Orifice diameter

Orifice diameter, Total:54 items.

The international standard classification for "Orifice diameter" includes: Ceramic products , Drills, countersinks, reamers , Turning tools , Screw threads in general .

The Chinese standard classification for "Orifice diameter" includes: Special ceramics , Cutting tools , Cutters , Measuring devices .

Taiwan Provincial Standard of the People's Republic of China

CNS 4949-1979 Tapping Screws, Applications and Core Holes
CNS 4245-1978 Clearance Holes for Metric Bolts (1.6 up to and Including 150 mm Thread Diameter)
CNS 211-1953 Diameters of Drill Heads (for Drilling Bolt Holes)

Professional Standard - Machinery

JB/ZQ 4719-2006 Diameter of twist drill for drilling hole before inside whorl treatment or car (bore) hole diameter
JB/T 9987-1999 Diameter of the twist drill used before tapping

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 2679.14-1996 Filter paper and filterboard--Determination of maximum pore diameter
GB/T 1967-1996 Test method for pore diameter of porous ceramic
GB/T 20330-2006 Drill diameter for use prior to tapping screw threads

Professional Standard - Aerospace

QJ 1133.13-1987 Mechanical Clamped Lathe Tool - 75°Pressure Plate Bore Lathe Tool (Tool Bar Diameter=16)
QJ 1133.16-1987 Mechanical Clamped Lathe Tool - 90° Pressure Plate Bore Lathe Tool (Tool Bar Diameter=25)
QJ 2920-1997 Forward Underport Diameter of MJ Internal Thread Tapping
QJ 1133.14-1987 Mechanical Clamped Lathe Tool - 75°Pressure Plate Bore Lathe Tool (Tool Bar Diameter=25)
QJ 1133.15-1987 Mechanical Clamped Lathe Tool - 90° Pressure Plate Bore Lathe Tool (Tool Bar Diameter=16)

German Institute for Standardization

DIN 7952-2:1971-10 Sheet Metal Rim Holes with Screw Thread; Prepunch Hole Diameters
DIN 7952-2:1971 Sheet Metal Rim Holes with Screw Thread; Prepunch Hole Diameters
DIN 28182:1987 Tubular heat exchangers; tube pitches, diameter of bores in tube sheets, baffles and support plates
DIN 28182:2007 Tubular heat exchangers - Tube pitches, diameter of bores in tube sheets, baffles and support plates
DIN 20311:2002 Drill tubes with diameters exceeding 100 mm for large hole boring in mining
DIN 20311:2002-11 Drill tubes with diameters exceeding 100 mm for large hole boring in mining
DIN 2245-1:1989 GO and NOT GO plug gauges from 1 mm to 40 mm nominal diameter
DIN 66139:2012-03 Pore size analysis - Representation of pore size distributions / Note: To be replaced by DIN 66139 (2022-12).
DIN 66139 E:2010-02 Pore size analysis - Representation of pore size distributions

SE-SIS

SIS SMS 1724-1965 Drilling diameter
SIS SMS 1523-1950 Self-turning screws, hole diameter, datum

Korean Agency for Technology and Standards (KATS)

KS B ISO 273:2010 Diameter of clearance holes and counterbores for bolts and screws
KS B 2305-2006 Nominal size and bore of valves
KS B ISO 273-2020 Diameter of clearance holes and counterbores for bolts and screws
KS B ISO 273-2010(2020) Diameter of clearance holes and counterbores for bolts and screws

North Atlantic Treaty Organization Standards Agency

STANAG 3212-1998 DIAMETERS FOR GRAVITY FILLING ORIFICES

RU-GOST R

GOST 21586-1976 Countersinks for machining holes diameters from 3 to 80 mm. Hole tolerance
GOST 19257-1973 Holes for threading metric thread. Diameters
GOST 21348-1975 Holes for threading pipe cylindrical thread. Diameters
GOST 21350-1975 Holes for threading pipe taper screw thread. Diameters
GOST 12813-1967 Aircraft and helicopter tank filling orifices. Diameters
GOST 28701-1990 Wood-cutting tool. Cutters. Diameters of tool mounting bore

Danish Standards Foundation

DS 2390:1993 Centre holes 90 degree. Determination fo dimensions
DS 2389:1993 Centre holes 60 degree. Determination of dimensions

CZ-CSN

CSN 10 7015-1980 Vacuum technology. Bore diameters.
CSN 20 1505-1983 Metal-working machines. Tool hole diameters for cutting tools with cylindrical shank

TIA - Telecommunications Industry Association

EIA/TIA-455-167A-1992 FOTP-167 Mode Field Diameter@ Variable Aperture in the Far Field

American National Standards Institute （ANSI)

ANSI/EIA/TIA 455-167A:1992 Mode Field Diameter Measurement - Variable Aperture Method in the Farfield

IPC - Association Connecting Electronics Industries

IPC TR-579 CD-1988 Round Robin Reliability Evaluation of Small Diameter Plated Through Holes in Printed Wiring Boards

NL-NEN

NEN 2835-1971 Gauges - Plug gauges for holes, diameters 1 up to and including 40 mm
NEN 2810-1987 Gauges - Plug gauges for holes, diameters 1 up to and including 40 mm

Institute of Interconnecting and Packaging Electronic Circuits (IPC)

IPC TR-579-1988 Round Robin Reliability Evaluation of Small Diameter Plated Through Holes in Printed Wiring Boards

HU-MSZT

MSZ 3996-1968 120 degree conical drill diameter = 16-40
MSZ 3995-1968 90 degree tapered drill diameter=8-50

Association Francaise de Normalisation

NF G32-302:1981 Habillement - Accessoires pour vêtements - Boutons à 2 ou 4 trous - Diamètres et entraxes des trous

TR-TSE

TS 511-1967 Light Metal Rivets for Shipbuilding Nominal Diameters, Rivet Hole Diameters and Clearances

PL-PKN

PN M57025-1974 Holes in steel and cas? iron Diamefers of drills and reamers

Spanish Association for Standardization (UNE)

UNE 25161:1963 SELECTIVE LIST OF THE HOLE DIAMETERS FOR STEEL RIVET SETTING (2-20 MM DIAMETERS).
UNE 25163:1963 SELECTIVE LIST OF THE DIAMETERS OF SCREWS CLEARANCE HOLES (4-24 MM).

RO-ASRO

STAS SR ISO 10323:1995 Dental rotary instruments - Bore diameters for discs and wheels

NATO - North Atlantic Treaty Organization

STANAG 3212-1988 Diameters for Gravity Filling Orifices (ED 5 AMD 2)

Others: six-well plate diameter,Diameter of six-well plate,Orifice Diameter,six-well plate diameter,Orifice diameter,A six-well plate is several times that of a 24-well plate,The diameter of a six-well plate,What is the diameter of the six-hole plate,Orifice plate with diameter 5,Diameter of a 6-well plate,What is the diameter of the six-hole plate in centimeters,Orifice Diameter,Six-well plate approximate diameter,hole diameter,Orifice Diameter,authentic orifice,8-well and 16-well plate diameters,Four-well and five-well plates,Recommended diameter of hole