Automobile manufacturing related regulations and

Automobile manufacturing related regulations and, Total:334 items.

The international standard classification for "Automobile manufacturing related regulations and" includes: Road vehicle tyres , Recycling , Patents. Intellectual property , Transmissions, suspensions , Road vehicles in general , Electrical and electronic equipment , Internal combustion engines for road vehicles , Flat steel products and semi-products , Special purpose vehicles , Cooling systems. Lubricating systems , Diagnostic, maintenance and test equipment , Occupational safety. Industrial hygiene , Postal services .

The Chinese standard classification for "Automobile manufacturing related regulations and" includes: Marking, packaging, transport and storage , Standardization and Quality Management , Transmission system , Automobiles in general , Electronic and electrical equipment , Automotive engines in general , Tyre , Steel sheet and strip , Basic standards and general methods , Engine body and moving parts , Lubrication and cooling systems; heating devices , Discharge standard for mobile pollution sources , Environmental sanitation , Labor sanitation , Fuel oil , Postal service in general .

国家发展和改革委员会

WB/T 1112-2020 Specification for logistics label of automotive manufacturing parts

Professional Standard - Goods and Materials

WB/T 1112-2021 Specification for logistics label of automotive manufacturing parts

Group Standards of the People's Republic of China

T/CAAMTB 19-2019 Requirements of management system for automobile parts remanufacturing enterprises
T/CAS 681-2023 Capability maturity evaluation requirement of Intelligence manufacturing for vehicle
T/CSAE 257-2022 Technical specifications for remanufacturing of automotive components —Hydraulic brake caliper assembly
T/CRRA 0811-2024 Imported remanufacturable part— Automotive component
T/CRRA 0810-2023 Technical specification for assessment of carbon footprint of remanufactured automotive components — Remanufactured spark and compression ignition engines
T/CACE 001-2018 echnical requirements for remanufacturing of high speed vehicle tyres
T/CSAE 161-2020 Technical specifications for remanufacturing of automotive components— LED headlamp
T/CRRA 0805-2017 Classification for remanufacturable auto parts ——Engine
T/ZGZS 10703-2017 Defining standard for processing / Remanufacturing of scrap automobile parts
T/ZZB 3012-2022 Control switch of motor vehicles-Window regulator
T/ZJEI 006-2023 General Management Requirements for automotive manufacturing equipment on the cloud
T/ZJVIA 004-2023 Test method for automobile parking brake performance (traction method)
T/WJZZ 005-2020 Technical specifications for remanufacturing of automotive components —Spark plug
T/CRRA 0801-2017 Classification for remanufacturable auto parts ——Starter
T/CSAE 256-2022 Technical specifications for remanufacturing of automotive components —Wiper motor
T/CRRA 0802-2017 Classification for remanufacturable auto parts——Generators
T/ZJEI 007-2023 General requirements for data dictionary of automobile manufacturing equipment
T/QGCML 075-2020 Automobile Manufacturing Safety Device Management System
T/CRRA 0804-2017 Classification for remanufacturable auto parts ——Transmission
T/CSAE 333-2023 Control requirement and evaluation method for anti-corrosion quality of automotive manufacturing processes
T/ZJEI 003-2023 Industrial Internet - Automotive manufacturing - General requirements and test methods for on-line 5G-based automotive appearance defect detection applications
T/ZPP 022-2023 Automobile manufacturing intelligent control system requirements
T/CAS 695-2023 Implementation guidance for carbon neutrality in automobile manufacturing enterprise
T/SXQCTB 001-2023 Technical specifications for information security of automobile manufacturing industrial control systems
T/CEEIA 584-2022 Welding specification of aluminum alloy battery tray for new energy vehicles
T/CWAN 0027-2022 Welding specification of aluminum alloy battery tray for new energy vehicles
T/CSAE 160-2020 The technical specifications for remanufacturing of automotive components— Electrical power steering system
T/WSJD 14.2-2022 Ergonomic preventive principles for work-related musculoskeletal disorders Part II Automobile manufacturing operations
T/CRRA 0803-2017 Classification for remanufacturable auto parts ——Steering gear
T/CMISHA 1004-2023 Requirements for safety and validation of equipment and facilities in automobile manufacturing enterprise
T/BTSA 002-2016 Specification of evaluation for automotive component remanufacturers

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 39895-2021 Remanufactured automotive components—Specifications of labels
GB/T 39870-2021 Brand valuation—Automobile manufacturing industry
GB/T 39899-2021 The technical specifications for remanufactured automotive components—Automatic transmission

