Fiber Collimation

Fiber Collimation, Total:200 items.

The international standard classification for "Fiber Collimation" includes: Optical equipment , Natural fibres .

The Chinese standard classification for "Fiber Collimation" includes: Optical equipment , Magnifier and microscope , Wool textile in general , Length Measurement .

---

Professional Standard - Machinery

• JB/T 10556-2006 Optical fibre diameter analyser

Military Standard of the People's Republic of China-General Armament Department

• GJB 10253-2021 High Power Fiber Laser Specifications
• GJB 1919A-2009 Connectors,fibre opic,circular,environmental resistant,hermaphroditic,general specification for

Taiwan Provincial Standard of the People's Republic of China

• CNS 12373-1988 Method of Test for Fiber Optic Devices ( FOTP-58 Core Diameter Measurement of Graded-Index Optical Fibers )

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

• GB/T 20732-2006 Optical fiber diameter analyser
• GB/T 21030-2007 Test method for the mean and distribution of fibre diameter of wool and other animal fibre—Optical fibre diameter analyser (OFDA)
• GB/T 35935-2018 Measurement of the mean and distribution of animal fibre diameter―Laserscan fibre diameter analysis method

Inner Mongolia Provincial Standard of the People's Republic of China

• DB15/T 883-2015 Mean fiber diameter and fiber diameter distribution determination method Sirolan (sirolan) - laser scanning fiber diameter analyzer method

Professional Standard - Post and Telecommunication

• YD/T 903-1997 Technical conditions of mode field diameters for optical fibers

Group Standards of the People's Republic of China

• T/CDHA 11-2022 Technical conditions of optical fiber monitoring system for directly buried heating pipeline
• T/CIPR 047.1-2022 Same and different frequency forwarding function direct release station: optical fiber technology
• T/GSEE 0010-2023 Technical specification for optical fiber DC current transformers
• T/GSEE 10-2023 Fiber Optic DC Current Transformer Technical Specification

National Metrological Verification Regulations of the People's Republic of China

• JJG 896-1995 Characterization Systems for the Loss and Mode Field Diameter of Optical Fiber

National Metrological Technical Specifications of the People's Republic of China

• JJF 2073-2023 Calibration Specification for Fiber Fusion Splicers

American Society for Testing and Materials (ASTM)

• ASTM D6500-00(2012)e1 Standard Test Method for Diameter of Wool and Other Animal Fibers Using an Optical Fiber Diameter Analyser
• ASTM D6500-00(2006) Standard Test Method for Diameter of Wool and Other Animal Fibers Using an Optical Fiber Diameter Analyser
• ASTM D6500-00 Standard Test Method for Diameter of Wool and Other Animal Fibers Using an Optical Fiber Diameter Analyser
• ASTM D6466-99(2005) Standard Test Method for Diameter of Wool and Other Animal Fibers By Sirolan-Laserscan Fiber Diameter Analyser
• ASTM D6466-99 Standard Test Method for Diameter of Wool and Other Animal Fibers By Sirolan-Laserscan Fiber Diameter Analyser
• ASTM G197-14 Standard Table for Reference Solar Spectral Distributions: Direct and Diffuse on 20° Tilted and Vertical Surfaces

