streaming device
streaming device, Total:103 items.
The international standard classification for "streaming device" includes: Implants for surgery, prosthetics and orthotics , Small craft , Refrigerating technology , Ventilators. Fans. Air-conditioners .
The Chinese standard classification for "streaming device" includes: Extracorporeal circulation, artificial organ and prosthesis device , Hydraulic and pneumatic device , Devices for small vessel , Refrigeration equipment , Environmental protection equipment .
Professional Standard - Railway
- TB/T 2437-1993 Specifications for locomotive semi-conductor converters
Professional Standard - Medicine
- YY 0583-2005 Chest draining equipments for single use- Type of water-seal bottle
Professional Standard - Chemical Industry
- HG/T 21581-1995HK06 Flange pressure taking and throttling device installation manual
Professional Standard - Electricity
- DL/T 2656-2023 Guidelines of model selection and acceptance condition for ejecting mixer device applied for heating
Professional Standard - Machinery
- JB/T 12117-2015 Fluidized equipment-Technical requirements
- JB/T 7252-1994 Valve Type Orifice Plate Throttling Devices
Military Standard of the People's Republic of China-General Armament Department
- GJB 3037A-2021 Specifications for ship rectification devices
- GJB 3037-1997 General specifications for ship rectification devices
工业和信息化部
- JB/T 7252-2018 orifice throttling device
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China
- GB/T 22732-2008 Food quick freezer—Individually quick freezing freezer
- GB/T 18814-2002 Small craft-Electrical systems - Alternating current installations
- GB/T 18814-2024 Small craft—Electrical systems—Alternating and direct current installations
- GB/T 19311-2003 Small craft—Electrical systems—Extra-low-voltage d.c. installations
National Metrological Technical Specifications of the People's Republic of China
- JJF 1633-2017 Calibration Specification for Hemoperfusion Equipment
Group Standards of the People's Republic of China
- T/CMSA 0011-2019 Current-limiting lightning-termination device
Professional Standard - Energy
- NB/T 11214-2023 Modular residual current device for DC system (DC-MRCD)
Professional Standard - Environmental Protection
- HJ 2538-2014 Technical requirement for environmental protection products Grit removal equipment in grit chamber
Professional Standard - Electron
- SJ/T 31392-1994 Requirements of readiness and methods of inspection and assessment for rectifying devices
International Electrotechnical Commission (IEC)
- IEC 62199:2004 Bushings for d.c. application
- IEC PAS 61975:2004 System tests for high-voltage direct current (HVDC) installations
- IEC 61229:1993+AMD1:1998+AMD2:2002 CSV Rigid protective covers for live working on a.c. installations
KR-KS
- KS C 4402-2003(2023) Charging rectifier device
Association Francaise de Normalisation
- NF C52-099:2004 Bushings for d.c. application.
- NF E86-604-2*NF EN 13616-2:2016 Overfill prevention devices for static tanks for liquid fuels - Part 2 : overfill prevention devices without a closure device
- NF E86-604-1*NF EN 13616-1:2016 Overfill prevention devices for static tanks for liquid fuels - Part 1 : overfill prevention devices with closure device
- NF EN ISO 13297:2021 Petits navires - Installations électriques - Installations à courant alternatif et continu
- NF EN ISO 13297/A1:2022 Petits navires - Installations électriques - Installations à courant alternatif et continu - Amendement 1
- NF J95-033:2013 Small craft - Electrical systems - Extra-low-voltage d.c. installations
German Institute for Standardization
- DIN EN 62199:2005 Bushings for d.c. application (IEC 62199:2004); German version EN 62199:2004
British Standards Institution (BSI)
- BS IEC/IEEE 65700-19-03:2014 Bushings for DC application
- BS G 209:1970 Specification for transformer rectifier units
- BS EN 60875-1:2001 Fibre optic branching devices - Generic specification
- BS 7071:1992 Specification for portable residual current devices
- BS MA 27:1974 Specification for sight-flow indicators for tank overflow systems
- BS EN ISO 10133:2012 Small craft. Electrical systems. Extra-low-voltage d.c. installations
- BS EN ISO 10133:2017 Small craft. Electrical systems. Extra-low-voltage d.c. installations
SCC
- CSA B64.10-17/B64.10.1-2017 Selection and installation of backflow prevention devices/Maintenance and field testing of backflow prevention devices
