Sealed test box

Sealed test box, Total:311 items.

The international standard classification for "Sealed test box" includes: General purpose containers , Freight distribution of goods , Other standards related to freight distribution of goods .

The Chinese standard classification for "Sealed test box" includes: Container, tray and pallet , Rubber seal , Water supply and draining instrument and equipment , Fuel system and its accessories .

Professional Standard - Traffic

JT/T 811-2011 Sealants for freight containers

Professional Standard - Nuclear Industry

EJ/T 1175.1-2004 Components for containment enclosures - Part 1: Glove/bag ports, bungs for glove/bag ports, enclosure rings and interchangeable units
EJ/T 1175.5-2008 Components for containment enclosures.Part 5: Penetrations for electrical and fluid circuits of unsheilded containment enclosures
EJ/T 1096-1999 Containment enclosures: Classification according to leak tightness and associated checking method
EJ/T 1175.6-2014 Components for containment enclosures.Part 6: Staple penetrations for shielded containment enclosures
EJ/T 1108-2001 Design principles for containment enclosures

Professional Standard - Aerospace

QJ 3008-1998 Tactical missile barrel (box) bomb sealing test method

Group Standards of the People's Republic of China

T/QGCML 2189-2023 Highly Sealed Portable Motor Oil Tank
T/CBMF 46*T/CCPA 8-2019 Sealing materials for precast concrete box culvert joints
T/CCPA 8-2019 Sealing material for interface of precast concrete box culvert
T/CAMS 92-2022 Sealed box gas purifier

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 15846-1995 The door gasket for freight containers
GB/T 23679-2009 Freight containers - Mechanical seals
GB/T 15846-2006 The door gasket for freight container

Professional Standard - Railway

TB/T 2113-1990 Specification on the Door Gasket for Railway 10t Container

未注明发布机构

DIN EN 13880-7 E:2001-02 Hot applied joint sealants - Part 7: Function testing of joint sealants
SAE AS5127C-2018 Methods for Testing Aerospace Sealants
DIN 18545-2 E:2007-10 Sealing of glazings with sealants - Part 2: Sealants, designation, requirements, testing
KS F 2621-2020 Testing methods of sealants for sealing and glazing in buildings
ASTM RR-C24-1022 1987 C0718- Test Method for Ultraviolet (UV)-Cold Box Exposure of OnePart, Elastomeric, Solvent-Release Type Sealants
SAE AS6944-2023 Dynamic Seal Test Fixture
ASTM RR-C24-1027 1989 D2203-Test Method for Staining of Sealants
DIN EN 13880-7 E:2017-05 Hot applied joint sealants - Part 7: Function testing of joint sealants
DIN 18545-2 Sealing of glazings with sealants - Part 2: Sealants, designation, requirements, testing
ASTM RR-C24-1002 1972 C0718- Test Method for Ultraviolet (UV )-Cold Box Exposure of One- Part, Elastomeric, Solvent-Release Type Sealants
DIN EN 14241-1:2005 Exhaust systems – Material requirements and tests for elastomeric seals and sealing materials – Part 1: Seals for use in inner pipes
ASTM RR-C24-1004 1974 C0782- Test for Softness of Performed Sealing Tape

Professional Standard - Building Materials

JC/T 551-1994 Test method for sealing and life of drain valve for low water tank fittings of toilet

Military Standard of the People's Republic of China-General Armament Department

GJB 3581-1999 Specification for rapid repair sealants for aircraft integral fuel tanks

Professional Standard - Military and Civilian Products

WJ 234-1964 Sealing Tester

Professional Standard - Aviation

HB/Z 25-1980 Self sealing riveting for integral tank (on trail)

Korean Agency for Technology and Standards (KATS)

