXY RESIN, METAL STRUCTURAL BONDING
NAVY QPL-MMM-A-134-11 NOTICE 2-2010 ADHESIVES, EPOXY RESIN, METAL STRUCTURAL BONDING
NAVY QPL-MMM-A-134-11 NOTICE 2 -QPD-2010 ADHESIVES, EPOXY RESIN, METAL STRUCTURAL BONDING
NAVY MIL-M-46069 (2)-1965 MOLDING PLASTIC, GLASS/EPOXY PRE-MIX
NAVY MIL-M-46069 ADMIN NOTICE 5-2005 MOLDING PLASTIC, GLASS/EPOXY PRE-MIX
NAVY MIL-M-46069-1964 MOLDING PLASTIC, GLASS/EPOXY PRE-MIX
NAVY QPL-22750-2012 Coating, Epoxy, High-Solids
NAVY QPL-23377-QPD-2011 Primer Coatings: Epoxy, High-Solids
NAVY QPL-MMM-A-134-2012 ADHESIVE, EPOXY RESIN, METAL TO METAL STRUCTURAL BONDING
NAVY QPL-MMM-A-134-2013 ADHESIVE, EPOXY RESIN, METAL TO METAL STRUCTURAL BONDING
NAVY QPL-MMM-A-134-QPD-2010 ADHESIVE, EPOXY RESIN, METAL TO METAL STRUCTURAL BONDING

SAE - SAE International

SAE AMS3601B-1962 Plastic Sheet@ Copper Faced Glass Fabric Reinforced Epoxy Resin
SAE AMS3691C-1995 ADHESIVE COMPOUND@ EPOXY MEDIUM TEMPERATURE APPLICATION
SAE AMS3143-1999 Powder Coating Materials@ Epoxy
SAE AMS3681E-2017 Adhesive@ Electrically Conductive Silver-Filled Epoxy Resin
SAE AMS3681D-2016 Adhesive@ Electrically Conductive Silver-Filled Epoxy Resin
SAE AMS3681F-2019 Adhesive@ Electrically Conductive Silver-Filled Epoxy Resin
SAE AMS3671-1980 Plastic Molding Compound@ Novolac Epoxy Resin@ Short Glass Fiber Reinforced@ Structural
SAE AMS3671B-1992 Plastic Molding Compound@ Novolac Epoxy Resin@ Short Glass Fiber Reinforced@ Structural
SAE AMS3671C-1996 Plastic Molding Compound@ Novolac Epoxy Resin@ Short Glass Fiber Reinforced@ Structural
SAE AMS3589-1984 PLASTIC TUBING@ ELECTRL. INSULTN. RESIN BONDED

Society of Automotive Engineers (SAE)

SAE AMS3601D-2004 Plastic Sheet, Copper Faced Glass Fabric Reinforced Epoxy Resin Hot Strength Retention
SAE AMS3692B-1993 ADHESIVE COMPOUND, EPOXY High Temperature Application
SAE AMS3692C-2022 Adhesive Compound, Epoxy Resin High Temperature Application
SAE AMS3681C-2005 Adhesive, Electrically Conductive Silver-Filled Epoxy Resin
SAE AMS3692A-1986 ADHESIVE COMPOUND, EPOXY High Temperature Application
SAE AMS3690B-2000 Adhesive Compound, Epoxy Room Temperature Curing
SAE AMS3690-1960 ADHESIVE COMPOUND, EPOXY Room Temperature Curing
SAE AMS3692-1960 ADHESIVE COMPOUND, EPOXY High Temperature Application
SAE AMS3750A-1994 Potting Compound, Epoxy, Flexible Durometer 75-85
SAE AMS3681C-1995 Adhesive, Electrically Conductive Silver-Filled Epoxy Resin
SAE AMS3671A-1987 PLASTIC MOLDING COMPOUND, NOVOLAC EPOXY RESIN, SHORT GLASS FIBER REINFORCED, STRUCTURAL
SAE AMS3601C-2011 PLASTIC SHEET, COPPER FACED Glass Fabric Reinforced Epoxy Resin
SAE AMS3601-1956 PLASTIC SHEET, COPPER FACED Glass Fabric Reinforced Epoxy Resin
SAE AMS3601A-1958 PLASTIC SHEET, COPPER FACED Glass Fabric Reinforced Epoxy Resin
SAE AMS3692C-1995 Adhesive Compound, Epoxy Resin High Temperature Application
SAE AMS3690C-2009 Adhesive Compound, Epoxy, Room Temperature Curing
SAE AMS3601D-1992 Plastic Sheet, Copper Faced Glass Fabric Reinforced Epoxy Resin Hot Strength Retention
SAE AMS3705A-2014 EPOXY RESIN, CYCLOALIPHATIC LIQUID
SAE AMS3705A-2022 Epoxy Resin, Cycloaliphatic Liquid
SAE AMS3705-2011 EPOXY RESIN, CYCLOALIPHATIC LIQUID

