Permeabilization time

Permeabilization time, Total:179 items.

The international standard classification for "Permeabilization time" includes: Coals , Rubber .

The Chinese standard classification for "Permeabilization time" includes: Coal analysis methods , Lubricating oil , Geological mineral survey and development in general , Rubber products in general .

National Metrological Technical Specifications of the People's Republic of China

JJF(纺织)078-2018 Calibration Specification for Acid Alkali Penetration Time Tester
JJF(纺织) 078-2018 Calibration Specification for Acid Alkali Penetration Time Tester

国家安全生产监督管理总局

MT/T 1067-2007 Method for determination of breakthrough capacity and breakthrough time of H2S adsorbed by activated carbon

Professional Standard - Coal

MT/T 997-2006 Determination of NH3 breakthrough capacity and breakthrough time of activated carbon
MT/T 1067-2008 Determination of H2S breakthrough capacity and breakthrough time of activated carbon

Professional Standard - Military and Civilian Products

WJ/Z 381-1995 Relaxed time quota for chemical defense equipment
WJ/Z 346-1994 Product time quota chemical defense equipment
WJ/Z 405-1998 Product time quota chemical defense equipment (supplementary part)

Taiwan Provincial Standard of the People's Republic of China

CNS 7260-1981 Method of Test for Gel Time of Dring Oils

Professional Standard - Petrochemical Industry

SH/T 0256-1992 Determination method for deemulsification time of lubricant

Professional Standard - Geology

DZ/T 0070-1993 Technical regulations of time domain induced polarization method

National Metrological Verification Regulations of the People's Republic of China

JJG 238-2018 Time Interval Meters

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 1684-1985 Vulcanized rubber--Testing short time static compression

Professional Standard - Chemical Industry

HG/T 3843-2008 Vulcanized rubber - Test method for short time static compression
HG/T 3843-2006 Vulcanized rubber; Testing short time static compression

Professional Standard - Agriculture

GB 6324.3-1986 Test method for oxidation time of organic chemical products potassium permanganate

Professional Standard - Nuclear Industry

EJ/T 1092-1999 Determination of gaps between uranium dioxide pellets in fuel rod by γ-ray transmission method

Professional Standard - Machinery

JB/T 9478.10-1999 Measuring methods of photocell-Rise time and fall time

IT-UNI

UNI 7927-1978 Mortar. Determination of penetration resistance shape and hardening start and end times
UNI 7123-1972 Concrete. Determination of starting and finish setting times by the measure of penetration resistance.
UNI 7377-1974 Elastomeric materials: determination of vulcanized materials, time interval between vulcanization and testing

South African Bureau of Standard

SANS 5148:2003 Paints and varnishes - Determination of through-dry state and through-dry time
SANS 9117:1990 Paints and varnishes - Determination of through-dry state and through-dry time - Method of test

Association Francaise de Normalisation

NF T30-087:1992 Paints and varnishes. Determination of through-dry state and through-dry time. Method of test.
NF T40-103:1988 Vulcanized rubber. Interval of time between vulcanization and tests.
NF T30-087-1*NF EN ISO 9117-1:2009 Paints and varnishes - Drying tests - Part 1 : determination of through-dry state and through-dry time.
NF ISO 14864:1999 Rice – Evaluation of gelatinization time when cooking grains
NF G07-171-13*NF EN ISO 9073-13:2007 Textiles - Test methods for nonwovens - Part 13 : repeated liquid strike-through time.

Spanish Association for Standardization (UNE)

UNE 48136:1962 GELIFICATION TIME
UNE 52 003 Determination of working time, standard time and time types
UNE-EN ISO 9117-1:2009 Paints and varnishes - Drying tests - Part 1: Determination of through-dry state and through-dry time (ISO 9117-1:2009)
UNE 48 136 Gel time

German Institute for Standardization

DIN 5483-1:1983 Time-dependent quantities; terms for the time-dependency
DIN 5483-1:1983-06 Time-dependent quantities; terms for the time-dependency
DIN 5483-3:1994-09 Time-dependent quantities - Part 3: Complex representation of sinusoidal time-dependent quantities
DIN 19745:2006 Soil quality - Principles of the determination of the water content by Time Domain Reflectometry (TDR) and Time Domain Transmissometry (TDT)
DIN 5483-2:1982-09 Time-dependent quantities; letter symbols
DIN EN ISO 9073-13:2007-05 Textiles - Test methods for nonwovens - Part 13: Repeated liquid strike-through time (ISO 9073-13:2006); German version EN ISO 9073-13:2007 / Note: To be replaced by DIN EN ISO 9073-13 (2022-07).
DIN EN ISO 9073-13:2022-07 Nonwovens - Test methods - Part 13: Repeated liquid strike-through time (simulated urine) (ISO/DIS 9073-13:2022); German and English version prEN ISO 9073-13:2022 / Note: Date of issue 2022-06-03*Intended as replacement for DIN EN ISO 9073-13 (2007-05).