(U.S.) Telecommunications Industries Association

• TSB-62-10-2008 Procedure for Applying Loads Directly to the Fiber in Optical Connectors or Fiber/Ferrule Assemblies to Quantify Fiber Pushback
• TIA TSB-62-2010 Procedure for Applying Loads Directly to the Fiber in Optical Connectors or Fiber/Ferrule Assemblies to Quantify Fiber Pushback
• TSB62-10-1999 ITM-10 Procedure for Applying Loads Directly to the Fiber in Optical Connectors or Fiber/Ferrule Assemblies to Quantify Fiber Pushback
• EIA/TIA-455-58A-1990 FOTP-58 Core Diameter Measurement of Graded-Index Optical Fibers
• EIA/TIA-455-48B-1990 FOTP-48 Measurement of Optical Fiber Cladding Diameter Using Laser-Based Instruments
• TIA/EIA-455-191-1998 FOTP-191 Measurement of Mode Field Diameter of Single-Mode Optical Fiber
• TIA TSB-62-10-2008 Procedure for Applying Loads Directly to the Fiber in Optical Connectors or Fiber/Ferrule Assemblies to Quantify Fiber Pushback
• TIA EIA-455-48-B-1990(2014) Measurement of Optical Fiber Cladding Diameter Using Laser-Based Instructions
• TIA-455-191-B-2003 FOTP- 191 IEC-60793-1-45 Optical Fibres- Part 1-45: Measurement Methods and Test Procedures- Mode Field Diameter
• TIA SP 3-3832-RV1-A-2007 Detail specification for 50-祄 core diameter/125-祄 cladding diameter class Ia graded-index multimode optical fibers To be published as TIA-492AAAB-A
• TIA SP 3-0006-RV2-A-2007 Detail specification for 62.5-祄 core diameter/125-祄 cladding diameter class Ia graded-index multimode optical fibers To be published as TIA-492AAAA-B
• TIA TSB62-10-1999 ITM-10 Procedure for Applying Loads Directly to the Fiber in Optical Connectors or Fiber/Ferrule Assemblies to Quantify Fiber Pushback
• EIA/TIA-492AAAA-1989 Detail Specification for 62.5-Micrometer Core Diameter/125-Micrometer Cladding Diameter Class Multimode Graded Index Optical Waveguide Fibers
• TIA-455-191-B-2003(2013) Optical Fibres - Part 1-45: Measurement Methods and Test Procedures - Mode Field Diameter
• 455-164-1986 Scanning Far-Field@ Fiber Single-Mode@ Measurement of Mode Field Diameter
• TIA-492AAAC-A-2003 Detail Specification for 850-nm Laser-Optimized, 50-um Core Diameter/125-um Cladding Diameter Class Ia Graded-Index Multimode Optical Fibers
• TIA-492AAAD-2009 Detail Specification for 850-nm Laser- Optimized 50-μm Core Diameter/125-μm Cladding Diameter Class la Graded-Index Multimode Optical Fibers Suitable for Manufacturing OM4 Cabled Optical Fiber
• TIA-455-48-B-2000(2014) FOTP- 48 Measurement of Optical Fiber Cladding Diameter Using Laser-Based Instructions
• TIA-455-48-B-1990 FOTP- 48 Measurement of Optical Fiber Cladding Diameter Using Laser-Based Instructions
• TIA-455-58-B-2001 FOTP-58 Core Diameter Measurement of Graded-Index Optical Fibers (ANSI APPROVAL WITHDRAWN JUNE 2003)
• TIA-492AAAC-2002 Detail Specification for 850-nm Laser-Optimized@ 50-um Core Diameter/125-um Cladding Diameter Class Ia Graded-Index Multimode Optical Fibers
• TIA/EIA-568-B.3-2000 Optical Fiber Cabling Components Standard
• TIA-492AAAC-B-2009 Detail Specification for 850-nm Laser- Optimized@ 50-μm Core Diameter/125-μm Cladding Diameter Class Ia Graded-Index Multimode Optical Fibers
• TIA/EIA-492AAAB-1998 Detail Specification for 50-Micrometer Core Diameter/125-Micrometer Cladding Diameter Class Ia Graded-Index Multimode Optical Fibers
• TIA/EIA-492AAAA-A-1998 Detail Specification for 62.5-Micrometer Core Diameter/125-Micrometer Cladding Diameter Class Ia Graded-Index Multimode Optical Fibers
• TIA-472F000-2005 Sectional Specification (Adopted ICEA S-110-717-2003) Standard for Optical Fiber Drop Cable
• TIA-492AAAA-B-2009 Detail Specification for 62.5-μm Core Diameter/125-μm Cladding Diameter Class Ia Graded-Index Multimode Optical Fibers
• EIA/TIA-455-164A-1991 FOTP-164 Single-Mode Fiber@ Measurement of Mode Field Diameter by Far-Field Scanning
• TIA SP 3-3894-RV3-1-2007 Optical Fiber Cabling Component Standard To be published as ANSI/TIA-568-C.3
• TIA/EIA-472DAAA-1993 Detail Specification for All-Dielectric Fiber Optic Communications Cable for Outside Plant Use@ Containing Class Ia@ 62.5 Micro Meters Core Diameter/125 Micro Meters Cladding Diameter/250 Micro Meters Coating Diameter Optical Fiber(s)
• TIA/EIA-604-10-1999 FOCIS 10 Fiber Optic Intermateability Standard

