Vibration Test Table

Vibration Test Table, Total:206 items.

The international standard classification for "Vibration Test Table" includes: Vibrations, shock and vibration measurements , Mechanical testing , Pumps , Industrial process measurement and control , Aerospace electric equipment and systems .

The Chinese standard classification for "Vibration Test Table" includes: Industrial automation and control device in general , Basic standards and general methods , Mechanical vibration, impact equipment and dynamic balancing machine , Pump , Basic standards and general methods , Railway engineering , Sewing machine .

Professional Standard - Ferrous Metallurgy

YBJ 21-1991 Vibration Test Procedure

Professional Standard - Aviation

HBm 66.50-1990 Mini-truck - Vibration Test Method for Instrument
HBm 58-1987 Vibration test method for instrumentation of miniature automobiles

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 13364-1992 Measurement of mechanical vibration for reciprocating pump
GB/T 10398-1989 The measuring method of vibration for small gasoline engine
GB/T 13364-2008 Measurement of mechanical vibration for reciprocating pump
GB/T 6587.4-1986 Vibration tests for electronic measuring instruments
GB/T 4451-1984 Methods of vibration(sinusoidal) test for use in industrial process measurement and control instrument
GB/T 13823.8-1994 for the calibration of vibration and shock pick－ps - Testing of transverse vibration sensitivity
GB/T 13860-1992 vibrations - Land vehicles - Method for reporting measured data
GB/T 44400-2024 Dual electro-dynamic shakers simultaneous vibration testing system
GB/T 4439-1984 Industrial process measurement and control instrument operating conditions; Vibration
GB/T 44401-2024 Tri-axis simultaneous electrodynamic testing system
GB/T 28784.2-2014 Mechanical vibration—Measurement of vibration on ships—Part 2: Measurement of structural vibration

Professional Standard - Aerospace

QJ 3045-1998 Test Method for Surface Acoustic Wave Resonator

Military Standard of the People's Republic of China-General Armament Department

GJB 7952-2012 Measurement methods for vibratory gyros

Professional Standard - Railway

TB/T 2488-1994 Test Method for Strain and Vibration of Ballast Bed

Professional Standard-Ships

CB 1320-1998 Torpedo vibration modal measurement method

National Metrological Verification Regulations of the People's Republic of China

JJG 2054-2015 Measuring Instruments for Vibration

Group Standards of the People's Republic of China

T/SZBX 148-2023 Electrodynamic vibration testing systems

Professional Standard - Light Industry

QB/T 1178-1991 Testing Method for Vibration of Industrial Sewing Machine

United States Navy

NAVY MIL-STD-2225-1994 VIBRATION AND NOISE TESTING FOR INSTRUMENT BEARINGS
NAVY A-A-59734 VALID NOTICE 1-2007 TACHOMETER, VIBRATING REED

Spanish Association for Standardization (UNE)

UNE 137003:2003 Corrugated fibreboard packaging for fruits and vegetables. Vibration tests at fixed low frequency.( vibrant and oscillant table).
UNE-EN 1032:2004 Mechanical vibration - Testing of mobile machinery in order to determine the vibration emission value
UNE-EN 1032:2004+A1:2009 Mechanical vibration - Testing of mobile machinery in order to determine the vibration emission value
UNE-EN 60068-2-6:2008 Environmental testing- Part 2-6: Tests- Test Fc: Vibration (sinusoidal)