The American Road & Transportation Builders Association

AASHTO T 197M/T 197-2023 Time of Setting of Concrete Mixtures by Penetration Resistance
AASHTO T 197M/T 197-2008 Standard Method of Test for Time of Setting of Concrete Mixtures by Penetration Resistance
AASHTO T 197M - T 197-11(R2019) Standard Method of Test for Time of Setting of Concrete Mixtures by Penetration Resistance
AASHTO T 197M/T 197-2011 Standard Method of Test for Time of Setting of Concrete Mixtures by Penetration Resistance
AASHTO CA11-4-2013 Brief 11. Commuting Departure Time and Trip Time

European Committee for Standardization (CEN)

EN 29117:1992 Paints and Varnishes - Determination of Through-Dry State and Through-Dry Time - Method of Test; (ISO 9117 : 1990)

KR-KS

KS M ISO 9117-2007 Paints and varnishes－Determination of through-dry state and through-dry time：Method of test
KS M ISO 9117-1-2017 Paints and varnishes－Drying tests－Part 1：Determination of through-dry state and through-dry time
KS M ISO 9117-1-2022 Paints and varnishes — Drying tests — Part 1: Determination of through-dry state and through-dry time
KS K ISO 9073-13-2015 Textiles — Test methods for nonwovens — Part 13: Repeated liquid strike-through time

Korean Agency for Technology and Standards (KATS)

KS M ISO 9117:2012 Paints and varnishes－Determination of through-dry state and through-dry time：Method of test
KS M ISO 9117:2007 Paints and varnishes－Determination of through-dry state and through-dry time：Method of test
KS M ISO 9117-1:2017 Paints and varnishes－Drying tests－Part 1：Determination of through-dry state and through-dry time
KS M ISO 9117-1:2022 Paints and varnishes — Drying tests — Part 1: Determination of through-dry state and through-dry time
KS F 2763-2018 Standard test method for setting times of cementitious concrete repair materials by penetration resistance
KS F 2436-2017(2022) Testing method for time of setting of concrete mixture by penetration resistance
KS F 2436-2017 Testing method for time of setting of concrete mixture by penetration resistance
KS K ISO 9073-13:2008 Textiles-Test methods for nonwovens-Part 13:Repeated liquid strike-through time
KS K ISO 9073-13:2015 Textiles — Test methods for nonwovens — Part 13: Repeated liquid strike-through time

AT-ON

ONORM EN 29117-1992 Paints and varnishes - Determination of through-dry-state and through-dry time - Method of fest

British Standards Institution (BSI)

ISO 9073-13:2022 Nonwovens. Test methods - Repeated liquid strike-through time
BS EN 12390-8:2000 Testing hardened concrete - Depth of penetration of water under pressure
BS EN ISO 9073-13:2007 Textiles - Test methods for nonwovens - Repeated liquid strike-through time
BS ISO 24617-1:2013 Language resource management. Semantic annotation framework (SemAF). Time and events (SemAF-Time, ISO-TimeML)
BS ISO 1920-14:2019 Testing of concrete - Setting time of concrete mixtures by resistance to penetration

BE-NBN

NBN T 31-025-1985 Rubber, vulcanized - Time-interval between vulcanization and testing - Specification

International Organization for Standardization (ISO)

ISO 1826:1974 Title missing - Legacy paper document
ISO 1826:1981 Rubber, vulcanized; Time-interval between vulcanization and testing; Specification
ISO 9117-1:2009 Paints and varnishes - Drying tests - Part 1: Determination of through-dry state and through-dry time
ISO 9073-13:2006 Textiles - Test methods for nonwovens - Part 13: Repeated liquid strike-through time
ISO/FDIS 9073-13 Nonwovens — Test methods — Part 13: Repeated liquid strike-through time (simulated urine)
ISO 9073-13:2023 Nonwovens — Test methods — Part 13: Repeated liquid strike-through time (simulated urine)