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 28679-2012 Remanufacturing of automotive components—Assembly
GB/T 28675-2012 Remanufacturing of automotive components—Disassembly
GB/T 17350-2009 Terms marks and designation for special purpose vehicles and special trailers
GB/T 29040-2012 Test methods of rolling resistance for motor vehicle tyres—Single point test and correlation of measurement results
GB/T 28673-2012 The technical specifications for remanufacturing of automotive components—Starter
GB/T 28674-2012 The technical specifications for remanufacturing of automotive components—Steering gear
GB/T 28677-2012 Remanufacturing of automotive components—Cleaning
GB/T 3275-1991 Hot-rolled quality carbon structural steel plates and strips for automobile
GB 18075.1-2012 Health protection zone for manufacturing industry of transportation facilities.Part 1:Automobile industry
GB/T 28678-2012 Remanufacturing of automotive components—Pre-delivery inspection
GB/T 28676-2012 Remanufacturing of automotive components—Classification
GB/T 28672-2012 The technical specifications for remanufacturing of automotive components—Alternator

Professional Standard - Automobile

QC/T 1188-2023 Technical specification for remanufacturing automobile component—Aluminum alloy body cover panel
QC/T 555-2000 Automobile, motorcycle engine the monomer casting piston rings metallographic standards
QC/T 20-1992 Specifications for pneumatic brake light switches for automobiles
QC/T 414-2016 Design rule of color and type code for automotive cables
QC/T 1186-2023 The technical specification for remanufacturing of automobile component —Turbocharger
QC/T 1184-2023 Technical specification for remanufacturing automobile component—Bumper protector accessories
QC/T 553-2008 Metallographic inspection of casting aluminum piston for engines of automobile and motorcycle
QC/T 553-1999 Automobile and motorcycle engines - Metallographic standard of cast aluminum piston
QC/T 492-1999 Code of designation for automobile carburetor and gasoline pump
QC/T 1185-2023 Remanufacturing of automobile component—Technical specification for thermal spray repair

Hainan Provincial Standard of the People's Republic of China

DB46/T 303-2015 Basic norms of safety production management for automobile manufacturing enterprises

Professional Standard-Safe Production

AQ/T 4227-2012 Technical Specification of Occupational Hazard Prevention and Control for Automobile Industry

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 34595-2017 The technical specifications for remanufacturing of automotive components - Water pump
GB/T 35349-2017 Parking brake performance test methods for vehicles
GB/T 34596-2017 The technical specification for remanufacturing of automotive components - Oil pumps

工业和信息化部

QC/T 1074-2017 The technical specification for remanufacturing of automotive components-Cylinder head
QC/T 1140-2020 Technical specifications for remanufactured automotive components- Crankshaft
QC/T 1139-2020 Technical specifications for remanufactured automotive components- Connecting rod
QC/T 1160-2022 Guidelines on evaluation of whole vehicle manufacturing green factory in automobile industry
QC/T 1070-2017 The technical specification for remanufacturing of automotive components-Cylinder block assembly

Hebei Provincial Standard of the People's Republic of China

DB13/T 2979-2019 Regulations on Prevention and Control of Dust and Toxic Hazards in Automobile Manufacturing and Maintenance Industry

Professional Standard - Commodity Inspection

SN/T 4245-2015 Inspection rules of import and export automotive remanufactured components

未注明发布机构

DIN EN 710:1998 Safety requirements for foundry molding and coremaking machinery and plant and associated equipment
AGMA 22FTM03-2022 Aspects of Gear Noise, Quality, and Manufacturing Technologies for Electro Mobility
ASTM ISO/ASTM 52945-2023 Additive manufacturing for automotive — Qualification principles — Generic machine evaluation and specification of key performance indicators for PBF-LB/M processes
DIN EN 45553 E:2018-12 General method for the assessment of the ability to remanufacture energy-related products
SAE USCAR53-2023 Industrial Data Communication for Automotive Manufacturing

未注明发布机构

ASTM ISO/ASTM 52945-2023 Additive manufacturing for automotive — Qualification principles — Generic machine evaluation and specification of key performance indicators for PBF-LB/M processes
DIN EN 45553 E:2018-12 General method for the assessment of the ability to remanufacture energy-related products
AGMA 22FTM03-2022 Aspects of Gear Noise, Quality, and Manufacturing Technologies for Electro Mobility
SAE USCAR53-2023 Industrial Data Communication for Automotive Manufacturing
DIN EN 710:1998 Safety requirements for foundry molding and coremaking machinery and plant and associated equipment

Professional Standard - Environmental Protection

HJ/T 407-2007 Technical guidelines for Environmental Protection in Automobile Manufacturing Capital Construction project for Check and Accept of Completed Project
HJ 971-2018 Technical specification for application and issuance of pollutant permit automotive industry
HJ 1097-2020 Technical Guidelines for Pollution Source Intensity Accounting Automobile Manufacturing
HJ/T 293-2006 Cleaner Production Standard Automobile Manufacturing (Painting)

Beijing Provincial Standard of the People's Republic of China

DB11/ 1227-2023 Emission standard of air pol lutants for automotive manufacturing industry
DB11/T 1322.14-2017 Part 14 of Technical Specifications for Safety Production Level Assessment: Automobile Manufacturing Enterprises
DB11/T 1180-2015 Cleaner production evaluation index system for automobile manufacturing industry
DB11/T 1180-2023 Cleaner Production Evaluation Index System Automobile Manufacturing Industry
DB11/ 1227-2015 Emission Standards of Air Pollutants for Complete Automobile Manufacturing (Painting Process)