SCC

BS 3015:1958 Glossary of terms used in vibration and shock testing
BS EN 1033:1996 Hand-arm vibration. Laboratory measurement of vibration at the grip surface of hand-guided machinery. General
NS-EN 1033:1995 Hand-arm vibration — Laboratory measurement of vibrations at the grip surface of hand-guided machinery — General
BS 2011-2.1FC:1983 Environmental testing. Tests-Test Fc. Vibration (sinusoidal)
IEC 60068-2-37:1973/COR1:1993 Corrigendum 1 - Environmental testing. Part 2: Tests. Test Fd: Random vibration wide band - General requirements
NS-EN 1032:2003 Mechanical vibration — Testing of mobile machinery in order to determine the vibration emission value
IEC 60068-2-35:1973/COR1:1993 Corrigendum 1 - Environmental testing. Part 2: Tests. Test Fd: Random vibration wide band - General requirements
IEC 60068-2-34:1973/COR1:1993 Corrigendum 1 - Environmental testing. Part 2: Tests. Test Fd: Random vibration wide band - General requirements
IEC 60068-2-36:1973/COR1:1993 Corrigendum 1 - Environmental testing. Part 2: Tests. Test Fd: Random vibration wide band - General requirements
BS PD 6467:1972 Arrangement of vibration tester
BS PD ISO/TR 230-8:2010 Test code for machine tools-Vibrations
DIN 45669-1 E:2018 Draft Document - Measurement of vibration immissions - Part 1: Vibration meters - Requirements and tests
NS-EN 1032:2003+A1:2008 Mechanical vibration — Testing of mobile machinery in order to determine the vibration emission value
AENOR UNE-EN 1032+A1:2009 Mechanical vibration - Testing of mobile machinery in order to determine the vibration emission value
BS PD ISO/TR 27609:2007 Vibration in hand-held tools. Vibration measurement methods for grinders. Evaluation of round-robin test
NS-EN 1032:1996 Mechanical vibration — Testing of mobile machinery in order to determine the whole-body vibration emission value — General
IEC 60068-2-64:1993/COR1:1993 Corrigendum 1 - Environmental testing - Part 2: Test methods - Test Fh: Vibration, broad-band random (digital control) and guidance
BS EN 1032:1997 Mechanical vibration. Testing of mobile machinery in order to determine the whole-body vibration emission value. General
CEI EN 60068-2-6:2009 Environmental testing Part 2-6: Tests - Test Fc: Vibration (sinusoidal)
DANSK DS/EN 60068-2-6:2008 Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal)
DIN EN 60068-2-57 E:2011 Draft Document - Environmental testing - Part 2-57: Test methods - Test Ff: Vibration - Time-history & sine-beat method (IEC 104/530/CDV:2010); German version FprEN 60068-2-57:2010
BS 2011-2.1FD:1973 Environmental testing. Tests-Test Fd. Random vibration - wide band, general requirements
BS 2011-2.1FDC:1973 Environmental testing. Tests-Test Fdc. Random vibration - wide band reproducibility low

Standard Association of Australia （SAA）

IEC 60068-2-6:1995/COR1:1995 Corrigendum 1 — Environmental testing — Part 2: Tests — Test Fc: Vibration (sinusoidal)

German Institute for Standardization

DIN 45661:2012 Vibration measuring instrumentation - Vocabulary
DIN 45661:2016 Vibration measuring instrumentation - Vocabulary
DIN 45669-1 Berichtigung 1:2012 Measurement of vibration immission - Part 1: Vibration meters - Requirements and tests, Corrigendum to DIN 45669-1:2010-09
DIN EN 1032:2009-02 Mechanical vibration - Testing of mobile machinery in order to determine the vibration emission value; German version EN 1032:2003+A1:2008 / Note: DIN EN 1032 (2003-09) remains valid alongside this standard until 2009-12-28.
DIN 45669-1:2020-06 Measurement of vibration immissions - Part 1: Vibration meters - Requirements and tests
DIN 45669-1:2019-03 Measurement of vibration immissions - Part 1: Vibration meters - Requirements and tests
DIN 8259:1965 Impulse jewels for watches
DIN 45669-1 E:2018-05 Measurement of vibration immissions - Part 1: Vibration meters - Requirements and tests
DIN 45669-1:2019-09 Measurement of vibration immissions - Part 1: Vibration meters - Requirements and tests
DIN 45669-1 E:2008-09 Measurement of vibration immissions - Part 1: Vibration meters - Requirements and tests
DIN EN 1032:2009 Mechanical vibration - Testing of mobile machinery in order to determine the vibration emission value (includes Amendment A1:2008); English version of DIN EN 1032:2009-02
DIN 45669-1:2020 Measurement of vibration immissions - Part 1: Vibration meters - Requirements and tests
DIN 45669-1:2010 Measurement of vibration immission - Part 1: Vibration meters - Requirements and tests
DIN EN 12274-7:2005 Slurry surfacing - Part 7: Shaking abrasion test; German version EN 12274-7:2005
DIN EN 60068-2-6:1996 Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal)
DIN ISO 13373-2 E:2004-03 Condition monitoring and diagnostics of machines - Vibration condition monitoring - Part 2: Processing, analysis and presentation of vibration data
DIN ISO 13373-2:2006 Condition monitoring and diagnostics of machines - Vibration condition monitoring - Part 2: Processing, analysis and presentation of vibration data (ISO 13373-2:2005);English version of DIN ISO 13373-2:2006-01
DIN EN 12274-7 E:2001-10 Slurry surfacing - Part 7: Shaking abrasion test

