time rheometer

time rheometer, Total:110 items.

The international standard classification for "time rheometer" includes: Rubber , Radiation measurements , Laboratory medicine .

The Chinese standard classification for "time rheometer" includes: Time and Frequency Measurement , General nuclear instrument , Medical laboratory equipment , Technical management , Earth science instrument .

Professional Standard - Traffic

JT/T 838-2012 Flow time tester for fine aggregate

National Metrological Verification Regulations of the People's Republic of China

JJG 238-1995 Verification Regulation of Digital Time Interval Measuring Instrument
JJG 237-1995 Verification Regulation of Time Interval Measuring Instrument with Needle Indication
JJG 238-2018 Time Interval Meters
JJG 601-2003 Verification Regulation of Time Interval Generator
JJG 953-2000 Precision Time Interval Meter
JJG(邮电) 034-1995 Verification Regulation of Precision Time Interval Meter
JJG 601-2022 Time Calibrators
JJG 157-2020 Dynamic Shear Rheometer

Professional Standard - Education

JY/T 0369-2004 Two-dimension Space-time Tracer

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 41940-2022 Rubber—Determination of viscosity and stress relaxation using a rotorless sealed shear rheometer
GB 12129-1989 Characteristics and test methods for time-to-amplitude converters
GB/T 12129-1989 Characteristics and test methods for time-to-amplitude converters

Group Standards of the People's Republic of China

T/ZKJXX 00001-2021 Test methods of multi-channel time interval meters
T/CMA JD008-2019 Coast-down Time Testers
T/QGCML 3220-2024 Remote time-resolved Raman spectrometer
T/ZSA 111-2022 Specification for testing of multi-channel time interval meters

Henan Provincial Standard of the People's Republic of China

DB41/T 906-2014 taxi time tester

Professional Standard - Medicine

YY/T 1460-2016 Blood rheometer

Professional Standard-Ships

CB 1085.7-1989 Man-hour rated transformer for instrumentation manufacturing

National Metrological Technical Specifications of the People's Republic of China

JJF 1528-2015 Calibration Specification for Time-of-Flight Mass Spectrometers
JJF 2134-2024 Calibration Specification for Rotational Rheometers
JJF 1360-2012 Calibration Specification for Coast-down Time Testers
JJF 1400-2013 Calibration Specification for Time Relay Testers
JJF(建材) 155-2018 Calibration specification for automatic tester of Martens flow time for cement slurry
JJF(建材)155-2018 Calibration Specification for Automatic Testers of Marsh Time for Cement Paste

Professional Standard - Geology

DZ/T 0101.13-1994 Manufacture time quata for geological instrument meter - assembly
DZ 57.12-1987 Time quota printed board for geological instrumentation industry
DZ/T 0101.12-1994 Manufacture time quata for geological instrument meter - printed plate
DZ/T 0101.6-1994 Manufacture time quata for geological instrument meter - drilling machine
DZ/T 0101.3-1994 Manufacture time quata for geological instrument meter - planing machine
DZ 57.4-1987 Time quota grinding machine for geological instrumentation industry
DZ 0020.2-1991 General technical conditions for intensification-polarization instrument - time domain intensification-polarization instrument
DZ/T 0101.10-1994 Manufacture time quata for geological instrument meter - electrodeposition
DZ/T 0101.4-1994 Manufacture time quata for geological instrument meter - grinding machine
DZ/T 0101.1-1994 Manufacture time quata for geological instrument meter - truning machine
DZ 57.1-1987 Time quota lathe for geological instrumentation industry
DZ/T 0101.7-1994 Manufacture time quata for geological instrument meter - metal plate
DZ/T 0101.8-1994 Manufacture time quata for geological instrument meter - ramming
DZ/T 0101.11-1994 Manufacture time quata for geological instrument meter - painting
DZ/T 0101.5-1994 Manufacture time quata for geological instrument meter - bench worker
DZ/T 0101.2-1994 Manufacture time quata for geological instrument meter - milling machine

未注明发布机构

DIN 53019-4 E:2015-12 Rheometry - Measurement of rheological properties using rotational rheometers - Part 4: Oscillatory rheology

Professional Standard - Military and Civilian Products

WJ/Z 342-1994 Product Time Rating Photoelectric Instrument

Military Standard of the People's Republic of China-General Armament Department

GJB 3597-1999 Frequency Agility Time Test Method

IEEE - The Institute of Electrical and Electronics Engineers@ Inc.

