iec charging

iec charging, Total:89 items.

The international standard classification for "iec charging" includes: .

The Chinese standard classification for "iec charging" includes: .

German Institute for Standardization

DIN EN 61044:1994-05 Opportunity-charging of lead-acid traction batteries (IEC 61044:1990); German version EN 61044:1992 / Note: To be replaced by DIN IEC 21/520/CD (2000-12).
DIN IEC 61850-7-4_A1_Sept2006_ENTWURF Power quality supplements IEC 61850-5 and IEC 61850-7-4
DIN IEC 62196-1 E:2010 Draft Document - Plugs, socket-outlets, vehicle couplers and vehicle inlets - Conductive charging of electric vehicles - Part 1: Charging of electric vehicles up to 250 A a.c. and 400 A d.c. (IEC 23H/222/CD:2010)
DIN IEC 62196-1 E:2010-05 Draft Document - Plugs, socket-outlets, vehicle couplers and vehicle inlets - Conductive charging of electric vehicles - Part 1: Charging of electric vehicles up to 250 A a.c. and 400 A d.c. (IEC 23H/222/CD:2010)
DIN IEC 62752:2012 In-Cable Residual Current Device for mode 2 charging of electric road vehicles (IC-RCD) (IEC 23E/743/CD:2012)
DIN EN IEC 61851-1:2019 Electric vehicle conductive charging system - Part 1: General requirements (IEC 61851-1:2017); German version EN IEC 61851-1:2019
DIN EN IEC 63119-1:2020 Information exchange for electric vehicle charging roaming service - Part 1: General (IEC 63119-1:2019); German version EN IEC 63119-1:2019
DIN IEC 60855 E:2003 Draft Document - Live working - Insulating foam-filled tubes and solid rods (IEC 78/448/CD:2002)
DIN IEC 62955 E:2016 Draft Document - Residual Direct Current Monitoring Device to be used for Mode 3 charging of Electric Vehicle (IEC 23E/917/CD:2015)
DIN EN IEC 61851-1:2019-12 Electric vehicle conductive charging system - Part 1: General requirements (IEC 61851-1:2017); German version EN IEC 61851-1:2019
DIN EN IEC 63119-2:2023 Information exchange for electric vehicle charging roaming service - Part 2: Use cases (IEC 63119-2:2022); German version EN IEC 63119-2:2022
DIN IEC 62752 E:2012 Draft Document - In-Cable Residual Current Device for mode 2 charging of electric road vehicles (IC-RCD) (IEC 23E/743/CD:2012)
DIN IEC 61851-1 E:2008 Draft Document - Electric vehicle conductive charging system - Part 1: General requirements (IEC 69/156/CD:2008)
DIN IEC 60855 E:2003-03 Draft Document - Live working - Insulating foam-filled tubes and solid rods (IEC 78/448/CD:2002)
DIN EN IEC 61851-25:2021 Electric vehicle conductive charging system - Part 25: DC EV supply equipment where protection relies on electrical separation (IEC 61851-25:2020); German version EN IEC 61851-25:2021
DIN EN IEC 61851-21-2:2021 Electric vehicle conductive charging system - Part 21-2: Electric vehicle requirements for conductive connection to an AC/DC supply - EMC requirements for off board electric vehicle charging systems (IEC 61851-21-2:2018); German version EN IEC 61851-21-2:
DIN EN 61851-23-1 E:2017 Draft Document - Electric vehicle conductive charging system - Part 23-1: DC Charging with an automatic connection system (IEC 69/495/CD:2017)
DIN EN 61851-23-1 E:2017-08 Draft Document - Electric vehicle conductive charging system - Part 23-1: DC Charging with an automatic connection system (IEC 69/495/CD:2017)
DIN IEC 62752 E:2012-09 Draft Document - In-Cable Residual Current Device for mode 2 charging of electric road vehicles (IC-RCD) (IEC 23E/743/CD:2012)
DIN EN IEC 63119-1:2020-03 Information exchange for electric vehicle charging roaming service - Part 1: General (IEC 63119-1:2019); German version EN IEC 63119-1:2019
DIN EN IEC 62752:2021-07 Draft Document - In-cable control and protection device for mode 2 charging of electric road vehicles (IC-CPD) (IEC 23E/1212/CD:2020); Text in German and English
DIN EN IEC 63119-2:2023-07 Information exchange for electric vehicle charging roaming service - Part 2: Use cases (IEC 63119-2:2022); German version EN IEC 63119-2:2022
DIN IEC 63119-1 E:2018 Draft Document - Information exchange for Electric Vehicle charging roaming service - Part 1:General (IEC 69/541/CD:2017); Text in German and English
DIN IEC 61851-1 E:2008-12 Draft Document - Electric vehicle conductive charging system - Part 1: General requirements (IEC 69/156/CD:2008)
DIN IEC 62955 E:2016-04 Draft Document - Residual Direct Current Monitoring Device to be used for Mode 3 charging of Electric Vehicle (IEC 23E/917/CD:2015)
DIN EN IEC 60086-4 Supplement 1:2021 Primary batteries - Part 4: Safety of lithium batteries; Supplement 1: Interpretation Sheet 1 (IEC 60086-4:2019/ISH1:2020)
DIN IEC 61436 E:2001 Draft Document - Secondary cells and batteries containing alkaline or other non-acid electrolytes - Sealed nickel-metal hydride rechargeable single cells (IEC 21A/303/CD:2000)
DIN EN IEC 61851-25:2021-10 Electric vehicle conductive charging system - Part 25: DC EV supply equipment where protection relies on electrical separation (IEC 61851-25:2020); German version EN IEC 61851-25:2021
DIN EN IEC 60376:2019 Specification of technical grade sulfur hexafluoride (SF<(Index)6>) and complementary gases to be used in its mixtures for use in electrical equipment (IEC 60376:2018); German version EN IEC 60376:2018
DIN EN IEC 60599:2023 Mineral oil-filled electrical equipment in service - Guidance on the interpretation of dissolved and free gases analysis (IEC 60599:2022); German version EN IEC 60599:2022
DIN EN IEC 63119-2 E:2021 Draft Document – Information exchange for Electric Vehicle charging roaming service – Part 2: Use cases (IEC 69/730/CD:2020); Text in German and English
DIN EN IEC 60086-4 Beiblatt 1:2021 Primary batteries - Part 4: Safety of lithium batteries; Supplement 1: Interpretation Sheet 1 (IEC 60086-4:2019/ISH1:2020)
DIN IEC 62117:2001-10 Nuclear power plants - Pressurized light water reactors - Monitoring adequate cooling within the core during cold shutdown (IEC 62117:1999)