Chongqing Provincial Standard of the People's Republic of China

DB50/ 577-2015 Air Pollutant Emission Standards for Surface Coatings in Automobile Manufacturing

Professional Standard - Energy

NB/T 20600-2021 Specifications for the Design and Manufacture of Fuel Assemblies and Related Assemblies of Hualong No.1 Nuclear Power Plant

中华人民共和国国家卫生和计划生育委员会

GB 18075-2000 Health protection zone STANDARD for auto-mobile factory

Professional Standard - Education

JY/T 0458-2014 Specifications for professional instruments and equipment related to automobile operation and maintenance in vocational colleges

Shanghai Provincial Standard of the People's Republic of China

DB31/ 859-2014 Air Pollutant Emission Standards for Automobile Manufacturing (Painting)

中华人民共和国卫生部、中国国家标准化管理委员会

GB/T 18075.1-2012 Health protection zone for manufacturing industry of transportation facilities―Part 1:Automobile industry

Occupational Health Standard of the People's Republic of China

GBZ/T 251-2014 Guidelines for prevention and control of occupational hazard in foundry of automobile manufacturing
GBZ/T(卫生) 251-2014 Guidelines for prevention and control of occupational hazard in foundry of automobile manufacturing

Professional Standard - Petrochemical Industry

SH/T 0713-2002 Standard test method for determination of benzene and toluene in finished motor and aviation gasoline by gas chromatography

Professional Standard - Postal Service

YZ/T 0098-2003 Principle of coding for mail transportation automobile number

Tianjin Provincial Standard of the People's Republic of China

DB12/T 724.14-2021 Part 14 of Technical Specifications for Safety Production Level Assessment: Automobile Manufacturing Enterprises

Professional Standard - Traffic

JT/T 226-1996 Testing specification for automobile brake fluid

Association Francaise de Normalisation

NF EN ISO 21281:2005 Construction and configuration of pedals for seated self-propelled industrial trucks - Rules for construction and configuration of pedals
NF R93-911:1978 EXPANSIBLE CAPS FOR AUTOMOBILE CONSTRUCTION.
NF EN 17115:2018 Entertainment technologies - Specification relating to the design and manufacture of aluminum and steel frames
NF EN ISO/ASTM 52945:2024 Additive manufacturing for automobiles - Qualification principles - Generic machine evaluation and specifications of key performance indicators for PBF-LB/M processes
NF E32-100:1988 Code for construction of steam generators.
NF E32-105:1993 Code for the construction of steam generators - Part V : manufacture.
NF E32-100:1995 Code for construction of steam generators.
NF C05-553*NF EN 45553:2020 General method for assessing the ability of an energy-related product to be remanufactured
NF EN 45553:2020 General method for assessing the ability of an energy-related product to be remanufactured
NF EN ISO 23062:2022 Foundry machinery - Safety requirements for molding and core forming machines and associated equipment
NF R15-504:1972 Endless V belts-geometrical characteristics.
NF EN ISO 18541-5:2018 Road vehicles - Standardization of access to information relating to repair and maintenance for automobiles (RMI) - Part 5: special provisions for heavy utility vehicles
CEN/TR 16884:2016 Automotive fuels - Diesel fuel - Cold operability testing and fuel performance correlation
NF R81-304:1982 Flexible cellular plastics with skin. Sample block for test purposes for automobile construction.
NF EN ISO 10855-2:2018 Offshore containers and associated lifting devices - Part 2: design, manufacture and marking of associated lifting devices

GSO

GSO 1781:2006 Motor vehicles-world manufacturer identifier
GSO ASTM F537:2023 Standard Specification for Design, Fabrication, and Installation of Fences Constructed of Wood and Related Materials
BH GSO ASTM F537:2023 Standard Specification for Design, Fabrication, and Installation of Fences Constructed of Wood and Related Materials

Society of Automotive Engineers (SAE)