- CAN/CSA-B64.10-01/B64.10.1-2001(R2007) Manual for the Selection and Installation of Backflow Prevention Devices/Manual for the Maintenance and Field Testing of Backflow Prevention Devices
- BS 7071:1989 Specification for portable residual current devices
- BS EN 13544-3:2001 Respiratory therapy equipment. Air entrainment devices
- DANSK DS/ISO 13297/AMD 1:2020 Small craft – Electrical systems – Alternating and direct current installations
- IAPMO IGC 267-2015 Hydrants without Integral Backflow Preventers
- CAN/CSA-B64.6-M88-1988 Backflow prevention devices with two check valves (DAr2C)
- BS EN ISO 10133:2001 Small craft. Electrical systems. Extra-low-voltage d.c. installations
- DANSK DS/ISO 23372:2022 Anesthetic and respiratory equipment – Air entrainment devices
- CAN/CSA-B64.10-M88-1988 Backflow Prevention Devices - Selection, Installation, Maintenance, and Field Testing
- BS 7711-2:1994 Respiratory therapy equipment-Specification for air entrainment devices
- CSA B64.10-M1981-1981 Backflow Prevention Devices - Selection, Installation, Maintenance, and Field Testing
- SAA HB113-1998 RESIDUAL CURRENT DEVICES - What they do and how they do it
Standard Association of Australia (SAA)
- AS 2845:1986 Water supply - Mechanical backflow prevention devices
- AS 2845.2:1994 Water supply - Backflow prevention devices - Air gaps and break tanks
- AS 2845.2:1996 Water supply - Backflow prevention devices - Air gaps and break tanks
- AS 3190:1994 Approval and test specification - Residual current devices (current-operated earth-leakage devices)
- AS 3190:1990 Approval and test specification - Residual current devices (current-operated earth-leakage devices)
- AS 2845.3:2010 Field testing and maintenance of water supply backflow prevention testable devices
- AS 2845.3:2010/Amdt 1:2010 Field testing and maintenance of water supply backflow prevention testable devices
European Committee for Electrotechnical Standardization(CENELEC)
- EN 62199:2004 Bushings for d.c. application
American Industrial Hygiene Association (AIHA)
- ASSE 1013-2009 Performance Requirements for Reduced Pressure Principle Backflow Preventers and Reduced Pressure Principle Fire Protection Backflow Preventers
- ASSE 1015-2009 Performance Requirements for Double Check Backflow Prevention Assemblies and Double Check Fire Protection Backflow Prevention Assemblies
American National Standards Institute (ANSI)
- ANSI/ASSE 1013-2011 Performance Requirements for Reduced Pressure Principle Backflow Preventers and Reduced Pressure Principle Fire Protection Backflow Preventers
- ANSI/ASSE 1035-2002 Laboratory Faucet Backflow Preventer
- ANSI/ASSE 1024-2004 Dual Check Valve Type Backflow Preventers
- ANSI/TIA/EIA 620000-1994 Generic Specification for Passive Optical Branching Devices
- ANSI/ASSE 1052-2004 Performance Requirements for Hose Connection Backflow Preventers
- ANSI/ASSE 1035-2008 Performance Requirements for Laboratory Faucet Backflow Preventers
GSO
- GSO ISO 13297:2013 Small craft -- Electrical systems -- Alternating current installations
- GSO ISO 10133:2013 Small craft -- Electrical systems -- Extra-low-voltage d.c. installations
- GSO ISO 23372:2024 Anaesthetic and respiratory equipment — Air entrainment devices
- BH GSO ISO 10133:2016 Small craft -- Electrical systems -- Extra-low-voltage d.c. installations
Korean Agency for Technology and Standards (KATS)
- KS V ISO 13297-2001(2021) Small craft-Electrical systems-Alternating current installations
- KS C IEC 61229-2017(2022) Rigid protective covers for live working on a.c. installations
- KS V ISO 10133-2020 Small craft-Electrical systems-Extra-low-voltage d.c. installations
- KS V ISO 10133:2015 Small craft-Electrical systems-Extra-low-voltage d.c. installations
- KS V ISO 10133:2001 Small craft-Electrical systems-Extra-low-voltage d.c. installations
South African Bureau of Standard
- SANS 13297:2008 Small craft - Electrical systems - Alternating current installations
- SANS 561:2008 Small craft - Electrical systems - Extra-low-voltage d.c. installations
Spanish Association for Standardization (UNE)
- UNE-EN ISO 13297:2021/A11:2023 Small craft - Electrical systems - Alternating and direct current installations
- UNE-EN ISO 13297:2021 Small craft - Electrical systems - Alternating and direct current installations (ISO 13297:2020)
- UNE-EN 61229/A2:2003 Rigid protective covers for live working on a.c. installations.
