Surface Resistance Specifications

Surface Resistance Specifications, Total:223 items.

The international standard classification for "Surface Resistance Specifications" includes: Motion picture films. Cartridges , Insulating materials in general , Fixed resistors .

The Chinese standard classification for "Surface Resistance Specifications" includes: Thermal Measurement , Electromagnetic Measurement , Basic standards and general methods for photosensitive material , Electrical insulating material and its products , Resistor .

National Metrological Verification Regulations of the People's Republic of China

JJG 684-2003 Surface Platinum Resistance Thermometer
JJG 124-1993 Verification Regulation of Amperemeter Voltmeter Wattmeter and Ohmmeter

National Metrological Technical Specifications of the People's Republic of China

JJF 1285-2011 Calibration Specification for Surface Resistance Tester

Professional Standard - Chemical Industry

HG/T 3008-1999 Determination of the surface resistance of film base

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 31838.3-2019 Solid insulating materials—Dielectric and resistive properties—Part 3:Resistive properties(DC methods)—Surface resistance and surface resistivity

Professional Standard - Electron

SJ 20794-2000 Resistor networks,fixed,film,surface mount,General specification for

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 9546.8-2015 Fixed resistors for use in electronic equipment―Part 8:Sectional specification―Fixed surface mount resistors

Professional Standard - Aerospace

QJ 2220.2-1992 Test methods for electrical insulation properties of coatings Test methods for insulation resistance, surface resistivity, and volume resistivity
QJ 1990.2-1990 Test methods for electrical properties of electrical insulating adhesives Insulation resistance, surface resistivity,

IPC - Association Connecting Electronics Industries

IPC A-24-G- Surface Insulation Resistance (Gerber Format Only)
IPC TM-650 2.5.17E-1998 Volume Resistivity and Surface Resistance of Printed Wiring Materials
IPC 9201A CD-2007 Surface Insulation Resistance Handbook
IPC TM-650 2.5.17D-1986 Volume Resistivity and Surface Resistance of Printed Wiring Materials
IPC TM-650 2.5.17.1A-1994 Volume and Surface Resistivity of Dielectric Materials
IPC TM-650 2.6.3.3A-1995 Surface Insulation Resistance@ Fluxes

British Standards Institution (BSI)

BS EN 140401:2002 Blank detail specification - Fixed low power non wire-wound surface mount (SMD) resistors
BS EN IEC 62631-3-2:2023 Dielectric and resistive properties of solid insulating materials. Determination of resistive properties (DC methods). Surface resistance and surface resistivity
BS EN 62631-3-2:2016 Dielectric and resistive properties of solid insulating materials. Determination of resistive properties (DC Methods). Surface resistance and surface resistivity
BS EN 140402:2015+A1:2016 Blank Detail Specification: Fixed low power wirewound surface mount (SMD) resistors
BS EN 60115-8:2012 Fixed resistors for use in electronic equipment. Sectional specification. Fixed surface mount resistors
BS EN 12720:2009 Furniture - Assessment of surface resistance to cold liquids
BS EN 60115-9:2004 Fixed resistors for use in electronic equipment - Sectional specification - Fixed surface mount resistor networks with individually measurable resistors
BS EN IEC 60539-2:2019 Directly heated negative temperature coefficient thermistors - Sectional specification. Surface mount negative temperature coefficient thermistors
BS EN ISO 25178-1:2016 Geometrical product specifications (GPS). Surface texture: Areal. Indication of surface texture
BS EN 60115-8-1:2015 Fixed resistors for use in electronic equipment. Blank detail specification: Fixed surface mount (SMD) low power film resistors for general electronic equipment, classification level G
BS 6233:1982 Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials
BS EN 140401:1997 Harmonized system of quality assessment for electronic components - Blank detail specification - Fixed low power non-wire wound surface mounting (SMD) resistors
BS 903-C1:1991 Physical testing of rubber - Determination of surface resistivity
BS EN ISO 21920-1:2022 Geometrical product specifications (GPS). Surface texture: Profile. Indication of surface texture