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc.

ASHRAE AN-04-2-3-2004 Shake Table Testing
ASHRAE 87.1-1992 Method of Testing Fan Vibration - Blade Vibrations and Critical Speeds

GOSTR

GOST R 53963.2-2010 Vibration. Measurement of vibrations in buildings. Measuring instrumentation tests
GOST R ISO 20283-2-2017 Mechanical vibration. Measurement of vibration on ships. Part 2. Measurement of structural vibration
GOST 28988-1991 Fluid power systems. Vibration characteristics, vibration tests
GOST 31351-2007 Vibration. Industrial fans. Measurement of vibration

British Standards Institution (BSI)

BS EN ISO 8041-1:2017 Human response to vibration. Measuring instrumentation. General purpose vibration meters
BS EN 1033:1996(1999) Hand - arm vibration — Laboratory measurement of vibration at the grip surface of hand - guided machinery — General
BS EN IEC 60068-2-86:2024 Environmental testing - Tests. Test Fx: Vibration. Multi-exciter and multi-axis method
BS EN 1032:2003+A1:2008 Mechanical vibration - Testing of mobile machinery in order to determine the vibration emission value
BS EN 1032:2003+A1:2008(2009) Mechanical vibration — Testing of mobile machinery in order to determine the vibration emission value
BS EN 12274-7:2005 Slurry surfacing - Test methods - Shaking abrasion test
PD ISO/TR 230-8:2010 Test code for machine tools. Vibrations
BS EN 12274-7:2005(2006) Slurry surfacing - Test methods - Shaking abrasion test
BS ISO 23670:2021 Space systems. Vibration testing
BS 6140-1:1981 Test equipment for generating vibration - Methods of describing characteristics of electrodynamic test equipment for generating vibration
BS ISO 24411:2022 Space systems. Micro-vibration testing
BS EN 1032:2003 Mechanical vibration - Testing of mobile machinery in order to determine the vibration emission value
BS ISO 13373-2:2006 Condition monitoring and diagnostics of machines - Vibration condition monitoring - Processing, analysis and presentation of vibration data
BS ISO 20283-2:2009 Mechanical vibration. Measurement of vibration on ships. Measurement of structural vibration
BS ISO 20283-2:2008 Mechanical vibration - Measurement of vibration on ships - Measurement of structural vibration
PD ISO/TR 27609:2007 Vibration in hand-held tools. Vibration measurement methods for grinders. Evaluation of round-robin test
BS ISO 20283-2:2008(2009) Mechanical vibration — Measurement of vibration on ships Part 2 : Measurement of structural vibration
BS ISO 20283-3:2006+A1:2016 Mechanical vibration. Measurement of vibration on ships - Pre-installation vibration measurement of shipboard equipment
20/30386448 DC BS ISO 23670. Space systems. Vibration testing
BS ISO 20283-4:2012+A1:2014 Mechanical vibration. Measurement of vibration on ships. Measurement and evaluation of vibration of the ship propulsion machinery
BS EN IEC 60068-2-85:2019 Environmental testing - Tests. Test Fj. Vibration. Long time history replication
BS EN 60068-2-64:2008+A1:2019 Environmental testing - Tests. Test Fh: Vibration, broadband random and guidance
BS 2782-3 Method 323D:1996 Methods of testing plastics. Mechanical properties. Torsional vibration. Non-resonance method
BS 2782-3 Method 323B:1996 Methods of testing plastics. Mechanical properties. Flexural vibration. Non-resonance method
BS 2782-3 Method 323C:1996 Methods of testing plastics. Mechanical properties. Shear vibration. Non-resonance method
BS ISO 16063-31:2009 Methods for the calibration of vibration and shock transducers - Testing of transverse vibration sensitivity
BS ISO 14839-1:2002+A1:2010 Mechanical vibration. Vibration of rotating machinery equipped with active magnetic bearings. Vocabulary
BS EN 60255-21-1:1996 Electrical relays. Vibration, shock, bump and seismic tests on measuring relays and protection equipment. Vibration tests (sinusoidal)
BS ISO 20283-3:2006 Mechanical vibration - Measurement of vibration on ships - Pre-installation vibratory noise measurement of shipboard equipment