KS T 1338-2003 Standard practice for methods of closing, sealing and reinforcing fiberboard boxes
KS T 1338-2013 Standard practice for methods of closing, sealing and reinforcing fiberboard boxes
KS W 2201-1990(2010) Self-Sealing Fuel Tank for Aircraft
KS W 2201-2013 Self-Sealing Fuel Tank for Aircraft
KS V 8811-1987(2012) Marine cable glands for electric watertight box
KS V 8817-2014(2019) Marine cable glands for electric watertight box
KS V 8811-1987 Marine cable glands for electric watertight box
KS W 2201-1990 Self-Sealing Fuel Tank for Aircraft
KS F 2621-2000(2020) Testing methods of sealants for sealing and glazing in buildings
KS A ISO 11933-1:2006 Components for containment enclosures－Part 1：Glove/bag ports, bungs for glove/bag ports, enclosure rings and interchangeable units
KS M 7137-1995 Testing methods for sealed flexible packages
KS M 7137-2016 Testing methods for sealed flexible packages
KS V 8812-1976 Marine cable glands for bulkhead and deck
KS T ISO 18185-5-2013(2018) Freight containers－Electronic seals－Part 5：Physical layer
KS M 2095-1985 Testing methods for sealant for automobiles
KS K 0745-1999 Test method for seam strength of sewn geotextiles
KS M 2095-2010(2020) Testing methods for sealant for automobiles
KS W 2202-1990(2010) Internal Removable Propulsion Fluid Tanks for Aircraft (Non-Self-Sealings)
KS T ISO 18185-3-2013(2018) Freight containers－Electronic seals－Part 3：Environmental characteristics
KS T ISO 18185-2-2013(2018) Freight containers－Electronic seals－Part 2：Application requirements
KS A 4521-1995 Classification and testing of sealed radioactive sources
KS W 2202-2013 Internal Removable Propulsion Fluid Tanks for Aircraft (Non-Self-Sealings)
KS C IEC 60512-14-6:2009 Connectors for electronic equipment-Tests and measurements-Part 14-6:Sealing tests-Test 14f:Interfacial sealing
KS C IEC 60512-14-6:2014 Connectors for electronic equipment－Tests and measurements－Part 14-6：Sealing tests－Test 14f：Interfacial sealing

Society of Automotive Engineers (SAE)

SAE AIR4069A-1998 Sealing Integral Fuel Tanks
SAE AIR4069B-2010 Sealing of Integral Fuel Tanks
SAE AMS-HH-G-101A-2014 Gasket, Metallic-Encased
SAE AMS-HH-G-101-2000 Gasket, Metallic-Encased
SAE AIR4069C-2016 Sealing of Integral Fuel Tanks
SAE AIR4069D-2022 Sealing of Integral Fuel Tanks
SAE AMS-S-4383C-2021 Sealing Compound, Topcoat, Fuel Tank, Buna-N Type
SAE AMS-S-4383-1999 Sealing Compound, Topcoat, Fuel Tank, Buna-N Type
SAE AMS-S-4383A-2010 Sealing Compound, Topcoat, Fuel Tank Buna-N Type
SAE J110C-1978 SEALS—TESTING OF RADIAL LIP
SAE J1172-1993 Engine Flywheel Housings with Sealed Flanges
SAE J1172-2012 Engine Flywheel Housings with Sealed Flanges
SAE AS5127A-2002 Methods for Testing Aerospace Sealants
SAE AIR4275B-2021 Jet Reference Fluid Study for Fuel Tank Sealants
SAE AS7982-2019 Static Seal Test Fixture and Procedure
SAE TS349-1-1987 TS349 Test for Electrical Connectors Interfacial Sealing
SAE TS337-2-1987 TS337 Test for Electrical Connectors Environmental Sealing
SAE AIR4275-1991 Jet Reference Fluid Study for Fuel Tank Sealants
SAE J1900-2000 Seals—Bond Test Fixture and Procedure
SAE J1195-1993 Cylinder Rod Wiper Seal Ingression Test

SAE - SAE International

SAE AIR4069-1990 Sealing Integral Fuel Tanks
SAE J110-1985 SEALS - TESTING OF RADIAL LIP
SAE J110-2002 Seals - Testing of Radial Lip
SAE J110-1997 Seals - Testing of Radial Lip
SAE J110-1991 Seals - Testing of Radial Lips
SAE AIR4275A-2012 Jet Reference Fluid Study for Fuel Tank Sealants
SAE J1195-1986 CYLINDER ROD WIPER SEAL INGRESSION TEST
SAE J1195-1977 CYLINDER ROD WIPER SEAL INGRESSION TEST
SAE J1900-1990 Seals - Bond Test Fixture and Procedure
SAE J1900-2002 Seals - Bond Test Fixture and Procedure
SAE AS5127-1997 Methods for Testing Aerospace Sealants