SAE J2073-2008 Automotive Starter Remanufacturing Procedures
SAE J292-2008 Snowmobile and Snowmobile Cutter Lamps, Reflective Devices, and Associated Equipment
SAE J292-2014 Snowmobile and Snowmobile Cutter Lamps, Reflective Devices, and Associated Equipment
SAE J292-2021 Snowmobile and Snowmobile Cutter Lamps, Reflective Devices, and Associated Equipment
SAE J2224-2002 Identification of Truck, Trailer, and Bus Wheel Seals and Associated Packaging
SAE J2073-1993 Autmotive Starter Remanufacturing Procedures
SAE J2073-1998 Automotive Starter Remanufacturing Procedures
SAE J2224-2008 Identification of Truck, Trailer, and Bus Wheel Seals and Associated Packaging
SAE J1213B-1988 GLOSSARY OF RELIABILITY TERMINOLOGY ASSOCIATED WITH AUTOMOTIVE ELECTRONICS
SAE J1213/2-1988 GLOSSARY OF RELIABILITY TERMINOLOGY ASSOCIATED WITH AUTOMOTIVE ELECTRONICS
SAE J912-2002 Test Method for Determining Blocking Resistance and Associated Characteristics of Automotive Trim Materials
SAE J912-2023 Test Method for Determining Blocking Resistance and Associated Characteristics of Automotive Trim Materials
SAE J2242-1998 Automotive Starter Solenoid Remanufacturing Procedures
SAE J2242-1993 Automotive Starter Solenoid Remanufacturing Procedures
SAE J2241-1998 Automotive Starter Drive Assembly Remanufacturing Procedures
SAE J2241-1993 Automotive Starter Drive Remanufacturing Procedures
SAE*DINSAESPEC91381-2019 Terms and Definitions Related to Testing of Automated Vehicle Technologies
SAE J2990-2012 Hybrid and EV First and Second Responder Recommended Practice
SAE J2990-1-2016 Hybrid and EV First and Second Responder Recommended Practice
SAE J2990-2019 Hybrid and EV First and Second Responder Recommended Practice
SAE J2990-2-2020 Hybrid and EV First and Second Responder Recommended Practice
SAE J470-1976 WROUGHT NICKEL AND NICKEL-RELATED ALLOYS
SAE J912-2012 Test Method for Determining Blocking Resistance and Associated Characteristics of Automotive Trim Materials

Korean Agency for Technology and Standards (KATS)

KS I 4009-2014 Test methods for remanufactured brake caliper of automobiles
KS R 0024-2013 Glossary of terms relating to brake types, braking mechanics and brake operation of automobiles
KS R 0084-2013 Glossary of Terms Relating to Equipments of Automobiles
KS R 0090-2013 Glossary of terms relating to equipments of automobiles
KS I 4008-2014 Test methods for remanufactured front lower control arm of automobiles
KS I 4010-2014 Test methods remanufactured shock absorber of automobiles
KS I 4029-2018 Test methods of remanufactured cylinder head for passenger cars
KS R 0115-2014 Glossary of terms relating to electric vehicles－Electric motors and controllers
KS I 4005-2014 Test methods for remanufactured clutch cover of automobiles
KS I 4009-2019 Test methods for remanufactured brake calliper of passenger cars
KS I 4019-2017 Test methods of remanufactured vaporizer for LPG automotive
KS I 4006-2014 Test methods for remanufactured turbocharger of automobiles
KS I 4010-2019 Test methods for remanufactured shock absorber of passenger cars
KS I 4002-2014 Test methods for remanufactured starter motors of automobiles
KS R 0114-2014 Glossary of terms relating to electric vehicles－Vehicles
KS R 0089-2013 GLOSSARY OF TERMS RELATINGS TO SEATS OF AUTOMOBILES
KS I 4001-2014 Test methods for remanufactured alternator of automobiles
KS I 4004-2014 Test methods for remanufactured air-conditioner compressor of automobiles
KS R 5063-2013 Exhaust brake switch for automobiles
KS I 4003-2014 Test methods for remanufactured constant velocity joints of automobiles
KS R 5063-1987 Exhaust brake switch for automobiles
KS R 5063-2007(2012) Exhaust brake switch for automobiles
KS R 0034-2013 GLOSSARY OF TERMS RELATING TO AUTOMATIC TRANSMISSION OF AUTOMOBILES
KS R 1064-2005 Automobiles-general rules of test methods of switches
KS R 0085-2013 Glossary of Terms Relating to Automobile Repairing ( Engine and Chassis )
KS I 4007-2014 Test methods for remanufactured diesel injector of automobiles
KS R 3019-2013 Mechanical stop lamp switches for automobiles
KS I 4005-2019 Test methods for remanufactured clutch cover of automobiles
KS R 0116-2014 Glossary of terms relating to electric vehicles-Batteries
KS I 4004-2019 Test methods for remanufactured air-conditioner compressor of passenger cars
KS R 3019-1983 Mechanical stop lamp switches for automobiles
KS R 3019-2008 Mechanical stop lamp switches for automobiles
KS R 0117-2014 Glossary of terms relating to electric vehicles－Chargers
KS R 0033-2013 GLOSSARY OF TERMS RELATING TO MANUAL TRANSMISSION OF AUTOMOBILES
KS I 4003-2019 Test methods for remanufactured constant velocity joints of passenger cars
KS I 4019-2022 Test methods of remanufactured vaporizer for LPG automotive
KS R 1064-2005(2020) Automobiles-general rules of test methods of switches
KS I 4007-2019 Test methods for remanufactured diesel injector of automobiles
KS M ISO 28580-2016(2021) Passenger car, truck and bus tyres－Methods of measuring rolling resistance－Single point test and correlation of measurement results
KS M ISO 28580:2022 Passenger car, truck and bus tyre rolling resistance measurement method — Single point test and correlation of measurement results
KS R 1064-2020 Automobiles-general rules of test methods of switches
KS R 1064-1995 Automobiles-general rules of test methods of switches
KS I 4018-2017(2022) Test methods of remanufactured mixer for LPG automotive
KS I 4019-2017(2022) Test methods of remanufactured vaporizer for LPG automotive
KS M 2407-2003 Test method for determination of aromatics in finished gasoline by gas chromatography
KS R 1009-1986 Brake test method of automobiles
KS R 1009-2006(2011) Brake test method of automobiles
KS M 2408-2003 Test method for determination of oxygenates in gasoline by gas chromatography
KS R 1169-2009 Test method for automotive electric parking brake control equipments
KS R 1100-2005(2020) Test procedure of porosity for brake linings andpads of automobiles