AT-ON

ONORM M 6326 Teil.1-1989 Rolling bearings; Vibration and noise; methods of Vibration measurement

European Committee for Standardization (CEN)

EN 1033:1995 Hand-Arm Vibration - Laboratory Measurement of Vibration at the Grip Surface of Hand- Guided Machinery - General
prENV 28041-1992 Human response to vibration; measuring instruments (ISO 8041:1990)
EN 1032:1996 (WITHDRAWN) Mechanical Vibration - Testing of Mobile Machinery in Order to Determine the Whole-Body Vibration Emission Value - General
EN 1032:1996/PRA1:1997 AMD prA1 Mechanical Vibration - Testing of Mobile Machinery in Order to Determine the Whole-Body Vibration Emission Value - General
EN 12274-7:2005 Slurry surfacing - Test methods - Part 7: Shaking abrasion test

SE-SIS

SIS SEN 43 16 06-1971 Environmental testing. Vibration Test F
SIS SS-ISO 8568:1990 Vibration andshock — Mechanical vibration andshock — Shock-testing machines — Characteristics and performance

Association Francaise de Normalisation

NF E90-403:1993 HUMAN REPONSE TO VIBRATION. MEASURING INSTRUMENTATION. (EUROPEAN PRESTANDARD ENV 28041).
NF E90-453*NF EN 1032+A1:2009 Mechanical vibration - Testing of mobile machinery in order to determine the vibration emission value.
NF EN 1032+A1:2009 Mechanical vibrations - Testing of mobile machines for the purpose of determining the vibration emission value
NF EN 1032/IN1:2009 Mechanical vibrations - Testing of mobile machines for the purpose of determining the vibration emission value
P15-437:1987 Hydraulic binders. Testing technics. Characterization of cements by fluidity measurement under mortar vibration.
NF E90-453/IN1*NF EN 1032/IN1:2009 Mechanical vibration - Testing of mobile machinery in order to determine the vibration emission value
NF P98-857-7*NF EN 12274-7:2005 Slurry surfacing - Test methods - Part 7 : shaking abrasion test
NF ISO 20283-2:2014 Vibrations mécaniques - Mesurage des vibrations à bord des navires - Partie 2 : mesurage des vibrations structurelles
NF E90-453:2003 Mechanical vibration - Testing of mobile machinery in order to determine the vibration emission value.
NF ISO 10055:2014 Mechanical vibration - Requirements for vibration testing of on-board equipment and machine components
NF E90-972-2*NF ISO 20283-2:2014 Mechanical vibration - Measurement of vibration on ships - Part 2 : measurement of structural vibration
NF EN 60068-2-6:2008 Essais d'environnement - Partie 2-6 : essais - Essai Fc : vibrations (sinusoïdales)
NF E90-230:1982 Auxiliary tables for vibration generators - Methods for describing characteristics
NF E90-373-2:2006 Condition monitoring and diagnostics of machines - Vibration condition monitoring - Part 2 : processing, analysis and presentation of vibration data.
NF E90-373-2*NF ISO 13373-2:2016 Condition monitoring and diagnostics of machines - Vibration condition monitoring - Part 2 : processing, analysis and presentation of vibration data
NF E90-453:1997 Mechanical vibration. Testing of mobile machinery in order to determine the whole-body vibration emisson value. General.