GSO

BH GSO ISO 17712:2016 Freight containers -- Mechanical seals
GSO ISO 17712:2013 Freight containers -- Mechanical seals
OS GSO IEC 60512-14-6:2015 Connectors for electronic equipment - Tests and measurements - Part 14-6: Sealing tests - Test 14f: Interfacial sealing
BH GSO IEC 60512-14-6:2016 Connectors for electronic equipment - Tests and measurements - Part 14-6: Sealing tests - Test 14f: Interfacial sealing
GSO IEC 60512-14-2:2015 Connectors for electronic equipment - Tests and measurements - Part 14-2: Sealing tests - Test 14b: Sealing - Fine air leakage
BH GSO IEC 60512-14-2:2016 Connectors for electronic equipment - Tests and measurements - Part 14-2: Sealing tests - Test 14b: Sealing - Fine air leakage
OS GSO IEC 60512-14-2:2015 Connectors for electronic equipment - Tests and measurements - Part 14-2: Sealing tests - Test 14b: Sealing - Fine air leakage

PL-PKN

PN H75124-1956 Flushing cast-iron cisterns -- Seal
PN J02001-1989 Sealed radioactive sources Leakage test methods
PN B20104-1966 Cork shee?s for sealing and shoes Methods of ?ests

SCC

BS 2562-1:1955 Cable sealing boxes for oil immersed transformers. Boxes forvoltages up to and including 11 kV
BS DD ISO/PAS 17712:2003 Freight containers. Mechanical seals
BS DD ISO/PAS 17712:2006 Freight containers. Mechanical seals
MIL MIL-DTL-5578D-2008 TANK, FUEL, AIRCRAFT, SELF-SEALING
BS ISO 17712:2010 Freight containers. Mechanical seals
DANSK DS/ISO 17712:2013 Freight containers - Mechanical seals
DANSK DS/ISO/PAS 17712:2006 Freight containers - Mechanical seals
BS 2011-2.1Q:1981 Environmental testing. Tests-Test Q. Sealing
06/30160003 DC BS ISO 17712. Freight Containers-Mechanical seals
CEI EN 60512-14-6:2007 Connectors for electronic equipment - Tests and measurements - Part 14-6: Sealing tests - Test 14f: Interfacial sealing
DANSK DS/EN 60512-14-6:2006 Connectors for electronic equipment - Tests and measurements - Part 14-6: Sealing tests - Test 14f: Interfacial sealing
MIL MIL-D-9063B-1965 DESEALANT, INTEGRAL FUEL AND OIL TANKS (S/S BY MIL-R-81294D)
CEI EN 60512-14-2:2007 Connectors for electronic equipment - Tests and measurements - Part 14-2: Sealing tests - Test 14b: Sealing - Fine air leakage
SAE AMSS4383A-2010 Sealing Compound, Topcoat, Fuel Tank Buna-N Type
DANSK DS/EN 60512-14-2:2006 Connectors for electronic equipment - Tests and measurements - Part 14-2: Sealing tests - Test 14b: Sealing - Fine air leakage
MIL MIL-T-5578C-1963 TANK, FUEL, AIRCRAFT, SELF-SEALING (SUPERSEDING MIL-T-5578B)
SAE AMSS4383B-2015 Sealing Compound, Topcoat, Fuel Tank Buna-N Type
CEI EN 60068-2-17:1997 Environmental testing - Part 2: Tests - Test Q: Sealing
HOLDEN HN 1130-2009 SEAL – FLOATING RESERVOIR MASTER CYLINDER HEAVY DUTY DUROMETER
SAE AMSS4383C-2021 Sealing Compound, Topcoat, Fuel Tank, Buna-N Type
DANSK DS/EN 14187-9:2019 Cold applied joint sealants – Test methods – Part 9: Function testing of joint sealants
AS 1099.2QC:1980 Basic environmental testing procedures for electrotechnology, Part 2QC: Tests - Test Qc - Sealing - Container sealing, gas leakage
DIN EN 14187-9 E:2014 Draft Document - Cold applied joint sealants - Test methods - Part 9: Function testing of joint sealants; German version prEN 14187-9:2014
DANSK DS/EN 13880-7:2019 Hot applied joint sealants – Part 7: Function testing of joint sealants
NS-EN 13880-7:2019 Hot applied joint sealants — Part 7: Function testing of joint sealants
DIN 18542 E:2019 Draft Document - Sealing of outside wall joints with impregnated sealing tapes made of cellular plastics - Impregnated sealing tapes - Requirements and testing
SAE AMSS8802D-2015 Sealing Compound, Fuel Resistant, Integral Fuel Tanks and Fuel Cell Cavities
DANSK DS/EN 14241-1:2014 Chimneys - Elastomeric seals and elastomeric sealants - Material requirements and test methods - Part 1: Seals in flue liners
SAE AMSS8802E-2019 Sealing Compound, Fuel Resistant, Integral Fuel Tanks and Fuel Cell Cavities
UNE-EN 14241-1:2007 Chimneys - Elastomeric seals and elastomeric sealants - Material requirements and test methods - Part 1: Seals in flue liners
IAPMO IGC 260-2008 Whirlpool Bathtub with Pressure Sealed Door and Optional Reservoir Tank
DANSK DS/EN 16752:2015 Centrifugal pumps - Test procedure for seal packings
DANSK DS/EN 60068-2-17:1997 Basic environmental testing procedures – Part 2: Tests – Test Q: Sealing
DIN EN 13880-7 E:2017 Draft Document - Hot applied joint sealants - Part 7: Function testing of joint sealants; German and English version prEN 13880-7:2017