JSAE - Society of Automotive Engineers of Japan@ Inc.

JASO D507-1-2004 Automotive Parts - Antenna for vehicle - Glossary of terms relating to car antenna
JASO Z202-1997 Glossary of Terms Relating to Pipe Fittings for Automobiles
JASO D803-1996 Glossary of Terms Relating to Diagnosis for Electronic Systems of Automobiles
JASO D805-2000 Automobile Parts-Glossary of Terms Relating to Electrical and Optical Connectors
JASO M104-1986 Testing Methods for Automobile Brake Tube

US-DOT

DOT 49 CFR PART 529-2010 MANUFACTURERS OF MULTISTAGE AUTOMOBILES
DOT 49 CFR PART 538-2010 MANUFACTURING INCENTIVES FOR ALTERNATIVE FUEL VEHICLES

SE-SIS

SIS SMS 874-1964 Design, manufacture and assembly bricks for automobile bodies

Japanese Industrial Standards Committee (JISC)

JIS D 0110:1988 Glossary of terms relating to equipments of automobiles
JIS D 0108:1985 Glossary of terms relating to control of air pollutions from automobile emissions
JIS D 0111:1992 Glossary of terms relating to suspension of automobiles
JIS D 0104:1986 Glossary of terms relating to main systems of automobiles
JIS D 0208:1993 Automobiles -- General rules of test methods of switches
JIS D 0210:1995 General rules of brake test method of automobiles and motor cycles
JIS D 0210:2022 General rules of brake test method of automobiles and motor cycles

German Institute for Standardization

DIN 70024-3:1990 Terminology associated with components of motor vehicles and their towed vehicles; braking equipment
DIN EN 45553:2020-11 General method for the assessment of the ability to remanufacture energy-related products; German version EN 45553:2020
DIN EN ISO 23062:2019-09 Foundry machinery - Safety requirements for molding and coremaking machinery and associated equipment (ISO/DIS 23062:2019); German and English version prEN ISO 23062:2019 / Note: Date of issue 2019-07-26*Intended as replacement for DIN EN 710 (2010-10)...
DIN EN ISO/ASTM 52945:2024-04 Additive manufacturing for automotive - Qualification principles - Generic machine evaluation and specification of key performance indicators for PBF-LB/M processes (ISO/ASTM 52945:2023); German version EN ISO/ASTM 52945:2024
DIN EN ISO/ASTM 52945:2022-08 Additive manufacturing for automotive - Qualification principles - Generic machine evaluation and specification of key performance indicators for PBF-LB/M processes (ISO/ASTM DIS 52945:2022); German and English version prEN ISO/ASTM 52945:2022 / Note: ...
DIN ISO 7647:1987 Commercial vehicles and buses; gearbox flanges; type S; identical with ISO 7647, edition 1986
DIN ISO 7646:1987 Commercial vehicles and buses; gearbox flanges; type A; identical with ISO 7646, edition 1986

RU-GOST R

GOST 5267.0-1990 Hot-rolled sections for car building. General specifications
GOST 8320.8-1983 Periodic sections produced by cross-helical rolling for automobile building. Dimensions
GOST R 51814.1-2004 Quality management systems for automotive industry. Particular requirements for the application of ISO 9001:2000 for automotive production and relevant service part organizations / Note: To be replaced by GOST R 51814.1 (2009).
GOST R 51814.1-2001 Quality systems for automotive industry. Quality systems for supplier organizations of automotive industry. General requirements
GOST 34725-2021 Automotive products recall. Guidelines for manufacturers, suppliers and sellers

