Peak Area Percentage

Peak Area Percentage, Total:154 items.

The international standard classification for "Peak Area Percentage" includes: Mineral and metal fibres , Auxiliary materials and additives for plastics , Rubber compounding ingredients , Cement. Gypsum. Lime. Mortar , Cylinders .

The Chinese standard classification for "Peak Area Percentage" includes: Building material raw material ore , Carbon black , Cement , Hydraulic and pneumatic device .

未注明发布机构

FORD FLTM BP 010-01-2001 DETERMINATION OF PERCENT VOLUME CHANGE IN BUNA"N" RUBBER AFTER OIL IMMERSION
FORD FLTM BP 010-1-2001 DETERMINATION OF PERCENT VOLUME CHANGE IN BUNA "N" RUBBER AFTER OIL IMMERSION

Professional Standard - Chemical Industry

HG/T 6138-2023 Specific surface area and pore size analyzer

Group Standards of the People's Republic of China

T/YNIA 021-2023 Measurement for specific surface area and pore volume of MOFs materials —— Static volumetric method
T/ZSA 110-2022 Specific surface area and pore size analyzer
T/QGCML 2979-2024 Highly dispersed and large specific surface area zinc oxide

Professional Standard - Hydroelectric Power

SD 174-1985 Slope-area method determination specification

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 207-1963 Method of determination for specific surface of cement
GB/T 6646.4 COR-1986 Method for specific surface area of chrysotile asbestos COR
GB/T 3780.5-2008 Carbon black - Part 5：Determination of specific surface area-CTAB test method
GB/T 8074-2008(英文版) Testing method for specific surface of cement—Blaine method
GB/T 8074-2008 Testing method for specific surface of cement—Blaine method
GB/T 3780.5-2017 Carbon black-Part 5:Determination of specific surface area-CTAB test method
GB/T 8074-1987 Testing method for specific surface of cement; Blaine method
GB/T 3780.5-2002 Carbon black used in rubber products--Determiantion of specific surface area--CTAB test method
GB/T 6646.4-1986 Method for specific surface area of chrysotile asbestos

Professional Standard - Machinery

JB/T 7939-1999 Hydraulic fluid power. Cylinders. Bore and rod area ratios
JB/T 7939-2010 Hydraulic fluid power-Bore and rod area ratios

National Metrological Verification Regulations of the People's Republic of China

JJG(建材) 107-1999 Verification regulation for determination specific surface area of air permeability apparatus

Professional Standard - Energy

NB/SH/T 0571-2021 Standard test method for determining microspore volume and zeolite area of a catalyst

American Society for Testing and Materials (ASTM)

ASTM E2109-01(2014) Standard Test Methods for Determining Area Percentage Porosity in Thermal Sprayed Coatings
ASTM E210-63(2016) Standard Specification for Microscope Objective Thread
ASTM E2109-01(2021) Standard Test Methods for Determining Area Percentage Porosity in Thermal Sprayed Coatings
ASTM D2799-99 Standard Test Method for Microscopical Determination of Volume Percent of Physical Components of Coal
ASTM D2799-09 Standard Test Method for Microscopical Determination of the Maceral Composition of Coal
ASTM D5061-92(1997) Standard Test Method for Microscopical Determination of Volume Percent of Textural Components in Metallurgical Coke
ASTM D7214-07 Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
ASTM D7214-07a(2012) Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
ASTM D7214-07a Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
ASTM UOP964-98 Surface Area, Pore Volume, Average Pore Diameter and Pore Diameter Distribution of Porous Materials
ASTM D7214-06 Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
ASTM D6093-97 Standard Test Method for Percent Volume Nonvolatile Matter in Clear or Pigmented Coatings Using a Helium Gas Pycnometer
ASTM D6093-97(2003) Standard Test Method for Percent Volume Nonvolatile Matter in Clear or Pigmented Coatings Using a Helium Gas Pycnometer
ASTM D6093-97(2011) Standard Test Method for Percent Volume Nonvolatile Matter in Clear or Pigmented Coatings Using a Helium Gas Pycnometer
ASTM D6093-97(2022) Standard Test Method for Percent Volume Nonvolatile Matter in Clear or Pigmented Coatings Using a Helium Gas Pycnometer
ASTM D5061-92(2004) Standard Test Method for Microscopical Determination of Volume Percent of Textural Components in Metallurgical Coke
ASTM E1945-02 Standard Test Method for Percent Dispersibility
ASTM A659/A659M-22 Standard Specification for Commercial Steel (CS), Sheet and Strip, Carbon (0.16 Maximum to 0.25 Maximum Percent), Hot-Rolled
ASTM E1945-98 Standard Test Method for Percent Dispersibility
ASTM E1945-21 Standard Test Method for Percent Dispersibility