Danish Standards Foundation

DS/ISO 17712:2013 Freight containers - Mechanical seals
DS/EN 60512-14-6:2006 Connectors for electronic equipment - Tests and measurements - Part 14-6: Sealing tests - Test 14f: Interfacial sealing
DS/EN 60512-14-2:2006 Connectors for electronic equipment - Tests and measurements - Part 14-2: Sealing tests - Test 14b: Sealing - Fine air leakage
DS/EN 13880-7:2004 Hot applied joint sealants - Part 7: Function testing of joint sealants
DS/EN 60068-2-17:1998 Basic environmental testing procedures - Part 2: Tests - Test Q: Sealing

International Organization for Standardization (ISO)

ISO 17712:2013 Freight containers.Mechanical seals
ISO/PAS 17712:2006 Freight containers - Mechanical seals
ISO 17712:2010 Freight containers - Mechanical seals
ISO/PAS 17712:2003 Freight containers - Mechanical seals
ISO 10648-2:1994 Containment enclosures - Part 2: Classification according to leak tightness and associated checking methods
ISO 10648-1:1997 Containment enclosures - Part 1: Design principles
ISO 11933-1:1997 Components for containment enclosures - Part 1: Glove/bag ports, bungs for glove/bag ports, enclosure rings and interchangeable units
ISO 18185-5:2007 Freight containers - Electronic seals - Part 5: Physical layer
ISO 18185-3:2015 Freight containers - Electronic seals - Part 3: Environmental characteristics
ISO 18185-4:2007 Freight containers - Electronic seals - Part 4: Data protection
ISO 18185-3:2006 Freight containers - Electronic seals - Part 3: Environmental characteristics
ISO 18185-2:2007 Freight containers - Electronic seals - Part 2: Application requirements
ISO 18185-1:2007 Freight containers - Electronic seals - Part 1: Communication protocol
ISO/FDIS 5119:2023 Low temperature sealing capability of elastomeric seals — Test methods

VN-TCVN

TCVN 7620-2007 Freight containers.Mechanical seals

GM North America

GM 9982062-1994 Sealer - Deck Lid Weatherstrip Hot Melt
GM GM9014P-1988 Test for Weld Through Sealers
GM GM9691P-1997 Wear Resistance Test for Weatherstrip
GM GM9802P-1988 Adhesion Test for Sealants
GM GMN4908-2001 Fuel Fill Hose Sealing Test
GM GM9770P-2003 Weatherstrip Coating Cure Test
GM GM9037P-1988 Test for Measuring Expansion of Sealers
GM GM9015P-1988 Test for Weldability of Weld Through Sealers
GM GM9916P-1998 Sag and Sliding Test for Sealers
GM GM9914P-2002 Sealer Compression Density Test
GM GM9031P-1988 Test for Mastic Type Windshield Sealers
GM GM9013P-1988 Test for Viscosity of Adhesives and Sealers