International Telecommunication Union (ITU)

• ITU-T L.110-2025 Optical fibre cables for direct surface application
• ITU-T L.101-2024 Optical fibre cables for directly buried application
• ITU-T SERIES G SUPP 40-2006 Optical fibre and cable Recommendations and standards guideline Study Group 15
• ITU-T G SUPP 40-2010 Optical fibre and cable Recommendations and standards guideline
• ITU-T G Suppl. 40-2010 Optical fibre and cable Recommendations and standards guideline
• ITU-T G Suppl. 40-2004 Optical fibre and cable Recommendations and standards guideline
• ITU-T L.313/L.66-2007 Optical fibre cable maintenance criteria for in-service fibre testing in access networks
• ITU-T G Suppl. 40-2006 Optical fibre and cable Recommendations and standards guideline
• ITU-T G Suppl. 40-2018 Optical fibre and cable Recommendations and standards guideline
• ITU-T L.310/L.53-2003 Optical fibre maintenance criteria for access networks
• ITU-T G Suppl. 40-2024 Optical fibre and cable Recommendations and standards guideline
• SERIE G SUPP 40 SPANISH-2006 Directriz sobre Recomendaciones y normas para cables y fibras ópticas
• ITU-T L.66-2007 Optical fibre cable maintenance criteria for in-service fibre testing in access networks (Study Group 6)

German Institute for Standardization

• DIN 58141-4:2009-06 Testing of fibre optic elements - Part 4: Determination of diameters and thicknesses of optical fibres
• DIN 58141-4 E:2013-10 Measurement of fiber optic elements - Part 4: Determination of diameters and thicknesses of optical fibers
• DIN 58141-4:2014-08 Measurement of fiber optic elements - Part 4: Determination of diameters and thicknesses of optical fibers; Text in German and English
• DIN 58141-4:2009 Testing of fibre optic elements - Part 4: Determination of diameters and thicknesses of optical fibres
• DIN 58141-4:1990 Testing of fibre optic elements; determination of diameters and thicknesses of optical fibres
• DIN 58141-4 E:2013 Draft Document - Measurement of fiber optic elements - Part 4: Determination of diameters and thicknesses of optical fibers; Text in German and English
• DIN EN IEC 61315:2020-07 Calibration of fibre-optic power meters (IEC 61315:2019); German version EN IEC 61315:2019 / Note: DIN EN 61315 (2006-09) remains valid alongside this standard until 2022-05-03.
• DIN 58141-4:2014 Measurement of fiber optic elements - Part 4: Determination of diameters and thicknesses of optical fibers; Text in German and English
• DIN EN 61755-3-1:2009-08 Fibre optic connector optical interfaces - Part 3-1: Optical interface, 2,5 mm and 1,25 mm diameter cylindrical full zirconia PC ferrule, single mode fibre (IEC 61755-3-1:2006, modified + Corrigendum 2009); German version EN 61755-3-1:2009 / Note: To b...
• DIN EN 4641-202:2018-07 Draft Document - Aerospace series - Cables, optical, 125 µm diameter cladding - Part 202: Semi-loose structure 9/125 µm SM fibre nominal 2.74 mm outside diameter - Product standard; German and English version FprEN 4641-202:2018
• DIN EN 4641-201:2018-07 Draft Document - Aerospace series - Cables, optical, 125 µm diameter cladding - Part 201: Semi-loose structure 9/125 µm SM fiber nominal 1.8 mm outside diameter - Product standard; German and English version FprEN 4641-201:2018
• DIN EN 3745-507:2003-05 Aerospace series - Fibres and cables, optical, aircraft use; Test methods - Part 507: Cut-through; German and English version EN 3745-507:2002
• DIN EN 4641-106:2018-06 Draft Document - Aerospace series - Cables, optical, 125 µm diameter cladding - Part 106: Semi-loose structure 62.5/125 µm GI fibre nominal 0.9 mm outside diameter - Product standard; German and English version FprEN 4641-106:2018
• DIN EN 4641-200:2018-07 Draft Document - Aerospace series - Cables, optical, 125 µm diameter cladding - Part 200: Semi-loose structure 9/125 µm GI fibre nominal 0.9 mm outside diameter - Product standard; German and English version FprEN 4641-200:2018

