flow rate

flow rate, Total:210 items.

The international standard classification for "flow rate" includes: Geology. Meteorology. Hydrology , Thermoplastic materials , Vacuum technology , Measurement of fluid flow , Plastics pipes , Measurement of volume, mass, density, viscosity , Pumps .

The Chinese standard classification for "flow rate" includes: Oceanographic instrumentation , Basic standards and general methods for synthetic resin and plastic , Hydrology and water conservancy instrument , Vacuum technique and equipment , Plastic profile , Mechanics Measurement , Nonmetal material testing machine , Pump , Flow capacity and material level instrument .

Taiwan Provincial Standard of the People's Republic of China

CNS 10909-1984 Multiple Ratio Instruments for Direct Current Use
CNS 10923-1984 Shunts and Multiple Ratio Instruments for Direct Current Use
CNS 4050-1976 Method of Measuring Velocity and Flow Rate of Stack Gas

Professional Standard - Ocean

HY/T 157-2013 Portable flowmeter

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 11826.2-2012 Current meter and flow meter—Part 2:Ultrasonic current meter
GB/T 19955.1-2005 Vapour vacuum pump—Measurement of performance characteristics—Part 1:Measurement of volume rate of flow(pumping speed)
GB/T 11826-2002 Rotating current meter
GB/T 11827-1989 Cup-type current meter
GB/T 9643-1988 Polyethylene (PE) pipes and fittings-Determination of melt flow rate
GB/T 3682-2000 Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics

Group Standards of the People's Republic of China

T/CPCIF 0148-2021 Plastics—Ultrahigh melt fluidity polypropylene materials— Determination of melt volume-flow rate（MVR）and melt mass-flow rate（MFR）
T/JSGT 002-2020 Exhaust gas ultrasonic velocity and flow meters
T/CHES 31-2019 Radio wave (radar) current meter
T/JSGT 003-2020 Exhaust gas velocity and flow monitoring Ultrasonic time difference method
T/CSTM 00031-2020 Thermoplastic elastomer - Determination of the melt mass-flow rate and melt volume-flow rate

National Metrological Verification Regulations of the People's Republic of China

JJG 031-2020 Propeller Velocimeter
JJG(水利) 001-2009 Rotating Element Current Meter
JJG 878-1994 Verification Regulation of Extrusion Plastometer
JJG 030-2020 Ultrasonic Velocimeter

工业和信息化部/国家能源局

JB/T 5456-2016 Melt flow rate meters. Technical specification

Professional Standard - Machinery

JB/T 5456-2005 Specifications for the melt flow ratemeters
JB/T 11008-2010 High speed partial emission pump
JB/T 5456-1991 Melt flow rate instrument technical conditions
JB/T 8472.1-1996 Performance measurement of vapor flow vacuum pump Part 1: Determination of pumping rate (volume flow rate)

Professional Standard - Electron

SJ 1706-1981 Measurement of electron-beam transmission efficiency of power klystrons
SJ 1718-1981 Measurement of cathode pulse current of power klystrons

Professional Standard - Water Conservancy

SL/T 186-1997 Ultrasonic current meter
SL 340-2006 Recorder for flow velocity and discharge
SL/T 232-1999 Verification method of dynamic liquid discharge and flow velocity facilities

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 3682.1-2018 Plastics—Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics—Part 1:Standard method

Henan Provincial Standard of the People's Republic of China

DB41/T 2229-2022 Procedures for flow measurement by electric wave current meter

Military Standard of the People's Republic of China-General Armament Department

GJB 204A-1992 Rated power, voltage and speed of military AC mobile power station

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 11826-2019 Rotating-element current-meters

Professional Standard - Aviation

HB 5518-1980 Rated power, voltage and speed of aircraft DC micro-drive motor

Professional Standard - Aerospace

QJ 1144-1987 Rated power, voltage and speed of AC power station for crawler launch vehicle

Professional Standard-Ships

CB*/Z 344-1985 The flow rate of the power line
CB/Z 344-1985 The flow rate of the power line

Qinghai Provincial Standard of the People's Republic of China

DB63/T 2106-2023 Regulations for Calibration of Discharge Coefficient of Flow Measurement Radar Wave Flow Measurement System