Association Francaise de Normalisation

NF H90-023:2010 Freight containers - Mechanical seals.
NF ISO 5119:2023 Low Temperature Sealing Ability of Elastomeric Seals – Test Methods
NF EN 60512-14-6:2006 Connecteurs pour équipements électroniques - Essais et mesures - Partie 14-6 : essais d'étanchéité - Essai 14f : étanchéité interfaciale
NF EN 60512-14-2:2006 Connecteurs pour équipements électroniques - Essais et mesures - Partie 14-2 : essais d'étanchéité - Essai 14b : étanchéité - Micro-fuite d'air
NF H90-007:1992 Series 1 freight containers. Specification and testing. Part 4 : non-pressurized containers for dry bulk.
NF EN 14187-9:2019 Cold applied joint sealants - Test methods - Part 9: functional testing of joint sealants
NF EN 12835:2001 Watertight closures - Air permeability test
NF T48-109:1994 Asbestos and rubber compressed sheets for seals. Accelerated ageing test on oven.
NF EN 60068-2-17:1995 Essais d'environnement - Partie 2 : essais - Essai Q : étanchéité.
NF P98-880-7*NF EN 13880-7:2019 Hot applied joint sealants - Part 7 : function testing of joint sealants
NF EN IEC 60068-2-17:2023 Essais d'environnement - Partie 2-17 : essais - Essai Q : étanchéité
NF C93-400-14-6*NF EN 60512-14-6:2006 Connectors for electronic equipment - Tests and measurements - Part 14-6 : sealing tests - Test 14f : interfacial sealing
NF A09-108:1979 TESTING FOR LEAK TIGHTNESS. RECOMMENDED PRACTICES FOR TESTING BY MEANS OF A VACUUM CHAMBER.
NF EN 13880-7:2019 Hot applied joint sealants - Part 7: functional test on joint sealants
NF R80-101:1980 Plastics - Tightness test - Torque wrench method.
NF M61-003:1992 Radiation protection. Sealed radioactive sources. Leakage test methods.

United States Navy

NAVY QPL-AMS-S-4383-1 (1)-2002 SEALING COMPOUND, TOPCOAT, FUEL TANK, BUNA-N-TYPE
NAVY QPL-AMS-S-4383-QPD-2010 SEALING COMPOUND, TOPCOAT, FUEL TANK, BUNA-N-TYPE
NAVY QPL-AMS-S-4383-QPD-2012 SEALING COMPOUND, TOPCOAT, FUEL TANK, BUNA-N-TYPE
NAVY QPL-AMS-S-4383-1-2002 SEALING COMPOUND, TOPCOAT, FUEL TANK, BUNA-N-TYPE
NAVY MIL-DTL-6396 F-2008 TANKS, FUEL, OIL, COOLING FLUIDS, INTERNAL, REMOVABLE NON-SELF-SEALING

British Standards Institution (BSI)

BS ISO 17712:2013 Freight containers. Mechanical seals
BS EN 14187-9:2019 Cold applied joint sealants. Test methods. Function testing of joint sealants
BS EN IEC 60068-2-17:2023 Environmental testing - Tests. Test Q: Sealing
BS ISO 5119:2023 Low temperature sealing capability of elastomeric seals. Test methods
PD ISO/TS 7352:2023 Freight containers. NFC or/and QR code seals
BS ISO 18185-5:2007 Freight containers - Electronic seals - Physical layer
BS EN 14187-9:2006 Cold applied joint sealants - Test methods - Function testing of joint sealants
BS EN 13880-7:2019 Hot applied joint sealants. Function testing of joint sealants
BS ISO 18185-3:2006 Freight containers - Electronic seals - Environmental characteristics
BS ISO 18185-4:2007 Freight containers - Electronic seals - Data protection
BS ISO 18185-1:2007 Freight containers - Electronic seals - Communication protocol
BS EN 60068-2-17:1995 Environmental testing. Test methods. Test Q. Sealing
BS ISO 18185-3:2015 Freight containers. Electronic seals. Environmental characteristics
BS ISO 18185-2:2007 Freight containers - Electronic seals - Application requirements
22/30423707 DC BS ISO 5119. Low Temperature Sealing Capability of Elastomeric Seals. Test Methods
BS EN 60512-14-6:2006 Connectors for electronic equipment - Tests and measurements - Sealing tests - Test 14f - Interfacial sealing
BS EN 60512-14-2:2006 Connectors for electronic equipment - Tests and measurements - Sealing tests - Test 14b - Sealing - Fine air leakage
14/30309926 DC BS EN 14187-9. Cold applied joint sealants. Test methods. Part 9. Function testing of joint sealants
BS 6121-1:2005(2011) Mechanical cable glands — Part 1 : Armour glands — Requirements and test methods
BS EN 16752:2015 Centrifugal pumps. Test procedure for seal packings

Aerospace Industries Association/ANSI Aerospace Standards

AIA/NAS NAS 13-1947 Seal - Control Tube, Bellows Type (Rev. 1)
AIA/NAS NAS 14-1947 Retainer - Bellows Type Seal, Control Tube (Rev. 1)

CZ-CSN

CSN 37 0119-1962 Sealing cap for plastic box for electrical installation
CSN 50 5309-1983 Folding boxes with sealing flaps for utomatic packing
CSN 40 4301-1971 Sealed radioactive sources. Testing of leakage and contamination.