American National Standards Institute （ANSI)

• ANSI/TIA/EIA 455-48B-1990 Measurement of Optical Fiber Cladding Diameter Using Laser-Based Instruments
• ANSI/UL 1651-2008 Standard for Optical Fiber Cable
• ANSI/TIA-455-191-B-2003 Measurement of Mode Field Diameter of Single-Mode Optical Fiber
• ANSI/TIA-455-48B-1990 Measurement of Optical Fiber Cladding Diameter Using Laser-Based Instruments
• ANSI/EIA/TIA 455-48B:1990 Measurement of Optical Fiber Cladding Diameter Using Laser-Based Instruments
• ANSI/TIA-492AAAB-A-2009 Detail Specification for 50-�� Core Diameter/125-�� Cladding Diameter Class Ia Graded-Index Multimode Optical Fibers
• ANSI/TIA-492AAAA-B-2009 Detail Specification for 62.5-�� Core Diameter/125-�� Cladding Diameter Class Ia Graded-Index Multimode Optical Fibers
• ANSI/TIA-492AAAC-B-2009 Detail Specification for 850-nm Laser- Optimized@ 50-�� Core Diameter/125-�� Cladding Diameter Class Ia Graded-Index Multimode Optical Fibers
• ANSI/TIA/EIA 455-58B-2001 Core Diameter Measurement of Graded-Index Optical Fibers
• ANSI/TIA-492AAAC-B-2008(2009) Detail Specification for 850-nm Laser- Optimized, 50-µm Core Diameter/125-µm Cladding Diameter Class Ia Graded-Index Multimode Optical Fibers
• ANSI/UL 1666-2007 Standard for Test for Flame Propagation Height of Electrical and Optical-Fiber Cables Installed Vertically in Shafts
• ANSI/TIA-472F000-2005 Standard for Optical Fiber Drop Cable
• ANSI/TIA/EIA 604-6-1999 Fiber Optic Connector Intermateability Standard (Fiber Jack Connector)
• ANSI/TIA/EIA-568-B.3-2000 Optical Fiber Cabling Components Standard
• ANSI/IEEE 1682:2011 Trial-Use Standard for Qualifying Fiber Optic Cables, Connections and Optical Fiber Splices for Use in
• ANSI/TIA-568-C.3-1-2011 Optical Fiber Cabling Components Standard - Addendum 1: Addition of OM4 Cables Optical Fiber and 24-fiber array connectors
• ANSI/TIA-568.3-D-2016 Optical Fiber Cabling and Components Standard
• ANSI/NECA/FOA 301-2010 Standard for Installing and Testing Fiber Optic Cables
• ANSI/IEEE 1591.3:2011 Standard for Qualifying Hardware for Helically-Applied Fiber Optic Cable Systems (WRAP Cable)

British Standards Institution (BSI)

