polymer curve

polymer curve, Total:149 items.

The international standard classification for "polymer curve" includes: Reinforced plastics , Rubber .

The Chinese standard classification for "polymer curve" includes: Fibre reinforced composites , Basic standard and general method for synthetic rubber .

Professional Standard - Petroleum

SY/T 5740-1995 Design requirements for polymer flooding pilot test

Professional Standard - Aviation

HB 8623-2021 Test method for curved beam strength of polymer matrix composites for aerospace applications

Group Standards of the People's Republic of China

T/CSTM 00984-2023 Test methods of liquid crystal polymer / modified polyimide materials for antennas
T/CSTM 00485-2022 Test method for flexural properties of fiber reinforced polymer matrix composite laminates

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 3356-2014 Test method for flexural properties of orientational fiber reinforced polymer metrix composite materials

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 35465.5-2020 Test method for fatigue properties of polymer matrix composite materials—Part 5:Flexural fatigue

未注明发布机构

ASTM RR-D02-1606 2006 D6482-Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants by Cooling Curve Analysis with Agitation (Tensi Method)

Professional Standard - Petrochemical Industry

SH/T 1764.1-2008 Rubber-Analysis by pyrolytic gas-chromatographic methods-Part 1:Identification of polymers(single polymers and polymer blends)

Professional Standard - Construction Industry

JGJ 337-2015 Technical Specification for Strengthening of Building Structures with Steel Stranded Wire Mesh and Polymer Mortar

RU-GOST R

GOST R 57866-2017 Polymer composites. Determination of flexural properties
GOST R 57917-2017 Polymer composites. Determination of dynamic viscosity of thermosetting resins by the sinusoidal method
GOST R 56805-2015 Polymer composites. Methods for determination of flexural properties
GOST R 57041-2016 Polymer composites. Method of determination of the characteristics of flexural curved beams
GOST R 56784-2015 Polymer composites. Method for determination of flexure creep of sandwich constructions
GOST R 57732-2017 Polymer composites. Determination of strength of adhesive bonded joints using a bending-shear method
GOST R 57843-2017 Wood polymer composites. Test methods for determination of flexural mechanical properties
GOST 24036-1980 Seal sheet materials, asbestos polymer. Method of test for folding resistance
GOST R 56209-2014 Rods composite polymer for the manufacture of cores uninsulated wires. Specifications
GOST R 56657-2015 Polymer composites. Method for determination of flexural properties of glass-fibre reinforced pultruded plastic rods
GOST R 56791-2015 Polymer composites. Determination of mechanical characteristics of shear of the inner layer of sandwich constructions by beam flexure

GOSTR

GOST R 57151-2016 Polymer composites. Method of constructing the curve of equilibrium deformation of samples of organic glasses
GOST R 56680-2015 Polymer composites. Determination facing’s mechanical flexural properties of sandwich construction by long beam flexure method
GOST 7480-1973 Polygraphic wire. Specifications

Korean Agency for Technology and Standards (KATS)

KS C 3904-2003(2018) Polymer bushing for wiring lines
KS M ISO 458-2:2003 Plastics－Determination of stiffness in torsion of flexible materials－Part 2：Application to plasticized compounds of homopolymers and copolymers of vinyl chloride
KS C 3904-2023 Polymer bushing for distribution lines
KS C 3904-2003 Polymer bushing for distribution lines
KS K 0545-1974 Testing methods for crimp of yarn in fabrics : Dead load
KS K 0545-2001 Testing methods for crimp of yarn in fabrics : Dead load
KS M 3826-1993 Determination of Chlorine in Chlorine-containing Polymers,Copolymers and their Compounds

YU-JUS

JUS U.C4.052-1990 Caaages of direction in the borizontal plane. Traosition curve. Horizontal cur~ es. Compound curves
JUS G.S2.631-1991 Plastics. Determination of stiffness in torsion of flexible materials. Application to plasticized compounds of homopolymers and copolymers of vinvl chloride

American Society for Testing and Materials (ASTM)