SAE - SAE International

SAE R-410-2012 Onboard Diagnostics and Measurement in the Automotive Industry@ Shipbuilding@ and Aircraft Construction
SAE R-457-2017 Manufacturing System and Process Development for Vehicle Assembly
SAE J2224-1994 Identification of Truck@ Trailer@ and Bus Wheel Seals and Associated Packaging@ Information Report (October 1994)
SAE J2224-2015 Identification of Truck@ Trailer@ and Bus Wheel Seals and Associated Packaging
SAE J1213-1988 Glossary of Vehicle Network for Multiplexing and Data Communications
SAE J1213-1996 Glossary of Automotive Electronic Terms
SAE J912-1994 Test Method for Determining Blocking Resistance and Associated Characteristics of Automotive Trim Materials@ Standard
SAE J912A-1972 Test Method for Determining Blocking Resistance and Associated Characteristics of Automotive Trim Materials

British Standards Institution (BSI)

BS PAS 3100:2014 Remanufactured automotive parts. Specification for a process control system
PAS 3100:2014 Remanufactured automotive parts. Specification for a process control system
PAS 777:2013 Specification for the qualification and labelling of used automotive engines and any related transmission units
BS ISO/ASTM 52921:2013 Standard terminology for additive manufacturing. Coordinate systems and test methodologies
ASTM ISO/ASTM 52945-23 Additive manufacturing for automotive. Qualification principles. Generic machine evaluation and specification of key performance indicators for PBF-LB/M processes
BS EN 1646-1:2018 Leisure accommodation vehicles. Motor caravans. Habitation requirements relating to health and safety
BS PAS 777:2013 Specification for the qualification and labelling of used automotive engines and any related transmission units
BS EN 45553:2020 General method for the assessment of the ability to remanufacture energy-related products
BS EN ISO 14644-4:2001 Cleanrooms and associated controlled environments. Design, construction and start-up
BS 8487:2007+A1:2013 The design and construction of gas boosters used in association with combustion equipment - Specification

KR-KS

KS R 0113-2023 Road vehicles — Glossary of terms relating to electric vehicles
KS M 2455-2003(2023) Automotive gasoline olefin test method (gas chromatography method)
KS M ISO 28580-2022 Passenger car, truck and bus tyre rolling resistance measurement method — Single point test and correlation of measurement results
KS M ISO 28580-2016 Passenger car, truck and bus tyres－Methods of measuring rolling resistance－Single point test and correlation of measurement results

Canadian General Standards Board （CGSB)

CAN/CGSB-3.0 NO.19.5-2011 Methods of testing petroleum and associated products Determination of lead in automotive gasoline (Atomic absorption)
CGSB 3.0 NO. 19.5-04-CAN/CGSB-2004 Methodes D'Essai Des Produits Petroliers Et Produits Connexes Dosage Du Plomb Dans L'Essence Pour Automobiles (Spectrophotometrie D'Absorption Atomique)
CGSB 3.0 NO. 14.3-99-CAN/CGSB AMD 1-2004 Methods of Testing Petroleum and Associated Products Standard Test Method for the Identification of Hydrocarbon Components in Automotive Gasoline Using Gas Chromatography
CAN/CGSB-3.0 NO.14.3-2016 Methods of testing petroleum and associated products Standard test method for the identification of components in automotive gasoline using gas chromatography

CU-NC

NC 18-64-1986 Goods and Passenger Transport. Noise Emitted by Vehicles. Testing Methods

HU-MSZT

MSZ 18743-1979 Brake light switch. For automotive fluid brakes
MSZ 5933/25.lap-1963 Ordinary customized fireproof square brick shapes and sizes. Pipe manufacturing related bricks

ES-AENOR

UNE 69-001-1990 Related terms and definitions of automobile tires
UNE 26-120-1986 Bearings for the automotive industry. Automatic lubricating metal sintering manufacturing. Specification control

PT-IPQ

NP EN 590-2002 Automotive fuels Diesel Requirements and test methods
NP 228-1988 Liquid petroleum products Unleaded petrol. Specification

IN-BIS

IS 5439-1978 Automotive oil pressure switch specifications
IS 4061-1967 Specifications for automobile headlight switches
IS 9432-1980 Specification for ignition switches for automobiles
IS 4050-1976 Car horn switch test method
IS 9521-1980 Specification for push-button switches for automobiles
IS 9433-1980 Specification for piano key switches for automobiles
IS 4373-1967 Specification for hydraulically operated brake light switches for automobiles
IS 3431-1982 Specification for steel for the manufacture of volute springs, coil springs and laminated springs for automobile suspensions
IS 2742-1964 Specification for automotive brake linings
IS 9854-1981 Milk truck manufacturing specifications
IS 11098-1984 Specification for combination switch mounted on automobile steering column
IS 4062-1986 Specifications for foot-operated headlight DIP switches for automobiles

AT-ON

ONORM V 5433-1966 Nicht angegebene Einzelheiten sind zweckentsprechend zu w?hlen.
ONORM V 5411-1950 Direction of rotation for automotive manufacturing, electrical machinery and devices

American Society for Testing and Materials (ASTM)