German Institute for Standardization

DIN EN 140200:2002-03 Sectional specification: Fixed power resistors; German version EN 140200:1996 + A1:2001 / Note: DIN EN 140200 (1997-05) remains valid alongside this standard until 2003-04-01.
DIN EN 140401:2009-12 Blank Detail Specification: Fixed low power film surface mount (SMD) resistors; German version EN 140401:2009 / Note: DIN EN 140401 (2002-12) remains valid alongside this standard until 2012-03-01.
DIN EN 140402:2017-07 Blank Detail Specification: Fixed low power wirewound surface mount (SMD) resistors; German version EN 140402:2015 + A1:2016 / Note: DIN EN 140402 (2015-12) remains valid alongside this standard until 2019-09-19.
DIN EN 62631-3-2 E:2014-10 Dielectric and resistive properties of solid insulating materials - Part 3-2: Determination of resistive properties (DC Methods) - Surface resistance and surface resistivity
DIN 65181:1989-11 Aerospace; measurement of electrical surface resistance of conductive layers
DIN 4000-6:1984-02 Tabular layouts of article characteristics for resistors
DIN 65181:1989 Aerospace; measurement of electrical surface resistance of conductive layers
DIN EN 62631-3-2:2016 Dielectric and resistive properties of solid insulating materials - Part 3-2: Determination of resistive properties (DC Methods) - Surface resistance and surface resistivity (IEC 62631-3-2:2015); German version EN 62631-3-2:2016
DIN EN 140402-801:2015-12 Detail specification: Fixed low power wirewound surface mount (SMD) resistors - Rectangular - Stability classes 0,5; 1; 2; German version EN 140402-801:2015 / Note: DIN EN 140402-801 (2005-08) remains valid alongside this standard until 2017-12-15.
DIN EN 62631-3-2 Berichtigung 1:2018 Dielectric and resistive properties of solid insulating materials - Part 3-2: Determination of resistive properties (DC Methods) - Surface resistance and surface resistivity (IEC 62631-3-2:2015); German version EN 62631-3-2:2016; Corrigendum 1
DIN EN 60115-8:2013-08 Fixed resistors for use in electronic equipment - Part 8: Sectional specification - Fixed surface mount resistors (IEC 60115-8:2009, modified); German version EN 60115-8:2012 / Note: DIN EN 140400 (2004-09) remains valid alongside this standard until 2...
DIN EN 60115-8:2021-03 Fixed resistors for use in electronic equipment - Part 8: Sectional specification - Fixed surface mount resistors (IEC 40/2761/CD:2020); Text in German and English / Note: Date of issue 2021-02-12*Intended as replacement for DIN EN 60115-8 (2013-08).
DIN IEC 60115-6:1986-09 Fixed resistors for use in electronic equipment; sectional specification: fixed resistor networks with individually measurable resistors; identical with IEC 60115-6, edition 1983
DIN EN 166100:1999-03 Sectional specification: Surface acoustic wave (SAW) filters; German version EN 166100:1998
DIN EN 60115-9:2004 Fixed resistors for use in electronic equipment - Part 9: Sectional specification - Fixed surface mount resistor networks with individually measurable resistors (IEC 60115-9:2003); German version EN 60115-9:2004
DIN EN 60115-9:2004-10 Fixed resistors for use in electronic equipment - Part 9: Sectional specification - Fixed surface mount resistor networks with individually measurable resistors (IEC 60115-9:2003); German version EN 60115-9:2004
DIN IEC 60115-4:1987-04 Fixed resistors for use in electronic equipment; sectional specification: fixed power resistors; identical with IEC 60115-4, edition 1982 / Note: To be replaced by DIN EN 60115-4 (2020-04).