ASTM D7264/D7264M-07 Standard Test Method for Flexural Properties of Polymer Matrix Composite Materials
ASTM D7264/D7264M-15 Standard Test Method for Flexural Properties of Polymer Matrix Composite Materials
ASTM D7264/D7264M-06 Standard Test Method for Flexural Properties of Polymer Matrix Composite Materials
ASTM D7264/D7264M-21 Standard Test Method for Flexural Properties of Polymer Matrix Composite Materials
ASTM D7914/D7914M-21 Standard Test Method for Strength of Fiber Reinforced Polymer (FRP) Bent Bars in Bend Locations
ASTM D7646-23 Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants for Aluminum Alloys by Cooling Curve Analysis
ASTM D7646-10 Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants for Aluminum Alloys by Cooling Curve Analysis
ASTM D7646-10(2014) Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants for Aluminum Alloys by Cooling Curve Analysis
ASTM D7646-10(2019) Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants for Aluminum Alloys by Cooling Curve Analysis
ASTM D6482-06 Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants by Cooling Curve Analysis with Agitation (Tensi Method)
ASTM D6415/D6415M-22 Standard Test Method for Measuring the Curved Beam Strength of a Fiber-Reinforced Polymer-Matrix Composite
ASTM D6415-99e1 Standard Test Method for Measuring the Curved Beam Stength of a Fiber-Reinforced Polymer-Matrix Composite
ASTM D6415/D6415M-06a(2013) Standard Test Method for Measuring the Curved Beam Strength of a Fiber-Reinforced Polymer-Matrix Composite
ASTM D6482-21 Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants by Cooling Curve Analysis with Agitation (Tensi Method)
ASTM D6482-99 Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants by Cooling Curve Analysis with Agitation (Tensi Method)
ASTM D6482-01 Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants by Cooling Curve Analysis with Agitation (Tensi Method)
ASTM D6482-06(2011) Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants by Cooling Curve Analysis with Agitation (Tensi Method)
ASTM D6482-06(2016) Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants by Cooling Curve Analysis with Agitation (Tensi Method)
ASTM D7914/D7914M-14 Standard Test Method for Strength of Fiber Reinforced Polymer (FRP) Bent Bars in Bend Locations
ASTM D8069-17 Standard Test Method for Determining Flexural Modulus of Full Section Pultruded Fiber Reinforced Polymer (FRP) Composite Members with Doubly Symmetric Cross Sections under Bending
ASTM D8069-17a Standard Test Method for Determining Flexural Modulus of Full Section Pultruded Fiber Reinforced Polymer (FRP) Composite Members with Doubly Symmetric Cross Sections under Bending

GM North America

GM GMP.E/P.107-2002 Polyolefin Alloy UV Stabilized, 10% Mineral Filler, 1400 Flexural Modulus, Injection Molded
GM GMP.E/P.075-1997 Polyolefin Alloy - 440 MPa Flexural Modulus, UV Stabilized
GM GMP.E/P.089-2004 Polyolefin Alloy 20% Mineral Filled, 1950 MPa Flexural Modulus
GM GMP.E/P.020-1995 Polyolefin Alloy - 15% Mineral Filled, 1200 MPa Flexural Modulus
GM GMP.E/P.038-1990 Polyolefin Alloy - 5% Glass Reinforced + 3% Mineral Filled, 1350 MPa Flexural Modulus, UV Light Stable
GM GMP.E/P.063-1996 Polyolefin Alloy - 25% Mineral Filled, 1200 MPa Flexural Modulus, Low CLTE
GM GMP.E/P.062-1996 Polyolefin Alloy - 15% Mineral Filled, 550 MPa Flexural Modulus, Low CLTE
GM GMP.E/P.041-1990 Polyolefin Alloy - 35% Mineral Filled, 700 MPa Flexural Modulus, Black
GM GMP.E/P.096-2004 Polyolefin Alloy - MPa Flex Mod, UV Stabilized, High Flow
GM GMP.E/P.013-1993 Polyolefin Alloy - 27.5% Mineral Filled, 1500 MPa Flexural Modulus, Black
GM GMP.E/P.014-1992 Polyolefin Alloy - Weather Resistant, 18% Mineral Filled, 1200 MPa Flexural Modulus
GM GMP.E/P.056-1993 Polyolefin Alloy - Weather Resistant, 27% Mineral Filled, 1600 MPa Flexural Modulus
GM GMP.E/P.076-2004 Polyolefin Alloy - Weather Resistant, 20% Mineral Filled, 1950 MPa Flexural Modulus
GM GMP.E/P.050-1995 Polyolefin Alloy - Weather Resistant, 15% Mineral Filled, 1200 MPa Flexural Modulus
GM GMP.E/P.032-1990 Polyolefin Alloy - 900 MPa Flexural Modulus, Interior UV Light Stabilized, Injection Molding Grade
GM GMP.TPU.018-1993 Thermoplastic Polyurethane Alloy - 10% Mineral Filled, 450 MPa Flexural Modulus
GM GMP.TPU.019-1993 Thermoplastic Polyurethane Alloy - 20% Mineral Filled, 250 MPa Flexural Modulus
GM GMP.E/P.121-2003 Polyolefin Alloy 1300 MPa Flexural Modulus, 20% Mineral Filled, High Flow
GM GMP.E/P.049-1992 Polyolefin Alloy - 375 MPa Flexural Modulus
GM GMP.E/P.074-1996 Polyolefin Alloy - 800 MPa Flexural Modulus
GM GMP.E/P.039-2003 Polyolefin Alloy 700 MPa Flexural Modulus
GM GMP.E/P.051-1997 Polyolefin Alloy - Weatherable, 15% Mineral Filled, 550 MPa Flexural Modulus, Low CLTE
GM GMP.E/P.026-1993 Polyolefin Alloy - 8% Maximum Glass/Mineral Filled, 575 MPa Flexural Modulus
GM GMP.E/P.023-1992 Polyolefin Alloy - 550 MPa Flexural Modulus
GMP.E/P.039-2003 Polyolefin Alloy - 700 MPa Flexural Modulus Revision B
GM GMP.E/P.059-1993 Polyolefin Alloy - 320 MPa Flexural Modulus
GM GMP.E/P.025-1994 Polyolefin Alloy - Weather Resistant, 700 MPa Flexural Modulus
GM GMP.E/P.064R-1994 Polyolefin Alloy - Recycled, 550 MPa Flexural Modulus
GM 9985574-1994 Adhesive, Urethane, Polymer
GM 9985573-1994 Adhesive, Urethane, Polymer
GM GMP.E/P.069-1994 Polyolefin Alloy - Weather Resistant, 925 MPa Flexural Modulus
GM GMP.E/P.113-2003 Polyolefin Alloy UV Stabilized, 700 MPa Flexural Modulus, Low Temperature Impact, Injection Molded
GM GMP.E/P.028-2003 Polyolefin Alloy Weather Resistant, 550 MPa Flexural Modulus
GM GMP.E/P.068-1996 Polyefin Alloy - Weatherable, 25% Glass and Mineral Filled, 1200 MPa Flexural Modulus, Low CLTE
GM GMP.E/MA.016-2003 E/MA-Ionomer - UV Stabilized, 4% Glass Fiber Filled, 900 MPa Flexural Modulus, Injection Molded
GM GMP.E/P.099-2003 Polyolefin Alloy 900 MPa Flexural Modulus, High Flow
GM GMP.E/P.070-1996 Polyolefin Alloy - 20% Mineral Filled, UV Stable