Portuguese Institute of Quality

NP EN 772-2-2001 Methods of test for masonry units Part 2:Determination of percentage area of voids in aggregate concrete masonry units(by paper indentation)
E 209-1967 water. Determine the percentage of water in the total sulfide content (measurement volume)

Ente Nazionale Italiano di Unificazione

UNI EN 772-2:2007 Methods of test for masonry units - Part 2: Determination of percentage area of voids in masonry units (by paper indentation)
UNI EN ISO 4590:2016 Rigid cellular plastics - Determination of the volume percentage of open cells and of closed cells
UNI EN ISO 4590:2005 Rigid cellular plastics - Determination of the volume percentage of open cells and of closed cells
UNI EN 772-2:2001 Methods of test for masonry units - Determination of percentage area of voids in aggregate concrete masonry units (by paper indentation).
UNI 4180:1970 Measuring instruments. Dial gauges reading in 0,01 mm.
UNI EN 772-9:2001 Methods of test for masonry units - Determination of volume and percentage of voids and net volume of calcium silicate masonry units by sand filling.
UNI EN ISO 4590:1997 Cellular plastics. Determination of volume percentage of open and closed cells of rigid materials.
UNI EN 14975:2010 Loft ladders - Requirements, marking and testing

Bureau of Indian Standards

IS 18061-2023 Selection Of Aperture Size Percentage Open Area And Wire Diameter Combination For Industrial Screens - Guidelines
IS 11239 Pt.5-1985 Test methods for rigid porous thermal insulation materials Part 5 Volume percentage of open and closed cells
IS 11146-1984 Recommendations for Hydraulic Cylinder Bore Diameter and Rod Area Ratio
IS 11239-5-2019 Method of Test for Rigid Cellular Thermal Insulation Materials Part 5 Volume Percent of Open and Closed Cells ( Second Revision )

German Institute for Standardization

DIN 53219:2009-08 Paints and varnishes - Determination of percentage volume of non-volatile matter
DIN 53219:2005 Paints and varnishes - Determination of percentage volume of non-volatile matter
DIN EN ISO 4590:2016-12 Rigid cellular plastics - Determination of the volume percentage of open cells and of closed cells (ISO 4590:2016); German version EN ISO 4590:2016
DIN EN 772-2:2005 Methods of test for masonry units - Part 2: Determination of percentage area of voids in masonry units (by paper indentation); German version EN 772-2:1998 + A1:2005
DIN 53219:2005-08 Paints and varnishes - Determination of percentage volume of non-volatile matter
DIN EN 772-2:1998 Methods of test for masonry units - Part 2: Determination of percentage area of voids in masonry units (by paper indentation)
DIN EN 772-2:2005-05 Methods of test for masonry units - Part 2: Determination of percentage area of voids in masonry units (by paper indentation); German version EN 772-2:1998 + A1:2005
DIN EN ISO 4590 E:2014 Draft Document - Rigid cellular plastics - Determination of the volume percentage of open cells and of closed cells (ISO/DIS 4590:2014); German version prEN ISO 4590:2014
DIN 66133:1993-06 Determination of pore volume distribution and specific surface area of solids by mercury intrusion
DIN 66133:1993 Determination of pore volume distribution and specific surface area of solids by mercury intrusion
DIN 5477:1983-02 Per cent, parts per thousand; concepts, use
DIN 19683-13:2007-07 Soil quality - Physical laboratory tests - Part 13: Determination of soil volume percentage, total pore volume and pore number of mineral soils
DIN 19683-14:2007-07 Soil quality - Physical laboratory tests - Part 14: Determination of soild volume percentage of bog soils
DIN 12803-2:1981-02 Laboratory glassware; alcoholometry; alcoholometers for the alcoholic strength by volume
DIN 53219:2009 Paints and varnishes - Determination of percentage volume of non-volatile matter - Method by determination of the practical dry-film density
DIN 277-2:2005-02 Areas and volumes of buildings - Part 2: Classification of net ground areas (utilization areas, technical operating areas and circulation areas)
DIN EN 772-9:2005-05 Methods of test for masonry units - Part 9: Determination of volume and percentage of voids and net volume of clay and calcium silicate masonry units by sand filling; German version EN 772-9:1998 + A1:2005
DIN 277-2:1981 Areas and volumes of buildings - Part 2: Classification of net ground areas (utilization areas, technical operating areas and circulation areas)

