Solenoid valve several positions and several passes

Solenoid valve several positions and several passes, Total:113 items.

The international standard classification for "Solenoid valve several positions and several passes" includes: Limits and fits , Refrigerating technology .

The Chinese standard classification for "Solenoid valve several positions and several passes" includes: Basic standards and general methods , Refrigeration equipment .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 32337-2015 Pneumatic fluid power. Mounting interface surfaces of 3/2 solenoid valves
GB/T 1182-2008 Geometrical Product Specifications(GPS) - Geometrical tolerancing - Tolerances of form orientation location and run-out
GB/T 13319-2003 Geometrical Product Specifications (GPS) - Geometrical tolerancing - Positional tolerancing

未注明发布机构

DIN EN ISO 1101 E:2014-10 Product Geometric Specification (GPS) Geometric Tolerances Shape, Orientation, Positioning and Deflection Tolerances (Draft)
DIN EN ISO 1101:2017E Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out
DIN EN ISO 1101 E:2005-06 Product Geometric Specification (GPS) Geometric Tolerances Shape, Orientation, Positioning and Deflection Tolerances (Draft)
SAE AS40401-2013 Solenoid, Electrical, General Specification for
DIN EN ISO 1101 E:2015-07 Product Geometric Specification (GPS) Geometric Tolerances Shape, Orientation, Positioning and Deflection Tolerances (Draft)

Professional Standard - Machinery

JB/T 7223-1994 Two-position three-way solenoid valve for small refrigeration system
JB/T 7223-2011 3/2 Solenoid valve for small refrigeration system

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 1182-2018 Geometrical product specifications(GPS)—Geometrical tolerancing—Tolerances of form,orientation,location and run-out

工业和信息化部

SJ/T 11707-2018 Through silicon via geometry measurement terminology

CZ-CSN

CSN 73 6413-1996 Securing of geometrie track position of tramway lines
CSN 73 6412-1995 Geometrical arrangement of track for tramway lines
CSN ISO 1503:1994 Geometrical orientation and directions of movements
CSN 21 0317-1981 Forming machines. Automatic transfer presses for flat forming. Geometrical precision

AT-ON

ONORM A 6420-1957 geometric positioning
ONORM A 6433-1986 Geometry; quantities and units
ONORM ISO 5458:1989 Technical drawings; geometrical tolerancing; positional tolerancing

International Telecommunication Union (ITU)

ITU-R RAPPORT BS.516-4 FRENCH-1990 Field strength resulting from several electromagnetic fields

German Institute for Standardization

DIN EN ISO 5458:1999 Geometrical product specification (GPS) - Geometrical tolerancing - Positional tolerancing (ISO 5458:1998); German version EN ISO 5458:1998
DIN EN ISO 22081:2022-10 Geometrical product specifications (GPS) - Geometrical tolerancing - General geometrical specifications and general size specifications (ISO 22081:2021); German version EN ISO 22081:2021
DIN EN ISO 1101:2017-09 Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out (ISO 1101:2017); German version EN ISO 1101:2017
DIN EN ISO 1101:2008 Geometrical Product Specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out (ISO 1101:2004); German version EN ISO 1101:2005
DIN EN ISO 1101:2017 Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out (ISO 1101:2017); German version EN ISO 1101:2017
DIN EN 13848-5:2008 Railway applications - Track - Track geometry quality - Part 5: Geometric quality levels; German version EN 13848-5:2008

IET - Institution of Engineering and Technology

GEOMET THEO DIFF ELECTRO WAV-1979 Geometrical Theory of Diffraction for Electromagnetic Waves

Danish Standards Foundation

DS/EN ISO 5458:1999 Geometrical product specifications (GPS) - Geometrical tolerancing - Positional tolerancing
DS/ISO 3662:1989 Hydraulic fluid power. Pumps and motors. Geometric displacements
DS/EN ISO 1101:2013 Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out
DS/ISO 5458:1991 Technical drawings. Geometrical tolerancing. Positional tolerancing

Korean Agency for Technology and Standards (KATS)