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc.

ASHRAE 117-1992 Method of Testing Closed Refrigerators
ASHRAE 117-2002 Method of Testing Closed Refrigerators

Defense Logistics Agency

DLA MS53075 REV B NOTICE 1-1999 CAP, FUEL TANK-TACTICAL VEHICLE, NON-VENTED
DLA MS53075 REV B-1990 CAP, FUEL TANK-TACTICAL VEHICLE, NON-VENTED

American National Standards Institute （ANSI)

ANSI/ASHRAE 117-2002 Method of Testing Closed Refrigerators
ANSI/ASME PTC12.1-2000 Performance Test Code - Closed Feedwater Heaters

AT-ON

ONORM B 3723-1999 Sealing of glazings with sealants - Sealants - Requirements and testing - Marking of conformity

U.S. Military Regulations and Norms

ARMY MIL-S-11388 D-1991 SEALING MATERIAL FOR METAL CONTAINER SEAMS
ARMY MIL-S-11388 D REINST NOTICE 2-1999 SEALING MATERIAL FOR METAL CONTAINER SEAMS

Japanese Industrial Standards Committee (JISC)

JIS A 1439:2022 Testing methods of sealants for sealing and glazing in buildings
JIS Z 0238:1995 Testing methods for sealed flexible packages
JIS C 5402-14-6:2016 Connectors for electronic equipment -- Tests and measurements -- Part 14-6: Sealing tests -- Test 14f: Interfacial sealing

GM Europe

GME GMI L-7B01E-1-1996 Flat seals on gearboxes (functional and long-term testing on a test bench) (English/German)
GME GMI L-7B-1-1997 Friction torque and sealing performance of deep groove ball bearings for gearbox seals (English/German)
GME L-0-3-2013 Rotary Shaft Seal Durability Test (Revision 6; English/German; Includes Appendix A,B,C,D and E)
GME QE 001207-1987 Elastomerdichtungen f黵 den Renkdeckelverschlu?des Tankes Elastomer Seals for Bayonet Fuel Caps German

RU-GOST R

GOST 19369-1974 Ledges with packing of aluminium core boxes. Dimensions
GOST R 53424-2009 Mechanical seals for freight containers. General technical requirements
GOST 34766-2021 Mechanical seals for freight containers. General technical requirements
GOST 19399-1974 Sand blast bushes for core boxes. Design and dimensions

KR-KS

KS V 8817-2014(2024) Marine cable glands for electric watertight box
KS T 1338-2013(2023) Standard practice for methods of closing, sealing and reinforcing fiberboard boxes
KS T ISO 18185-5-2013(2023) Freight containers－Electronic seals－Part 5：Physical layer
KS C IEC 60512-14-6-2009 Connectors for electronic equipment－Tests and measurements－Part 14-6：Sealing tests－Test 14f：Interfacial sealing
KS T ISO 18185-3-2013(2023) Freight containers－Electronic seals－Part 3：Environmental characteristics
KS T ISO 18185-2-2013(2023) Freight containers－Electronic seals－Part 2：Application requirements
KS T ISO 18185-4-2013(2023) Freight containers－Electronic seals－Part 4：Data protection
KS T ISO 18185-1-2013(2023) Freight containers－Electronic seals－Part 1：Communication protocol

RO-ASRO

STAS 6577-1970 Rolling bcaring cases FELT RING OR STRIP SEALINGS
STAS 10811/3-1984 SEALED RADIOACTIVE SOURCES Test methods
STAS SR ISO 9978:1996 Radiation protectlon - Sealed redioactive sources Leakage test methods
STAS 8393/26-1984 Environmental testing procedures SEALING Test Q
STAS 9497-1974 SEALING PAPERS AND BOARDS Determination of seal strength