IT-UNI

UNI 4818-P13-1974 Stents with vinyl chloride polymer or copolymer covering. experiment method. Bending fatigue strength measurement using Bally flexometer
UNI 4818-P12-1974 Stents with vinyl chloride polymer or copolymer covering. experiment method. Bending fatigue strength measurement
UNI 4818-P14-1974 Stents with vinyl chloride polymer or copolymer covering. experiment method. Determination of low temperature bending strength

KR-KS

KS C 3904-2003(2023) Polymer bushing for distribution lines
KS M ISO 7270-1-2023 Rubber — Analysis by pyrolytic gas-chromatographic methods — Part 1: Identification of polymers (single polymers and polymer blends)

ZA-SANS

SANS 1228:2009 Abrasion-resistant polymeric gloves: Lined type
SANS 1228:2003 Abrasion-resistant polymeric gloves: Lined type

SAE - SAE International

SAE AS22759C-2014 Wire, Electrical, Fluoropolymer-Insulated, Copper or Copper Alloy
SAE AS22759A-A1-2008 Wire@ Electrical@ Fluoropolymer-Insulated@ Copper or Copper Alloy
SAE AS22759-A1-2005 Wire@ Electrical@ Fluoropolymer-Insulated@ Copper or Copper Alloy

Society of Automotive Engineers (SAE)

SAE AS22759B-2011 Wire, Electrical, Fluoropolymer-Insulated, Copper or Copper Alloy
SAE AS22759-2001 Wire, electrical, fluoropolymer-insulated, copper or copper alloy
SAE AS22759A-2006 (R) Wire, Electrical, Fluoropolymer-Insulated, Copper or Copper Alloy
SAE ARP7204-2023 Polymeric Bearings for Linear Actuators
SAE AS22759D-2018 Wire, Electrical, Fluoropolymer-Insulated, Copper or Copper Alloy
SAE AS22759_A1-2005 Wire, Electrical, Fluoropolymer-Insulated, Copper or Copper Alloy
SAE AS22759A_A1-2008 Wire, Electrical, Fluoropolymer-Insulated, Copper or Copper Alloy
SAE AS81044A-2011 Wire, Electrical, Crosslinked Polyalkene, Crosslinked Alkane-imide Polymer, or Polyarlyene Insulated, Copper or Copper Alloy
SAE AS81044_A1-2004 Wire, Electrical, Crosslinked Polyalkene, Crosslinked Alkane-Imide Polymer, Or Polyarlyene Insulated, Copper Or Copper Alloy
SAE AS81044B-2019 Wire, Electrical, Crosslinked Polyalkene, Crosslinked Alkane-Imide Polymer, or Polyarylene Insulated, Copper or Copper Alloy

