96-well plate samples

96-well plate samples, Total:77 items.

The international standard classification for "96-well plate samples" includes: Equipment for processing of minerals .

The Chinese standard classification for "96-well plate samples" includes: Cutting tools , Clamping fixtures , Papermaking in general , Sieving, Sieve Plate and Sieve Screen .

Professional Standard - Aerospace

QJ/Z 36-1978 Sample and proofreading sample (d=0.5~6.5)
QJ 981.1-1986 Die line template type marks and process holes

Professional Standard - Aviation

HB 741-1992 Template and Reference Template Used for Slot Milling Cutter of Expanding Drill of Four-tooth-set Type for Inspecting HB 734-92 Slot Milling Cutter
HB 986-1989 Bihole fork with two squeezers
HB 986-1974 Double-hole fork with two pressing parts
HB 4601-1992 Template and Reference Template for Expanding Drill Slot Milling Cutter for Machining Aluminum Alloy for Inspecting HB 4600-92 Slot Milling Cutter
HB 547-1989 Diplopore Fork with One Holding Piece
HB 547-1974 with one clamping piece double hole fork
HB 741-1979 Four-tooth sleeve type reaming drilling slot milling cutter sample and proofreading sample testing HB 734-92 slot milling cutter

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 12620-1990 Slots with round end and slots with square end plate screens
GB/T 10612-2003 Industrial plate screens - Thickness below 3 mm - Round and square holes
GB/T 22896-2008 Paper and board—Determination of curl—Single vertically suspended test piece
GB/T 12620-2008 Round and elongated apertures with round and square plate screens
GB/T 10613-2003 Industrial plate screens—Thickness of 3 mm and above—Round and square holes

Professional Standard - Railway

TB/T 2811.1-1997 No. 13 coupler frame pin hole length and frame body thickness factory repair inspection sample
TB/T 2812.1-1997 13th hook tail frame pin hole length and frame body thickness section repair inspection sample
TB/T 2604.6-1996 Inspection sample for length of pin hole of No. 13 coupler frame and inner rail of fixed lug

未注明发布机构

DIN 82024 E:2017-08 Round eye plates

Defense Logistics Agency

DLA MIL-DTL-5423/7 G-2009 BOOT, DUST AND WATER SEAL, TYPE B (FOR PUSHBUTTON SWITCHES), STYLE 2 (ONE ?HOLE MOUNTING, DRILLED PANEL), STYLE 2S (RFI-SHIELDED, ONE ?HOLE MOUNTING, DRILLED PANEL)
DLA MIL-DTL-3922/57 D-2013 FLANGES, WAVEGUIDE (COVER) (ROUND, 8 HOLE) (2 HOLES CENTERED HORIZONTALLY, 2 HOLES CENTERS VERTICALLY)
DLA MIL-DTL-3922/57 C-2008 FLANGES, WAVEGUIDE (COVER) (ROUND, 8 HOLE) (2 HOLES CENTERED HORIZONTALLY, 2 HOLES CENTERS VERTICALLY)
DLA MIL-DTL-55302/158 C VALID NOTICE 1-2009 Connectors, Printed Circuit Subassembly and Accessories; Receptacle Socket Contacts, 64 or 96 Contact Positions, for Printed Wiring Boards (.100 Inch Spacing)
DLA MS35254 REV C-2009 BRACE, CORNER, BOX 3 QUARTER-ROUND FLANGES, 3 MOUNTING HOLES

HU-MSZT

MSZ 6567-1960 Mobile template rear protection plate, double-sided, one template adjustment for parade 30.52mm
MSZ 6565-1960 Double sided, parade, cork adjusted one pattern 3-30mm
MSZ 6562-1960 Flow formwork application ring, one web formwork on check internal threaded holes 30, 100mm
MSZ KGST 357-1976 12 position hole card equipment

SCC

MIL MIL-DTL-5423/7E-2002 BOOT, DUST AND WATER SEAL, TYPE B (FOR PUSHBUTTON SWITCHES), STYLE 2 (ONE - HOLE MOUNTING, DRILLED PANEL), STYLE 2S (RFI-SHIELDED, ONE - HOLE MOUNTING, DRILLED PANEL) (SUPERSEDING MIL-B-5423/7D)
MIL MIL-DTL-3922/57C-2008 Flanges, Waveguide (Cover) (Round, 8 Hole) (2 Holes Centered Horizontally, 2 Holes Centers Vertically)
MIL MIL-DTL-3922/57D-2013 Flanges, Waveguide (Cover) (Round, 8 Hole) (2 Holes Centered Horizontally, 2 Holes Centers Vertically)
MIL MIL-B-5423/7D-1987 BOOT, DUST & WATER SEAL, TYPE B (FOR PUSHBUTTON SWITCHES) STYLE 2 (ONE HOLE MOUNTING, DRILLED PANEL) STYLE 2S RFI SHIELDED, ONE HOLE MOUNTING, DRILLED PANEL (SUPERSEDING MIL-B-5423/7C) (S/S BY MIL-DTL-5423/7E)
MIL MIL-DTL-3922/62D-2010 Flanges, Waveguide (Choke) (Round, 8 Hole (2 Holes Centered Horizontally, 2 Holes Centered Vertically))
MIL MIL-DTL-3922/62E-2019 Flanges, Waveguide (Choke) (Round, 8 Hole (2 Holes Centered Horizontally, 2 Holes Centered Vertically))
MIL MIL-C-55302/158A-1986 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, SOCKET CONTACTS, RIGHT ANGLE 64 OR 96 CONTACT POSITIONS, FOR PRINTED WIRING BOARDS (.100 INCH SPACING) (S/S BY MIL-C-55302/158B)
MIL MIL-F-3922/57B-1976 FLANGE, WAVEGUIDE (COVER) (ROUND, 8 HOLE (2 HOLES CENTERED HORIZONTALLY, 2 HOLES CENTERED VERTICALLY) (SUPERSEDING MIL-F-3922/57A)
MIL MIL-DTL-3922/62C-2000 FLANGES, WAVEGUIDE (CHOKE) (ROUND, 8 HOLE(2 HOLES CENTERED HORIZONTALLY, 2 HOLES CENTERED VERTICALLY)) (SUPERSEDING MIL-F-3922/62B)
AIA NA0040-0041 NUT, SELF-LOCKING, PLATE, TWO LUG, FIXED, LOW HEIGHT, C'BORED, 1100 MPa, METRIC, 235 °C, 425 °C