European Committee for Standardization (CEN)
- EN ISO 13297:2021/A11:2023 Small craft - Electrical systems - Alternating and direct current installations
- EN ISO 10133:2017 Small craft - Electrical systems - Extra-low-voltage d.c. installations
- EN 12729:2002 Devices to prevent pollution by backflow of potable water - Controllable backflow preventer with reduced pressure zone - Family B; Type A
Canadian Standards Association (CSA)
- CSA B64 SERIE-07-2007 Vacuum breakers and backflow prevention devices
HU-MSZT
- MSZ 6574/7-1970 Quality requirements for cadmium layers in current devices
IN-BIS
- IS 5131-1969 Specification for diverters with controls for fire brigade use
CZ-CSN
- CSN 34 1018-1964 Protection of heavy-current installations against overvoltage
CEN - European Committee for Standardization
- EN ISO 10133:2012 Small craft - Electrical systems - Extra-low-voltage d.c. installations
- EN ISO 10133:2000 Small Craft - Electrical Systems - Extra-Low-Voltage D.C. Installations
International Organization for Standardization (ISO)
- ISO 10133:2000 Small craft - Electrical systems - Extra-low-voltage d.c. installations
- ISO 10133:2012 Small craft - Electrical systems - Extra-low-voltage d.c. installations
- ISO 13297:2020/Amd 1:2022 Small craft — Electrical systems — Alternating and direct current installations — Amendment 1
Institute of Electrical and Electronics Engineers (IEEE)
- IEC/IEEE 65700-19-03:2014 Bushings for DC application
Danish Standards Foundation
- DS/EN 61229:1996 Rigid protective covers for live working on a.c. installations
- DS/EN 61229/A1:1998 Rigid protective covers for live working on a.c. installations
- DS/EN ISO 10133:2013 Small craft - Electrical systems - Extra-low-voltage d.c. installations
- DS/EN 61229/A2:2003 Rigid protective covers for live working on a.c. installations
RO-ASRO
- STAS 12100/7-1986 Equipaments for wellhcad CIIOKES Special technical requirements for quality
Australian/New Zealand Standard (AU-AS/NZS)
- AS/NZS 3190:2009 Approval and test specification - Residual current devices (current-operated earth-leakage devices)
- AS/NZS 3190:2016(R2020) Approval and test specification — Residual current devices (current operated earth-leakage devices)
- AS/NZS 3190:2016/AMD 1:2020 Approval and test specification — Residual current devices (current operated earth-leakage devices)
- AS/NZS 3190:2011 Approval and testing specifications for residual current devices (current-operated earth-leakage devices)
- AS/NZS 3190:2016 Approval and test specification — Residual current devices (current operated earth-leakage devices)
GOSTR
- GOST R ISO 10133-2018 Small craft. Electrical system. Extra low-voltage d.c. installations
Slump,forward flow,flow pattern,forward flow,constant current constant current,First-class electrophoresis experimental device,flow path,pressure flow,open channel flow,Fluid viscosity,Runner,dynamic flow device,streaming device,flow meter,q flow,short + stream,full flow partial flow,power flow device,Flow Field Flow Separation,Constant current device