• BS EN IEC 63267-1:2023 Fibre optic interconnecting devices and passive components. fibre optic connector optical interfaces Enhanced macro bend loss multimode 50 ?m core diameter fibres. General and guidance (British Standard)
• BS EN 62149-7:2012 Fibre optic active components and devices. Performance standards. 1310 nm discrete vertical cavity surface emitting laser devices
• BS EN 4641-301:2022 Aerospace series. Cables, optical 125 μm diameter cladding. Tight structure 50/125 μm GI, fibre nominal 1,8 mm, outside diameter. Product standard
• BS EN 61755-3-2:2010 Fibre optic connector optical interfaces. Optical interface, 2, 5 mm and 1,25 mm diameter cylindrical full zirconia ferrules for 8 degrees angled-PC single mode fibres
• BS EN 61755-3-2:2009 Fibre optic connector optical interfaces - Optical interface, 2, 5 mm and 1,25 mm diameter cylindrical full zirconia ferrules for 8 degrees angled-PC single mode fibres
• BS EN 62149-2:2014 Fibre optic active components and devices. Performance standards. 850 nm discrete vertical cavity surface emitting laser devices
• BS EN 62149-2:2009 Fibre optic active components and devices - Performance standards - 850 nm discrete vertical cavity surface emitting laser devices
• BS EN 62149-2:2010 Fibre optic active components and devices. Performance standards. 850 nm discrete vertical cavity surface emitting laser devices
• BS EN 60793-1-45:2003 Optical fibres - Part 1-45:Measurement methods and test procedures - Mode field diameter
• BS EN 61315:1997 Calibration of fibre optic power meters
• BS EN IEC 60793-1-45:2024 Optical fibres - Measurement methods and test procedures. Mode field diameter
• BS EN 60793-1-45:2004 Optical fibres - Measurement methods and test procedures - Mode field diameter
• BS EN IEC 61315:2019 Calibration of fibre-optic power meters
• BS PD IEC PAS 63503-3-30:2023 Fibre optic interconnecting devices and passive components. Connector optical interfaces for multi-core fibre-Connector parameters of standard outer diameter 4-core physically contacting fibres. Non-angled 2,5 mm and 1,25 mm diameter cylindrical full z...
• BS EN IEC 60793-1-45:2018 Optical fibres. Measurement methods and test procedures. Mode field diameter

Association for Electrical, Electronic & Information Technologies (VDE)

• VDE 0888-13 E*DIN IEC 60794-3-12:2008-03 Optical fibre cables - Part 3-12: Outdoor optical fibre cables – Product specification for duct and directly buried optical telecommunication cables
• VDE 0472-213-1992*DIN VDE 0472-213:1992 Testing of cables, wires and flexible cords; Field diameter of single-mode fibres

Swedish Institute for Standards

• SS-EN 4641-201:2018 Aerospace series - Cables, optical, 125 µm diameter cladding - Part 201: Semi-loose structure 9/125 µm SM fibre nominal 1,8 mm outside diameter - Product standard
• SS-EN 4641-100:2015 Aerospace series - Cables, optical 125 µm diameter cladding - Part 100: Tight structure 62,5/125 µm core GI fibre 1,8 mm outside diameter - Product standard
• SS-EN 4641-101:2015 Aerospace series - Cables, optical 125 µm diameter cladding - Part 101: Tight structure 62,5 µm core GI fibre 0,9 mm outside diameter - Product standard
• SS-EN 62149-2:2014 Fibre optic active components and devices - Performance standard - Part 2: 850 nm discrete vertical cavity surface emitting laser devices
• SS-EN 62149-7:2013 Fibre optic active components and devices - Performance standards - Part 7: 1 310 nm discrete vertical cavity surface emitting laser devices
• SS-EN 4641-105:2010 Aerospace series - Cables, optical 125 µm diameter cladding - Part 105: Semi-loose, ruggedized quadraxial construction 62,5/125 µm GI fibre nominal, 5,72 mm outside diameter - Product standard
• SS-EN IEC 61315:2019 Calibration of fibre-optic power meters
• IEC/PAS 63503-3-30:2023 Fibre optic interconnecting devices and passive components ? Connector optical interfaces for multi-core fibre ? Part 3-30: Connector parameters of standard outer diameter 4-core physically contacting fibres - non-angled 2,5 mm and 1,25 mm diameter cyl...