SCC

DANSK DS/EN 140401:2009 Blank Detail Specification: Fixed low power film surface mount (SMD) resistors
CEI EN 140402/A1:2016 Blank Detail Specification: Fixed low power wirewound surface mount (SMD) resistors
CEI EN 140402:2016 Blank Detail Specification: Fixed low power wirewound surface mount (SMD) resistors
DANSK DS/EN 140402/A1:2015 Blank Detail Specification: Fixed low power wirewound surface mount (SMD) resistors
DANSK DS/EN 140402:2015 Blank Detail Specification: Fixed low power wirewound surface mount (SMD) resistors
CEI EN 140401:2009 Blank Detail Specification: Fixed low power non-wire-wound surface mount (SMD) resistors
DANSK DS/EN 62631-3-2:2016 Dielectric and resistive properties of solid insulating materials - Part 3-2: Determination of resistive properties (DC Methods) - Surface resistance and surface resistivity
CEI EN 62631-3-2:2016 Dielectric and resistive properties of solid insulating materials Part 3-2: Determination of resistive properties (DC Methods) - Surface resistance and surface resistivity
DANSK DS/EN 130800/A1:2001 Sectional Specification: Tantalum surface mounting capacitors
ESD STM11.11-2006 Surface Resistance Measurement of Static Dissipative Planar Materials
ESD S4.1-2006 Worksurface-Resistance Measurements
CEI EN 140100:2008 Sectional specification: Fixed low power film resistors
DIN EN 62631-3-2 E:2014 Draft Document - Dielectric and resistive properties of solid insulating materials - Part 3-2: Determination of resistive properties (DC Methods) - Surface resistance and surface resistivity (IEC 112/297/CDV:2014); German Version FprEN 62631-3-2:2014
AENOR UNE-EN 62631-3-2:2016 Dielectric and resistive properties of solid insulating materials - Part 3-2: Determination of resistive properties (DC Methods) - Surface resistance and surface resistivity (Endorsed by AENOR in April of 2016.)
DIN EN IEC 62631-3-2 E:2023 Draft Document - Dielectric and resistive properties of solid insulating materials - Part 3-2: Determination of resistive properties (DC methods) - Surface resistance and surface resistivity (IEC 112/566/CD:2022); Text in German and English
IEC 60093:1958/COR1:1958 Corrigendum 1 - Recommended methods of test for volume and surface resistivities of electrical insulating materials
DANSK DS/EN 140400:2004 Sectional specification - Fixed low power surface mount (SMD) resistors
DIN EN 140400:2004 Sectional specification: Fixed low power surface mount (SMD) resistors; German version EN 140400:2003
CEI EN 140400:2005 Sectional specification: Fixed low power surface mount (SMD) resistors
DANSK DS/EN 14904/ZA:2006 Surfaces for sports areas – Indoor surfaces for multi-sports use – Specification
IEC 60093:1958 Recommended methods of test for volume and surface resistivities of electrical insulating materials
CEI EN 60115-8:2013 Fixed resistors for use in electronic equipment Part 8: Sectional specification - Fixed surface mount resistors
DANSK DS/EN 14904:2006 Surfaces for sports areas – Indoor surfaces for multi-sports use – Specification
DANSK DS/EN 60115-8:2012 Fixed resistors for use in electronic equipment - Part 8: Sectional specification - Fixed surface mount resistors
CEI 15-23:1997 Methods for measuring the volume and surface resistivity of solid electrical insulating materials
DANSK DS/EN 130801:2002 Blank Detail Specification: Tantalum surface mounting capacitors
DANSK DS/EN 140402-801:2015 Detail specification: Fixed low power wirewound surface mount (SMD) resistors - Rectangular - Stability classes 0,5; 1; 2
CEI EN 140402-801:2016 Detail specification: Fixed low power wirewound surface mount (SMD) resistors - Rectangular - Stability classes 0,5; 1; 2
CEI EN 60115-9:2005 Fixed resistors for use in electronic equipment Part 9: Sectional specification - Fixed surface mount resistor networks with individually measurable resistors
DANSK DS/EN 60115-9:2004 Fixed resistors for use in electronic equipment - Part 9: Sectional specification - Fixed surface mount resistor networks with individually measurable resistors
BS 2782-2 METHOD 202 TO 204:1957 Methods of testing plastics. Electrical properties Method 202 203 and 204 volume resestivity, surface resistivity and insulation resistance

Spanish Association for Standardization (UNE)