Association Francaise de Normalisation

NF EN ISO 4590:2016 Rigid cellular plastics - Determination of the volume percentage of open cells and closed cells
NF P12-102/A1*NF EN 772-2/A1:2005 Methods of test for masonry units - Part 2 : determination of percentage area of voids in masonry units (by paper indentation)
NF P12-102*NF EN 772-2:1999 Methods of test for masonry units - Part 2 : determination of percentage area of voids in aggregate concrete masonry units (by paper indentation)

The Directorate General of Specifications and Metrology (DGSM)

OS GSO ISO 4590:2013 Rigid cellular plastics - Determination of the volume percentage of open cells and of closed cells

GCC Standardization Organization

GSO EN 772-2:2024 Methods of test for masonry units - Part 2: Determination of percentage area of voids in aggregate concrete masonry units (by paper indentation)
GSO 543:1994 Carpets - determination of measured surface pile density and measured pile fiber volume ratio.
OS GSO EN 772-2:2024 Methods of test for masonry units - Part 2: Determination of percentage area of voids in aggregate concrete masonry units (by paper indentation)
GSO ISO 4590:2013 Rigid cellular plastics - Determination of the volume percentage of open cells and of closed cells
GSO ISO 1388-7:2002 Ethanol for industrial use metod of test : determination of methanol content between 0.01 and 0.20 % (v/v ) - photometric method .
GSO IEC 61788-11:2013 Superconductivity - Part 11: Residual resistance ratio measurement - Residual resistance ratio of Nb3Sn composite superconductors

International Organization for Standardization (ISO)

ISO 11461:2001 Soil quality - Determination of soil water content as a volume fraction using coring sleeves - Gravimetric method
ISO 23604:2022 Method of determining specific surface area of coal
ISO 1070:1992 Liquid flow measurement in open channels; slope-area method

British Standards Institution (BSI)

BS EN ISO 4590:2016 Rigid cellular plastics. Determination of the volume percentage of open cells and of closed cells
BS EN ISO 4590:1995 Cellular plastics. Determination of volume percentage of open and closed cells of rigid materials
BS EN 772-2:1998(2006) Methods of test for masonry units — Part 2 : Determination of percentage area of voids in masonry units (by paper indentation)
BS EN ISO 4590:2003 Rigid cellular plastics - Determination of the volume percentage of open cells and of closed cells
BS ISO 23604:2022 Method of determining specific surface area of coal
21/30425566 DC BS ISO 23604. Method of determining specific surface area of coal
BS EN 772-9:1998(2005) Methods of test for masonry units — Part 9 : Determination of volume and percentage of voids and net volume of clay and calcium silicate masonry units by sand filling

Korean Agency for Technology and Standards (KATS)

KS M ISO 4590-2023 Rigid cellular plastics — Determination of the volume percentage of open cells and of closed cells
KS M ISO 4590-2018(2023) Rigid cellular plastics — Determination of the volume percentage of open cells and of closed cells
KS I ISO 11461:2005 Soil quality－Determination of soil water content calculatedon a volume basis(Gravimetric method)
KS M ISO 4590-2018 Rigid cellular plastics — Determination of the volume percentage of open cells and of closed cells
KS M ISO 4590:2018 Rigid cellular plastics — Determination of the volume percentage of open cells and of closed cells
KS B ISO 1070:2003 Liquid flow measurement in open channels－Slope-area method
KS M ISO 3233-2016 Paints and varnishes－Determination of percentage volume of non-volatile matter by measuring the density of a dried coating
KS M ISO 3233-2002(2012) Paints and varnishes－Determination of percentage volume of non-volatile matter by measuring the density of a dried coating
KS B ISO 7181-2013 Hydraulic fluid power－Cylinders－Bore and rod area ratios