ASTM F3674-24 Standard Practice for Additive Manufacturing – Part Grades for Automotive
ASTM ISO/ASTM52945-23 Additive manufacturing for automotive — Qualification principles — Generic machine evaluation and specification of key performance indicators for PBF-LB/M processes
ASTM F537-01 Standard Specification for Design, Fabrication, and Installation of Fences Constructed of Wood and Related Materials
ASTM F537-01(2019) Standard Specification for Design, Fabrication, and Installation of Fences Constructed of Wood and Related Materials
ASTM E2475-10 Standard Guide for Process Understanding Related to Pharmaceutical Manufacture and Control
ASTM E2475-10(2016) Standard Guide for Process Understanding Related to Pharmaceutical Manufacture and Control
ASTM E2363-23 Standard Terminology Relating to Manufacturing of Pharmaceutical and Biopharmaceutical Products in the Pharmaceutical and Biopharmaceutical Industry

SCC

BS EN ISO /ASTM 52945:2024 Additive manufacturing for automotive. Qualification principles. Generic machine evaluation and specification of key performance indicators for PBF-LB/M processes
DANSK DS/ISO/ASTM 52945:2024 Additive manufacturing for automotive – Qualification principles – Generic machine evaluation and specification of key performance indicators for PBF-LB/M processes
AS R27:1965 Glossary of terms relating to the manufacture and use of refractory materials
SN-CR 1955:1995 Proposals for the braking of electrical vehicles
CAN/CGSB-3.0 No./No.19.5-M89-1989 Methods of Testing Petroleum and Associated Products Determination of Lead in Automotive Gasolines (Atomic Absorption)
DIN SAE SPEC 91381:2019 Terms and Definitions Related to Testing of Automated Vehicle Technologies; Text in German and English
NS-EN 45553:2020 General method for the assessment of the ability to remanufacture energy-related products
DANSK DS/EN 45553:2020 General method for the assessment of the ability to remanufacture energy-related products
SAE DINSPEC91381-2019 Terms and Definitions Related to Testing of Automated Vehicle Technologies
CEI UNI EN 45553:2021 General method for the assessment of the ability to remanufacture energy-related products
SAE DINSAESPEC91381-2019 Terms and Definitions Related to Testing of Automated Vehicle Technologies
08/30162351 DC BS ISO 28580. Passenger car, truck and bus tyres. Methods of measuring rolling resistance. Single point test and correlation of measurement results
DANSK DS/CEN/TR 16884:2016 Automotive fuels - Diesel fuel - Cold operability testing and fuel performance correlation
CAN/CGSB-3.0 Nº 14.3-2022 Methods of testing petroleum and related products Standard method for identifying the constituents of motor gasoline by gas chromatography
CAN/CGSB-3.0 Nº 14.3-2016 Methods of testing petroleum and related products Standard method for identifying the constituents of motor gasoline by gas chromatography
SN-CEN/TR 16884:2016 Automotive fuels — Diesel fuel — Cold operability testing and fuel performance correlation
NS-EN 710:1997+A1:2010 Safety requirements for foundry moulding and coremaking machinery and plant associated equipment
UNE-EN 710:1998 SAFETY REQUIREMENTS FOR FOUNDRY MOULDING AND COREMAKING MACHINERY AND PLANT AND ASSOCIATED EQUIPMENT.
NS-EN 710:1997 Safety requirements for foundry moulding and coremaking machinery and plant and associated equipment
BS EN 710:1998 Safety requirements for foundry moulding and coremaking machinery and plant and associated equipment
CAN/CGSB-3.0 N° 19.5-2011(C2022) Methods of testing petroleum and related products - Determination of lead in automobile gasoline (atomic absorption)
NS-EN ISO/ASTM 52945:2024 Additive manufacturing for automotive - Qualification principles - Generic machine evaluation and specification of key performance indicators for PBF-LB/M processes (ISO/ASTM 52945:2023)
PLUS 1146:2000 Guide to ISO 14001 Implementation in the Automotive Parts Manufacturing Sector
CAN/CGSB-3.0 No. 19.5-2011(R2022) Methods of Testing Petroleum and Associated Products - Determination of Lead in Automotive Gasoline (Atomic Absorption)
CAN/CGSB-3.0 No.19.5-1995 Methods of Testing Petroleum and Associated Products Determination of Lead in Automotive Gasoline (Atomic Absorption)
CAN/CGSB-3.0 No. 19.5-2004 Methods of Testing Petroleum and Associated Products Determination of Lead in Automotive Gasoline (Atomic Absorption)
BS PD CEN/TR 16884:2016 Automotive fuels. Diesel fuel. Cold operability testing and fuel performance correlation
ISO 2790:1982 Narrow V-belt drives for automobile manufacturing — Dimensions
DIN EN 45553 E:2018 Draft Document - General method for the assessment of the ability to re-manufacture energy related products; German and English version prEN 45553:2018
CAN/CGSB 3.0 No.19.5-2004 Méthodes d'essai des produits pétroliers et produits connexes - Dosage du plomb dans l'essence pour automobiles (spectrophotométrie d'absorption atomique)
CAN/CGSB 3.0 No.19.5-1995 Methods for testing petroleum and related products - Determination of lead in automobile gasoline (atomic absorption spectrophotometry)
AS 2359.1:1980 Design, manufacture and operation of industrial trucks (known as the SAA industrial truck code) - Design and manufacture
BS 970-2:1988 Specification for wrought steels for mechanical and allied engineering purposes-Requirements for steels for the manufacture of hot formed springs
CAN/CGSB-3.0 No. 14.3-2022 Methods of testing petroleum and associated products Standard test method for the identification of components in automotive gasoline using gas chromatography
CAN/CGSB-3.0 No. 14.3-2016 Methods of testing petroleum and associated products Standard test method for the identification of components in automotive gasoline using gas chromatography
DIN EN ISO /ASTM 52945 E:2022 Draft Document - Additive manufacturing for automotive - Qualification principles - Generic machine evaluation and specification of key performance indicators for PBF-LB/M processes (ISO/ASTM DIS 52945:2022); German and English version prEN ISO/ASTM 52...