UNE-EN 140402:2015/A1:2016 Blank Detail Specification: Fixed low power wirewound surface mount (SMD) resistors (Endorsed by Asociación Española de Normalización in January of 2017.)
UNE-EN 140402:2015 Blank Detail Specification: Fixed low power wirewound surface mount (SMD) resistors (Endorsed by AENOR in May of 2015.)
UNE-EN 130800:2000 Sectional Specification: Tantalum surface mounting capacitors (Endorsed by AENOR in December of 2000.)
UNE-EN 62631-3-2:2016 Dielectric and resistive properties of solid insulating materials - Part 3-2: Determination of resistive properties (DC Methods) - Surface resistance and surface resistivity (Endorsed by AENOR in April of 2016.)
UNE-EN 140402-801:2015 Detail specification: Fixed low power wirewound surface mount (SMD) resistors - Rectangular - Stability classes 0,5; 1; 2 (Endorsed by AENOR in May of 2015.)
UNE-EN 60115-8:2012 Fixed resistors for use in electronic equipment - Part 8: Sectional specification - Fixed surface mount resistors (Endorsed by AENOR in November of 2012.)
UNE 21303:1983 METHODS OF TEST FOR VOLUME RESISTIVITY AND SURFACE RESISTIVITY OF SOLID ELECTRICAL INSULATING MATERIALS.
UNE-EN 130801:2002 Blank Detail Specification: Tantalum surface mounting capacitors (Endorsed by AENOR in May of 2002.)
UNE-EN IEC 62631-3-2:2023 Dielectric and resistive properties of solid insulating materials - Part 3-2: Determination of resistive properties (DC methods) - Surface resistance and surface resistivity (Endorsed by Asociación Española de Normalización in January of 2024.)

Association Francaise de Normalisation

NF EN 140402:2018 Spécification particulière cadre : résistances fixes bobinées à faible dissipation pour montage en surface (CMS)
NF EN 140402/A1:2018 Spécification particulière cadre : résistances fixes bobinées à faible dissipation pour montage en surface (CMS)
NF C26-631-3-2*NF EN 62631-3-2:2016 Dielectric and resistive properties of solid insulating materials - Part 3-2 : determination of resistive properties (DC Methods) - Surface resistance and surface resistivity
NF EN IEC 62631-3-2:2023 Propriétés diélectriques et résistives des matériaux isolants solides - Partie 3-2 : détermination des propriétés résistives (méthodes en courant continu) - Résistance superficielle et résistivité superficielle
NF EN 140401:2009 Spécification particulière cadre : résistances fixes à couches et à faible dissipation pour montage en surface (CMS)
NF EN 62631-3-2:2016 Propriétés diélectriques et résistives des matériaux isolants solides - Partie 3-2 : détermination des propriétés résistives (Méthodes en courant continu) - Résistance superficielle et résistivité superficielle
NF C93-129-100:2014 Sectional specification : wirewound surface mounting inductors
NF C83-240:2005 Sectional specification : fixed low power surface mount (SMD) resistors.
NF EN IEC 60539-2:2019 Directly heated negative temperature coefficient thermistors - Part 2: intermediate specification - Surface mount negative temperature coefficient thermistors
NF EN 12271:2007 Enduits superficiels - Spécifications
NF C26-915:1965 Méthodes d'essai des vernis isolants - Résistivité transversale et résistivité superficielle.
NF C83-240/A1:1987 Electronic Components surface mounting resistors
NF C26-915/A1:1983 Méthodes d'essai des vernis isolants - Résistivité transversale et résistivité superficielle.
NF EN 130800/A1:2006 Spécification intermédiaire : condensateurs au tantale pour montage en surface
NF C93-266-8*NF EN 60115-8:2013 Fixed resistors for use in electronic equipment - Part 8 : sectional specification - Fixed surface mount resistors
NF C26-915:1967 TEST METHODS FOR INSULATING VARNISHES. VOLUME RESISTIVITY AND SURFACE RESISTIVITY.
NF EN ISO 25178-3:2012 Geometrical product specification (GPS) - Surface finish: surface - Part 3: specification operators
NF C93-266-9*NF EN 60115-9:2005 Fixed resistors for use in electronic equipment - Part 9 : sectional specification - Fixed surface mount resistor networks with individually measurable resistors
NF EN 60115-8:2013 Résistances fixes utilisées dans les équipements électroniques - Partie 8 : spécification intermédiaire - Résistances fixes pour montage en surface