Spanish Association for Standardization (UNE)

UNE-EN ISO 4590:2017 Rigid cellular plastics - Determination of the volume percentage of open cells and of closed cells (ISO 4590:2016)
AENOR UNE 51001:1966 DETERMINATION OF SPECIFIC WEIGHT WITH AREOMETER
UNE-EN 772-2:1999/A1:2005 Methods of test for masonry units - Part 2: Determination of percentage area of voids in masonry units (by paper indentation)
AENOR UNE-EN ISO 4590:2017 Rigid cellular plastics - Determination of the volume percentage of open cells and of closed cells (ISO 4590:2016)
UNE-EN ISO 4590:2003 Rigid cellular plastics - Determination of the volume percentage of open cells and of closed cells (ISO 4590:2002)
UNE-EN 772-2:1999 METHODS OF TEST FOR MASONRY UNITS - PART 2: DETERMINATION OF PERCENTAGE AREA OF VOIDS IN AGGREGATE CONCRETE MASONRY UNITS (BY PAPER INDENTATION).
AENOR UNE-EN 772-2:1999 METHODS OF TEST FOR MASONRY UNITS - PART 2: DETERMINATION OF PERCENTAGE AREA OF VOIDS IN AGGREGATE CONCRETE MASONRY UNITS (BY PAPER INDENTATION).
UNE-EN 772-9:1999 Methods of test for masonry units - Part 9: Determination of volume and percentage of voids and net volume of clay and calcium silicate masonry units by sand filling
UNE 21-136 Pt.13-1990 Relay. Percent difference relay
UNE-EN 772-9:1999/A1:2008 Methods of test for masonry units - Part 9: Determination of volume and percentage of voids and net volume of clay and calcium silicate masonry units by sand filling

Danish Standards Foundation

DS/EN ISO 4590:2003 Rigid cellular plastics - Determination of thevolume percentage of open cells and of closed cells
DANSK DS/EN 772-2:1998 Methods of test for masonry units - Part 2: Determination of percentage area of voids in aggregate concrete masonry units (by paper indentation)
DANSK DS/EN ISO 4590:2016 Rigid cellular plastics – Determination of the volume percentage of open cells and of closed cells (ISO 4590:2016)
DS/EN 772-2/A1:2006 Methods of test for masonry units - Part 2: Determination of percentage area of voids in masonry units (by paper indentation)
DS/EN 772-2:1999 Methods of test for masonry units - Part 2: Determination of percentage area of voids in aggregate concrete masonry units (by paper indentation)

Standards Norway

NS-EN 772-2:1998 Methods of test for masonry units - Part 2: Determination of percentage area of voids in aggregate concrete masonry units (by paper indentation)
NS-EN ISO 4590:2016 Rigid cellular plastics — Determination of the volume percentage of open cells and of closed cells (ISO 4590:2016)
NS-EN ISO 4590:1995 Cellular plastics — Determination of volume percentage of open and closed cells of rigid materials (ISO 4590:1981)

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO EN 772-2:2024 Methods of test for masonry units - Part 2: Determination of percentage area of voids in aggregate concrete masonry units (by paper indentation)

South African Bureau of Standard

SANS 5748:2010 Specific surface of cement
SANS 5748:2006 Specific surface of cement

Austrian Standards

ONORM A 6405-1998 Percent, per thousand, parts per million, point, percentage point

Yugoslav Association for Standardization

JUS H.E8.050-1991 Surface active agents. Determination of wetting power by immersion

Czech Standards Institute (UNMZ)

CSN 72 2114-1970 Determination of specific surface of cement
CSN 44 1818-1987 Iron ore concentrates, Method of determination of specific surface

European Committee for Standardization (CEN)

EN ISO 11461:2014 Soil quality - Determination of soil water content as a volume fraction using coring sleeves - Gravimetric method
EN ISO 4590:2016 Rigid cellular plastics - Determination of the volume percentage of open cells and of closed cells
EN 772-2:1998 Methods of — Test for masonry units — Part 2: Determination of percentage area of voids in masonry units (by paper indentation) Incorporates Amendment A1: 2005