IEEE C57.109-1985 GUIDE FOR TRANSFORMER THROUGH-FAULT-CURRENT DURATION
IEEE C57.109-1993 Guide for Liquid-Immersed Transformer Through-Fault-Current Duration
IEEE C57.12.59-2001 Guide for Dry-Type Transformer Through-Fault Current Duration
IEEE C57.12.59-1989 Guide for Dry-Type Transformer Through-Fault Current Duration
IEEE C57.12.59-2015 Guide for Dry-Type Transformer Through-Fault Current Duration
IEEE C57.12.59 ERTA-2006 Guide for Dry-Type Transformer Through-Fault Current Duration

YU-JUS

JUS G.S1.508-1997 Plastics - Determination of powder-mix time of PVC resins using a torque rheometer

International Telecommunication Union (ITU)

ITU-R QUESTION 2397-2001 Instrumentation time codes
ITU-R QUESTION 239/7-2001 Instrumentation time codes

American Society for Testing and Materials (ASTM)

ASTM D2396-94(1999)e1 Standard Test Methods for Powder-Mix Time of Poly(Vinyl Chloride) (PVC) Resins Using a Torque Rheometer
ASTM D2396-94(2012) Standard Test Methods for Powder-Mix Time of Poly(Vinyl Chloride) (PVC) Resins Using a Torque Rheometer
ASTM D2396-94(2004) Standard Test Methods for Powder-Mix Time of Poly(Vinyl Chloride) (PVC) Resins Using a Torque Rheometer
ASTM D2396-20 Standard Test Methods for Powder-Mix Time of Poly(Vinyl Chloride) (PVC) Resins Using a Torque Rheometer

ITU-R - International Telecommunication Union/ITU Radiocommunication Sector

QUESTION 239/7-2001 Instrumentation time codes

Institute of Electrical and Electronics Engineers (IEEE)

ANSI/IEEE Std C57.109-1985 IEEE Guide for Transformer Through-Fault-Current Duration
IEEE Std C57.109-1985 IEEE Guide for Transformer Through-Fault-Current Duration
IEEE Std C57.12.59/COR-2006 Errata to IEEE Guide for Dry-Type Transformer Through-Fault Current Duration
IEEE Std C57.12.59-2001 IEEE Guide for Dry-Type Transformer Through-Fault Current Duration
IEEE Std C57.12.59-2015 Guide for Dry-Type Transformer Through-Fault Current Duration
IEEE Std C57.109-2018 IEEE Guide for Liquid-Immersed Transformers Through-Fault-Current Duration
IEEE C57.109-2018 IEEE Guide for Liquid-Immersed Transformers Through-Fault-Current Duration
IEEE Std C57.12.59-1989 Guide for dry-type transformer through-fault current duration
IEEE PC57.12.59/D3, January 2015 IEEE Draft Guide for Dry-Type Transformer Through-Fault Current Duration
IEEE PC57.109/D3.0, June 2017 IEEE Draft Guide for Liquid-Immersed Transformers Through-Fault-Current Duration
IEEE PC57.109/D4.0, March 2018 IEEE Draft Guide for Liquid-Immersed Transformers Through-Fault-Current Duration
IEEE PC57.12.59/D3.1, April 2015 IEEE Approved Draft Guide for Dry-Type Transformer Through-Fault Current Duration

International Electrotechnical Commission (IEC)

IEC 60741:1982 Multichannel amplitude analyzers: Standards for time-to-amplitude converters

International Organization for Standardization (ISO)

ISO/FDIS 17514:2023 Time-measuring instruments
ISO 17514:2024 Time-measuring instruments
ISO/TR 12765:1998 Measurement of fluid flow in closed conduits - Methods using transit-time ultrasonic flowmeters
ISO/DTR 20659-2:2023 Rheological test methods — Fundamentals and interlaboratory comparisons — Part 2: Determination of the time-dependent structural change (thixotropy).
ISO/CD TR 20659-2:2023 Rheological test methods — Fundamentals and interlaboratory comparisons — Part 2: Determination of the time-dependent structural change (thixotropy).
ISO 2431:2011 Paints and varnishes - Determination of flow time by use of flow cups
ISO 2431:1972 Title missing - Legacy paper document