Danish Standards Foundation

DS/ISO 1826:1989 Rubber. Time-interval between vulcanization and testing
DS/EN ISO 9073-13:2007 Textiles - Test methods for nonwovens - Part 13: Repeated liquid strike-through time

SCC

SAE AMSP83310A-2016 Plastic Sheet, Polycarbonate, Transparent (Stabilized: Jul 2016)
BS 4724-1:1986 Resistance of clothing materials to permeation by liquids-Method for the assessment of breakthrough time
MIL MIL-DTL-81219C-2009 Indicator, Elapsed Time, Electrochemical
AENOR UNE 52003:1958 Determination of work times. Normal time and standard time.
SAE AS5447A-2024 Acceptance Criteria for Nuts - Magnetic Particle, Fluorescent Penetrant, and Visible Penetrant Examination (Stabilized: Apr 2024)
AASHTO T 197M/T 197-2005 Standard Method of Test for Time of Setting of Concrete Mixtures by Penetration Resistance
ULC 337-2004 Delayed-Action Timelocks (ULC S337)
VDI 2852 BLATT 3-2001 Characteristics of numerically controlled manufacturing equipment — positioning time, spindle acceleration time, waiting time
VDI 2852 BLATT 3-2001 Characteristics of numerically controlled manufacturing equipment — positioning time, spindle acceleration time, waiting time
DANSK DS/ISO 9073-13:2023 Nonwovens – Test methods – Part 13: Repeated liquid strike-through time (simulated urine)
AWWA JAW60863 Journal AWWA — Modeling Membrane Performance over Time
DANSK DS/EN ISO 9073-13:2007 Textiles – Test methods for nonwovens – Part 13: Repeated liquid strike-through time

RO-ASRO

STAS SR ISO 1826:1981 Vulcanized rubber. Time interval between vulcanization and testing - Specifications
STAS 3331/1-1986 TIME INTERVALS AND SCALES Main coneepts
STAS 56-1984 MINERAL OILS Dctermination of demulsification time

YU-JUS

JUS G.S0.049-1990 Rubber, vulcanized. Time-interval between vulcanization and testing. Specification
JUS U.M1.019-1981 Concrete. Time ofsetting ofconcrete mixtures by penetration resistance
JUS N.R6.038-1983 Simbols used in formulas for time dependent guantities

RU-GOST R

GOST R 54873-2011 Nonwoven fabrics and products. Methods for determination of liquid strike-through time
GOST 26798.1-1996 Oil-well cement. Test methods
GOST 26798.1-1985 Oil-well cements. Test methods of flowability, density, water-el: mination, thickening time and setting time
GOST 12068-1966 Mineral oils. Method for determination of demulsification time

Standard Association of Australia （SAA）

AS 2879.9:2002(R2013) Determination of alumina flow time
AS 2879.9:2002 Alumina - Determination of flow time

American Society for Testing and Materials (ASTM)

ASTM D1545-98 Standard Test Method for Viscosity of Transparent Liquids by Bubble Time Method
ASTM C308-00(2005) Standard Test Methods for Working, Initial Setting, and Service Strength Setting Times of Chemical-Resistant Resin Mortars
ASTM RR-C09-1052 2016 C0403_C0403M-Test Method for Time of Setting of Concrete Mixtures by Penetration Resistance
ASTM C308-00 Standard Test Methods for Working, Initial Setting, and Service Strength Setting Times of Chemical-Resistant Resin Mortars
ASTM D3732-82(2005) Standard Practice for Reporting Cure Times of Ultraviolet-Cured Coatings
ASTM C414-03(2012) Standard Test Method for Working, Setting, and Service Strength Setting Times of Chemically Setting Chemical-Resistant Silicate and Silica Mortars
ASTM D1545-76(1989)e1 Standard Test Method for Viscosity of Transparent Liquids by Bubble Time Method
ASTM C414-03 Standard Test Method for Working, Setting, and Service Strength Setting Times of Chemically Setting Chemical-Resistant Silicate and Silica Mortars
ASTM D1545-13(2017) Standard Test Method for Viscosity of Transparent Liquids by Bubble Time Method
ASTM C414-03(2008) Standard Test Method for Working, Setting, and Service Strength Setting Times of Chemically Setting Chemical-Resistant Silicate and Silica Mortars
ASTM D1545-13 Standard Test Method for Viscosity of Transparent Liquids by Bubble Time Method
ASTM D1545-07(2012) Standard Test Method for Viscosity of Transparent Liquids by Bubble Time Method
ASTM D1545-07 Standard Test Method for Viscosity of Transparent Liquids by Bubble Time Method
ASTM D1545-13(2023) Standard Test Method for Viscosity of Transparent Liquids by Bubble Time Method
ASTM D5909-96a(2011) Standard Test Method for Drying Time of Oxidative-Drying Printing Inks by Squalene Resistance
ASTM D3732-82(2001) Standard Practice for Reporting Cure Times of Ultraviolet-Cured Coatings
ASTM D3732-82(1996)e1 Standard Practice for Reporting Cure Times of Ultraviolet-Cured Coatings
ASTM D3732-82(2017) Standard Practice for Reporting Cure Times of Ultraviolet-Cured Coatings
ASTM C403/C403M-06 Standard Test Method for Time of Setting of Concrete Mixtures by Penetration Resistance
ASTM C403/C403M-16 Standard Test Method for Time of Setting of Concrete Mixtures by Penetration Resistance
ASTM C403/C403M-08 Standard Test Method for Time of Setting of Concrete Mixtures by Penetration Resistance