Lithuanian Standards Office

LST EN ISO 4590:2004 Rigid cellular plastics - Determination of the volume percentage of open cells and of closed cells (ISO 4590:2002)
LST EN 772-2-2000/A1-2005 Methods of test for masonry units - Part 2: Determination of percentage area of voids in masonry units (by paper indentation)
LST EN 772-2-2000 Methods of test for masonry units - Part 2: Determination of percentage area of voids in aggregate concrete masonry units (by paper indentation)

Swedish Institute for Standards

SS-EN 772-2:1999 Methods of test for masonry units - Part 2: Determination of percentage area of voids in aggregate concrete masonry units (by paper identation)

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE)

ASHRAE NY-08-058-2008 Validation of Solar/Optical Models for Louvered Shades Using a Broad Area Illumination Integrating Sphere

Cuban Institute of Standards and Metrology

NC 54-279-1984 Construction Materials and Producis. Calcium Oxide and Calcium Hydrale Volumetric Determination of their Useful Percentage

Chile Instituto Nacional de Normalización

INDITECNOR 23-68ch-1958 Grease Substances: Measurement of Rubber Percent and Mucus Percent
INDITECNOR 23-55ch-1956 Greasy objects: measurement of moisture percentage and volatile matter percentage

U.S. Air Force

AIR FORCE MIL-I-27202 A (1)-1983 INDICATOR, ELECTRICAL TACHOMETER, 0-110 PERCENT RPM, INTEGRALLY LIGHTED
AIR FORCE MIL-I-27202 A-1980 INDICATOR, ELECTRICAL TACHOMETER, 0-110 PERCENT RPM, INTEGRALLY LIGHTED
AIR FORCE MIL-I-27202 A NOTICE 1-1996 INDICATOR, ELECTRICAL TACHOMETER, 0-110 PERCENT RPM, INTEGRALLY LIGHTED
AIR FORCE MIL-I-25863 D NOTICE 1-1996 INDICATOR, ELECTRICAL TACHOMETER 0-110 PERCENT RPM, 2 INCH SIZE, INTEGRALLY LIGHTED
AIR FORCE MIL-I-25863 D-1990 INDICATOR, ELECTRICAL TACHOMETER 0-110 PERCENT RPM, 2 INCH SIZE, INTEGRALLY LIGHTED
AIR FORCE MS28023 REV A VALID NOTICE 2-1991 INDICATOR-POSITION, WING FLAPS, PERCENT MARKINGS

Gosstandart of Russia

GOST 10898.5-1984 Ion-exchange resins. Determination of specific surface
GOST 13144-1979 Graphite. Methods for the determination of specific surface

Institute of Interconnecting and Packaging Electronic Circuits (IPC)

IPC TM-650 2.4.22C-1999 Bow and Twist (Percentage)
IPC TM-650 2.3.17C-1994 Resin Flow Percent of Prepreg
IPC TM-650 2.3.17D-1997 Resin Flow Percent of Prepreg

Standard Association of Australia （SAA）

AS 2498.7:1981 Methods of testing rigid cellular plastics - Determination of volume percentage of open and closed cells

National Standardisation Body (ASRO)

STAS SR 13237-1994 Building physics. Heat engineering. Determination of volume percentage of open and closed cells of rigid materials.
STAS 4223/2-1970 CEMENT Determination of specific surface by means of the flowmeter

Society of Automotive Engineers (SAE)

SAE RS570-2 RS570 Percentage R.P.M. Tachometer Flange
SAE RS-570-2-1954 RS570 Percentage R.P.M. Tachometer Flange

Türk Standardları Enstitüsü

TS 3496-1980 DETERMINATION OF SPECIFIC SURFACE AREA OF POWDERED ORE SAMPLES

Others: Peak area,Peak area,Peak area,Relative percentage of peak area,Peak Area Percentage,Peak Area Percentage,Sample peak area Sample peak area,Peak area percent unit,Corrected Peak Area and Peak Area,peak area ratio peak area sum,peak area average peak area,relative peak area percentage,Peak area and relative peak area,Peak area,peak area,Peak area + peak,% of peak area,Peak Area Percentage Method