United States Navy

NAVY QPL-7793-QPD-2010 Meter, Time Totalizing
NAVY MIL-DTL-7793 G-2012 METER, TIME TOTALIZING
NAVY QPL-7793-2011 METER, TIME TOTALIZING
NAVY MIL-DTL-7793/11 A-2012 METER, TIME TOTALIZING, MINIATURE, DIGITAL, 20 to 130 VOLTS, DC OR AC TO 500 Hz

SCC

MIL MIL-DTL-7793H-2016 Meter, Time Totalizing
MIL MIL-DTL-7793G-2012 Meter, Time Totalizing
MIL MIL-DTL-7793/11A-2012 Meter, Time Totalizing, Digital, 20 to 130 Volts, DC or AC to 500 Hz
BS PD ISO/TR 20659-2:2024 Rheological test methods. Fundamentals and interlaboratory comparisons-Determination of the time-dependent structural change (thixotropy)
MIL MIL-M-7793/11-1982 METER, TIME TOTALIZING, DIGITAL, 20 TO 130 VOLTS, DC OR AC TO 500 HZ
DANSK DS/ISO/TR 20659-2:2024 Rheological test methods – Fundamentals and interlaboratory comparisons – Part 2: Determination of the time-dependent structural change (thixotropy)
DIN /TR 91143-2:2022 Rheological test methods - Part 2: Thixotropy - Determination of the time-dependent structural change - Fundamentals and interlaboratory test; Text in German and English
DIN SPEC 91143-2:2012 Modern rheological test methods - Part 2: Thixotropy - Determination of the time-dependent structural change - Fundamentals and interlaboratory test; Text in German and English
DIN 53019-4 E:2015 Draft Document - Rheometry - Measurement of rheological properties using rotational rheometers - Part 4: Oscillatory rheology
MIL MIL-M-7793F-1988 METER, TIME TOTALIZING (SUPERSEDING MIL-M-7793E)
MIL MIL-DTL-7793/10C-2012 Meter, Time Totalizing, Miniature, Digital, METER, 115 V. 60 Hz
MIL MIL-DTL-7793/5B-2012 Meter, Time Totalizing, Miniature, Digital, 28 VDC

US-FCR

FCR FED H-08-4 VOL 4-E-G-1-1988 TRANSFORMER SCHEDULE

American National Standards Institute （ANSI)

ANSI/IEEE C57.12.59:2002 Guide for Dry-Type Transformer Through-Fault Current Duration
ANSI/IEEE C57.109:1993 Guide for Liquid-Immersed Transformer Through-Fault Current Duration

British Standards Institution (BSI)

PD ISO/TR 20659-2:2024 Rheological test methods. Fundamentals and interlaboratory comparisons. Determination of the time-dependent structural change (thixotropy)
BS EN 60044-8:2002 Instrument transformers - Electronic current transformers

German Institute for Standardization

DIN 5483-1:1983 Time-dependent quantities; terms for the time-dependency
DIN 5483-1:1983-06 Time-dependent quantities; terms for the time-dependency
DIN 5483-3:1994-09 Time-dependent quantities - Part 3: Complex representation of sinusoidal time-dependent quantities
DIN 53019-4:2016-10 Rheometry - Measurement of rheological properties using rotational rheometers - Part 4: Oscillatory rheology
DIN 53019-4:2016 Rheometry - Measurement of rheological properties using rotational rheometers - Part 4: Oscillatory rheology

CZ-CSN

CSN 65 7082-1980 Determination of the efflux time

Association Francaise de Normalisation

NF ISO 6502-3:2023 Rubber - Measuring vulcanization characteristics using rheometers - Part 3: rotorless rheometer
NF ISO 6502-2:2018 Rubber - Measuring vulcanization characteristics using rheometers - Part 2: oscillating disk rheometer
NF C42-502:1974 Measuring instrumetns. Current transformers. Characteristics.

ZA-SANS

SANS 1795-4:2007 Road traffic law enforcement systems Part 4: Distance-over-time speed measuring equipment (variable distance/variable time)

Others: Rheometer,Rheometer use,Rheometer Procedures,Rotameter,Rheometer rotor,Rotameter,Rheometer Calibration,Torque Rheometer,Shear Rheometer,Rheometer,Dynamic Rheometer,Shear Rheometer,Dynamic Rheometer,Rheometer time,severs rheometer,time rheometer,time flow,Rheometer measurement time,Rheology time