German Institute for Standardization

DIN 18545-2:2008 Sealing of glazings with sealants - Part 2: Sealants, designation, requirements, testing
DIN EN 60512-14-6:2006-11 Connectors for electronic equipment - Tests and measurements - Part 14-6: Sealing tests - Test 14f: Interfacial sealing (IEC 60512-14-6:2006); German version EN 60512-14-6:2006 / Note: DIN IEC 60512-7 (1994-05) remains valid alongside this standard unt...
DIN EN 60512-14-2:2006-11 Connectors for electronic equipment - Tests and measurements - Part 14-2: Sealing tests - Test 14b: Sealing - Fine air leakage (IEC 60512-14-2:2006); German version EN 60512-14-2:2006 / Note: DIN IEC 60512-7 (1994-05) remains valid alongside this stand...
DIN EN 13880-7:2019 Hot applied joint sealants - Part 7: Function testing of joint sealants
DIN EN 13880-7:2019-06 Hot applied joint sealants - Part 7: Function testing of joint sealants; German version EN 13880-7:2019
DIN 18545-2:2001 Sealing of glazings with sealants - Part 2: Sealants, designation, requirements, testing
DIN EN 14241-1:2013-11 Chimneys - Elastomeric seals and elastomeric sealants - Material requirements and test methods - Part 1: Seals in flue liners; German version EN 14241-1:2013
DIN 18542:2020-04 Impregnated sealing tapes made of cellular plastics for sealing of outside wall joints - Requirements and testing

PT-IPQ

E 221-1968 Filter. Tightness test

AENOR

UNE 85232:1996 WINDOWS. SEALING. CLASSIFICATION, DESIGNATION AND TEST METHODS OF SEALINGS.
UNE-EN 60068-2-17:1996 ENVIRONMENTAL TESTING. PART 2: TESTS. TEST Q: SEALING.
UNE-EN 60512-14-6:2007 Connectors for electronic equipment - Tests and measurements -- Part 14-6: Sealing tests - Test 14f: Interfacial sealing (IEC 60512-14-6:2006).
UNE-EN 13880-7:2004 Hot applied joint sealants - Part 7: Function testing of joint sealants
UNE-EN 60512-14-2:2007 Connectors for electronic equipment - Tests and measurements -- Part 14-2: Sealing tests - Test 14b: Sealing - Fine air leakage (IEC 60512-14-2:2006).

American Society for Testing and Materials (ASTM)

ASTM D5486/D5486M-06(2012) Standard Specification for Pressure-Sensitive Tape for Packaging, Box Closure, and Sealing
ASTM F2598-22 Standard Consumer Safety Specification for Sealed Storage Chests such as Cedar Chests, Hope Chests, Blanket Chests, Keepsake Chests
ASTM D5486/D5486M-06 Standard Specification for Pressure-Sensitive Tape for Packaging, Box Closure, and Sealing
ASTM C1375-00(2020) Standard Guide for Substrates Used in Testing Building Seals and Sealants
ASTM D1974-98(2003) Standard Practice for Methods of Closing, Sealing, and Reinforcing Fiberboard Boxes
ASTM D1974-98 Standard Practice for Methods of Closing, Sealing, and Reinforcing Fiberboard Boxes
ASTM F1315-00(2014) Standard Test Method for Density of a Sheet Gasket Material
ASTM F112-00(2013) Standard Test Method for Sealability of Enveloped Gaskets
ASTM F1315-00(2006) Standard Test Method for Density of a Sheet Gasket Material
ASTM F112-00(2019) Standard Test Method for Sealability of Enveloped Gaskets
ASTM F112-00e1 Standard Test Method for Sealability of Enveloped Gaskets
ASTM F1315-00 Standard Test Method for Density of a Sheet Gasket Material
ASTM F112-00(2006) Standard Test Method for Sealability of Enveloped Gaskets
ASTM D5419-95 Standard Test Method for Environmental Stress Crack Resistance (ESCR) of Threaded Plastic Closures
ASTM D5419-09 Standard Test Method for Environmental Stress Crack Resistance (ESCR) of Threaded Plastic Closures

The American Road & Transportation Builders Association

AASHTO TP 86-2010 Standard Method of Test for Accelerated Aging of Bituminous Sealants and Fillers Using a Vacuum Oven
AASHTO T 253-2002 Standard Method of Test for Coated Dowel Bars

ES-UNE

UNE-EN 14187-9:2020 Cold applied joint sealants - Test methods - Part 9: Function testing of joint sealants
UNE-EN 13880-7:2020 Hot applied joint sealants - Part 7: Function testing of joint sealants
UNE-EN 16752:2015 Centrifugal pumps - Test procedure for seal packings

Standard Association of Australia （SAA）

AS IEC 60068.2.17:2023 Environmental testing, Part 2.17: Tests — Test Q: Sealing
IEC 60068-2-17:2023 Environmental testing — Part 2-17: Tests — Test Q: Sealing

FI-SFS

SFS 3147-1975 plastic pipe. Connection seal test D
SFS 3148-1976 plastic pipe. Seal load test
SFS 3410-1978 plastic pipe. Joint tightness test

