hb 2014

hb 2014, Total:271 items.

The international standard classification for "hb 2014" includes: .

The Chinese standard classification for "hb 2014" includes: Cutters , Cutting tools .

Professional Standard - Aviation

HB/Z 20019-2014 Process for riveting for titanium alloy rivet
HB 8503-2014 Pressure drop test methods for fuel system components of civil aircraft
HB 8493-2014 Design requirements for cabin door and emergency exit of civil aircraft
HB 8487-2014 General requirements for airframe icing protection of civil aircraft
HB 7308-1996 Interference Thread Machine and Hand Screw Tap for HB 6545-91AG and BG Thread d=3~4mm p=0.5~0.7mm
HB 8435-2014 General specification for flight control computer system of civil aircraft
HB 4585-1992 Template and reference template for eight-tooth end milling cutter slot milling cutter For inspecting HB 4584-92 slot milling cutter
HB 2368-1977 Machine and hand taps for processing heat-resistant steel through-hole HB 241-75 threads d=1~3.5mm
HB 8398-2014 Specification for the emergency evacuation slides,ramps and rafts of civil aircraft
HB 6918-1994 Four-tooth rough machining end mill slot milling cutter sample and proofreading sample testing HB 6917-94 slot milling cutter
HB 8418-2014 Requirements for flight test of civil aircraft oxygen system
HB 8491-2014 Design requirements for cargo fireproofing of civil aircraft
HB 2364-1977 Spiral fluting machine for processing light alloy non-through hole HB 241-75 thread, hand tap d=3~3.5mm
HB 8430-2014 Requirements for standardization review of civil airplane
HB 2405-1977 HB 243-70 AG, BG thread plug gauge d=6~30mm
HB 741-1992 Template and Reference Template Used for Slot Milling Cutter of Expanding Drill of Four-tooth-set Type for Inspecting HB 734-92 Slot Milling Cutter
HB 6167.17-2014 Environmental conditions and test procedures for airborne equipment of civil airplane-Part 17:Magnetic effect test
HB 8492-2014 Design requirements for openable window of civil airplane
HB 2419-1977 Appraisal of HB 243-70 threaded band watch comb-shaped caliper wear pair watch parts d=3~6mm
HB 8448-2014 General specification for the head-up display of civil aircraft
HB 741-1979 Four-tooth sleeve type reaming drilling slot milling cutter sample and proofreading sample testing HB 734-92 slot milling cutter
HB 8400-2014 Requirement for installation and test of civil aircraft fuel system
HB 8477-2014 Specification for GRT series of 500℃ circular electrical connector of aircraft
HB 5299.3-2014 Qualification and certification of welding manipulating personnel for aviation industries.Part 3: Soldering and brazing
HB 2390-1977 Thread rolling plate for HB 241-75, HB 242-70 thread d=2~6mm t=0.35~2mm
HB 8440-2014 Requirements for digital equipment for measurements of civil aircraft electrical power characteristics
HB 4588-1992 Template and reference template for two-tooth end milling cutter for machining light alloy For inspecting HB 4587-92 slot milling cutter
HB 8391-2014 Requirements for flight test of civil aircraft avionics system
HB 8458-2014 Preparation for statement of work for civil airplane development program
HB 8449-2014 General design requirement for landing gear structures of civil aircraft
HB 8485-2014 Requirements for fault isolation in environmental control system of civil aircraft
HB 5470-2014 Requirements of burning performance for cabin interior nonmetallic material of civil aircraft
HB 8495-2014 Design requirements for passenger boarding stairways of civil aircraft
HB 6928-1994 Three-tooth rough machining end mill with back-side tool sample and proofreading sample for testing HB 6927-94 slot milling cutter
HB 2381-1977 HB 241-75, HB 242-70 thread rolling wheels for ordinary and ordinary clearance threads d=2~33mm t=0.35~2mm
HB 2385-1977 Thread rolling shaft for rolling HB 241-75, HB 242-70 threads d=2~33mm t=0.35~2mm
HB 2406-1977 HB 243-70 AG, BG thread group plug gauge d=3~5mm
HB 8488-2014 General requirements of civil aircraft water system
HB 7484-2014 Requirement for cabin lighting of civil aircraft
HB/Z 261-2014 Guide for drafting EMC test report
HB/Z 20027.6-2014 Laser shock peening.Part 6: Stainless steel weld seam