Lithuanian Standards Office

LST EN 61044-2001 Opportunity-charging of lead-acid traction batteries (IEC 61044:1990)
LST EN IEC 61851-25:2021 Electric vehicle conductive charging system - Part 25: DC EV supply equipment where protection relies on electrical separation (IEC 61851-25:2020)

British Standards Institution (BSI)

24/30494577 DC BS IEC 63584 Open Charge Point Protocol (OCPP) (Fast track)
PD IEC TS 62893-4-2:2021 Charging cables for electric vehicles of rated voltages up to and including 0,6/1 kV. Cables for DC charging according to mode 4 of IEC 61851-1. Cables intended to be used with a thermal management system
BS PD IEC TS 62893-4-2:2021 Charging cables for electric vehicles of rated voltages up to and including 0,6/1 kV. Cables for DC charging according to mode 4 of IEC 61851-1. Cables intended to be used with a thermal management system

European Committee for Electrotechnical Standardization（CENELEC）

EN 61044:1992 Opportunity-Charging of Lead-Acid Traction Batteries

European Committee for Standardization (CEN)

prEN 61044-1992 Opportunity-charging of lead-acid traction batteries (IEC 1044:1990)

Indonesia Standards

SNI IEC 61851-23:2014 Conductive vehicle charging system – Part 23: Electric vehicle charging station a.s. (IEC 61851-23: 2014, IDT, Eng)
SNI IEC 61851-24:2014 Sistem pengisian daya konduktif kendaraan listrik - Bagian 24: Komunikasi digital antara stasiun pengisian kendaraan listrik a.s. dan kendaraan Iistrik untuk kendali pengisian a.s. (IEC 61851-24: 2014, IDT, Eng)
SNI IEC 62893-3:2017 Charging cables for electric vehicles with rated voltage up to 0.6/1 kV – Part 3: Cables for AB charging according to modes 1, 2 and 3 of IEC 61851-1 with rated voltage up to 450/750 V (IEC 62893-3:2017, IDT)
SNI IEC 61851-1:2017 Sistem pengisian konduktif kendaraan Iistrik- Bagian 1: Persyaratan umum (IEC 61851-1: 2017, IDT, Eng)
SNI IEC 60076-15:2015 Transformator daya - Bagian 15: Transformator daya terisi gas (IEC 60076-15:2008, IDT)
SNI IEC 62893-1:2017 Charging cable for electric vehicles with rated voltage up to 0.6/1 kV – Part 1: General requirements (IEC 62893-1:2017, IDT)
SNI IEC 62893-2:2017 Charging cable for electric vehicles with rated voltage up to 0.6/1 kV – Part 2: Test Methods (IEC 62893-2:2017, IDT, Eng)
SNI IEC 61851-21-1:2017 Sistem pengisian konduktif kendaraan listrik - Bagian 21-1: Persyaratan EMC pengisi di dalam kendaraan listrik untuk hubungan konduktif ke suplai a.b./a.s. (IEC 61851-21-1: 2017, IDT, Eng)
SNI IEC 60038:2013 IEC standard voltage

OVE Austrian Electrotechnical Association

OVE EN IEC 63370:2021 Lithium-Ion Batteries and Charging Systems - Safety (IEC 116/493/CDV) (english version)
OVE EN IEC 61851-23-1:2020 Electric vehicle conductive charging system - Part 23-1: DC electric vehicle charging station with an automated connection device (IEC 69/727/CDV)
OVE EN IEC 61851-25:2021 Electric vehicle conductive charging system - Part 25: DC EV supply equipment where protection relies on electrical separation (( IEC 61851-25:2020) EN IEC 61851-25:2021) (german version)
OVE EN IEC 63119-2:2021 Information exchange for Electric Vehicle charging roaming service - Part 2: Use cases (IEC 69/795/CDV) (english version)

International Electrotechnical Commission (IEC)

IEC 60099-1A:1965 First supplement Replaced by IEC 99-5
IEC 62893-4-1:2020 Charging cables for electric vehicles of rated voltages up to and including 0,6/1 kV - Part 4-1: Cables for DC charging according to mode 4 of IEC 61851-1 - DC charging without use of a thermal manage
IEC 62893-3:2017 Charging cables for electric vehicles for rated voltages up to and including 0,6/1 kV - Part 3: Cables for AC charging according to modes 1, 2 and 3 of IEC 61851-1 of rated voltages up to and includin
IEC 60623/AMD1:1992 Vented nickel-cadmium prismatic rechargeable single cells; amendment 1 to IEC 60623:1990
IEC 60417O:1996 Graphical symbols for use on equipment; Supplement 14 to IEC 417:1973
IEC 60285:1999 Alkaline secondary cells and batteries - Sealed nickel-cadmium cylindrical rechargeable single cells
IEC TS 62893-4-2:2021 Charging cables for electric vehicles of rated voltages up to and including 0,6/1 kV - Part 4-2: Cables for DC charging according to mode 4 of IEC 61851-1 - Cables intended to be used with a thermal m
IEC 61044:1990 Opportunity-Charging of Lead-Acid Traction Batteries (Edition 1.0)
IEC 60718:1982 Chargers for electric road vehicles
IEC 60038:2009 IEC standard voltages
IEC 60623:1978 Open nickel-cadmium prismatic rechargeable cells
IEC 60623:1983 Open-nickel-cadmium prismatic rechargeable cells
IEC 60038:1983 IEC standard voltages
IEC 63584:2025 Open Charge Point Protocol (OCPP)
IEC 60038:2002 IEC standard voltages
IEC 63584:2024 Open Charge Point Protocol (OCPP)
IEC 61851-22:2001 Electric vehicle conductive charging system - Part 22: AC electric vehicle charging station
IEC/PAS 62204:2000 Connection system for conductive charging of electric vehicles Part 2: DC charging interface
IEC 60509:1976 Sealed nickel-cadmium button rechargeable single cells