NL-NEN

NEN 3366-1967 Determination of surf ace resistance and insulation resistance of hard plastics

International Electrotechnical Commission (IEC)

IEC 62631-3-2:2015 Dielectric and resistive properties of solid insulating materials - Part 3-2: Determination of resistive properties (DC methods) - Surface resistance and surface resistivity
IEC 60539-2:2019 Directly heated negative temperature coefficient thermistors - Part 2: Sectional specification - Surface mount negative temperature coefficient thermistors
IEC 60115-8:2009 Fixed resistors for use in electronic equipment - Part 8: Sectional specification - Fixed surface mount resistors
IEC 60115-9:2003 Fixed resistors for use in electronic equipment - Part 9: Sectional specification: Fixed surface mount resistor networks with individually measurable resistors

European Committee for Electrotechnical Standardization（CENELEC）

EN 62631-3-2:2016 Dielectric and resistive properties of solid insulating materials - Part 3-2: Determination of resistive properties (DC Methods) - Surface resistance and surface resistivity
EN IEC 62631-3-2:2023 Dielectric and resistive properties of solid insulating materials - Part 3-2: Determination of resistive properties (DC methods) - Surface resistance and surface resistivity
prEN IEC 60115-8 Fixed resistors for use in electronic equipment - Part 8: Sectional specification - Fixed surface mount resistors
EN 60115-8:2012 Fixed resistors for use in electronic equipment - Part 8: Sectional specification - Fixed surface mount resistors

Korean Agency for Technology and Standards (KATS)

KS C IEC 62631-3-2-2022 Dielectric and resistive properties of solid insulating materials — Part 3—2: Determination of resistive properties (DC methods) — Surface resistance and surface resistivity
KS C IEC 62631-3-2-2017(2022) Dielectric and resistive properties of solid insulating materials — Part 3—2: Determination of resistive properties (DC methods) — Surface resistance and surface resistivity
KS C IEC 62631-3-2:2017 Dielectric and resistive properties of solid insulating materials — Part 3—2: Determination of resistive properties (DC methods) — Surface resistance and surface resistivity
KS K 0170-2014 Test method for electrical surface resistivity of fabrics
KS C IEC 60093:2014 Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials
KS L 2109-2021 Measuring methods of surface resistivity for glass substrates
KS L 2109-2006(2021) Measuring methods of surface resistivity for glass substrates
KS C IEC 60115-9:2006 Fixed resistors for use in electronic equipment－Part 9：Sectional specification－Fixed surface mount resistor networks with individually measurable resistors
KS C IEC 60115-9-2006(2021) Fixed resistors for use in electronic equipment－Part 9：Sectional specification－Fixed surface mount resistor networks with individually measurable resistors
KS C IEC 60115-9-2006(2016) Fixed resistors for use in electronic equipment－Part 9：Sectional specification－Fixed surface mount resistor networks with individually measurable resistors
KS K 0170-2019 Test method for electrical surface resistivity of fabrics
KS C IEC 60115-9-2021 Fixed resistors for use in electronic equipment－Part 9：Sectional specification－Fixed surface mount resistor networks with individually measurable resistors
KS C IEC 60093-2017 Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials

ECIA - Electronic Components Industry Association

IS-30-1986 Resistors@ Surface Mount
EIA-575-B-2014 Thick Film Resistor Specification
IS-760-1998 Surface Mount Wirewound Inductor Qualification Specification
EIA-60115-8-2014 Fixed Resistors for Use in Electronic Equipment – Part 8: Sectional Specification - Fixed Surface Mount Resistors
IS-30-A-1987 Resistors@ Rectangular Surface Mount Thick Film
575-1990 Resistors@ Rectangular@ Surface Mount@ General Purpose
EIA/ECA-575-A-2005 Resistors@ Rectangular@ Surface Mount General Purpose
EIA/ECA-576-A-2005 Resistors@ Rectangular@ Surface Mount Precision
576-1990 Resistors@ Rectangular@ Surface Mount@ Precision
EIA-717-A-2010 SURFACE MOUNT NIOBIUM AND TANTALUM CAPACITOR QUALIFICATION SPECIFICATION
EIA/ECA-886-A-2006 THICK FILM RESISTOR ARRAY SPECIFICATION
EIA-886-2001 Thick Film Resistor Array Specification
EIA-886-A-2014 Thick Film Resistor Array Specification