HB/Z 420-2014 Assurance guidance for civil aircraft electronic hardware certification
HB 2380-1977 HB 241-75, HB 242-70 thread rolling wheels for ordinary and ordinary clearance threads d=2~45mm t=0.35~2mm
HB 2388-1977 Thread rolling shaft for rolling HB 243-70 thread rolling wheel d=36~45mm t=1.5mm
HB 6167.25-2014 Environmental conditions and test procedures for airborne equipment of civil airplane.Part 25: Lightning direct effects test
HB 4594-1992 Template and Reference Template for Shell End Milling Cutter Slot Milling Cutter for Inspecting HB 4593-92 Slot Milling Cutter
HB/Z 20025-2014 Process of skin stretch forming with flexible multi-point die
HB 8486-2014 General requirements for environmental control system test of civil aircraft
HB 4652-1992 Template and Checking Template
HB 8420-2014 Specification for DM02 master alloys for high temperature die material
HB 2404-1977 HB 243-70 AG, BG thread plug gauge d=3~5mm
HB 8500-2014 Design and installation requirements for pneumatic system of civil aircraft
HB 2377-1977 Nut tap d=4~7mm for processing heat-resistant steel HB 241-75 thread
HB 6167.7-2014 Environmental conditions and test procedures for airborne equipment of civil airplane.Part 7: Explosive atmosphere test
HB 8480-2014 Specification for static electric power inverters of civil aircraft
HB 7735-2014 Nomination for aero-derivative gas turbine and turnkey installation
HB 6167.11-2014 Environmental conditions and test procedures for airborne equipment of civil airplane.Part 11: Fungus test
HB 8469-2014 General specification for flight warning computer of civil aircraft
HB 2399-1977 HB 242-70 Thread Calibration Plug Gauge Calibration-Stop TZ, Calibration-Loss TS, Verification-Pass TY d=6~48mm
HB 2378-1977 Nut tap d=8~11mm for processing heat-resistant steel HB 241-75 thread
HB 8442-2014 General requirements for oxygen supply system of civil aircraft
HB 8412-2014 Electrical bonding requirement for civil aircraft systems
HB 8403-2014 General requirements for civil aircraft fuel system
HB 4583-1992 Template and reference template for six -tooth end milling cutter slot milling cutter For inspecting HB 4582-92 slot milling cutter
HB 2379-1977 Nut taps for processing heat-resistant steel HB 241-75 threads d=12~36mm
HB/Z 85 COR 1984 Corrigendum to HB/Z85-84
HB 2414-1977 HB 243-70 threaded comb gauge d=3~30mm
HB 8393-2014 Specification for the pilot seat and restraint system in civil aircraft
HB 6939-1994 Template and Proofreading Template for Double-gear Bulb End-milling Cutter Excentric-back Cutter - Slot Cutter Inspection of HB 6938-94
HB 8389-2014 Management requirements for civil aircraft supplier
HB 2387-1977 Thread rolling shaft for rolling HB 243-70 thread rolling wheel d=3~33mm t=0.5~0.5mm
HB 2423-1978 Hand tap for processing HB 243-70 AG interference thread d=3~5mm
HB 7496-2014 Visibility from the flight deck of civil aircraft
HB 8423.2-2014 Method for visual spectroscopic analysis of metal materials.Part 2: The visual spectroscopic method of identifying titanium alloys
HB 2357-1977 No-groove machine for processing light alloy through hole HB 241-75 thread, hand tap d=4~7mm
HB 2426-1978 Machine tap d=3~5mm for processing HB 243-70 AG interference thread
HB 7242-1995 General specification for aircraft engine installation vehicle HB
HB 8443-2014 Civil aircraft avionics integrity program requirements
HB 6921-1994 Slot milling cutter for two-tooth roughing end mill for HB 6910-94 HB 6913-94.D=45~63mm
HB 2365-1977 Spiral fluting machine for processing light alloy non-through hole HB 241-75 thread, hand tap d=4~7mm
HB 2362-1977 Machine and hand taps d=8~11mm for processing light alloy non-through hole HB 241-75 thread
HB 2395-1977 HB 242-70 Thread Calibration Plug Gauge Calibration-Through TT d=6~48mm
HB 2367-1977 Spiral fluting machine for processing light alloy non-through hole HB 241-75 thread, hand tap d=10~20mm
HB 2398-1977 HB 242-70 Thread Calibration Plug Gauge Calibration-Stop TZ, Calibration-Loss TS, Verification-Pass TY d=1~5mm
HB 6923-1994 Two-tooth rough machining end mill with back cutter for HB 6910~94 HB 6913-94.D=56~63mm
HB 2359-1977 No-groove machine for processing light alloy through hole HB 241-75 thread, hand tap d=10~36mm
