metal forming equipment

metal forming equipment, Total:227 items.

The international standard classification for "metal forming equipment" includes: Forging equipment. Presses. Shears , Plants and equipment for the food industry , Particle size analysis. sieving , Connecting devices , Substations. Surge arresters , Walls. Partitions. Facades , Powder metallurgy , Electrical wires and cables in general , Agricultural tractors and trailed vehicles , Other mining equipment , Solid fuels , Energy and heat transfer engineering in general .

The Chinese standard classification for "metal forming equipment" includes: Metal forming machinery , Sieving, Sieve Plate and Sieve Screen , Low-voltage distribution electrical equipment , Forging and pressing , High voltage switchgear , Metal and alloy powder , Cable and its accessory , Stock and poultry raising machinery and tools , Technical management , Mining machinery equipment in general , Biomass energy .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 13307-2012 Industrial pre-crimped wire square opening screens
GB 7251.1-2005 Low-voltage switchgear and controlgear assemblies Part 1:Type-tested and partially type-tested assemblies
GB/T 26487-2011 Sheet metal forming equipment—General specifications
GB/T 7251.8-2005 Low-voltage Switchgear and Controlgear Assemblies-General Technology Requirement for Intelligent Assemblies
GB/T 13307-1991 Industrial pre-crimped wire screens (square opening series)
GB/T 33211-2016 Guide line for design of metal tubular hydroforming part
GB/T 3906-2006 Alternating-current metal-enclosed switchgear and controlgear for rated voltages above 3.6 kV and up to and including 40.5 kV
GB 3906-2006 Alternating-current metal-enclosed switchgear and controlgear for rated voltages above 3.6 kV and up to and including 40.5 kV
GB 7251.1-1997 Low-voltage switchgear and controlgear assemblies-Part 1: Type-tested and partially type-tested assemblies

Group Standards of the People's Republic of China

T/HNNJ 0008-2022 Small noodle processing equipment
T/ZJL 0014-2023 Shield segment forming equipment
T/CADBM 4-2018 Metal integrated panel
T/ZJCX 0023-2022 Metal cold heading multi station intelligent forming machine
T/APSW 005-2022 Diamond Metal Mesh Forming Machine
T/TIC 059-2024 12kV environmentally friendly gas-insulated metal-enclosed switchgear
T/UNP 531-2025 Acetate sheeting equipment
T/CSEE 0357-2023 Guidelines for acoustic imaging live inspection of gas-insulated metal-enclosed switchgear
T/WHDQHX 007-2024 Environmentally-friendly gas-insulated metal-enclosed switchgear

Professional Standard - Commodity Inspection

SN/T 2876.1-2011 Technical Requirements for the Inspection of Metallurgy Industry’s Complete Set of Equipment for Import and Export - Part 1: Rollingmill Equipment
SN/T 2876.2-2013 Technical requirements for the inspection of complete set of equipment for import and export in metallurgy industry - Part 2: Metal smelting equipment
SN/T 2876.3-2014 Technical requirements for the inspection of complete set of equipment for import and export in metallurgy industry - Part 3: Metal foundry equipment

Jilin Provincial Standard of the People's Republic of China

DB22/T 467-2009 Clean Synthetic Metal Cutting Fluid

Hunan Provincial Standard of the People's Republic of China

DB43/T 861-2014 New Inorganic Non-metallic Heating Equipment Intensive Baking Room

Professional Standard - Non-ferrous Metal

YS/T 1026-2015 Tungsten heavy alloy pellets for metal injection molding

Yunnan Provincial Standard of the People's Republic of China

DB53/T 656.7-2014 Complete sets of equipment for non-ferrous metal electric lead refining system Part 7: Copper rod grinding unit
DB53/T 656.3-2014 Complete set of equipment for non-ferrous metal electric lead refining system part 3: lead flake preparation unit
DB53/T 656.4-2014 Complete set of equipment for non-ferrous metal electric lead refining system Part 4: Cathode manufacturing unit

Professional Standard - Machinery

JB/T 10130-2010 Equipment for internal farm work and husbandry-Metal grids for cattle stalls
JB/T 8838-2014 Small-sized Complete Set Equipment for Processing Wheat Flour
JB/T 10904.3-2008 Cabling machines for wires and cables—Technical requirements—Part 3:Skip type cabling machines
JB/T 10903.3-2008 Cabling machines for wires and cables—Types and sizes—Parts 3:Skip type cabling machines
JB/T 14760-2024 Small complete equipment for paddy processing
JB/T 10130-1999 Equipment for internal farm work and husbandry. Metal grids for cattle stalls
JB/T 10903.4-2008 Cabling machines for wires and cables—Types and sizes—Parts 4:Cage type cabling machines

Professional Standard - Energy

DL/T 2838-2024 Guidelines for Sonic Imaging Location Technology of Gas-Insulated Metal-Enclosed Switchgear

Professional Standard - Electron

SJ 1770-1981 Metallic bell cover for vacuum equipment--Flange
SJ 1768-1981 Metallic bell cover for vacuum equipment-Body case
SJ 1769-1981 Metallic bell cover for vacuum equipment-Sealing head
SJ/T 11566-2016 Automatically trim & forming equipment for integrated circuit (IC)
SJ 1771-1981 Metallic bell cover for vacuum equipment--Sealing collar

Taiwan Provincial Standard of the People's Republic of China

CNS 7856-1981 Calculation and Design for Helical Tension Springs Made of Round Wire or Round Bar
CNS 9966-1986 Dimensions Relating to Molds for Plastics Compression Molding Machines and Plastics Transfer Molding Machines
CNS 9965-1989 Dimensions Relating to Molds for Plastics Injection Molding Machines

Professional Standard-Safe Production

AQ/T 2075-2019 Safety testing-inspecting directory of in-service equipment and facilities for metal and nonmetal mines

Hebei Provincial Standard of the People's Republic of China

DB13/T 1538-2012 Biomass compression molding equipment
DB13/T 2807-2018 Specification for inspection and inspection of special equipment for metal and nonmetal underground mines
DB13/T 2200-2015 Welded steel wire mesh forming equipment

Professional Standard - Ferrous Metallurgy

YBJ 216-1988 Pressing sheet metal design and construction procedure

Professional Standard - Agriculture

NY/T 1882-2010 Technical conditions for densified biofuel molding equipment
NY/T 1883-2010 Testing method for densified biofuel molding equipment

Professional Standard - Energy and Power Planning

DL/T 404-2018 Alternating-current metal-enclosed switchgear and controlgear for rated voltages above 3.6 kV and up to and including 40.5 kV
DL/T 404-2007 Alternating-current metal-enclosed switchgear and controlgear for rated voltages above 3.6kV and up to and including 40.5kV

未注明发布机构

NSA 979-2013 Uniform Cutting Tests - NAS Series

Magyar Szabványügyi Testület

MNOSZ 11966-1952 Laboratory metal forming equipment
MSZ 5934-1963 Metal and steel production equipment. Fireproof bricks. Large shaped square bricks
MSZ 10425-1970 Printing Equipment. Tubular metal separation and piping equipment
MSZ 4937-1983 Extruded metal wire textiles and welded metal mesh
MSZ 31-F4-1984 Large metal cutting machinery. KGST standard for electrical equipment
MSZ 16401/2-1971 Aluminum and aluminum alloys. Grooving metal parts forming
MNOSZ 5094-1954 Large metal cutting machinery. Major equipment upgrades and
MSZ 6133-1964 Large metal cutting machinery. Precise standards for headless devices
MNOSZ 6119-1952 Metal cutting large machinery independent equipment precise standards
MNOSZ 4049-1952 Medical equipment. metal plate
MSZ 11312/1-1980 Various types of precast metal concrete and cement equipment
MNOSZ 10462-1952 Surgical equipment. Metal plumb bob
MSZ 6137-1959 Metal cutting large mechanical double column welding equipment. exact standard
MSZ 6072/9-1984 Large metal cutting machinery. Safety Technology Products Electric Power Large Machinery Equipment
MNOSZ 4048-1952 Medical equipment. metal purulent disc
MSZ 6072/6-1984 Large metal cutting machinery. Safety Technology Products Water Color Equipment
MSZ 4875/1-1983M-1988 Established small connected equipment
MNOSZ 4834-1951 Crane electrical equipment. Power metal facilities
MNOSZ 11341-1954 roadworks. Highway construction metal concrete equipment
MNOSZ 15928-1953 Formed single-layer metal concrete window size: 180x360 cm
MSZ 16050/13.lap-1969 Comprehensive detection of manganese content in metal equipment
MNOSZ 10461-1952 Surgical equipment. Metal hammer short head
MSZ 1557-1965 Installation instructions for metal electronic equipment
MSZ 16050/17-1971 Comprehensive detection of gallium content in metal equipment
MI 18100-1969 Metal surface anti-corrosion protection equipment
MSZ 16401/3-1971 Aluminum and aluminum alloys. Measuring equipment for grooving metal parts
MSZ 16050/7.lap-1969 Comprehensive inspection of metal equipment. Silver and gold content definition

US Federal Contractor Registration (USFCR)

FCR FED BLM 16116-1988 FORMED SHEET METAL RACEWAYS
FCR 40 CFR PART 471-2013 NONFERROUS METALS FORMING AND METAL POWDERS POINT SOURCE CATEGORY
FCR 40 CFR PART 471-2014 NONFERROUS METALS FORMING AND METAL POWDERS POINT SOURCE CATEGORY
FCR 40 CFR PART 471-2015 NONFERROUS METALS FORMING AND METAL POWDERS POINT SOURCE CATEGORY
FCR 40 CFR PART 464-2015 METAL MOLDING AND CASTING POINT SOURCE CATEGORY
FCR 40 CFR PART 464-2014 METAL MOLDING AND CASTING POINT SOURCE CATEGORY
FCR 40 CFR PART 464-2013 METAL MOLDING AND CASTING POINT SOURCE CATEGORY
FCR COE CWGS 16345-1993 METAL CLAD SWITCHGEAR, BUS, AND GROUNDING EQUIPMENT

German Institute for Standardization

DIN 14880:2013-12 Boxes for fire equipment - Boxes made of wood, light metal and light metal/wood
DIN 14880:2007-06 Boxes for fire equipment - Boxes made of wood, light metal and light metal/wood
DIN 24192 Supplement 1:1985 Ducting for ventilation equipment; joints for sheet metal ducting and sheet metal ducting components; examples of light joint constructions
DIN 14880:2025-07 Boxes for fire equipment - Boxes made of wood, light metal or otherwise suitable materials
DIN 1725-5:1986 Aluminium alloys, casting alloys; ingots (pigs), liquid metal; composition
DIN 3417:1998-05 Metallic slide fasteners - Design types, dimensions, materials
DIN 24150 Bb.1:1990 Ventilation equipment; joints for metal tubes and fittings; examples of type VO joints
DIN 24150 Beiblatt 1:1990 Connection method for metal pipes and fittings for ventilation equipment Type VO connection example

Polski Komitet Normalizacyjny (PKN)

PN H83504-1975 Metal foundry pattern e?uipment Dimensional tolerances
PN BN 7442-07-1965 Typesetting material Metal fonts for hand typesetting
PN BN 2251-01-1962 cover. Pipeline heat exchange equipment. Metal pipe outer diameter and composition
PN M68050-07-1991 Metalworking Machines Hammers Safety Requirements in Construction
PN M68050-06-1990 Metalworking Machines Shears Safety Requirements in Construction
PN H54119-1964 Chassis de moulage en profils plies Dispositions de jonction

Bureau of Indian Standards

IS 6652 Pt.1-1972 Glossary of terms related to metal forming machines and tools Part 1 Metal forming tools
IS 6652 Pt.2-1986 Glossary of terms related to metal forming machines and tools Part 2 Metal forming machines related to sheet metal
IS 12006-1987 Specification for equipment for metal molds and epoxy resin molds used in foundries
IS 8932-1978 Specification for preformed metal screw caps for glass containers

International Federation of Trucks and Engines

NAVISTAR TMS 7015-1994 VOID - Trim Molding, Metalized

United States Navy

NAVY UFGS-05 40 00-2010 COLD-FORMED METAL FRAMING
NAVY MIL-E-17568 C-1980 EMBROIDERY MATERIALS, METALLIC AND SYNTHETIC METALLIC
NAVY QPL-81306-10-2010 TOOL, FORMING, FOR ADJUSTABLE PLASTIC AND METAL CABLE STRAPS
NAVY QPL-81306-QPD-2011 TOOL, FORMING, FOR ADJUSTABLE PLASTIC AND METAL CABLE STRAPS

GB-REG

REG 40 CFR PART 471-2011 NONFERROUS METALS FORMING AND METAL POWDERS POINT SOURCE CATEGORY
REG 40 CFR PART 464-2011 METAL MOLDING AND CASTING POINT SOURCE CATEGORY

U.S. Environmental Protection Agency (U.S. EPA)

EPA 40 CFR PART 471-2010 NONFERROUS METALS FORMING AND METAL POWDERS POINT SOURCE CATEGORY
EPA 40 CFR PART 464-2010 METAL MOLDING AND CASTING POINT SOURCE CATEGORY

Czech Standards Institute (UNMZ)

CSN ISO 3927:1993 Metallic powders. Determination of compactibility
CSN 42 3982-1957 Low profile non-ferrous metal alloys. Bismuth 8. Tin 57. lead
CSN 42 3987-1957 Low profile non-ferrous metal alloys. Bismuth 48. Tin 14. antimony. lead
CSN 42 1408-1966 Light metal alloys for explosionproof electrical apparatus
CSN 35 7181-1978 High-voltage metal-enclosed switchgear and controlgear

Korean Agency for Technology and Standards (KATS)

KS B 6844-1998(2019) Industrial furnace of metal sintering
KS D 7015-2009 Crimped wire cloth
KS B 6844-1998(2024) Industrial furnace of metal sintering
KS C 6433-2001 FIXED METAL FILM RESISTORS FOR USE IN ELECTRONIC EQUIPMENT-FORM 05, GRADE A
KS C 6434-1995(2000) FIXED METAL FILM RESISTORS FOR USE IN ELECTRRONIC EQUIPMENT -FORM 05, GRADE B
KS C 6434-1980 FIXED METAL FILM RESISTORS FOR USE IN ELECTRRONIC EQUIPMENT -FORM 05, GRADE B
KS C 6055-2001 FIXED METAL FILM CHIP CYLINDRICAL TYPE RESISTORS FOR USE IN ELECTRONIC EQUIPMENT ( FORM 27 AND 27S, CHARACTERISTIC G, GRADE C )
KS W ISO 2032:2002 Heat-resisting equipment wires for aircraft
KS W ISO 2032:2014 Heat-resisting equipment wires for aircraft

Japanese Industrial Standards Committee (JISC)

JIS Z 8800:1991 Test sieves with electroformed sheet
JIS Z 2551:2021 Metal injection moulding materials -- Specifications
JIS C 2530:1993 Thermostat metals for electric apparatus
JIS K 5962:1993 Household paint for wood and metal
JIS K 5962:2002 Household paint for wood and metal
JIS A 5514:1977 Fittings for sanitary wares

National Standardisation Body (ASRO)

STAS 7123-1965 Monocoque cast iron cylindrical rolling equipment for profiles, wires and strips
STAS 9142-1980 Cold forming steel sections SECTIONS FOR METAL JOINERY
STAS 3208-1972 Hoisting equipmcnt WIRE ROPE SHEAVES Diameters and groove profilcs
STAS 12100/3-1988 Equipments for wellbead SEALING METALLIC RING GASKETS
STAS 7442-1990 Equipment for Chemical industry metaLLic Pecipients Temperaturcs

General Motors Corporation (GM)

GM 9984192-1997 Sealer - Preformed Patches Revision A
GM 9984195-1992 Sealer - Preformed, Floor Pan Patch [Replaced: GMNA 9984217, GMNA 9984217, GMNA 9984233, GMNA 9984233, GMNA 9985302, GMNA 9985302]
GM 9984263-2004 Metalized Finish for Lighting Applications Revision D

Standards New Zealand

NZSS GP 42-1964 METAL OFFICE EQUIPMENT

Defense Logistics Agency

DLA A-A-59484 VALID NOTICE 1-2006 BRAKE MACHINES, SHEET METAL, MANUALLY OPERATED STANDARD AND BOX-PAN TYPE
DLA A-A-51172 A-2000 FORMING MACHINE, SHEET METAL, ROTARY, MANUALLY OPERATED, BENCH MOUNTED COMBINATION TYPE
DLA A-A-51172 A VALID NOTICE 1-2006 FORMING MACHINE, SHEET METAL, ROTARY, MANUALLY OPERATED, BENCH MOUNTED COMBINATION TYPE
DLA A-A-55763-1995 RUBBER, SILICONE; NONMETALLIC, SPECIAL SHAPED SECTION 19

Finnish Standards Institute

SFS 3281-1974 Air conditioning equipment. Rectangular conveyor tube made of sheet metal
SFS 3541-1980 Air conditioning equipment. Circular conveying parts made of metal sheets. size

Association of German Mechanical Engineers

VDI 3359-2011 Blechdurchzuege - Kragenziehen
VDI 3417-2003 Documentation of sheet metal forming simulation - System requirement

The Directorate General of Specifications and Metrology (DGSM)

OS GSO ISO 22068:2016 Sintered-metal injection-moulded materials -- Specifications

GCC Standardization Organization

GSO ISO 22068:2016 Sintered-metal injection-moulded materials -- Specifications
GSO ISO 11090-2:2015 Test conditions for die sinking electro-discharge machines (die sinking EDM) -- Testing of the accuracy -- Part 2: Double-column machines (slide-head type)

Ente Nazionale Italiano di Unificazione

UNI EN ISO 22068:2014 Sintered-metal injection-moulded materials - Specifications
UNI 6771:1970 Foundry tools. Metallic matchplates with triangle references.
UNI 9480:1989 Personal protective equipment against small splashes of molten metal. Determination of the behaviour of constituent materials in contact with liquid metals

Gosstandart of Russia

GOST 12221-1979 Apparatus for plasma-arc cutting of metals. Types and basic parameters
GOST 18323-1986 Forming equipment. Terms and definitions

Institute of Electrical and Electronics Engineers (IEEE)

IEEE Std C37.20.2-2015 Metal-Clad Switchgear
IEEE C37.20.2-1999 Metal-Clad Switchgear
IEEE C37.20.2 CORR-2000 Metal-Clad Switchgear - Correction Sheet

U.S. Military Regulations and Norms

ARMY MIL-DTL-60547 G (1)-2009 PROJECTILE, 105MM, HE, M1 AND M760 METAL PARTS ASSEMBLY
ARMY MIL-S-48735 A (5)-1995 SAFE AND ARMING DEVICE FOR MINES, M718/M741 SYSTEMS METAL PARTS FOR
ARMY MIL-S-48735 A NOTICE 1-1996 SAFE AND ARMING DEVICE FOR MINES, M718/M741 SYSTEMS METAL PARTS FOR
ARMY MIL-S-48735 A-1982 SAFE AND ARMING DEVICE FOR MINES, M718/M741 SYSTEMS METAL PARTS FOR

Military Standards (MIL-STD)

MIL MIL-F-80057C-1981 FORMING MACHINES, SHEET METAL, CLEAT AND LOCK FORMING (SUPERSEDING MIL-F-80057B) (NO S/S DOCUMENT)
MIL MIL-DTL-46550D-2011 Charge, Demolition, Shaped, 40 Lb. M3A1, Metal Parts Assembly

South African Bureau of Standard

SANS 954:2004 Metal-arc welding equipment (non-automatic, single-operator, transformer type)
SANS 23297:2009 Thermoplastics hoses and hose assemblies - Wire or synthetic yarn reinforced single-pressure types for hydraulic applications - Specification

American Society for Testing and Materials (ASTM)

ASTM B883-19 Standard Specification for Metal Injection Molded (MIM) Materials
ASTM B883-15 Standard Specification for Metal Injection Molded (MIM) Materials
ASTM B883-17 Standard Specification for Metal Injection Molded (MIM) Materials
ASTM A1003/A1003M-05 Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members
ASTM B883-24 Standard Specification for Metal Injection Molded (MIM) Materials
ASTM A1003/A1003M-23e1 Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members
ASTM A1003/A1003M-13b Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members
ASTM B883-97 Standard Specification for Metal Injection Molding (MIM), Ferrous Structural Parts
ASTM D4173-82 Experimental Practice for Evaluating Lubricants in Sheet Metal Forming
ASTM A1003/A1003M-08 Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members
ASTM A1003/A1003M-02 Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members
ASTM A1003/A1003M-15 Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members
ASTM A1003/A1003M-09 Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members
ASTM A1003/A1003M-00 Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members
ASTM A1003/A1003M-14 Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members
ASTM A1003/A1003M-02a Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members
ASTM A1003/A1003M-01 Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members

Society of Automotive Engineers (SAE)

SAE ARP674A Groove Design, Metal O-Ring Gasket
SAE ARP674C Groove Design, Metal O-Ring Gasket
SAE ARP674D Groove Design, Metal O-Ring Gasket
SAE ARP674 Groove Design, Metal O-Ring Gasket
SAE ARP674B Groove Design, Metal O-Ring Gasket
SAE ARP674B-1998 Groove Design@ Metal O-Ring Gasket
SAE ARP674A-1988 Groove Design@ Metal O-Ring Gasket
SAE ARP674D-2018 Groove Design@ Metal O-Ring Gasket
SAE ARP674C-2012 Groove Design, Metal O-Ring Gasket
SAE ARP674C-2001 (R) Groove Design, Metal O-Ring Gasket
SAE AS157-1979 HOSE ASSEMBLY, NONMETALLIC-3000 PSI, TFE, FLARED, 45° TO 90°, LIGHTWEIGHT.
SAE AS156-1979 HOSE ASSEMBLY, NONMETALLIC-3000 PSI, TFE, FLARED, 45° TO 45°, LIGHTWEIGHT
SAE AS153-1979 HOSE ASSEMBLY, NONMETALLIC-3000 PSI, TFE, FLARED, STRAIGHT TO STRAIGHT, LIGHTWEIGHT
SAE AS155-1979 HOSE ASSEMBLY, NONMETALLIC-3000 PSI, TFE, FLARED, STRAIGHT TO 90°, LIGHTWEIGHT

European Committee for Standardization (CEN)

EN ISO 22068:2013 Sintered-metal injection-moulded materials - Specifications
EN ISO 22068:2014 Sintered-metal injection-moulded materials - Specifications (ISO 22068:2012)

American Welding Society (AWS)

WRC 005:1950 Part 1: How Plastic Deformation Influences Design and Forming of Metal Parts

International Electrotechnical Commission (IEC)

IEC 60298:1969 High-voltage metal-enclosed switchgear and controlgear
IEC 60116:1959 Recommendations for receiver-type metallized mica capacitors for use in electronic equipment

Spanish Association for Standardization (UNE)

UNE-EN ISO 22068:2014 Sintered-metal injection-moulded materials - Specifications (ISO 22068:2012)

Association for Electrical, Electronic & Information Technologies (VDE)

VDE 0670-6 Berichtigung 1-1999*DIN EN 60298 Berichtigung 1:1999 Metal-enclosed switchgear for rated voltages above 1kV up to and including 52kV
VDE 0670-6-1994*DIN IEC 60298:1994 A.C. metal-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV (IEC 298:1990)
VDE 0670-6 Berichtigung 2-2001*DIN EN 60298 Berichtigung 2:2001 Metal Encapsulated AC Switchgear

Association Francaise de Normalisation

NF EN ISO 22068:2014 Sintered metal materials for injection molding - Specifications
NF M81-435:1986 Sliding support for galeries. Special sections th. Specifications. Acceptance testing.
NF X11-501*NF ISO 565:1990 Test sieves. Metal wire cloth, peroforated metal plate and electroformed sheet. Nominal sizes of openings.
NF E63-507:2025 Material of moulding and extrusion - Metal mould components - Smooth rings
NF E63-517:2024 Material of moulding and extrusion - Metal mould components - Location pins
NF M82-516:1948 Mining equipment. Rectangular mesh metal screens.

American National Standards Institute （ANSI)

ANSI/NFPA 122-2010 Standard for Fire Prevention and Control in Metal/Nonmetal Mining and Metal Mineral Processing Facilities
ANSI/IEEE C37.20.2:1999 Metal-Clad and Station-Type Cubicle Switchgear

Belgian Standards Institute

NBN C 64-701 High voltage equipment under metal casing

Underwriters Laboratories (UL)

UL 852-2005 Metallic sprinkler pipe for fire protection service
UL 852-2018 Metallic sprinkler pipe for fire protection service

Instituto Colombiano de Normas Técnicas y Certificación

ICONTEC 1816-1982 Electronics. Exposed copper concentric synthetic metal wire

American Petroleum Institute (API)

API TR 2503-2024 Properties of Metals and Alloys for Use in Measurement Equipment

International Organization for Standardization (ISO)

ISO 23297:2008 Thermoplastics hoses and hose assemblies - Wire or synthetic yarn reinforced single-pressure types for hydraulic applications - Specification

COMMISSION FOR THE STANDARDS, METROLOGY AND QUALITY OF VIETNAM (STAMEQ)

TCVN 2230-2007 Test sieves.Metal wire cloth,perforated metal plate and electroformed sheet.Nominal sizes of openings

Thai Industrial Standards Institute (TISI)

TIS 1288-1995 Metal frames and panel-frames for doors and windows:cold formed steel doorsets