KR-KS

KS C IEC 62631-3-2-2017 Dielectric and resistive properties of solid insulating materials — Part 3—2: Determination of resistive properties (DC methods) — Surface resistance and surface resistivity
KS C IEC 60093-2014 Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials

Japanese Industrial Standards Committee (JISC)

JIS C 2139-3-2:2018 Dielectric and resistive properties of solid insulating materials -- Part 3-2: Determination of resistive properties (DC methods) -- Surface resistance and surface resistivity
JIS K 6378-4:2022 Light conveyor belts -- Determination of electrical surface resistances
JIS K 6378-4:2015 Light conveyor belts -- Determination of electrical surface resistances
JIS C 5201-8:2014 Fixed resistors for use in electronic equipment .Part 8: Sectional specification.Fixed surface mount resistors
JIS C 5201-9:2006 Fixed resistors for use in electronic equipment -- Part 9: Sectional specification: Fixed surface mount resistor networks with individually measurable resistors
JIS R 3256:1998 Measuring methods of surface resistivity for glass substrates
JIS C 2139:2008 Solid electrical insulating materials -- Methods for the determination of volume resistivity and surface resistivity

Standard Association of Australia （SAA）

IEC 62631-3-2:2023 Dielectric and resistive properties of solid insulating materials — Part 3-2: Determination of resistive properties (DC methods) — Surface resistance and surface resistivity
IEC 62631-3-2:2023 CMV Dielectric and resistive properties of solid insulating materials — Part 3-2: Determination of resistive properties (DC methods) — Surface resistance and surface resistivity
IEC 60115-8:2023 Fixed resistors for use in electronic equipment — Part 8: Sectional specification: Fixed surface mount resistors

HU-MSZT

MNOSZ 4855-1951 Power resistor raw materials. Surface resistance measurement of resistive raw materials
MSZ KGST 1989-1979 Main specifications of curved surface ball bearings

Electronic Components, Assemblies and Materials Association

ECA EIA-945-2002 Surface Mount Inductor Qualification Specification
ECA IS-34-1987 Leaded Surface Mount Resistor Networks Fixed Film

IN-BIS

IS 2539-1963 Flat table specifications
IS 12578-1989 Watchmaker's Hammer Plane - Specifications

ESD - ESD ASSOCIATION

STM11.11-2001 Surface Resistance Measurement of Static Dissipative Planar Materials
STM11.11-2006 SURFACE RESISTANCE MEASUREMENT OF STATIC DISSIPATIVE PLANAR MATERIALS
STM11.11-2015 SURFACE RESISTANCE MEASUREMENT OF STATIC DISSIPATIVE PLANAR MATERIALS

Electrostatic Discharge Association (ESDA)

ANSI/ESD STM11.11-2006 Surface Resistance Measurement of Static Dissipative Planar Materials

Institute of Interconnecting and Packaging Electronic Circuits (IPC)

IPC 9201A-2007 Surface Insulation Resistance Handbook

CH-SNV

SN ISO 9003:1988 Quality Systems - Model for quality assurance in final inspection and test

BR-ABNT

ABNT MB-490-1972 Volume resistance and surface resistance detection of insulating materials

VDE - VDE Verlag GmbH@ Berlin@ Germany

VDE 0307-3-2-2016 Dielectric and resistive properties of solid insulating materials - Part 3-2: Determination of resistive properties (DC Methods) - Surface resistance and surface resistivity (IEC 62631-3-2:2015); German version EN 62631-3-2:2016
VDE 0307-3-2 BERICHTIGUNG 1-2018 Dielectric and resistive properties of solid insulating materials - Part 3-2: Determination of resistive properties (DC Methods) - Surface resistance and surface resistivity (IEC 62631-3-2:2015); German version EN 62631-3-2:2016; Corrigendum 1