HB 2360-1977 Machine and hand taps d=1~3.5mm for machining light alloy non-through hole HB 241-75 thread
HB 8426-2014 Core metadata for aviation product
HB 8506-2014 Test requirements for commercial aircraft hydraulic systems
HB 8432-2014 Requirements for ground support electrical supplies characteristic of civil aircraft
HB 2425-1978 Hand tap for processing HB 243-70 AG interference thread d=8~30mm
HB 2394-1977 HB 242-70 Thread Calibration Plug Gauge Calibration-Through TT d=1~5mm
HB 2372-1977 Machine and hand taps d=1~3.5mm for machining heat-resistant steel non-through hole HB 241-75 thread
HB 2392-1977 HB 242-70 threaded end ring gauge d=1~100mm
HB 5469-2014 Burning test method for cabin interior nonmetallic material of civil aircraft
HB 6167.16-2014 Environmental conditions and test procedures for airborne equipment of cifvil airplane-Part 16:Acceleration test
HB 2363-1977 Machine and hand taps d=12~36mm for processing light alloy non-through hole HB 241-75 thread
HB 7315-1996 Interference Thread Machine and Hand Screw Tap for HB 6545-91 CG and DG Thread d=33~39mm p=1.5mm
HB 2386-1977 Thread rolling shaft for rolling HB 241-75, HB 242-70 thread rolling wheel d=36~45mm t=1.5~2mm
HB 6167.8-2014 Environmental conditions and test procedures for airborne equipment of civil airplane-Part 8;Waterproofness tset
HB 7310-1996 Interference Thread Machine and Hand Screw Tap for HB 6545-91 AG and BG Thread d=12~30 p=1.25~1.5mm
HB 6167.9-2014 Environmental conditions and test procedures for airborne equipment of civil airplane-Part 9:Fluids susceptibility test
HB 4577-1992 Template and reference template for two-tooth end milling cutter slot milling cutter For inspecting HB 4576-92 slot milling cutter
HB 6167.13-2014 Environmental conditions and test procedures for airborne equipment of civil airplane.Part 13: Icing test
HB 2370-1977 Machine and hand taps for processing heat-resistant steel through-hole HB 241-75 threads d=8~11mm
HB 6919-1994 Slot milling cutter for six-tooth roughing end mill for HB 6906-94 HB 6909-94.D=55~75mm
HB 6920-1994 Six-tooth rough machining end mill slot milling cutter sample and proofreading sample testing HB 6919-94 slot milling cutter
HB 8450-2014 General requirements for pneumatic systems of civil aircraft
HB 7477-2014 Qualification and certification of physical metallurgy testing personnel for aviation industry
HB 8455-2014 Requirements of damage tolerance for civil airplane
HB 8482-2014 Specification for continuous flow oxygen regulator of civil aircraft
HB 8472-2014 General requirements for flight test of civil aircraft
HB 6167.23-2014 Environmental conditions and test procedures for airborne equipment of civil airplane.Part 23: Emission of radio frequency energy test
HB 6167.20-2014 Environmental conditions and test procedures for airborne equipment of civil airplane-Part 20:Audio frequency conducted susceptibility-Power input
HB 8463-2014 Requirements of three-dimensions annotated model for aviation products
HB 8499-2014 General requirements for pneumatic system components of civil aircraft
HB 2428-1978 Machine tap d=8~20mm for processing HB 243-70 AG interference thread
HB 8446-2014 General requirements of mock-up for civil aircraft
HB 2418-1977 HB 243-70 Comb-shaped caliper with threaded table d=7~30mm
HB 8497-2014 Design requirements for emergency evacuation equipmemt in the flight deck of civil aircraft
HB 8505-2014 Design requirements for commercial aircraft fuel system
HB 6941-1994 Template and Proofreading Template for Four-gear Bulb End-milling Cutter Slot Cutter - for Inspection of Slot Cutter in HB 6940-94
HB 7309-1996 Interference Thread Machine and Hand Screw Tap for HB 6545-91 AG and BG Thread d=5~10mm p=0.8~1.5mm
HB 8438-2014 General requirements of composite structure design for civil airplane
HB 8478-2014 General requirements for TVS transient protection connectors
HB 6917-1994 Slot milling cutter for four-tooth roughing end mill for HB 6904~6905-94 HB 6907~6908-94.D=40~63mm
HB 8439-2014 General specification for civil aircraft autopilot
HB 8460-2014 Requirements for acceptance level and control level of contamination of civil aircraft hydraulic systems