GB-REG

REG NASA-HDBK-7004 REV C-2012 FORCE LIMITED VIBRATION TESTING
REG NASA-LLIS-0775-2000 Lessons Learned ?Random Vibration Testing

GM Europe

GME L-9B-1-2008 Steering wheel vibration test

DIN

DIN 45669-1:2019 Measurement of vibration immissions - Part 1: Vibration meters - Requirements and tests

GSO

OS GSO EN 1032:2011 Mechanical vibration - Testing of mobile machinery in order to determine the vibration emission value
GSO ISO 8608:2024 Mechanical vibration — Road surface profiles — Reporting of measured data
OS GSO IEC 60068-2-6:2010 Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal)
GSO IEC 60068-2-6:2010 Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal)
BH GSO IEC 60068-2-6:2011 Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal)
OS GSO ISO/TR 230-8:2010 Test code for machine tools -- Part 8: Vibrations
GSO ISO/TR 230-8:2013 Test code for machine tools -- Part 8: vibration
BH GSO ISO 20283-3:2016 Mechanical vibration -- Measurement of vibration on ships -- Part 3: Pre-installation vibration measurement of shipboard equipment

Korean Agency for Technology and Standards (KATS)

KS B 4009-1986 Methods of vibration testing for machine tools
KS B 4009-2002(2012) Methods of vibration testing for machine tools
KS B 0141-2001 Mechanical vibration of rotating and reciprocating machinery-Requirements for instruments for measuring vibration severity
KS M 6604-2016 Testing method for rubber vibration islators
KS B ISO 20283-2:2019 Mechanical vibration — Measurement of vibration on ships — Part 2: Measurement of structural vibration
KS B 6540-2013 Testing Method of Vibrating Rollers
KS B ISO 20283-2:2014 Mechanical vibration — Measurement of vibration on ships — Part 2: Measurement of structural vibration
KS B ISO 10816-1:2011 Mechanical vibration-Evaluation of machine vibration by measurements on non-rotating parts-Part 1:General guidelines
KS B ISO 10816-1:2016 Mechanical vibration－Evaluation of machine vibration by measurements on non-rotating parts－Part 1：General guidelines
KS C IEC 60068-2-6-2015(2020) Environmental testing — Part 2-6: Tests — Test Fc: Vibration(sinusoidal)
KS C IEC 60068-2-6-2020 Environmental testing — Part 2-6: Tests — Test Fc: Vibration(sinusoidal)
KS B ISO 13373-2:2007 Condition monitoring and diagnostics of machines－Vibration condition monitoring－Part 2：Processing, analysis and presentation of vibration data
KS B ISO 13373-2:2017 Condition monitoring and diagnostics of machines —Vibration condition monitoring — Part 2: Processing, analysis and presentation of vibration data

CZ-CSN

CSN 35 0019 Cast.02-1979 Rotating electrical machines. Vibration tests
CSN 35 0019 Cast.03-1979 Rotating electrical machines. Vibration, tests of aggregates
CSN 35 6854-1987 Vibration. Vibration isolators. General requirements for tests

PL-PKN

PN N01355-1991 Vibrations. Measuring instrumentation for measuring human response to vibrations. Requirements and tests
PN N01352-1991 Vibration. Work place vibration measuring requirements
PN S04100-1991 Vibration. Test methods and evaluation of mechanical vibration at work places of vehicles
PN E88607-1990 Electrical relays Vibration shock, bump and seismic tests on measuring relays and protection equipmentShock and bump tests

Society of Automotive Engineers (SAE)