European Committee for Electrotechnical Standardization（CENELEC）

EN IEC 60068-2-17:2023 Environmental testing - Part 2-17: Tests - Test Q: Sealing
HD 138 S2-1990 Sealing Test for Professional Waveguide Tubing and Assemblies

GOSTR

GOST R 53424-2018 Mechanical seals for freight containers. General technical requirements

GM Daewoo

GMKOREA EDS-T-4601-2011 Test Procedure for Radial Lip Seal

(U.S.) Ford Automotive Standards

FORD FLTM BP 003-2-2000 FRICTION TEST FOR WEATHERSTRIP COATINGS
FORD FLTM EU-BQ 009-2-2000 SEAL TEST FOR ANODIZED ALUMINUM
FORD FLTM BV 012-1-2000 TEST FOR LOCKING STRENGTH OF SEALERS
FORD FLTM BV 130-1-2000 SEALER FUME TEST - EFFECT OF SEALER FUMES ON PAINT ADHESION
FORD WSK-M4G297-B-1998 SEALER, POLYVINYL CHLORIDE (PVC), PRIMER OVEN CURING, PAINTABLE
FORD FLTM BV 116-3-2001 WASH RESISTANCE TEST FOR SEALERS AND ADHESIVES
FORD FLTM BV 109-1-2000 WELDING ACCEPTANCE TEST FOR WELD THROUGH SEALERS

Lithuanian Standards Office

LST EN 60512-14-6-2006 Connectors for electronic equipment - Tests and measurements -- Part 14-6: Sealing tests - Test 14f: Interfacial sealing (IEC 60512-14-6:2006)
LST EN 13880-7-2004 Hot applied joint sealants - Part 7: Function testing of joint sealants
LST EN 60512-14-2-2006 Connectors for electronic equipment - Tests and measurements -- Part 14-2: Sealing tests - Test 14b: Sealing - Fine air leakage (IEC 60512-14-2:2006)
LST EN 14241-1-2006 Chimneys - Elastomeric seals and elastomeric sealants - Material requirements and test methods - Part 1: Seals in flue liners

YU-JUS

JUS N.A5.866-1984 Basic environmental testing procedures. Survey of sealing tests. Q tests
JUS N.A5.865-1985 Basic environmentai testing procedures. Test Ql - Sealing Bomb pressure test
JUS N.A5.862-1984 Basic environmental testingprocedures. Test Qf: Sealing immersion

IT-UNI

UNI 7418-1975 Nuclear installations. Leakage rate tests for containement systems.

International Electrotechnical Commission (IEC)

IEC 60512-14-6:2006 Connectors for electronic equipment - Tests and measurements - Part 14-6: Sealing tests - Test 14f: Interfacial sealing

European Committee for Standardization (CEN)

EN 16752:2015 Centrifugal pumps - Test procedure for seal packings
EN 14241-1:2013 Chimneys - Elastomeric seals and elastomeric sealants - Material requirements and test methods - Part 1: Seals in flue liners

WRC - Welding Research Council

BULLETIN 507- LONG TERM PRESSURIZED GRAPHITE GASKETED JOINT TESTS

U.S. Air Force

AIR FORCE MIL-C-83019 VALID NOTICE 1-1987 COATING, POLYURETHANE, FOR PROTECTION OF INTEGRAL FUEL TANK SEALING COMPOUND
AIR FORCE MIL-C-83019 (3)-1995 COATING, POLYURETHANE, FOR PROTECTION OF INTEGRAL FUEL TANK SEALING COMPOUND
AIR FORCE MIL-C-83019-1968 COATING, POLYURETHANE, FOR PROTECTION OF INTEGRAL FUEL TANK SEALING COMPOUND
AIR FORCE MIL-C-83019 NOTICE 2-1997 COATING, POLYURETHANE, FOR PROTECTION OF INTEGRAL FUEL TANK SEALING COMPOUND

BELST

STB GOST R 51827-2002 Packagings. Leak-proofness and hydraulic pressure testing methods

SE-SIS

SIS SS 22 44 23-1983 Sealed glazing unit — Testing - Accelerated ageing

International Federation of Trucks and Engines

NAVISTAR CEMS DT-17-2013 Torque To Seal Test For Hydraulic Brake Lines

CEN - European Committee for Standardization

EN 14241-1:2005 Chimneys - Elastomeric seals and elastomeric sealants - Material requirements and test methods - Part 1: Seals in flue liners