Association Francaise de Normalisation

• NF C93-919-3-1*NF EN 61755-3-1:2009 Fibre optic connector optical interfaces - Part 3-1 : optical interface, 2,5 mm and 1,25 mm diameter cylindrical full zirconia PC ferrule, single mode fibre
• NF EN 187105:2002 Single-mode fiber optic cables (duct/directly buried installations)
• NF C93-803*NF EN 61315:2006 Calibration of fibre-optic power meters
• NF C93-884-7*NF EN 62149-7:2012 Fibre optic active components and devices - Performance standards - Part 7 : 1 310 nm discrete vertical cavity surface emitting laser devices
• NF EN 62149-2:2015 Active fiber optic components and devices - Performance standard - Part 2: individual 850 nm vertical cavity surface-emitting laser devices
• NF C93-803:1997 Calibration of fibre optic power meters.
• NF EN 61755-3-1:2009 Optical interfaces of connectors for optical fibers - Part 3-1: optical interfaces, cylindrical solid zirconia PC ferrules with diameters of 2.5 mm and 1.25 mm, single-mode fibers
• NF C93-919-3-2*NF EN 61755-3-2:2009 Fibre optic connector optical interfaces - Part 3-2 : optical interface, 2,5 mm and 1,25 mm diameter cylindrical full zirconia ferrules for 8 degrees angled-PC single mode fibres
• NF EN 61755-3-5:2007 Optical interfaces of connectors for optical fibers - Part 3-5: optical interfaces - Cylindrical composite PC ferrules with diameters of 2.5 mm and 1.25 mm, using Cu-Ni alloy as material surrounding the fiber, single-mode fibers
• NF L52-410-102*NF EN 4641-102:2025 Aerospace series - Cables, optical 125 μm diameter cladding - Part 102 : semi-loose 62,5 μm/125 μm GI fibre nominal 1,8 mm outside diameter - Product standard
• NF EN IEC 60793-1-45:2018 Optical fibers - Part 1-45: measurement methods - Mode field diameter measurement
• NF C93-884-2*NF EN 62149-2:2015 Fibre optic active components and devices - Performance standard - Part 2 : 850 nm discrete vertical cavity surface emitting laser devices

Japanese Industrial Standards Committee (JISC)

• JIS C 5965-2-2:2011 Fiber optic connector optical interfaces -- Part 2-2: Optical interface standard single mode angled physically contacting fibers
• JIS C 6820:2005 General rules of optical fibers
• JIS C 5965-3-2:2011 Fiber optic connector optical interfaces -- Part 3-2: Optical interface, 2.5 mm and 1.25 mm diameter cylindrical full zirconia ferrules for 8 degrees angled-PC single mode fibers
• JIS C 5965-3-1:2011 Fiber optic connector optical interfaces -- Part 3-1: Optical interface, 2.5 mm and 1.25 mm diameter cylindrical full zirconia PC ferrule, single mode fiber
• JIS C 6186:2020 Calibration of fiber optic power meters

Asociación Española de Normalización (AENOR)

• AENOR UNE-EN 61755-3-7:2009 Fibre optic connector optical interfaces -- Part 3-7: Optical Interface, 2,5 mm and 1,25 mm diameter cylindrical PC composite ferrule using Titanium as fibre surrounding material, single mode fibre (Endorsed by AENOR in June of 2009.)
• AENOR UNE-EN 4532:2009 Aerospace series - Cables, optical, single core 200 µm/280 µm fibre, 2.5 mm outer jacket - Technical specification (Endorsed by AENOR in March 2009.)
• AENOR UNE-EN IEC 60794-4-30:2021 Optical fibre cables - Part 4-30: Aerial optical cables along electrical power lines - Family specification for optical phase conductor (OPPC) optical cables (Endorsed by Asociación Española de Normalización in July 2021.)

Finnish Standards Institute

• SFS-EN 4641-201:2018 Aerospace series. Cables, optical, 125 µm diameter cladding. Part 201: Semi-loose structure 9/125 µm SM fibre nominal 1,8 mm outside diameter. Product standard
• SFS-EN 4641-301:2024 Aerospace series. Cables, optical, 125 µm diameter cladding. Part 301: Tight structure 50/125 µm GI, fibre nominal 1,8 mm, outside diameter. Product standard
• SFS-EN IEC 61315:2019 Calibration of fibre-optic power meters
• SFS-EN IEC 60794-3-12:2021 Optical fibre cables - Part 3-12: Outdoor cables - Detailed specification for duct and directly buried optical telecommunication cables for use in premises cabling