American Society for Testing and Materials (ASTM)

ASTM B267-07(2013) Standard Specification for Wire for Use In Wire-Wound Resistors
ASTM B532-85(2014) Standard Specification for Appearance of Electroplated Plastic Surfaces
ASTM B633-15 Standard Specification for Electrodeposited Coatings of Zinc on Iron and Steel
ASTM B449-93(2015) Standard Specification for Chromates on Aluminum
ASTM B979-12 Standard Specification for Non-Specular (NS) Surface Finish on Overhead Aluminum Electrical Conductors
ASTM D6176-97(2003) Standard Practice for Measuring Surface Atmospheric Temperature with Electrical Resistance Temperature Sensors
ASTM F672-88(1995)e1 Standard Test Method for Measuring Resistivity Profiles Perpendicular to the Surface of a Silicon Wafer Using a Spreading Resistance Probe

DIN EN IEC

DIN EN IEC 62631-3-2:2024 Dielectric and resistive properties of solid insulating materials - Part 3-2: Determination of resistive properties (DC methods) - Surface resistance and surface resistivity (IEC 62631-3-2:2023); German version EN IEC 62631-3-2:2023

American National Standards Institute （ANSI)

ANSI/EIA 576-A:2005 Resistors, Rectangular, Surface Mount, Precision
ANSI/EIA 60115-8:2014(2019) Fixed Resistors for Use in Electronic Equipment – Part 8: Sectional Specification - Fixed Surface Mount Resistors
ANSI/ESD STM11.11-2021 The Protection of Electrostatic Discharge Susceptible Items - Surface Resistance Measurement of Planar Materials
ANSI/EIA 575-A:2005 Resistors, Rectangular, Surface Mount, General Purpose
ANSI/EIA 60115-9:2014(2019) Fixed Resistors for Use in Electronic Equipment – Part 9: Sectional Specification: Fixed Surface Mount Resistor Networks with Individually Measurable Resistors

Electronic Components, Assemblies and Materials Association

ECA EIA-575-B-2014 Thick Film Resistor Specification
ECA IS-717-1997 Surface Mount Tantalum Capacitor Qualification Specification
ECA EIA-60115-8-2014 Fixed Resistors for Use in Electronic Equipment - Part 8: Sectional Specification - Fixed Surface Mount Resistors
EIA/ECA-576-B-2014 Resistors, Rectangular, Surface Mount Precision
EIA_ECA-576-A-2005 Resistors, Rectangular, Surface Mount Precision
EIA_ECA-575-A-2005 Resistors, Rectangular, Surface Mount General Purpose
ECA EIA-886-A-2014 Thick Film Resistor Array Specification
ECA SP 5053-2004 Resistors, Rectangular, Surface Mount, Precision To be published as ANSI/EIA-576-A

GSO

GSO IEC 60115-8-1:2014 Fixed resistors for use in electronic equipment - Part 8-1: Blank detail specification: Fixed surface mount (SMD) low power film resistors for general electronic equipment, classification level G
OS GSO IEC 60115-8:2014 Fixed resistors for use in electronic equipment - Part 8: Sectional specification - Fixed surface mount resistors
GSO IEC 60115-8:2014 Fixed resistors for use in electronic equipment - Part 8: Sectional specification - Fixed surface mount resistors
GSO IEC 60115-9:2014 Fixed resistors for use in electronic equipment - Part 9: Sectional specification: Fixed surface mount resistor networks with individually measurable resistors
OS GSO IEC 60115-9:2014 Fixed resistors for use in electronic equipment - Part 9: Sectional specification: Fixed surface mount resistor networks with individually measurable resistors

IT-UNI

UNI 4288-1972 Plastic material testing. Determination of surface resistivity and volume resistivity

IECQ - IEC: Quality Assessment System for Electronic Components

QC 400201/US 0005 ISSUE 1-1993 Resistors for Use in Electronic Equipment Detail Specification: Surface Mountable Fixed Power Resistors of Assessed Quality
QC 400101/ US 0004-1993 Resistors for Use in Electronic Equipment: Detail Specification: Surface Mountable Fixed Low Power Resistors of Assessed Quality