European Committee for Standardization (CEN)

EN ISO 9371:1995 Plastics - Phenolic Resins in the Liquid State or in Solution - Determination of Viscosity (ISO 9371 : 1990)
EN ISO 4895:1999 Plastics - Liquid Epoxy Resins - Determination of Tendency to Crystallize
EN ISO 4895:2014 Plastics - Liquid epoxy resins - Determination of tendency to crystallize (ISO 4895:2014)
EN ISO 3673-1:1999 Plastics - Epoxy Resins - Part 1: Designation ISO 3673-1: 1996
EN ISO 4583:1998 Plastics - Epoxy Resins and Related Materials - Determination of Easily Saponifiable Chlorine Supersedes ISO 4583:1998; Superseded by EN ISO 21627-2:2003

TR-TSE

TS 3397-1979 PLASTICS-EPOXIDE RESINS AND GLYCIDYL ESTERS-DETERMINATION OF INORGANIC CHLORINE
TS 3398-1979 PLASTICS — EPOXIDE RESINS AND RELATED MATERIALS- DETERMINATION OF EASILY SAPONIFIABLE CHLORINE
TS 3198-1978 Plastics-Polyester And Epoxy Casting-Resins Determination O? Total Volume Shrinkage

American Society for Testing and Materials (ASTM)

ASTM D2393-86 Test Method for Viscosity of Epoxy Resins and Related Components

GM Holden Ltd

HOLDEN HN 2186-2000 Adhesive - Epoxy - Two Part

SE-SIS

SIS 16 85 01-1963 Thermosetting resinbonded laminates for industrial use.
SIS SS 16 63 11-1980 Plastics — Determination of viscosity number of PVC resins in dilute solution

The American Road & Transportation Builders Association

AASHTO M 235M/M 235-2013(R2018) Standard Specification for Epoxy Resin Adhesives
AASHTO M 235M/M 235-2013 Standard Specification for Epoxy Resin Adhesives

AASHTO - American Association of State Highway and Transportation Officials

M 235M/M 235-2003 Standard Specification for Epoxy Resin Adhesives
M 235M/M 235-2013 Standard Specification for Epoxy Resin Adhesives

Spanish Association for Standardization (UNE)

UNE-EN ISO 3673-2:2013 Plastics - Epoxy resins - Part 2: Preparation of test specimens and determination of properties of crosslinked epoxy resins (ISO 3673-2:2012)
UNE-EN ISO 3673-1:2000 PLASTICS - EPOXY RESINS - PART 1: DESIGNATION (ISO 3673-1:1996)

Lithuanian Standards Office

LST EN ISO 3673-2:2012 Plastics - Epoxy resins - Part 2: Preparation of test specimens and determination of properties of crosslinked epoxy resins (ISO 3673-2:2012)
LST EN ISO 3673-1:2001 Plastics - Epoxy resins - Part 1: Designation (ISO 3673-1:1996)