European Committee for Electrotechnical Standardization（CENELEC）

• EN 61315:1997 Calibration of Fibre Optic Power Meters
• EN IEC 61315:2019 Calibration of fibre-optic power meters
• EN 61755-3-7:2009 Fibre optic interconnecting devices and passive components - Fibre optic connector optical interfaces - Part 3-7: Optical interface, 2,5 mm and 1,25 mm diameter cylindrical PC composite ferrule using titanium as fibre surrounding material, single mode fib

Institute of Electrical and Electronics Engineers (IEEE)

• IEEE P2067/D3, October 2020 IEEE Approved Draft Standard for Fiber Optic Sensors - Fiber Bragg Grating Interrogator Standard - Terminology and Definitions
• IEEE P2067/D2, April 2020 IEEE Draft Standard for Fiber Optic Sensors - Fiber Bragg Grating Interrogator Standard - Terminology and Definitions
• IEEE 2067-2021 Fiber Optic Sensors—Fiber Bragg Grating Interrogator Standard—Terminology and Definitions

International Electrotechnical Commission (IEC)

• IEC 62149-7:2012 Fibre optic active components and devices - Performance standards - Part 7: 1310 nm discrete vertical cavity surface emitting laser devices
• IEC 61315:2019 Calibration of fibre-optic power meters
• IEC TS 62661-2-1:2013 Optical backplanes - Product specification - Part 2-1: Optical backplane using optical fibre circuit boards and multicore right angle optical connectors
• IEC 61315:2019 RLV Calibration of fibre-optic power meters
• IEC 86/439/DTS:2012 IEC/TS 62661-2-1, Ed. 1: Optical backplanes - Product specification - Part 2-1: Optical backplane using optical fibre circuit boards and multicore right angle optical connectors
• IEC PAS 63503-3-30:2023 Fibre optic interconnecting devices and passive components - Connector optical interfaces for multi-core fibre - Part 3-30: Connector parameters of standard outer diameter 4-core physically contacting fibres - Non-angled 2,5 mm and 1,25 mm diameter cyl...
• IEC 63267-3-61:2025 Fibre optic interconnecting devices and passive components - Fibre optic connector optical interfaces for enhanced macrobend multimode fibres - Part 3-61: Connector parameters of physically contacting 50 μm core diameter fibres - Non-angled 2,5 mm and 1,2
• IEC 63267-3-61:2025 PRV Fibre optic interconnecting devices and passive components - Fibre optic connector optical interfaces for enhanced macrobend multimode fibres - Part 3-61: Connector parameters of physically contacting 50 μm core diameter fibres - Non-angled 2,5 mm and 1,2
• IEC 61315:2005 Calibration of fibre optic power meters

GCC Standardization Organization

• GSO IEC 61315:2015 Calibration of fibre-optic power meters

Underwriters Laboratories (UL)

• UL 1651:2023-04 STANDARD FOR SAFETY Optical Fiber Cable
• UL 1666-1999 Standard for Test for Flame Propagation Height of Electrical and Optical-Fiber Cables Installed Vertically in Shafts
• UL 1651 BULLETIN-2023 UL Standard for Safety Optical Fiber Cable

Danish Standards Foundation

• DANSK DS/EN IEC 61315:2019 Calibration of fibre-optic power meters
• DANSK DS/EN 61315:2006 Calibration of fibre-optic power meters
• DS/EN 61315:2006 Calibration of fibre-optic power meters
• DANSK DS/EN 62149-2:2014 Fibre optic active components and devices - Performance standards - Part 2: 850 nm discrete vertical cavity surface emitting laser devices
• DS/EN IEC 62148-15:2021 Fibre optic active components and devices – Package and interface standards – Part 15: Discrete vertical cavity surface emitting laser packages
• DS/EN 62148-15:2010 Fibre optic active components and devices - Package and interface standards - Part 15: Discrete vertical cavity surface emitting laser packages
• DS/EN 62149-2:2009 Fibre optic active components and devices - Performance standards - Part 2: 850 nm discrete vertical cavity surface emitting laser devices

Bureau of Indian Standards

• IS 14976-2012 Calibration of Fibre Optic Power Meters

The Directorate General of Specifications and Metrology (DGSM)