KS B ISO 5458:2014 Geometrical Product Specifications(GPS) — Geometrical tolerancing — Positional tolerancing
KS B ISO 5458:2008 Geometrical Product Specifications(GPS)-Geometrical tolerancing-Positional tolerancing
KS A ISO 1503:2011 Spatial orientation and direction of movement－Ergonomic requirements
KS C 4530-1991(2021) General rules for solenoids
KS A ISO 1101:2016 Geometrical product specifications(GPS) — Geometricaltolerancing — Tolerances of form, orientation, location and run-out
KS A ISO 1101:2021 Geometrical product specifications(GPS) — Geometrical tolerancing — Tolerances of form, orientation, location and run-out
KS B 0148-2006 TECHNICAL DRAWINGS - GEOMETRICAL TOLERANCING - POSITIONAL TOLERANCING
KS B 0148-1992(2002) TECHNICAL DRAWINGS - GEOMETRICAL TOLERANCING - POSITIONAL TOLERANCING
KS B ISO 3662-2006(2011) Hydraulic fluid power－Pumps and motors－Geometric displacements
KS C 4531-1991(2021) AC Solenoids of General Purpose
KS C 4532-2006(2021) DC solenoids for general purpose
KS B 6355-2022 3-port solenoid operated valves for pneumatic use

Association Francaise de Normalisation

NF E04-559:1999 Geometrical product specifications (GPS). Geometrical tolerancing. Positional tolerancing.
NF F58-600-5/IN1:2010 Railway applications - Track - Track geometry quality - Part 5 : geometric quality levels - Plain line.
NF F58-600-5:2010 Railway applications - Track - Track geometry quality - Part 5 : geometric quality levels - Plain line.
NF E04-552:2005 Geometrical Product Specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out.
NF E04-552:2013 Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out
NF EN ISO 1101:2017 Geometrical product specification (GPS) - Geometrical tolerance - Shape, orientation, position and runout tolerance
NF E04-552*NF EN ISO 1101:2017 Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out
NF EN 10251:2015 Magnetic materials - Methods for determining the geometric characteristics of electrical steel sheets
NF F58-600-1:2004 Railway applications/track - Track geometry quality - Part 1 : characteristics of track geometry.

British Standards Institution (BSI)

BS EN ISO 5458:1999 Geometrical product specifications (GPS) - Geometrical tolerancing - Positional tolerancing
BS EN ISO 1101:2013 Geometrical product specifications (GPS). Geometrical tolerancing. Tolerances of form, orientation, location and run-out
BS ISO 1101:2005 Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out
BS EN ISO 1101:2005 Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out
BS EN ISO 1101:2017 Geometrical product specifications (GPS). Geometrical tolerancing. Tolerances of form, orientation, location and run-out
BS EN 13848-5:2008 Railway applications — Track — Track geometry quality — Part 5: Geometric quality levels
BS EN 13848-6:2014 Railway applications. Track. Track geometry quality. Characterisation of track geometry quality
BS EN 13848-5:2008+A1:2010 Railway applications - Track - Track geometry quality - Geometric quality levels - Plain line
BS ISO 11562:1997 Geometric product specifications (GPS). Surface texture. Profile method. Metrological characteristics of phase correct filters
BS EN 13848-1:2003+A1:2008 Railway applications - Track - Track geometry quality - Part 1:Characterisation of track geometry

VN-TCVN

TCVN 7295-2003 Geometrical product specification (GPS).Geometrical tolerancing.Positional tolerancing
TCVN 5906-2007 Geometrical Product Specifications (GPS).Geometrical tolerancing.Tolerances of form, orientation, location and run-out

AENOR

UNE-EN ISO 5458:1999 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - POSITIONAL TOLERANCING (ISO 5458:1998).

RO-ASRO

STAS 738-1960 Geometric dimensions. Unit of measure
STAS 7788-1982 Hydraulic drives GEOMETRIC DISPLACEMENTS

ZA-SANS

SANS 10111-2-4:2005 Geometrical Product Specifications (GPS) - Geometrical tolerancing - Positional tolerancing

CEN - European Committee for Standardization

EN ISO 1101:2005 Geometrical Product Specifications (GPS) - Geometrical tolerancing - Tolerances of form@ orientation@ location and run-out

SCC

NS-EN ISO 5458:1998 Geometrical product specifications (GPS) — Geometrical tolerancing — Positional tolerancing (ISO 5458:1998)
DIN EN ISO 5458 E:2016 Draft Document - Geometrical product specifications (GPS) - Geometrical tolerancing - Positional and pattern tolerancing (ISO/DIS 5458.2:2016); German and English version prEN ISO 5458:2016
NS-EN ISO 1101:2005 Geometrical Product Specifications (GPS) — Geometrical tolerancing — Tolerances of form, orientation, location and run-out (ISO 1101:2004)
NS-EN ISO 1101:2017 Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out (ISO 1101:2017)
DANSK DS/EN ISO 1101:2017 Geometrical product specifications (GPS) – Geometrical tolerancing – Tolerances of form, orientation, location and run-out (ISO 1101:2017)
UNE-EN ISO 1101:2006 Geometrical Product Specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out (ISO 1101:2004)
BS 6404-9:1988 Magnetic materials-Methods for determination of the geometrical characteristics of magnetic steel sheet and strip
ISO 1101:2012/DAmd 1 Geometrical product specifications (GPS) — Geometrical tolerance — Tolerance of shape, orientation, position and runout — Amendment 1