CZ-CSN

CSN 90 2310-1953 Curved board Myanmar combination

British Standards Institution (BSI)

BS 6319-3:1990(2011) Testing of resin and polymer / cement compositions for use in construction — Part 3 : Methods for measurement of modulus of elasticity in flexure and flexural strength
BS EN ISO 20795-2:2013 Dentistry. Base polymers. Orthodontic base polymers
BS EN ISO 20795-1:2008 Dentistry - Base polymers - Denture base polymers
BS ISO 7270-1:2003+A1:2010 Rubber. Analysis by pyrolytic gas-chromatographic methods. Identification of polymers (single polymers and polymer blends)
BS EN ISO 20795-1:2013 Dentistry. Base polymers. Denture base polymers
BS ISO 7270-1:2020 Rubber. Analysis by pyrolytic gas-chromatographic methods - Identification of polymers (single polymers and polymer blends)

United States Navy

NAVY QPL-AS22759-1-2005 WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED, COPPER OR COPPER ALLOY [Superseded: NAVY QPL-22759 -42 CANC NOTICE 1, NAVY QPL-22759 -42, NAVY QPL-22759 -41, NAVY QPL-22759 -40, NAVY QPL-22759 -39, NAVY QPL-22759 -38, NAVY QPL-22759 -37, NAVY QPL-2275
NAVY QPL-82633-2-1976 COMPOUND, POLYMERIC ELASTOMER, THERMOSETTING (FOR USE AS BOMB TAIL PAD)
NAVY QPL-AS81044-17-2007 WIRE, ELECTRICAL, CROSSLINKED POLYALKENE, CROSSLINKED ALKANE-IMIDE POLYMER, OR POLYARLYENE INSULATED, COPPER OR COPPER ALLOY [Superseded: NAVY QPL-81044 -17 CANC NOTICE 1, NAVY QPL-81044-17, NAVY QPL-81044-16, NAVY QPL-81044-15, NAVY QPL-81044-14, NAVY

German Institute for Standardization

DIN ISO 458-2:1995 Plastics - Determination of stiffness in torsion of flexible materials - Part 2: Application to plasticized compounds of homopolymers and copolymers of vinyl chloride (ISO 458-2:1985)
DIN VDE 0207-6:2004 Insulating and sheathing compounds for cables and flexible cords - Fluorinated polymers

VDI - Verein Deutscher Ingenieure

VDI 2546-1977 Capillary rheometry of molten polymers; presentation of flow- and viscosity curves and of entrance pressure losses

SCC

ASTM D6415/D6415M-06a Standard Test Method for Measuring the Curved Beam Strength of a Fiber-Reinforced Polymer-Matrix Composite
BS ISO 7270-1:2003 Rubber. Analysis by pyrolytic gas-chromatographic methods. Identification of polymers (single polymers and polymer blends)
BS 2863:1984 Method for determination of crimp of yarn in fabric
ISO 2028:2015 Plus Redline Synthetic rubber latex - Preparation of dry polymer (includes Redline Version)

Underwriters Laboratories (UL)

UL 83A-2021 UL Standard for Safety Flouropolymer Insulated Wire
UL 1692 BULLETIN-2011 UL Standard for Safety Polymeric Materials – Coil Forms
UL 1692 BULLETIN-2013 UL Standard for Safety Polymeric Materials – Coil Forms
UL 1692 BULLETIN-2005 UL Standard for Safety Polymeric Materials – Coil Forms
UL 1692 BULLETIN-2015 UL Standard for Safety Polymeric Materials – Coil Forms
UL 1692 BULLETIN-2012 UL Standard for Safety Polymeric Materials – Coil Forms

GSO

GSO ISO 458-2:2015 Plastics -- Determination of stiffness in torsion of flexible materials -- Part 2: Application to plasticized compounds of homopolymers and copolymers of vinyl chloride

CH-SNV

VSM 23732-1971 Vortex line. Engage. Criteria for Calculation Curves of Displacement Engagement

PK-PSQCA

PS 122-1960 DETERMINATION OF CRIMP IN YARN IN FABRIC

PL-PKN

PN C04001-1967 Petroleum Determination of curve of the veritabies boilings tempera?ures and of curves of the physicols and chemicals properties

ISUZU - Isuzu Motors Ltd.

ISC-C92-035-2009 Polypropylene material for interior@ high flexural modulus copolymer ―Type:I-3
ISC-C92-030-2009 Polypropylene material for exterior@ 1050MPa flexural modulus@ high impact modified copolymer
ISC-C92-025-2009 Polypropylene material for interior@ 1500MPa flexural modulus@ high impact modified copolymer