European Committee for Standardization (CEN)

CEN ISO/TS 25377:2007 Respiratory protective devices ?Human factors ?Part 1: Metabolic rates and respiratory flow rates
EN 13299:2000 Fertilizers - Determination of flow rate
EN ISO 1133-1:2022 Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method (ISO 1133-1:2022)
EN ISO 1133-1:2011 Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method (ISO 1133-1:2011)

RU-GOST R

GOST EN 13299-2016 Fertilizers. Determination of flow rate
GOST R 58140-2018 External a.c. - d.c. and a.c. - a.c. power supplies. Determination of no-load power and average efficiency of active modes
GOST 15126-1980 Water flow rate measuring instruments. Fluvial hydrometric curremt meters. General technical requirements

South African Bureau of Standard

SANS 1133:1997 Plastics - Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics

British Standards Institution (BSI)

BS EN 13299:2000 Fertilizers - Determination of flow rate
BS PD ISO/TS 16976-1:2015 Respiratory protective devices. Human factors. Metabolic rates and respiratory flow rates
BS DD ISO/TS 16976-1:2007 Respiratory protective devices - Human factors - Metabolic rates and respiratory flow rates
BS EN ISO 1133-1:2022 Plastics. Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics. Standard method
BS DD ISO/TS 24154:2006 Hydrometry - Measuring river velocity and discharge with acoustic Doppler profilers
BS ISO 16976-1:2022 Respiratory protective devices. Human factors - Metabolic rates and respiratory flow rates
PD CLC IEC/TS 60034-30-2:2021 Rotating electrical machines. Efficiency classes of variable speed AC motors (IE-code)
BS ISO 18549-2:2009 Metallic powders - Determination of apparent density and flow rate at elevated temperatures - Determination of flow rate at elevated temperatures
BS EN 50563:2011+A1:2013 External a.c. d.c. and a.c. a.c. power supplies. Determination of no-load power and average efficiency of active modes
BS DD ISO/TS 17996:2006 Cheese - Determination of rheological properties by uniaxial compression at constant displacement rate
BS EN 12157:1999 Rotodynamic pumps - Coolant pump units for machine tools - Nominal flow rate, dimensions
BS PD IEC/TS 60034-30-2:2016 Rotating electrical machines. Efficiency classes of variable speed AC motors (IE-code)
BS EN ISO 1133-2:2011 Plastics. Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics. Method for materials sensitive to time-temperature history and/or moisture

German Institute for Standardization

DIN EN 13299:2000 Fertilizers - Determination of flow rate; German version EN 13299:2000
DIN EN ISO 1133:2005 Plastics – Determination of melt mass flow rate (MFR) and melt volume flow rate (MVR) of thermoplastics
DIN EN ISO 1133-1:2022-10 Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method (ISO 1133-1:2022); German version EN ISO 1133-1:2022
DIN EN ISO 1133-1 E:2022-05 Determination of melt mass flow rate (MFR) and melt volume flow rate (MVR) of plastic thermoplastics Part 1: Standard method (draft)
DIN 41756-2:1973 Static power convertors; duty of power convertors, typers of d.c. load

International Organization for Standardization (ISO)

ISO 1133:2005 Plastics - Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
ISO 1133:1997 Plastics - Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
ISO 1133-1:2011 Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method
ISO/TS 16976-1:2007 Respiratory protective devices - Human factors - Part 1: Metabolic rates and respiratory flow rates
ISO 1133:1981 Plastics — Determination of the melt flow rate of thermoplastics
ISO/TS 15768:2000 Measurement of liquid velocity in open channels - Design, selection and use of electromagnetic current meters
ISO 748:1973 Title missing - Legacy paper document
ISO/TS 24154:2005 Hydrometry - Measuring river velocity and discharge with acoustic Doppler profilers
ISO/TR 11974:1997 Measurement of liquid flow in open channels - Electromagnetic current meters
ISO 748:1997 Measurement of liquid flow in open channels - Velocity-area methods
ISO 2537:1985 Liquid flow measurement in open channels — Cup-type and propeller-type current-meters
ISO 2537:1988 Liquid flow measurement in open channels; rotating element current-meters
ISO 2537:1974 Title missing - Legacy paper document
ISO 1133:2005/Cor 1:2006 Plastics - Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics; Technical Corrigendum 1
ISO 10780:1994 Stationary source emissions - Measurement of velocity and volume flowrate of gas streams in ducts
ISO/TS 17996:2023 | IDF/RM 205:2023 Cheese — Determination of rheological properties by uniaxial compression at constant displacement rate
ISO/TS 17996:2023 | IDF/RM 205 Cheese — Determination of rheological properties by uniaxial compression at constant displacement rate
ISO/TS 17996:2006 | IDF/RM 205:2006 Cheese — Determination of rheological properties by uniaxial compression at constant displacement rate
ISO 7194:1983 Measurement of fluid flow in closed conduits; Velocity-area methods of flow measurement in swirling or asymmetric flow conditions in circular ducts by means of current-meters or Pitot static tubes
ISO 1133:1991 Plastics; determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics

SCC

BS EN ISO 1133:2000 Plastics. Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
DANSK DS/EN ISO 1133:2005 Plastics - Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
NS-EN ISO 1133:1999 Plastics — Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics (ISO 1133:1997)
NS-EN ISO 1133:2005 Plastics — Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics (ISO 1133:2005)
DANSK DS/EN ISO 1133-1:2012 Plastics – Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics – Part 1: Standard method
DANSK DS/ISO 1133-1:2022 Plastics – Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics – Part 1: Standard method
BS 2782-7 METHOD 720A:1979 Methods of testing plastics. Rheological properties-Determination of melt flow rate of thermoplastics
MIL MIL-F-24259A-2019 FLUID FLOWMETER, VOLUME VELOCITY TYPE
NS-EN ISO 1133-1:2022 Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method (ISO 1133-1:2022)
NS-EN ISO 1133-1:2011 Plastics — Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics — Part 1: Standard method (ISO 1133-1:2011)
AENOR UNE-EN ISO 1133-1:2012 Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method (ISO 1133-1:2011)
09/30183435 DC BS EN ISO 1133-1. Plastics. Determination of the melt volume-flow rate (MVR) and melt mass-flow rate (MFR) of thermoplastics materials. Part 1. Standard method
BS PD CLC IEC/TS 60034-30-2:2021 Rotating electrical machines-Efficiency classes of variable speed AC motors (IE-code)
AATCC 200-2017 Drying Rate of Textiles at their Absorbent Capacity: Air Flow Method
MIL MIL-PRF-38120B-1997 INDICATOR, RATE OF FLOW AND TRANSFER EFU-20/A (SUPERSEDING MIL-I-38120A)
AATCC 200-2014 Drying Rate of Textiles at their Absorbent Capacity: Air Flow Method
AATCC 200-2015 Drying Rate of Textiles at their Absorbent Capacity: Air Flow Method
AATCC 200-2012 Drying Rate of Textiles at their Absorbent Capacity: Air Flow Method
DANSK DS/EN 50563/A1:2011 External a.c. - d.c. and a.c. - a.c. power supplies - Determination of no-load power and average efficiency of active modes
DANSK DS/EN 50563:2011 External a.c. - d.c. and a.c. - a.c. power supplies - Determination of no-load power and average efficiency of active modes
DIN EN ISO 1133-1 E:2010 Draft Document - Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method; (ISO/DIS 1133-1:2010); German version prEN ISO 1133-1:2010
CEI EN 50563:2013 External a.c. - d.c. and a.c. - a.c. power supplies - Determination of no-load power and average efficiency of active modes
CEI EN 50563/A1:2013 External a.c. - d.c. and a.c. - a.c. power supplies - Determination of no-load power and average efficiency of active modes
DIN EN 50563/AA E:2014 Draft Document - External a.c. - d.c. and a.c. - a.c. power supplies - Determination of no-load power and average efficiency of active modes; German version EN 50563:2011/FprAA:2013
DIN EN 50563 E:2011 Draft Document - External a.c. - d.c. and a.c. - a.c. power supplies - Determination of no-load power and average efficiency of active modes; German version FprEN 50563:2011
BS EN 61803:1999+A2:2016 Determination of power losses in high-voltage direct current (HVDC) converter stations line-commutated converters
DANSK DS/ISO/TS 17996:2007 Cheese – Determination of rheological properties by uniaxial compression at constant displacement rate
BS PD ISO/TS 17996:2023 Cheese. Determination of rheological properties by uniaxial compression at constant displacement rate

PL-PKN

PN C89069-1993 Plastics. Determination of the melt massflow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
PN M53650-1964 Hydrometers Basis of scal?

Spanish Association for Standardization (UNE)

UNE-EN ISO 1133:2006 Plastics - Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics (ISO 1133:2005)
UNE-EN ISO 1133-1:2023 Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method (ISO 1133-1:2022)
UNE-EN 50563:2012 External a.c. - d.c. and a.c. - a.c. power supplies - Determination of no-load power and average efficiency of active modes

U.S. Air Force

AIR FORCE MIL-PRF-38120 B NOTICE 1-1998 INDICATOR, RATE OF FLOW AND TRANSFER EFU-20/A
AIR FORCE MIL-PRF-38120 B-1997 INDICATOR, RATE OF FLOW AND TRANSFER EFU-20/A
AIR FORCE MIL-I-27304 E-1977 INDICATOR, RATE OF FLOW
AIR FORCE MIL-T-27305 C-1987 TRANSMITTER, RATE OF FLOW
AIR FORCE MIL-I-27304 E (3)-1991 INDICATOR, RATE OF FLOW
AIR FORCE MIL-T-27305 C NOTICE 1-1996 TRANSMITTER, RATE OF FLOW
AIR FORCE MIL-T-27305 C (2)-1995 TRANSMITTER, RATE OF FLOW
AIR FORCE MIL-I-27304 E NOTICE 1-1996 INDICATOR, RATE OF FLOW
AIR FORCE MIL-T-27305 C VALID NOTICE 2-2008 TRANSMITTER, RATE OF FLOW
AIR FORCE MIL-C-26028-1956 CALIBRATOR, ENGINE TEST CELL RATE OF FLOW MEASURING SYSTEM
AIR FORCE MIL-T-38144 D-1995 TRANSMITTER, RATE OF FLOW, FUEL
AIR FORCE MIL-I-83026 D NOTICE 1-1996 INDICATORS, RATE OF FLOW, FUEL
AIR FORCE MIL-I-38143 D VALID NOTICE 2-2008 INDICATOR, RATE OF FLOW, FUEL
AIR FORCE MIL-I-38143 D-1986 INDICATOR, RATE OF FLOW, FUEL
AIR FORCE MIL-I-38143 D NOTICE 1-1996 INDICATOR, RATE OF FLOW, FUEL
AIR FORCE MIL-I-83026 D-1990 INDICATORS, RATE OF FLOW, FUEL
AIR FORCE MIL-I-83026 D ADMIN NOTICE 2-2005 INDICATORS, RATE OF FLOW, FUEL
AIR FORCE MIL-T-38144 D VALID NOTICE 2-2008 TRANSMITTER, RATE OF FLOW, FUEL
AIR FORCE MIL-T-38144 D NOTICE 1-1996 TRANSMITTER, RATE OF FLOW, FUEL
AIR FORCE MIL-I-38143 D (1)-1992 INDICATOR, RATE OF FLOW, FUEL

NATO - North Atlantic Treaty Organization

STANAG 3872-1997 Rate of Fuel Flow Indicators (ED 2 AMD 0)
STANAG 3872-1979 Rate of Fuel Flow Indicators (ED 1 AMD 5 Amendment 5)

Japanese Industrial Standards Committee (JISC)

JIS B 7551:1992 Variable area flowmeters
JIS K 7210-1:2014 Plastics.Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics.Part 1: Standard method
JIS B 8390:2000 Pneumatic fluid power -- Components using compressible fluids -- Determination of flow-rate characteristics
JIS K 7210:1999 Plastics -- Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics

ESDU - Engineering Sciences Data Unit

ESDU 70009-1970 Inviscid supersonic flow past cones at zero incidence: (iii) flow deflection in the conical flow field.
AERO A.08.01.09 A-1981 Flow field of subsonic axisymmetric jet in a parallel stream.
ESDU 97020-1997 Slope of aerofoil lift curve for subsonic two-dimensional flow.
ESDU 70010-1970 Inviscid supersonic flow past cones at zero incidence: (iv) Mach number in the conical flow field.

Association Francaise de Normalisation

NF T51-038-1*NF EN ISO 1133-1:2012 Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1 : standard method.
NF C97-053*NF EN 50563:2013 External a.c. - d.c. and a.c. - a.c. power supplies - Determination of no-load power and average efficiency of active modes
NF EN 50563/A1:2014 External AC - DC and AC - AC Power Sources - Determination of No-Load Power and Average Active Mode Efficiency
NF EN 50563:2013 External AC - DC and AC - AC Power Sources - Determination of No-Load Power and Average Active Mode Efficiency
NF C97-053/A1*NF EN 50563/A1:2014 External a.c. - d.c. and a.c. - a.c. power supplies - Determination of no-load power and average efficiency of active modes

GSO

GSO ISO 1133-1:2015 Plastics -- Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics -- Part 1: Standard method
BH GSO ISO 1133-1:2016 Plastics -- Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics -- Part 1: Standard method
OS GSO ISO 1133-1:2015 Plastics -- Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics -- Part 1: Standard method
OS GSO ISO/TS 17996:2014 Cheese -- Determination of rheological properties by uniaxial compression at constant displacement rate

SE-SIS

SIS SS 16 11 47-1983 Plastics - Determination of the melt flow rate of thermoplastics
SIS 11 10 31-1966 Determination of flow rate of powders

Standard Association of Australia （SAA）

AS 3778.5.1:1991 Measurement of water flow in open channels - Dilution methods - Constant-rate injection method for the measurement of steady flow
AS 3706.9:2012 Geotextile Test Methods Determination of Dielectric Constant, Permeability and Flow Velocity

Korean Agency for Technology and Standards (KATS)

KS P ISO TS 16976-1:2010 Respiratory protective devices－Human factors－Part 1：Metabolic rates and respiratory flow rates
KS M 3070-1986 Testing method for melt flow rate of thermoplastics
KS M 3070-2011 Testing method for melt flow rate of thermoplastics
KS M ISO 1133-1-2022 Plastics－Determination of the melt mass-flow rate(MFR) and melt volume-flow rate(MVR) of thermoplastics－Part 1：Standard method
KS M ISO 1133-1-2012(2017) Plastics－Determination of the melt mass-flow rate(MFR) and melt volume-flow rate(MVR) of thermoplastics－Part 1：Standard method
KS M 3070-2013 Testing method for melt flow rate of thermoplastics
KS B ISO TR 11974:2005 Measurement of liquid flow in open channels－Electromagnetic current meters
KS C 4215-2006 AC geared motors
KS C 4215-2013 AC geared motors
KS B ISO 2537:2014 Liquid flow measurement in open channels-Rotating element current-meters
KS I ISO 10780:2008 Stationary source emissions-Measurement of velocity and volume flowrate of gas streams in ducts
KS B ISO 2537:2004 Liquid flow measurement in open channels-Rotating element current-meters
KS C IEC 60535:2002 Jet fans and regulators
KS B ISO TS 15768:2014 Measurement of liquid velocity in open channels — Design, selection and use of electromagnetic current meters

American National Standards Institute （ANSI)

ANSI/ASTM D3364:1999 Test Method for Flow Rates for Poly(Vinyl Chloride) and Rheologically Unstable Thermoplastics (08.03)
ANSI/AMCA 500-D-2012 Laboratory Methods of Testing Dampers for Rating

European Telecommunications Standards Institute (ETSI)

ETSI GSM 06.12-1992 Comfort Noise Aspects for Full-Rate Speech Traffic Channels

YU-JUS

JUS G.S2.601-1991 Plastics.Determaination of the melt flow rate of thermoplastic
JUS L.N1.031-1987 Pneumatic. Nominal flow rates
JUS L.N1.022-1987 Hydraulic. Nominal flow rates
JUS L.H2.020-1991 Determination of flovvrate of fluids in closed conduits of circular cross-section. Method of velocity measurement at one point of the cross-section

CEN - European Committee for Standardization

EN ISO 1133:2005 Plastics - Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
EN ISO 1133:1999 Plastics - Determination of the Melt Mass-Flow Rate (MFR) and the Melt Volume-Flow Rate (MVR) of Thermoplastics

RO-ASRO

STAS 9047-1971 PLASTICS Determination of the melt flow rate of thermoplastics

DIN

DIN EN ISO 1133-1:2022 Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method (ISO 1133-1:2022)

KR-KS

KS F 2921-2018(2023) Standard test method for airflow rate of natural ventilation system

TR-TSE

TS 2236-1976 LIQUID FLOLW MEASUREMENT ?N ?PEN CHANNELS VELOCITY - AREA METHODS
TS 3072-1978 Measurement Of Clean Water Flow In Closed Conduits - Velocity - Area Method Using Current - Meters

American Society for Testing and Materials (ASTM)

ASTM D3364-99(2004) Standard Test Method for Flow Rates for Poly(Vinyl Chloride) with Molecular Structural Implications
ASTM D3364-99 Standard Test Method for Flow Rates for Poly(Vinyl Chloride) with Molecular Structural Implications
ASTM E262-17 Standard Test Method for Determining Thermal Neutron Reaction Rates and Thermal Neutron Fluence Rates by Radioactivation Techniques

U.S. Military Regulations and Norms

ARMY MIL-STD-342-1988 FLOW CHECK, LUBRICATING OIL, PROCEDURE FOR
ARMY MIL-STD-342 VALID NOTICE 1-2004 FLOW CHECK, LUBRICATING OIL, PROCEDURE FOR

European Committee for Electrotechnical Standardization（CENELEC）

EN 50563:2011 External a.c. - d.c. and a.c. - a.c. power supplies - Determination of no-load power and average efficiency of active modes (Incorporates Amendment A1: 2013)

Lithuanian Standards Office

LST EN 50563-2012 External a.c. - d.c. and a.c. - a.c. power supplies - Determination of no-load power and average efficiency of active modes

Danish Standards Foundation

DS/EN 50563:2012 External a.c. - d.c. and a.c. - a.c. power supplies - Determination of no-load power and average efficiency of active modes

VDE - VDE Verlag GmbH@ Berlin@ Germany

VDE 0806-563-2014 External a.c. - d.c. and a.c. - a.c. power supplies - Determination of no-load power and average efficiency of active modes; German version EN 50563:2011 + A1:2013

CZ-CSN

CSN ISO 2537:1993 Liquid flow measurement in open channels. Rotating element current-meters

GM North America

GM 9985076-1983 Fluid, Automatic Transmission
GM 9985158-1982 Fluid Automatic Transmission
GM 9985026-1980 Fluid Automatic Transmission
GM 9985286-1996 Fluid, Automatic Transmission

HU-MSZT

MSZ 8506-1962 Axial fan, high speed

IETF - Internet Engineering Task Force

RFC 6051-2010 Rapid Synchronisation of RTP Flows

American Institute of Aeronautics and Astronautics (AIAA)

AIAA R-093-2003 Calibration of Subsonic and Transonic Wind Tunnels

(U.S.) Ford Automotive Standards

FORD FLTM BJ 128-01-2001 RUST PREVENTIVE (WAX-TYPE) COMPOUNDS - FLOW RATE

International Telecommunication Union (ITU)

ITU-T X.86 AMD 1 FRENCH-2002 Ethernet over LAPS Amendment 1: Using Ethernet flow control as rate limiting
ITU-T X.86 AMD 1 SPANISH-2002 Ethernet over LAPS Amendment 1: Using Ethernet flow control as rate limiting

Society of Motion Picture and Television Engineers (SMPTE)

SMPTE ST 2022-3-2010 Unidirectional Transport of Variable Bit Rate MPEG-2 Transport Streams on IP Networks

National Electrical Manufacturers Association（NEMA)

NEMA C82.1-2004 Lamp Ballasts - Line Frequency Fluorescent Lamp Ballasts

Others: flow rate,melt volume flow rate,Enthalpy flow rate,high resolution stream,flow rate g,Velocity flow