Korean Agency for Technology and Standards (KATS)

KS B ISO 3101:2003 Wheels and castors－Triangular top plates with three fixing holes
KS B ISO 2184-1:2003 Industrial castors－Dimensions of top－plates－Part 1：Oblong top-plates with 4 bolt holes
KS B 3505-1992 Counterbores for hexagon socket head bolts
KS B 3505-2002(2012) Counterbores for hexagon socket head bolts
KS B 3505-1982 Counterbores for hexagon socket head bolts
KS G 2626-2019 Steel sheet palettes for pupil

KR-KS

KS B ISO 3101-2003 Wheels and castors－Triangular top plates with three fixing holes
KS B ISO 2184-1-2003 Industrial castors－Dimensions of top－plates－Part 1：Oblong top-plates with 4 bolt holes

American Society of Mechanical Engineers (ASME)

ASME SEC II B SB-209-2001 Specification for Aluminum and Aluminum-Alloy Sheet and Plate ASTM B209-96
ASME B16.36-2006 Orifice Flanges
ASME B16.36-1996 Orifice flanges
ASME B16.36-2020 Orifice Flanges
ASME B16.36-1979 Orifice Flanges
ASME B16.36-1988 Orifice flanges

Danish Standards Foundation

DS/ISO 3101:1983 Wheelsand castors. Triangular top plates with three fixing holes

AASHTO - American Association of State Highway and Transportation Officials

T280-1998 Standard Method of Test for Concrete Pipe@ Manhole Sections@ or Tile (Nineteenth Edition; ASTM C497-96; ASTM C497M-96)
T 168-1996 Standard Specification for Sampling Bituminous Paving Mixtures (Eighteenth Edition; ASTM D979-96)
T 168-1997 Standard Specification for Sampling Bituminous Paving Mixtures (Nineteenth Edition; ASTM D979-96)

ECIA - Electronic Components Industry Association

EIA-364-96-2002 TP-96 Plated Through Hole Integrity Test Procedure for Electrical Connectors

Electronic Components, Assemblies and Materials Association

ECA SP3801-A-1-2002 Plated Through Hole Integrity Test Procedure for Electrical Connectors Comment Period Expires: April 6, 2002; ANSI/EIA-364-96,TP-96

International Organization for Standardization (ISO)

ISO 2184:1972 Industrial castors; Dimensions of top plates; Part I : Oblong top-plates with 4 bolt holes
ISO 3101:1981 Wheels and castors; Triangular top plates with three fixing holes
ISO 11556:2005 Paper and board - Determination of curl using a single vertically suspended test piece
ISO 11556:1998 Paper and board - Determination of curl using a single vertically suspended test piece

RU-GOST R

GOST 16669-1980 Liner plates for female dies with holders with four mounting holes. Construction and dimensions
GOST 16668-1980 Liner plates for punches with holders with four mounting holes. Construction and dimensions

Electronic Components, Assemblies and Materials Association

ECA EIA-364-96-2002 TP-96 Plated Through Hole Integrity Test Procedure for Electrical Connectors

German Institute for Standardization

DIN 7755-2:1961 Moulded rubber top-pieces for shoe heels; dimensions for nailhole patterns
DIN 82024:2018 Round eye plates

RO-ASRO

STAS 9852/4-1975 Industrial trucks TRIANGULAR TOP PLATES WITH THREE FIXING HOLES FOR CASTORS Dimensions

ESDU - Engineering Sciences Data Unit

ESDU 81039 B-1985 FLOW OF LIQUIDS Pressure losses across orifice plates@ perforated plates and thick orifice plates in ducts
ESDU 67023 A-1969 Geometric stress concentrations. Two equal unreinforced circular holes in infinite flat plates.
ESDU 81039 C-2007 Flow of liquids. Pressure losses across orifice plates@ perforated plates and thick orifice plates in ducts.
ESDU 75007-1975 Geometric stress concentration factors: two adjacent unreinforced circular holes in infinite flat plates.
ESDU 82009 C-1993 COMPRESSIBLE FLOW OF GASES Pressure losses across orifice plates@ perforated plates and thick orifice plates in ducts

British Standards Institution (BSI)

BS ISO 11556:2005 Paper and board - Determination of curl using a single vertically suspended test piece

Standard Association of Australia （SAA）

AS P5:1969 Punching patterns for round holes used in files and loose leaf binders
AS 6669:2007 Plywood - Formwork

GSO

GSO ISO/TR 7553:2009 Fertilizers - Sampling - Minimum mass of increment to be taken to be representative of the total sampling unit

IPC - Association Connecting Electronics Industries

IPC TM-650 5.5.3.2-1998 Specimen S - Hole Reliability

Others: 96-well plate samples