IN-BIS

IS 13867-1993 Rubber. Standard temperatures, humidities and times for the conditioning and time interval between vulcanization and tersting of test pieces

U.S. Military Regulations and Norms

ARMY MIL-W-53122 NOTICE 1-1998 WATER PURIFICATION UNIT REVERSE OSMOSIS, 3,000 GPH
ARMY MIL-W-52960 A-1984 WATER PURIFICATION UNIT, REVERSE OSMOSIS, 60O GPH
ARMY MIL-W-52960 A NOTICE 1-1998 WATER PURIFICATION UNIT, REVERSE OSMOSIS, 60O GPH
ARMY MIL-W-53122-1992 WATER PURIFICATION UNIT REVERSE OSMOSIS, 3,000 GPH

Military Standards (MIL-STD)

DOD A-A-51810-1987 TIMER, INTERVAL

GSO

GSO ISO 15040:2015 Composites -- Prepregs -- Determination of gel time
BH GSO ISO 9073-13:2016 Textiles -- Test methods for nonwovens -- Part 13: Repeated liquid strike-through time

Society of Motion Picture and Television Engineers (SMPTE)

SMPTE EG 40-2002 Engineering Guideline Conversion of Time Values Between SMPTE 12M Time Code, MPEG-2 PCR Time Base and Absolute Time
SMPTE EG 40-2012 Engineering Guideline Conversion of Time Values Between SMPTE 12-1 Time Code, MPEG-2 PCR Time Base and Absolute Time
SMPTE RP 159-1995 Vertical Interval Time Code and Longitudinal Time Code Relationship

Lithuanian Standards Office

LST EN ISO 9117-1:2009 Paints and varnishes - Drying tests - Part 1: Determination of through-dry state and through-dry time (ISO 9117-1:2009)

International Telecommunication Union (ITU)

ITU-R QUESTION 2387-2001 Trusted time source for time stamp authority
ITU-R QUESTION 238/7-2001 Trusted time source for time stamp authority
ITU-R QUESTION 110-2/7-1997 Time codes
ITU-R QUESTION 110-27-1997 Time codes
ITU-R VOEU 71-2 FRENCH-1993 Time Transfer Documentation Time Signal Transfer Documentation
ITU-R TF.536-2 FRENCH-2003 Time-scale notations Notations ?utiliser pour d閟igner les 閏helles de temps
ITU-R TF.583-6 FRENCH-2003 Time codes
ITU-R TF.583-6-2003 Time codes
ITU-R TF.583-6 SPANISH-2003 Time codes

IETF - Internet Engineering Task Force

RFC 3339-2002 Date and Time on the Internet: Timestamps

ITU-R - International Telecommunication Union/ITU Radiocommunication Sector

QUESTION 238/7-2001 Trusted time source for time stamp authority
ITU-R TF.583-4-1997 Time Codes
QUESTION 110-2/7-1997 Time codes
ITU-R TF.583-5-2001 Time codes
ITU-R TF.583-2-1994 Time Codes
ITU-R TF.583-3-1995 Time Codes

