Principle of particle size analyzer

Principle of particle size analyzer, Total:60 items.

The international standard classification for "Principle of particle size analyzer" includes: Measuring instruments , Particle size analysis. sieving , Filters, seals and contamination of fluids , Equipment for petroleum and natural gas industries in general , Optics and optical measurements , Raw materials and raw glass , Geology. Meteorology. Hydrology .

The Chinese standard classification for "Principle of particle size analyzer" includes: Physical property analyzer , Sieving, Sieve Plate and Sieve Screen , Hydraulic and pneumatic device , Petroleum drilling & production equipment and instrument , Optical Measurement , Ceramic and glass in general , Meteorology .

Group Standards of the People's Republic of China

T/BSPT 003-2020 Powder Technology—Performance test method for fine particulate matter （PM2.5）mass concentration measurement instruments based on light scattering principle
T/CSP 15-2024 Particulate technology—Guide for interlaboratory comparison— Particle size detection using laser particle size analyzer
T/BSPT 003-2018 Performance test method for fine particulate matter （PM2.5 ）mass concentration measurement instruments based on light scattering principle
T/CSP 14-2024 Particulate technology—Guide for interlaboratory comparison— Particle size detection using dynamic light scattering analyzer
T/BSPT 8-2024 Particulate technology—Guide for interlaboratory comparison— Particle size detection using laser particle size analyzer

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 37163-2018 Hydraulic fluid power—Determination of the particulate contamination level of a liquid sample by automatic particle counting using the light-extinction principle
GB/T 44223-2024 Nanotechnologies—Technical requirements for dynamic light scattering particle size analyzers
GB/T 41949-2022 Particle─Laser particle size analyser─Technical requirements

National Metrological Verification Regulations of the People's Republic of China

JJG 902-1995 Partical Size Meter by Photosedimentation
JJG(机械) 7-1990 Verification rules for single particle compressive strength tester
JJG 1104-2015 Dynamic Light Scattering Particle Size Analyzers
JJG 167-2020 Laser particle size distribution analyzer

Professional Standard - Petroleum

SY/T 6542-2003 Core particle sizer

Inner Mongolia Provincial Standard of the People's Republic of China

DB15/T 1408-2018 NdFeB permanent magnet alloy powder physical properties test method laser particle size determination

National Metrological Technical Specifications of the People's Republic of China

JJF 2313-2025 Calibration Specification for Multi Parameters In-situ Laser Particle Size Analyzers
JJF(机械) 1075-2021 Calibration specification for single particle compressive strength tester
JJF 1211-2008 Calibration Specification for Static Light Scattering Particle Size Analyzers
JJF(机械)1075-2021 Calibration specifications for single particle compressive strength tester

Professional Standard - Building Materials

JC/T 650-1996 Determination method for particle size of glass raw materials
JC/T 650-2023 Method for the determination of granularity of glass raw materials

Professional Standard - Aviation

HB 8581-2020 Hydraulic fluid power- Determination of the particulate contamination level of a liquid sample by automatic particle counting using the light- extinction principle

Professional Standard - Agriculture

218药典三部-2020 Physical examination method 0982 Particle size and particle size distribution method

Professional Standard - Meteorology

QX/T 509-2019 Specifications for GRIMM 180 particle concentration monitor calibration

Hebei Provincial Standard of the People's Republic of China

DB13/T 5865-2023 Wafer surface particle size inspection instrument calibration method

German Institute for Standardization

DIN 66118:2016-10 Particle size analysis – Size analysis by air classification – Fundamentals
DIN 66165-1:1987 Particle size analysis; sieve analysis; general principles
DIN 66111:1989 Particle size analysis; sedimentation analysis; principles
DIN 66118:1984 Particle size analysis; size analysis by air classification; fundamentals
DIN 66118 E:2015-11 Particle size analysis; size analysis by air classification; fundamentals
DIN 66165-1:2016 Particle size analysis - Sieving analysis - Part 1: Fundamentals
DIN 2271-1:1976 Pneumatic Length Measurement (Air Gauging); Principles, Methods
DIN EN ISO 23131:2023-01 Ellipsometry - Principles (ISO 23131:2021); German version EN ISO 23131:2022
DIN 66165-1:2021-11 Draft Document - Particle size analysis - Sieving analysis - Part 1: Fundamentals
DIN EN ISO 23131 E:2022-08 Principle of ellipsometer (draft)
DIN 66111:1989-02 Particle size analysis; sedimentation analysis; principles
DIN EN ISO 23131:2023 Ellipsometry - Principles (ISO 23131:2021)
DIN 50989-1 E:2017-04 Ellipsometry - Part 1: Principles

British Standards Institution (BSI)

BS ISO 13320-1:1999 Particle size analysis. Laser diffraction methods-General principles
BS 3406-5:1983 Methods for determination of particle size distribution-Recommendations for electrical sensing zone method (the Coulter principle)

Association Francaise de Normalisation

NF B57-011:1973 Raw cork granules - Particle size analysis
NF EN ISO 23131:2022 Ellipsometry - Principles

COMMISSION FOR THE STANDARDS, METROLOGY AND QUALITY OF VIETNAM (STAMEQ)

TCVN 6164-1996 Principles for the establishment of hierarchy schemes for measuring instruments

Danish Standards Foundation

DANSK DS/ISO 23131:2021 Ellipsometry – Principles

Spanish Association for Standardization (UNE)

UNE 43751:1978 GLASS RAW MATERIALS. GRANULOMETRIC TEST
UNE 43751:1978 ERRATUM GLASS RAW MATERIALS. GRANULOMETRIC TEST
UNE-EN ISO 23131:2023 Ellipsometry - Principles (ISO 23131:2021)

Swedish Institute for Standards

SS-ISO 13320-1:2000 Particle size analysis - Laser diffraction methods - Part 1: General principles
SS-EN ISO 23131:2022 Ellipsometry - Principles (ISO 23131:2021)

Japanese Industrial Standards Committee (JISC)

JIS Z 8825-1:2001 Particle size analysis -- Laser diffraction methods -- Part 1: General principles

Korean Agency for Technology and Standards (KATS)

KS A ISO 13320-1-2014 Particle size analysis Laser diffraction methods - Part 1 General principles
KS A ISO 13320-1:2014 Particle size analysis Laser diffraction methods - Part 1 General principles
KS A ISO 13320-1:2004 Particle size analysis Laser diffraction methods - Part 1 General principles
KS C IEC 60231D-2012(2017) Fourth supplement：Principles of instrumentation for pressurized water reactors
KS C IEC 60231:2012 General principles of nuclear reactor instrumentation

Ente Nazionale Italiano di Unificazione

UNI EN ISO 23131:2023 Ellipsometry - Principles

Society of Automotive Engineers (SAE)

SAE AMS7025 Metal Powder Feedstock Size Classifications

Standards Norway

NS-EN ISO 23131:2022 Ellipsometry - Principles (ISO 23131:2021)

Yugoslav Association for Standardization

JUS K.F0.005-1989 Granulation of electrocorundum and silicon carbide for rigid grinding tools GRANULOMETRIC ANALYSIS MICROGRANULATION F 230 TO F 1200 USING PHOTOSEDIMENTOMETER ACCORDING TO EPENDORF

Standard Association of Australia （SAA）

AS 4863.1:2000 Particle size analysis - Laser diffraction methods - General Principles

American Society for Testing and Materials (ASTM)

ASTM C1514-08 Standard Test Method for Measurement of ²³⁵ U Fraction Using Enrichment Meter Principle