GCC Standardization Organization

GSO IEC 62893-4-1:2022 Charging cables for electric vehicles of rated voltages up to and including 0,6/1 kV - Part 4-1: Cables for DC charging according to mode 4 of IEC 61851-1 - DC charging without use of a thermal management system
GSO IEC 62893-3:2022 Charging cables for electric vehicles for rated voltages up to and including 0,6/1 kV - Part 3: Cables for AC charging according to modes 1, 2 and 3 of IEC 61851-1 of rated voltages up to and including 450/750 V

Danish Standards Foundation

DANSK DS/IEC 62893-4-1:2020 Charging cables for electric vehicles of rated voltages up to and including 0,6/1 kV – Part 4-1: Cables for DC charging according to mode 4 of IEC 61851-1 – DC charging without use of a thermal management system
DANSK DS/IEC 62893-3:2017 Charging cables for electric vehicles for rated voltages up to and including 0,6/1 kV – Part 3: Cables for AC charging according to modes 1, 2 and 3 of IEC 61851-1 of rated voltages up to and including 450/750 V
DANSK DS/IEC TS 62893-4-2:2021 Charging cables for electric vehicles of rated voltages up to and including 0,6/1 kV – Part 4-2: Cables for DC charging according to mode 4 of IEC 61851-1 – Cables intended to be used with a thermal management system

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO IEC 62893-4-1:2023 Charging cables for electric vehicles of rated voltages up to and including 0,6/1 kV - Part 4-1: Cables for DC charging according to mode 4 of IEC 61851-1 - DC charging without use of a thermal management system
BH GSO IEC 62893-3:2023 Charging cables for electric vehicles for rated voltages up to and including 0,6/1 kV - Part 3: Cables for AC charging according to modes 1, 2 and 3 of IEC 61851-1 of rated voltages up to and including 450/750 V

Korean Agency for Technology and Standards (KATS)

KS C IEC 62893-4-1:2021 Charging cables for electric vehicles of rated voltages up to and including 0.6/1 kV — Part 4-1: Cables for DC charging according to mode 4 of KS R IEC 61851-1 — DC charging without use of a thermal m
KS C IEC 62893-4-1-2021 Charging cables for electric vehicles of rated voltages up to and including 0.6/1 kV — Part 4-1: Cables for DC charging according to mode 4 of KS R IEC 61851-1 — DC charging without use of a thermal m
KS C IEC 62893-3:2020 Charging cables for electric vehicles of rated voltages up to and including 0.6/1 kV — Part 3: Cables for AC charging according to modes 1, 2 and 3 of KS R IEC 61851-1 of rated voltages up to and incl
KS C IEC 62893-3-2020 Charging cables for electric vehicles of rated voltages up to and including 0.6/1 kV — Part 3: Cables for AC charging according to modes 1, 2 and 3 of KS R IEC 61851-1 of rated voltages up to and incl
KS C IEC 60565A-2014 Calibration of hydrophones(First supplement to publication IEC 60565)

Standard Association of Australia （SAA）

AS IEC 61851.23:2014 Electric vehicle conductive charging system, Part 23: D.C electric vehicle charging station
AS IEC 61851.24:2014 Electric vehicle conductive charging system, Part 24: Digital communication between a d.c. EV charging station and an electric vehicle for control of d.c. charging

Association for Electrical, Electronic & Information Technologies (VDE)

VDE 0122-1-2019*DIN EN IEC 61851-1:2019 Electric vehicles for conductive charging systems Part 1: General requirements (IEC 61851-1:2017)

Gosstandart of Russia

GOST IEC 62893-3-2020 Charging cables for electric vehicles with rated voltages up to and including 0,6/1 kV. Part 3: AC charging cables according to modes 1, 2 and 3 of IEC 61851-1 with rated voltages up to 450/750..

Standards New Zealand

NZS/IEC 38:1983 IEC standard voltages