European Committee for Standardization (CEN)

EN ISO 5458:2018 Geometrical product specifications (GPS) - Geometrical tolerancing - Pattern and combined geometrical specification
EN ISO 1101:2013 Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and runout
EN ISO 1101:2017 Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form@ orientation@ location and run-out
EN ISO 5458:1998 Geometrical Product Specifications (GPS) - Geometrical Tolerancing - Positional Tolerancing ISO 5458:1998
EN 13848-5:2017 Railway applications - Track - Track geometry quality - Part 5: Geometric quality levels - Plain line@ switches and crossings
prEN 10251 Magnetic materials - Methods of determination of the geometrical characteristics of electrical steel sheet and strip

Japanese Industrial Standards Committee (JISC)

JIS Z 8907:1987 Geometrical orientation and directions of movements
JIS B 0025:1991 Technical drawings -- Geometrical tolerancing -- positional tolerancing
JIS B 0025:1998 Technical drawings -- Geometrical tolerancing -- Positional tolerancing
JIS B 0021:1998 Geometrical product specifications (GPS) -- Geometrical tolerancing -- Tolerancing of form, orientation, location and run-out

Lithuanian Standards Office

LST EN ISO 5458:2001 Geometrical product specifications (GPS) - Geometrical tolerancing - Positional tolerancing (ISO 5458:1998)
LST EN ISO 1101:2005 Geometrical Product Specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out (ISO 1101:2004)
LST EN 10251-2015 Magnetic materials - Methods of determination of the geometrical characteristics of electrical steel sheet and strip

International Organization for Standardization (ISO)

ISO 1101:2004 Geometrical Product Specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out
ISO 1101:2017 Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out
ISO 5458:1998 Geometrical Product Specifications (GPS) - Geometrical tolerancing - Positional tolerancing
ISO 1101:2012 Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out
ISO 1101:2012/Cor 1:2013 Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out; Technical Corrigendum 1
ISO 5458:1987 Technical drawings; Geometrical tolerancing; Positional tolerancing

SAE - SAE International

SAE ARP4945-1997 Aerospace-Solenoid Valve@ Hydraulic@ Three Way@ Two Position@ Direct Acting

PL-PKN

PN-EN ISO 22081-2021-07 E Geometrical product specifications (GPS) -- Geometrical tolerancing -- General geometrical specifications and general size specifications (ISO 22081:2021)
PN M01122-1993 Technical drawings. Geometrical tolerancing. Positional tolerancing

GSO

GSO ISO 1101:2021 Geometrical product specifications (GPS) — Geometrical tolerancing — Tolerances of form, orientation, location and run-out
BH GSO ISO 1101:2022 Geometrical product specifications (GPS) — Geometrical tolerancing — Tolerances of form, orientation, location and run-out

KR-KS

KS A ISO 1101-2016 Geometrical product specifications(GPS) — Geometricaltolerancing — Tolerances of form, orientation, location and run-out
KS A ISO 1101-2021 Geometrical product specifications(GPS) — Geometrical tolerancing — Tolerances of form, orientation, location and run-out

Society of Automotive Engineers (SAE)

SAE ARP4945A-2013 Aerospace-Solenoid Valve, Hydraulic, Three Way, Two Position, Direct Acting
SAE ARP4945-2002 Aerospace-Solenoid Valve, Hydraulic, Three Way, Two Position, Direct Acting
SAE ARP4945A-2003 Aerospace-Solenoid Valve, Hydraulic, Three Way, Two Position, Direct Acting

YU-JUS

JUS ISO 5459:1992 Technical drawings. Geometrical tolerancing. Datums and datum-systems for geometrical tolerances

RU-GOST R

GOST 34121-2017 Guinea meat (carcasses and their parts).Specifications
GOST R 53442-2015 Basic norms of interchangeability. Geometrical product specifications. Geometrical tolerancing. Tolerances of form, orientation, location and run-out
GOST R 55337-2012 Guinea meat (carcasses and their parts). Specifications

ES-UNE

UNE-EN ISO 1101:2017 Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out (ISO 1101:2017) (Endorsed by Asociación Española de Normalización in April of 2017.)

American National Standards Institute （ANSI)

ANSI/INCITS/ISO 19116:2004 Geographic information ?Positioning services Adopted by INCITS

ITE - Institute of Transportation Engineers

LP-685-2014 Guide for Geometric Design of Transit Facilities

Others: Several position several way solenoid valve,Solenoid valve several positions and several passes