International Organization for Standardization (ISO)

ISO/ASTM 52945:2023 Additive manufacturing for automotive — Qualification principles — Generic machine evaluation and specification of key performance indicators for PBF-LB/M processes
ISO/FDIS 22915-16:2024 Industrial trucks

ES-UNE

ISO/ASTM FDIS 52945:2023 Additive manufacturing for automotive — Qualification principles — Generic machine evaluation and specification of key performance indicators for PBF-LB/M processes
UNE-EN 45553:2021 General method for the assessment of the ability to remanufacture energy-related products
UNE-CEN/TR 16884:2016 Automotive fuels - Diesel fuel - Cold operability testing and fuel performance correlation (Endorsed by AENOR in May of 2016.)
UNE-EN 710:1998+A1:2011/AC:2012 Safety requirements for foundry moulding and coremaking machinery and plant associated equipment

US-FCR

FCR 49 CFR PART 538-2011 MANUFACTURING INCENTIVES FOR ALTERNATIVE FUEL VEHICLES

DE-GPVA

AD 2000-Merkblatt HP0-2013 Manufacture and testing of pressure vessels. General principles of design, manufacture and associated tests

PL-PKN

PN-EN 45553-2021-04 E General method for the assessment of the ability to remanufacture energy-related products

IT-UNI

UNI CEI EN 45553-2021 General method for the assessment of the ability to remanufacture energy-related products

CENELEC - European Committee for Electrotechnical Standardization

PREN 45553-2018 General method for the assessment of the ability to re-manufacture energy related products

AIAG - Automotive Industry Action Group

D-10-1998 Applicability of STEP to Automotive Design and Manufacturing (Version 1)

US-CFR-file

CFR 49-579.22-2014 Transportation. Part579:Reporting of information and communications about potential defects. SubpartC:Reporting of early warning information. Section579.22:Reporting requirements for manufacturers of 100 or more buses, manufacturers of 500 or more emergen

DE-VDA

VDA 237-102-2013 Test methods for artificial leather for the automotive industry

API - American Petroleum Institute

API 4002-1967 U.S. MOTOR GASOLINE ECONOMICS VOLUME 1 MANUFACTURE OF UNLEADED GASOLINE (Volume 1)

CO-ICONTEC

ICONTEC 1501-1979 Automobiles, international code used to identify the manufacturer

DIN

DIN EN ISO /ASTM 52945:2024 Additive manufacturing for automotive - Qualification principles - Generic machine evaluation and specification of key performance indicators for PBF-LB/M processes (ISO/ASTM 52945:2023); German version EN ISO/ASTM 52945:2024

Standard Association of Australia （SAA）

AS 1580.203.1:2004 Paints and related materials - Methods of test - Skin formation

EU/EC - European Union/Commission Legislative Documents

2014/40/EU-2014 DIRECTIVE OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL on the approximation of the laws@ regulations and administrative provisions of the Member States concerning the manufacture@ presentation and sale of tobacco and related products and repealing Direct

IX-EU/EC

EEC/684/92-1992 Council Regulation on Common Rules for the International Carriage of Passengers by Coach and Bus

European Committee for Standardization (CEN)

prEN ISO/ ASTM 52945 Additive manufacturing for automotive - Qualification principles - Generic machine evaluation and specification of key performance indicators for PBF-LB/M processes (ISO/ASTM DIS 52945:2022)
DD ENV 13730-2-2002 Healthcare informatics - Blood transfusion related messages - Part 2: Production related messages (BTR-PROD)
PD CEN/TR 16884:2016 Automotive fuels - Diesel fuel - Cold operability testing and fuel performance correlation

ZA-SANS

SANS 20013:2009 Uniform provisions concerning the approval of vehicles of categories M, N and O with regard to braking

VDI - Verein Deutscher Ingenieure

VDI/VDE 3523-1981 Rules for acceptance test of steamturbines control systems

Others: