Corrosion Performance Potential

Corrosion Performance Potential, Total:81 items.

The international standard classification for "Corrosion Performance Potential" includes: Corrosion of metals , Conduits for electrical purposes , Other non-ferrous metals and their alloys , Electrical wires and cables .

The Chinese standard classification for "Corrosion Performance Potential" includes: Metal chemical property test method , Petroleum drilling , Other electric appliances , Heavy metals and their alloys analysis method , Metal nondestructive testing method , Electrotechnical material and universal parts in general .

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 37619-2019 Corrosion of metals and alloys—Potentiostatic test and evaluation method for determination of susceptibility to grooving corrosion of high frequency electric resistance welded steel pipes

Professional Standard - Aviation

HB 5454-1990 Rapid Evaluation Method for Hot Corrosion Resistance of Heat Resistant Alloys

Professional Standard - Petroleum

SY/T 5390-1991 Inspection Method for Corrosion Properties of Drilling Fluid - Drill Bar Corrosion Ring Method
SY 5390-1991 Drilling Fluid Corrosion Performance Test Method Drill Pipe Corrosion Ring Method

Taiwan Provincial Standard of the People's Republic of China

CNS 10451-1983 Method of Test for Corrosive Properties of Rust Preventive Oil
CNS 13753-2005 Corrosion of metals and alloys - Corrosivity of atmospheres - Determination of corrosion rate of standard specimens for the evaluation of corrosivity

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 37619-2019(英文版) Corrosion of metals and alloys—Potentiostatic test and evaluation method for determination of susceptibility to grooving corrosion of high frequency electric resistance welded steel pipes
GB/T 10119-1988 Copper－zinc alloys－Determination of dezincification corrosion resistance
GB/T 10119-2008 Determination of dezincification corrosion resistance of brass
GB/T 23639-2009 Energy conservation and corrosion-resistant steel-madecable support system
GB/T 17899-2023 Corrosion of metals and alloys—Method of measuring the pitting potential for stainless steels by potentiodynamic control in sodium chloride solution
GB/T 2951.27-1994 Test method for determining mechanical and physical properties of electric cables and wires. Corrosion spread test

Professional Standard - Petrochemical Industry

SH/T 0723-2002 Standard test method for evaluation of corrosiveness of diesel engine oil

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 23639-2017 Energy conservation and corrosion-resistant steel-made cable support system

Korean Agency for Technology and Standards (KATS)

KS P ISO 16429:2010 Implants for surgery－Measurements of open-circuit potential to assess corrosion behaviour of etallic implantable materials and medical devices over extended time periods
KS D 0270-2007 Test methods for critical crevice temperature and/of stainless steels
KS D 8342-2010 Corrosion of aluminium alloys－Determination of resistance to stress corrosion cracking
KS D ISO 9226:2003 Corrosion of metals and alloys－Corrosivity of atmospheres－Determination of corrosion rate of standard specimens for the evaluation of corrosivity
KS D ISO 9226-2023 Corrosion of metals and alloys－Corrosivity of atmospheres－Determination of corrosion rate of standard specimens for the evaluation of corrosivity
KS D 8334-2005 Methods of corrosion resistance test for metallic coatings
KS D ISO 9224:2015 Corrosion of metals and alloys－Corrosivity of atmospheres－Guiding values for the corrosivity categories
KS D ISO 9224:2003 Corrosion of metals and alloys-Corrosivity of atmospheres-Guiding values for the corrosivity categories
KS D ISO 9224:2020 Corrosion of metals and alloys — Corrosivity of atmospheres —Guiding values for the corrosivity categories
KS D ISO 9226:2018 Corrosion of metals and alloys－Corrosivity of atmospheres－Determination of corrosion rate of standard specimens for the evaluation of corrosivity

International Organization for Standardization (ISO)

ISO 16429:2004 Implants for surgery - Measurements of open-circuit potential to assess corrosion behaviour of metallic implantable materials and medical devices over extended time periods
ISO 17864:2005 Corrosion of metals and alloys - Determination of the critical pitting temperature under potientiostatic control
ISO/CD 9350:2023 Corrosion of Metals and Alloys — Testing method for corrosion resistance for hafnium in the hightemperature and pressure
ISO 9226:1992 Corrosion of metals and alloys; corrosivity of atmospheres; determination of corrosion rate of standard specimens for the evaluation of corrosivity

General Motors Corporation (GM)

GM 9986104-1995 Grease, Corrosion Resistant Calcium

Spanish Association for Standardization (UNE)

UNE 57101:2006 Paper and board. Determination of potential of corrosion.
UNE 83952:2008 Concrete durability. Water for mixing and aggresives waters. Determination of the pH. Potentiometric method.
UNE 112083:2010 Measurement of free corrosion potential on steel reinforced concrete structures
UNE-EN ISO 9224:2012 Corrosion of metals and alloys - Corrosivity of atmospheres - Guiding values for the corrosivity categories (ISO 9224:2012) (Endorsed by AENOR in March of 2012.)
UNE-EN 14868:2006 Protection of metallic materials against corrosion - Guidance on the assesment of corrosion likelihood in water circulation systems

Association Francaise de Normalisation

NF T60-173:1994 Temporary corrosion protection products - Evaluation of corrosion protection properties - Humid chamber method.
NF EN 2357:1989 Corrosion-resistant steel tension ends for crimping onto control cables - Dimensions and loads
NF T60-168:1994 Temporary Corrosion Protection Products - Corrosion Protection and Water Displacement Properties
NF T60-174:1994 Temporary corrosion protection products - Evaluation of corrosion protection properties - Cyclic humid chamber method
NF A05-015*NF EN ISO 20728:2018 Corrosion of metal and alloys - Determination of resistance of magnesium alloys to stress corrosion cracking
NF A05-213*NF EN ISO 9226:2012 Corrosion of metals and alloys - Corrosivity of atmospheres - Determination of corrosion rate of standard specimens for the evaluation of corrosivity

American Society for Testing and Materials (ASTM)

ASTM G192-08 Standard Test Method for Determining the Crevice Repassivation Potential of Corrosion-Resistant Alloys Using a Potentiodynamic-Galvanostatic-Potentiostatic Technique
ASTM G192-08(2014) Standard Test Method for Determining the Crevice Repassivation Potential of Corrosion-Resistant Alloys Using a Potentiodynamic-Galvanostatic-Potentiostatic Technique
ASTM G69-97(2003) Standard Test Method for Measurement of Corrosion Potentials of Aluminum Alloys
ASTM G69-97 Standard Test Method for Measurement of Corrosion Potentials of Aluminum Alloys
ASTM G69-20 Standard Test Method for Measurement of Corrosion Potentials of Aluminum Alloys

SCC

AWWA ACE59928 Comparison of Corrosive Potential by Source and Process
DIN 50929-1 E:2016 Draft Document - Corrosion of metals - Corrosion likelihood of corrosion of metallic materials when subject to corrosion from the outside - Part 1: General
NS-EN 12500:2000 Protection of metallic materials against corrosion — Corrosion likelihood in atmospheric environment — Classification, determination and estimation of corrosivity of atmospheric environments
AENOR UNE-EN 14868:2006 Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in water circulation systems
DANSK DS/EN ISO 9224:2012 Corrosion of metals and alloys - Corrosivity of atmospheres - Guiding values for the corrosivity categories
DANSK DS/EN ISO 9226:2012 Corrosion of metals and alloys - Corrosivity of atmospheres - Determination of corrosion rate of standard specimens for the evaluation of corrosivity

CZ-CSN

CSN 03 8110-1978 Testing of atmospheric corrosion resistance in functional conditiona and on atmospheric test stations
CSN 03 8203-1979 Corrosion of metals. Corrosion aggressivity of atmosphere. Classifioation
CSN ISO 9226:1994 Corrosion of metals and alloys.Corrosivity of atmospheres.Determination of corrosion rate of standard specimens for the evaluation of corrosivity

Danish Standards Foundation

DS/ISO 9591:2005 Corrosion of aluminium alloys - Determination of resistance to stress corrosion cracking
DS/EN ISO 9224:2012 Corrosion of metals and alloys - Corrosivity of atmospheres - Guiding values for the corrosivity categories

British Standards Institution (BSI)

BS EN 12501-1:2003 Protection of metallic materials against corrosion - Corrosion likelihood in soil - General
BS ISO 17864:2006 Corrosion of metals and alloys - Determination of the critical pitting temperature under potentiostatic control
BS EN ISO 20728:2018 Corrosion of metal and alloys. Determination of resistance of magnesium alloys to stress corrosion cracking

German Institute for Standardization

DIN 50929-1:2017-03 Corrosion of metals - Corrosion likelihood of metallic materials when subject to corrosion from the outside - Part 1: General
DIN 50929-1:2017 Corrosion of metals - Corrosion likelihood of corrosion of metallic materials when subject to corrosion from the outside - Part 1: General
DIN 50929-1 Corrosion of metals - Corrosion likelihood of metallic materials when subject to corrosion from the outside - Part 1: General
DIN 50929-1 E:2016-05 Corrosion of metals - Corrosion likelihood of metallic materials when subject to corrosion from the outside - Part 1: General
DIN 50905-2:1987 Corrosion of metals; corrosion testing; corrosion characteristics under uniform corrosion attack
DIN EN ISO 9224:2012-05 Corrosion of metals and alloys - Corrosivity of atmospheres - Guiding values for the corrosivity categories (ISO 9224:2012); German version EN ISO 9224:2012
DIN 50918:2018-09 Corrosion of metals - Electrochemical corrosion tests

DIN

DIN 50905-2:1986 Corrosion of metals; corrosion testing; corrosion characteristics under uniform corrosion attack

Japanese Industrial Standards Committee (JISC)

JIS G 0577:1981 Method of pitting potential measurement for stainless steels

Indonesia Standards

SNI 07-1334-1989 Well corrosion, Evaluation test method

KR-KS

KS D ISO 9226-2018(2023) Corrosion of metals and alloys－Corrosivity of atmospheres－Determination of corrosion rate of standard specimens for the evaluation of corrosivity
KS D ISO 9226-2024 Corrosion of metals and alloys－Corrosivity of atmospheres－Determination of corrosion rate of standard specimens for the evaluation of corrosivity
KS D ISO 9224-2020 Corrosion of metals and alloys — Corrosivity of atmospheres —Guiding values for the corrosivity categories
KS D ISO 9226-2018 Corrosion of metals and alloys－Corrosivity of atmospheres－Determination of corrosion rate of standard specimens for the evaluation of corrosivity

RO-ASRO

STAS SR ISO 9224:1996 Corrosion of metals and alloys. Corrosivity of atmospheres - Guiding values for corrosivity categories

Building Officials and Code Administrators International(U.S.)

BOCA CHAPTER 28 NFPC-1993 Corrosives
BOCA CHAPTER 28 NFPC COMM-1993 Corrosives

VN-TCVN

TCVN 5337-1991 Metallic corrosion.Atmosferical errosion properdes.Clasification

CEN - European Committee for Standardization

EN 12500:2000 Protection of Metallic Materials Against Corrosion - Corrosion Likelihood in Atmospheric Environment - Classification@ Determination and Estimation of Corrosivity of Atmospheric Environments

GOST

GOST ISO 9224-2022 Corrosion of metals and alloys. Corrosivity of atmospheres. Guiding values for the corrosivity categories

GSO

OS GSO ISO 9226:2015 Corrosion of metals and alloys -- Corrosivity of atmospheres -- Determination of corrosion rate of standard specimens for the evaluation of corrosivity

HU-MSZT

MSZ 18096/8-1982 Potential measurement of buildings with corrosion hazards of underground metal electrical equipment

Others: Corrosion potential,Corrosion Potential Standard Potential,corrosion performance,Corrosion potential measurement,Corrosion potential measurement,standard corrosion potential,Corrosion potential and self-corrosion potential,Corrosion Potential Corrosion Potential,Corrosion potential,Corrosion Performance Potential,Corrosion Performance Potential,Corrosion potential test,Corrosion potential test,Determination of corrosion potential,Galvanic corrosion,corrosion potential,Corrosion potential+,Galvanic corrosion,Corrosion Potential Polarization Potential