HB 6925-1994 HB 6911~6912-94 HB 6914~6915-94.D=63~80mm for slot milling cutter for three-tooth rough machining end mill
HB 6167.5-2014 Environmental conditions and test procedures for airborne equipment of civil airplane-Part 5:Operational shocks and crash safety test
HB 2407-1977 HB 243-70 AG, BG thread group plug gauge d=6~30mm
HB 2421-1977 HB 243-70 threaded comb-shaped caliper for watch parts application size d=3~30mm
HB 8436-2014 Design and installation requirements for flight control system of civil aircraft
HB 2397-1977 HB 242-70 Thread Calibration Plug Gauge Calibration-Through TT d=105~150mm
HB 8471-2014 Requirements for flight test of civil aircraft flight control system
HB 8470-2014 Ground test requirements for flight control system of civil aircraft
HB 6936-1994 Slot Cutter for Two-gear Bulb End-milling Cutter, Applicable to HB 6929-94 HB 6932-94 D=40~63mm
HB 7044-2014 Requirement for fire testing of flexible hose and tube assemblies of commercial aircraft
HB 8424-2014 Leak test method for sealing of aviation components
HB 2373-1977 Machine and hand taps for processing HB 241-75 threads with non-through holes in heat-resistant steel d=4~7mm
HB 2401-1977 HB 242-70 Thread Calibration Plug Gauge Calibration-Stop TZ, Calibration-Loss TS, Verification-Pass YT d=105~150mm
HB 6167.14-2014 Environmental conditions and test procedures for airborne equipment of civil airplane-Part 14:Fire flammability test
HB 8421-2014 Specification for sheathed thermocouple cable for aviation
HB 4579-1992 Template and reference template for three -tooth end milling cutter slot milling cutter For inspecting HB 4578-92 slot milling cutter
HB 7312-1996 Interference Thread Machine and Hand Screw Tap for HB 6545-91 AG and BG Thread d=42~45mm p=1.5mm
HB 6938-1994 Excentric-back Cutter for Double-gear Bulb End-milling Cutter Used for HB 6929-94 and HB 6932-94 D=56~63mm
HB 2412-1977 HB 243-70 CG thread group plug gauge d=6~30mm
HB 6167.21-2014 Environmental conditions and test procedures for airborne equipment of civil airplane-Part 21:Induced signal susceptibility test
HB 743-1977 Tap slot milling cutter sample and proofreading sample testing HB 736-92 slot milling cutter
HB 8467-2014 General requirements for civil aircraft electrical equipments installation
HB 8429-2014 Drafting requirements for standardization program of civil airplane
HB 2356-1977 No-groove machine for processing light alloy through hole HB 241-75 thread, hand tap d=1~3.5mm
HB 8456-2014 Technical reviews in development phase of civil airplane
HB 8447-2014 General requirements of structure anticorrosion design for civil airplane
HB/Z 421-2014 Assurance guidance for software in airborne systems and equipment certification for civil aircraft
HB 2400-1977 HB 242-70 Thread Calibration Plug Gauge Calibration-Stop TZ, Calibration-Loss TS, Verification-Pass TY d=52~100mm
HB 4581-1992 Template and reference template for four -tooth end milling cutter slot milling cutter For inspecting HB 4580-92 slot milling cutter
HB 6937-1994 Template and Proofreading Template for Double-gear Bulb End-milling Cutter Slot Cutter - Slot Cutter Inspection of HB 6936-94
HB 8445-2014 General requirements of the freight systems for the civil airplane
HB 2416-1977 HB 243-70 threaded comb-shaped caliper with table active measuring head d=3~30mm
HB 6167.15-2014 Environmental conditions and test procedures for airborne equipment of civil airplane-Part 15:Acoustic vibration test
HB 8496-2014 Design requirements for passenger seat of civil aircraft
HB 8441-2014 General requirements for civil aircraft electric power system
HB 2410-1977 HB 243-70 CG thread plug gauge d=6~30mm
HB 2382-1977 HB 242-70 thread rolling wheel for reinforced clearance thread d=2~45mm t=0.35~2mm
HB 2375-1977 Machine and hand taps d=12~36mm for processing heat-resistant steel non-through hole HB 241-75 thread
HB 8431-2014 General specification for air data computer of civil aircraft
HB 8410-2014 Requirements for restrain system of the human torso in civil aircraft
HB 7489-2014 General requirements for environmental control system of civil aircraft
HB 2415-1977 HB 243-70 threaded comb-shaped caliper with meter fixed measuring head d=3~30mm
HB 6167.12-2014 Environmental conditions and test procedures for airborne equipment of civil airplane.Part 12: Salt fog test
HB 8425-2014 Classification and code of procurement and supply information
HB 2361-1977 Machine and hand taps d=4~7mm for processing light alloy non-through hole HB 241-75 thread
HB 2417-1977 HB 243-70 threaded comb-shaped caliper with table d=3~6mm
HB 8451-2014 Requirements for electrical bonding of civil aircraft fuel system
HB 2369-1977 Machine and hand taps for processing heat-resistant steel through-hole HB 241-75 threads d=4~7mm
HB 8434-2014 General specification of flight management system for civil aircraft
HB 7316-1996 Interference Thread Machine and Hand Screw Tap for HB 6545-91CG and DG Thread d=42~45mm p=1.5mm
HB 2374-1977 Machine and hand taps for processing heat-resistant steel non-through holes HB 241-75 threads d=8~11mm
HB 8481-2014 Specification for civil aircraft flight data recorder
HB 7117-2014 General requirements for civil aircraft hydraulic systems
HB 8422-2014 Quantitative detection method of EPMA for trace elements in alloys
HB 8483-2014 Cleaning and packing requirements for supply oxygen system of civil aircraft
HB 6167.6-2014 Environmental conditions and test procedures for airborne equipment of civil airplane.Part 6: Vibration test
HB 2408-1977 HB 243-70 AG, BG thread plug gauge and thread group plug gauge application size d=3~30mm
HB 5299.2-2014 Qualification and certification of welding manipulating personnel for aviation industries.Part 2: Electron beam welding and laser beam welding
HB 6167.24-2014 Environmental conditions and test procedures for airborne equipment of civil airplane.Part 24: Lightning induced transient susceptibility test
HB 8479-2014 Specification for active matrix liquid crystal display module of civil aircraft
HB 8466-2014 General requirements for civil airplane ground vibration test
HB 8502-2014 Endurance test requirements for fuel system accessories of civil aircraft
HB 8498-2014 Test requirement for landing gear system performance of civil aircraft
HB 8437-2014 General requirements for flight control system of civil aircraft
HB 6167.10-2014 Environmental conditions and test procedures for airborne equipment of civil airplane.Part 10: Sand and dust test
HB 2393-1977 HB 242-70 threaded end ring gauge d=105~150mm
HB 6942-1994 Slot Cutter for Six-gear Bulb End-milling Cutter, Applicable to HB 6904~6905-94 and HB 6907~6908-94 D=63~80mm
HB/Z 415-2014 General guidelines for airborne electronic equipment of civil aircraft
HB 8468-2014 Requirements for flight test of civil aircraft electric system
HB/Z 20023-2014 Process for plasma nitriding and plasma nitrocarburizing on steel parts for aviation
HB 8490-2014 Requirements of cargo door design for civil aircraft
HB 5299.1-2014 Qualification and certification of welding manipulating personnel for aviation industries.Part 1: Manual fusion welding
HB 8452-2014 Requirements for flight test of civil aircraft fuel system
HB 20136-2014 Type designation method for airborne equipment
HB 7314-1996 Interference Thread Machine and Hand Screw Tap for HB 6545-91 CG and DG Thread d=12~30mm p=1.25~1.5mm
HB 8494-2014 Design requirement on cabin's heat/sound insulation layer of civil airplane
HB 6167.2-2014 Environmental conditions and test procedures for airborne equipment of civil airplane.Part 2: Temperature and altitude test
HB 8454-2014 Requirements on lightning zoning and general layout of civil aircraft
HB 2396-1977 HB 242-70 Thread Calibration Plug Gauge Calibration-Through TT d=52~100mm
HB 8461-2014 Contamination classification for hydraulic fluid of civil aircraft
HB 2420-1977 Appraisal of HB 243-70 threaded band table comb-shaped caliper wear pair table parts d=7~30mm
HB 2413-1977 HB 243-70 CG thread plug gauge and thread group plug gauge application size d=5~30mm
HB 6940-1994 Slot Cutter for Four-gear Bulb End-milling Cutter, Aplicable to HB 6930-94 and HB 6933-94 D=45~80mm
HB 257-1973 HB 241-70, HB 243-70 HB 243-70 threaded bottom hole with smooth plug gauge application size M1~M120, AG3~AG30
HB 6167.3-2014 Environmental conditions and test procedures for airborne equipment of civil airplane-Part 3:Temperture variation test
HB/Z 20021-2014 Brazing process and quality inspection for titanium and titanium alloys
HB 7311-1996 Interference Thread Machine and Hand Screw Tap for HB 6545-91 AG and BG Thread d=33~39mm p=1.5mm
HB 8462-2014 Cnotrol and test requirements of civil aircraft noise
HB 8408-2014 Requirements for contamination control of civil aircraft fuel system
HB 8465-2014 Requirements for wiring of civil aircraft
HB 7313-1996 Interference Thread Machine and Hand Screw Tap for HB 6545-91 CG and DG Thread d=5~10mm p=0.8~1.5mm
HB 8489-2014 General requirements of civil aircraft waste system
HB 8459-2014 Design and installation requirements for hydraulic tubing system of commercial aircraft
HB 6927-1994 HB 6911~6912-94 HB 6914~6915-94.D=75~80mm
HB 6167.22-2014 Environmental conditions and test procedures for airborne equipment of civil airplane-Part 22:Radio frequency susceptibility(radiated and conducted)test
HB 8457-2014 Work breakdown structure for civil airplane development program
HB 7084-2014 General requirements for civil airplane bird-strike design and test
HB 6922-1994 Two-tooth rough machining end mill slot milling cutter sample and proofreading sample testing HB 6921-94 slot milling cutter
HB 2371-1977 Machine and hand taps for processing heat-resistant steel through-hole HB 241-75 threads d=12~36mm
HB 2383-1977 HB 242-70 thread rolling wheel for reinforced clearance thread d=2~33mm t=0.35~2mm
HB/Z 20027.2-2014 Laser shock peening.Part 2: Titanium blisk
HB 2427-1978 Machine tap d=6~7mm for processing HB 243-70 AG interference thread
HB 2424-1978 Hand tap for processing HB 243-70 AG interference thread d=6~7mm
HB 8453-2014 General specification for fuel system accessories of civil aircraft
HB/Z 20027.5-2014 Laser shock peening.Part 5: Super-alloy parts
HB 8464-2014 Requirements for preparation and management of civil airplane standardization documents
HB 6167.26-2014 Environmental conditions and test procedures for airborne equipment of civil airplane.Part 26: Electrostatic discharge test
HB 2384-1977 Thread rolling wheel for HB 243-70 thread d=3~45mm t=0.5~1.5mm
HB 8504-2014 Icing tests requirements for civil aircraft fuel systems and components
HB 7478-2014 Qualification and certification of failure analysis technicians for aviation equipment
HB 8388-2014 General specification for flight director of civil aircraft
HB 6926-1994 Three-tooth rough machining end mill slot milling cutter sample and proofreading sample testing HB 6925-94 slot milling cutter
HB 2376-1977 Nut tap d=3~3.5mm for processing heat-resistant steel HB 241-75 thread
HB 8444-2014 Requirements for flight test of civil aircraft environmental control system
HB 8428-2014 Inspecting method for infrared flash thermography of composite materials for aerospace
HB 8501-2014 Requirements for ground simulation test of commercial aircraft fuel system
HB 6167.19-2014 Environmental conditions and test procedures for airborne equipment of civil airplane.Part 19: Voltage spike test
HB 6167.18-2014 Environmental conditions and test procedures for airborne equipment of civil airplane.Part 18: Power input test
HB 8484-2014 Design requirements for oxygen system of civil aircraft
HB 8423.1-2014 Method for visual spectroscopic analysis of metal materials.Part 1: The visual spectroscopic method of identifying aluminium alloys
HB/Z 414-2014 General guidance for civil aircraft electrical power management
HB 6943-1994 Template and Proofreading Template for Six-gear Bulb End-milling Cutter Slot Cutter - for Inspection of Slot Cutter in HB 6942-94
HB 6167.1-2014 Environmental conditions and test procedures for airborne equipment of civil airplane.Part 1: General principles
HB 8507-2014 General requirement for hydraulic impulse test stand
HB/Z 20027.1-2014 Laser shock peening.Part 1: Titanium blades
HB 6167.4-2014 Environmental conditions and test procedures for airborne equipment of civil airplane.Part 4: Humidity test
HB 743-1992 Template and Reference Template Used for Screw Tap Slot Milling Cutter for Inspecting HB 736-92 Slot Milling Cutter