• OS GSO IEC 61315:2015 Calibration of fibre-optic power meters
• OS GSO IEC 62149-2:2013 Fibre optic active components and devices - Performance standards - Part 2: 850 nm discrete vertical cavity surface emitting laser devices
• OS GSO IEC 61755-3-1:2014 Fibre optic connector optical interfaces - Part 3-1: Optical interface, 2,5 mm and 1,25 mm diameter cylindrical full zirconia PC ferrule, single mode fibre

Comitato Elettrotecnico Italiano

• CEI EN 61315:2007 Calibration of fibre-optic power meters
• CEI EN IEC 61315:2019 Calibration of fibre-optic power meters
• CEI EN 62149-2:2015 Fibre optic active components and devices - Performance standards Part 2: 850 nm discrete vertical cavity surface emitting laser devices

Korean Agency for Technology and Standards (KATS)

• KS C IEC 61315:2020 Calibration of fiber-optic power meters
• KS C IEC 61315-2020 Calibration of fiber-optic power meters
• KS C IEC 61315:2014 Calibration of fiber-optic power meters
• KS C IEC 61315-2020(2025) Calibration of fiber-optic power meters
• KS C IEC 61315-2025 Calibration of fiber-optic power meters
• KS C IEC 61315:2009 Calibration of fiber-optic power meters

International Committee for Information Technology Standards (INCITS)

• INCITS TR-19-1998 Fibre Channel - Private Loop SCSI Direct Attach (FC-PLDA)

Canadian Standards Association (CSA)

• CSA T568.3-2005(R2010) Optical Fiber Cabling Components Standard
• CSA C22.2 No.291-2024 Naked fiber optic connector and buffered fiber optic connector (UL 486F dual national standard)

Spanish Association for Standardization (UNE)

• UNE-EN IEC 61315:2019 Calibration of fibre-optic power meters (Endorsed by Asociación Española de Normalización in July of 2019.)
• UNE-EN 62149-2:2014 Fibre optic active components and devices - Performance standards - Part 2: 850 nm discrete vertical cavity surface emitting laser devices (Endorsed by AENOR in October of 2014.)
• UNE-EN 62149-7:2012 Fibre optic active components and devices - Performance standards - Part 7: 1 310 nm discrete vertical cavity surface emitting laser devices (Endorsed by AENOR in July of 2012.)
• UNE-EN 61755-3-5:2006 Fibre optic connector optical interfaces -- Part 3-5: Optical Interface - 2,5 mm and 1,25 mm diameter cylindrical PC composite ferrule using Cu-Ni-alloy as fibre surrounding material, single mode fibre (IEC 61775-3-5:2006). (Endorsed by AENOR in April ...

Ente Nazionale Italiano di Unificazione

• UNI EN 4641-102:2025 Aerospace series - Cables, optical 125 μm diameter cladding - Part 102: Semi-loose 62,5 µm/125 µm GI fibre nominal 1,8 mm outside diameter - Product standard

South African Bureau of Standard

• SANS 61315:2006 Calibration of fibre-optic power meters

European Committee for Standardization (CEN)

• EN 4641-301:2011 Aerospace series - Cables, optical 125 μm diameter cladding - Part 301: Tight structure 50/125 μm GI fibre nominal 1,8 mm outside diameter - Product standard
• EN 4641-101:2015 Aerospace series - Cables@ optical 125 �� diameter cladding - Part 101: Tight structure 62@5 �� core GI fibre 0@9 mm outside diameter - Product standard

Kingdom of Bahrain Testing and Metrology Directorate

• BH GSO IEC 61315:2016 Calibration of fibre-optic power meters
• BH GSO IEC 62149-2:2016 Fibre optic active components and devices - Performance standards - Part 2: 850 nm discrete vertical cavity surface emitting laser devices

International Organization for Standardization (ISO)

• ISO/IEC 14165-521:2009 Information technology - Fibre channel - Part 521: Fabric application interface standard (FAIS)

Others: collimated fiber,collimated fiber,Fiber Collimation,Fiber Collimation,Collimator,collimation,UV fiber collimation,laser alignment,collimation design,Collimator,optical collimation,Fiber Collimator,Sample alignment,Sample alignment,collimation,laser alignment,Collimator,How to align the collimator,UV fiber collimation