API - American Petroleum Institute

API 4159-1970 THE EFFECT OF CARBON MONOXIDE ON TIME PERCEPTION

TR-TSE

TS 1965-1975 RUBBERS - TIME - LAPSE BETVVEEN VULCANIZATION AND TESTING

Defense Logistics Agency

DLA MIL-I-81219 B NOTICE 1-1998 INDICATOR, ELAPSED TIME, ELECTROCHEMICAL
DLA MIL-I-81219 B-1987 INDICATOR, ELAPSED TIME, ELECTROCHEMICAL
DLA MIL-I-81219 B VALID NOTICE 2-2003 INDICATOR, ELAPSED TIME, ELECTROCHEMICAL

Japanese Industrial Standards Committee (JISC)

JIS R 2505:1981 Testing method for setting time of refractory mortars
JIS A 1147:2001 Test method for time of setting of concrete mixtures by penetration resistance
JIS A 1147:2019 Method of test for time of setting of concrete mixtures by penetration resistance
JIS A 1147:2007 Method of test for time of setting of concrete mixtures by penetration resistance

Institute of Electrical and Electronics Engineers (IEEE)

SMPTE EG 40:2002 EG 40:2002 - SMPTE Engineering Guideline - Conversion of Time Values between SMPTE 12M Time Code, MPEG-2 PCR Time Base and Absolute Time
SMPTE EG 40:2012 EG 40:2012 - SMPTE Engineering Guideline - Conversion of Time Values between SMPTE 12-1 Time Code, MPEG-2 PCR Time Base and Absolute Time
EG 40:2002 EG 40:2002 - SMPTE Engineering Guideline - Conversion of Time Values between SMPTE 12M Time Code, MPEG-2 PCR Time Base and Absolute Time
EG 40:2016 EG 40:2016 - SMPTE Engineering Guideline - Conversion of Time Values between SMPTE ST 12-1 Time Code, MPEG-2 PCR Time Base and Absolute Time
SMPTE EG 40:2016 EG 40:2016 - SMPTE Engineering Guideline - Conversion of Time Values between SMPTE ST 12-1 Time Code, MPEG-2 PCR Time Base and Absolute Time
EG 40:2012 EG 40:2012 - SMPTE Engineering Guideline - Conversion of Time Values between SMPTE 12-1 Time Code, MPEG-2 PCR Time Base and Absolute Time

ITE - Institute of Transportation Engineers

CD-032-2005 Transit Despeje Intervals

Society of Automotive Engineers (SAE)

SAE AIR5020-2004 Time-Dependent In-Flight Thrust Determination
SAE AIR4279A-2012 Heat Up Time

United States Navy

NAVY MIL-T-82535 (1)-1969 TIMER, INTERVAL, MARK 11 MOD 2 (ASSEMBLY)
NAVY MIL-T-82535 NOTICE 1-1986 TIMER, INTERVAL, MARK 11 MOD 2 (ASSEMBLY)
NAVY MIL-T-82535-1968 TIMER, INTERVAL, MARK 11 MOD 2 (ASSEMBLY)

SAE - SAE International

SAE AIR5020A-2012 Time-Dependent In-Flight Thrust Determination
SAE AIR4279-1995 Heat Up Time

Indonesia Standards

SNI ASTM C403/C403M:2012 Test method for time of setting of concrete mixtures by penetration resistance.

American National Standards Institute （ANSI)

BS EN ISO 9073-13:2023 Nonwovens. Test methods Repeated liquid strike-through time (simulated urine) (British Standard)

AASHTO - American Association of State Highway and Transportation Officials

T 197M/T 197-2008 Standard Method of Test for Time of Setting of Concrete Mixtures by Penetration Resistance
T 197M/T 197-2011 Standard Method of Test for Time of Setting of Concrete Mixtures by Penetration Resistance
T 197M/T 197-2005 Standard Method of Test for Time of Setting of Concrete Mixtures by Penetration Resistance
CA11-4-2013 Brief 11. Commuting Departure Time and Trip Time

PT-IPQ

NP EN 728-2000 Plastics piping and ducting systems Polyolefin pipes and fittings Determination of oxidation induction time

SE-SIS

SIS SS 13 72 09-1980 Concrete testing — Hardened concrete — Testing age

US-FCR

FCR FED H-08-4 VOL 3 SEC III 708-1993 PUMP SCHEDULES

CZ-CSN

CSN 67 3150 Cast.04-1975 Time of drying