SE-SIS

SIS SS-CECC 40400-1990 Sectional specification: Fixed low power surface mounting (chip) resistors

European Standard for Electrical and Electronic Components

CECC 40 401-803-1997 Detail Specification: Fixed Low Power Non-Wirewound Surface Mounting (SMD) Resistors Cylindrical Stability Classes 0,25; 0,5; 1; 2
CECC 40 401-801-1998 Detail Specification: Fixed Low Power Non-Wire Wound Surface Mounting (SMD) Resistors Thin Film, Rectangular Stability Classes 0,1; 0,5; 1 [Superseded By: CECC EN 140401-801]

Lithuanian Standards Office

LST EN 140400-2004 Sectional specification: Fixed low power surface mount (SMD) resistors

CENELEC - European Committee for Electrotechnical Standardization

EN 140400:1996 Sectional Specification: Fixed Low Power Surface Mounting (SMD) Resistors
EN 140400:2003 Sectional Specification: Fixed Low Power Surface Mounting (SMD) Resistors

Malaysia Standards

MS 1465 Pt.1-1999 Method of test for determination of plastics resistivity: Part 1: surface resistivity

U.S. Military Regulations and Norms

ARMY QPL-914-6-2005 RESISTOR NETWORKS, FIXED, FILM, SURFACE MOUNT, NONESTABLISHED RELIABILITY, AND ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR

GOSTR

GOST R 58725-2019 Sport rubber surfacings. Specifications

RO-ASRO

STAS 5730/2-1985 Surface conditions SURFACE ROUGHNESS PARA- METERS AND SPECIFICATIONS
STAS 6271-1981 Ground nets for telecommimication installations ELECTRIC RESISTANCE Spet-ifications

Danish Standards Foundation

DS/EN 60115-8:2012 Fixed resistors for use in electronic equipment - Part 8: Sectional specification - Fixed surface mount resistors
DS/EN 60115-9:2004 Fixed resistors for use in electronic equipment - Part 9: Sectional specification - Fixed surface mount resistor networks with individually measurable resistors

Defense Logistics Agency

DLA QPL-23648-29-2006 RESISTORS, THERMAL (THERMISTOR) INSULATED, GENERAL SPECIFICATION FOR
DLA QPL-32192-1-2006 RESISTORS, CHIP, THERMAL (THERMISTOR), GENERAL SPECIFICATION FOR
DLA MIL-PRF-32192 (1)-2005 RESISTORS, CHIP, THERMAL (THERMISTOR), GENERAL SPECIFICATION FOR
DLA A-A-59742 VALID NOTICE 1-2011 Inductor, Chip, Power, Low Resistance, Surface Mount

RU-GOST R

GOST R 50499-1993 Solid electrical insulating materials. Methods of test for volume resistivity and surface resistivity
GOST 8623-1978 Supplementary resistances for electrical measuring instruments. Specifications
GOST 29104.20-1991 Industrial fabrics. Method for determination of surface specific electric resistance
GOST 25937-1983 Materials for shoes. Method for determination of specific volume and surface resistance
GOST 19616-1974 Weaving and knitted fabrics. A method for evaluating the specific surface resistance

PL-PKN

PN C05011 ArkusZ07-1972 Test methods of conveyer belts Determination of the surface resistance

CZ-CSN

CSN IEC 93:1993 Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials

SAE - SAE International

SAE J1378-1983 Electric Hourmeter Specification@ Recommended Practice

Society of Automotive Engineers (SAE)

SAE J1378-1998 Electric Hourmeter Specification

YU-JUS

JUS N.C0.036-1980 Testing offlexible cords and cables. Measurements ofinsulation resistance, resistance of semi-conducting layers and surface resistance.

Others: Specifications of cpvc,Specifications of Benzene,Tablet Specifications,mic specifications,Powder Specifications,Surface Resistance Specifications,Propylene Specifications,Drop hammer specifications,Surface Resistance Specifications,Nitrogen Specifications,Specifications of peas,Specifications of rice,Beverage Specifications,Screen Specifications,Catheter Specifications,Specifications of graphite,Specifications of forgings,Acetone Specifications,Bushing Specifications