SAE J2380-2009 Vibration Testing of Electric Vehicle Batteries
SAE J2380-2013 Vibration Testing of Electric Vehicle Batteries
SAE J1765-2011 SAE Miniature Bulb Vibration Test
SAE J1765-1995 SAE Miniature Bulb Vibration Test
SAE J1765-2006 SAE Miniature Bulb Vibration Test
SAE J577-2011 Vibration Test Machine
SAE ARP6068-2010 Gas Turbine Engine Test Facility Vibration Measurement
SAE ARP6068-2017 Gas Turbine Engine Test Facility Vibration Measurement
SAE J577-1973 VIBRATION TEST MACHINE
SAE TS360-2-1990 TS360 Test for Electrical Connectors Random Vibration
SAE J577-1964 VIBRATION TEST MACHINE

SAE - SAE International

SAE J2380-2021 Vibration Testing of Electric Vehicle Batteries
SAE J577-2005 Vibration Test Machine and Operation Procedure
SAE J577-2015 VIBRATION TEST MACHINE
SAE J577-1958 VIBRATION TEST MACHINE

RU-GOST R

GOST R 53080-2008 Vibration. Testing of mobile machinery in order to determine the vibration emission value. Industrial trucks
GOST ISO 8579-2-2002 Vibration. Determination of mechanical vibrations of gear units during acceptance testing
GOST ISO 16063-31-2013 Mechanical vibration. Methods for the calibration of vibration and shock transducers. Part 31. Testing of transverse vibration sensitivity
GOST 31421-2010 Vibration. Testing of mobile machinery in order to determine the vibration emission value. Industrial trucks
GOST 31193-2004 Vibration. Testing of mobile machinery in order to determine the vibration emission value. General requirements
GOST R 53964-2010 Mechanical vibration. Measurements of vibration in structures. Guidance on measurement methods

Electronic Components, Assemblies and Materials Association

ECA TEP146-1964 Philosophy of Vibration Testing of Receiving Tubes (TEP46)

Acoustical Society of America (ASA)

ASA S2.1-2009 American National Standard Mechanical vibration, shock and condition monitoring - Vocabulary

GOST

GOST R 50209-1992 Vibration. Requirements for means of testing mechanical hammers

KR-KS

KS B ISO 20283-2-2019 Mechanical vibration — Measurement of vibration on ships — Part 2: Measurement of structural vibration
KS B ISO 13373-2-2022 Condition monitoring and diagnostics of machines — Vibration condition monitoring — Part 2: Processing, analysis and presentation of vibration data

ECIA - Electronic Components Industry Association

TEP146-1964 Philosophy of Vibration Testing of Receiving Tubes (TEP46)

IN-BIS

IS 8580-1977 Vibrating Screen Supplier Data Sheet
IS 8658-1978 Vibrating Screen Data Sheet for Buyers

AIA/NAS - Aerospace Industries Association of America Inc.

NAS3354-1963 Fixtures - Vibration Test - Self-Locking Nuts
NASM1312-7-1997 Fasteners Test Methods; Method 7 Vibration

Institute of Environmental Sciences and Technology

IEST RP-DTE022.1-2014 Multi-shaker Test and Control

American Society for Testing and Materials (ASTM)

ASTM RR-D10-1011 1997 D3580-Test Methods for Vibration (Vertical Linear Motion) Test of Products
ASTM D999-07 Standard Test Methods for Vibration Testing of Shipping Containers
ASTM D999-08 Standard Test Methods for Vibration Testing of Shipping Containers

International Organization for Standardization (ISO)

ISO 20283-2:2008 Mechanical vibration - Measurement of vibration on ships - Part 2: Measurement of structural vibration
ISO 8608:2016 Mechanical vibration - Road surface profiles - Reporting of measured data
ISO 8041:2005/cor 1:2007 Human response to vibration - Measuring instrumentation; Technical Corrigendum 1
ISO 13373-2:2005 Condition monitoring and diagnostics of machines - Vibration condition monitoring - Part 2: Processing, analysis and presentation of vibration data
ISO 13373-2:2016 Condition monitoring and diagnostics of machines - Vibration condition monitoring - Part 2: Processing, analysis and presentation of vibration data
ISO/TR 27609:2007 Vibration in hand-held tools — Vibration measurement methods for grinders — Evaluation of round-robin test