British Standards Institution (BSI)

BS HB 10168:1999 Handbook HB 10168:1999
BS HB 10170:1999 Handbook HB 10170:1999
BS HB 10169:1999 Handbook HB 10167:1999
BS HB 10167:1999 Handbook HB 10167:1999
HB 10194-2012 HB 10194:2012 Guidance note 3. Inspection and Testing 6/ed

Standards New Zealand

SNZ HB 6117:2014 Electrical installations in dairy sheds
SA/SNZ HB 252-2014 Communications cabling manual Module 3: Residential communications cabling handbook
NZS HB44:2001 Subdivision for People and the Environment (SNZ HB 44:2001)
SNZ HB 6117-2014 Electrical installations in dairy sheds

Standard Association of Australia （SAA）

HB 139(Int)-1999 General Management Manual HB 139 (Int) 1999
SA HB 198-2014 Guide to the specification and testing of slip resistance of pedestrian surfaces
HB 226.3-2000 Construction Industry Contract Toolbox Tool 3 Common Reference Standards HB 226.3 2000

Australian/New Zealand Standard (AU-AS/NZS)

SA/SNZ HB 252:2014 Communications cabling manual - Module 3: Residential communications cabling handbook

South African Bureau of Standard

SANS 1200 HB:1985 Standardized specification for civil engineering construction Section HB: Cladding and sheeting

Society of Automotive Engineers (SAE)

SAE TA-HB-0007-1-2012 Logistics Product Data Reports Handbook (Formerly TechAmerica TA-HB-0007-1)
SAE GEIA-HB-0005/1A-2016 GEIA-HB-0005-1