orifice plate original

orifice plate original, Total:171 items.

The international standard classification for "orifice plate original" includes: Equipment for processing of minerals , Particle size analysis. sieving , Agricultural machines, implements and equipment , Cement. Gypsum. Lime. Mortar .

The Chinese standard classification for "orifice plate original" includes: Sieving, Sieve Plate and Sieve Screen , Combination grippers , Moulds , Saw timber, artificial board machinery and tools , Screening equipment , Hydraulic and pneumatic device , Gypsum product .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 12620-1990 Slots with round end and slots with square end plate screens
GB/T 10061-1988 Screen plants--Codification for designating perforations
GB/T 10613-2003 Industrial plate screens—Thickness of 3 mm and above—Round and square holes
GB/T 6003.2-1997 Test sieves of perforated metal plate
GB/T 12620-2008 Round and elongated apertures with round and square plate screens
GB/T 10612-2003 Industrial plate screens - Thickness below 3 mm - Round and square holes

未注明发布机构

DIN 82024 E:2017-08 Round eye plates
DIN 24041 Perforated plates - Dimensions
DIN 24041 E:2021-03 Perforated plates - Dimensions
DIN 24041:1981 Perforated plates - Dimensions
DIN 87225 E:2018-05 Scuppers for free decks

Professional Standard - Agriculture

363药典四部-2020 9000 Guiding Principles 9602 Guiding Principles for Pharmaceutical Excipients of Animal Origin

工业和信息化部

JB/T 7252-2018 orifice throttling device
SJ/T 11660-2016 Backing plate for drilling holes in printed boards
JBT13741-2019 Orifice grille decontamination machine
JB/T 13741-2019 Orifice plate type bar screen
SJ/T 11641-2016 Entry board for printed circuit board drilling

Group Standards of the People's Republic of China

T/CPCA 4402-2010 Entry board for printed circuit board drilling
T/CPCA 4403-2010 Backup board for printed circuit board drilling
T/KSMA 001-2019 Piercing Punches of Stamping Dies for Thick Plate
T/CASME 535-2023 Cell culture microtiter plate
T/HNNMIA 60-2023 Aluminum alloy plate for printed circuit drilling cover
T/SZAS 41-2021 Performance verification of deep well plate

Professional Standard - Aviation

HB 4304-1989 Round Hole Male and Female Die Back Plates
HB 4310-1989 Rectangular Hole Back-up Board
HB 1411-1987 Large Middle Hole Back Plate
HB 1477-1987 Countersunk Drill Template
HB 4023-1988 Eccentric Hole Lower Baseplate
HB 1410-1987 Side-hole Position Plate
HB 1873-1971 Rotating platen with screw holes
HB 1291-1987 Countersunk Drill Template
HB 1555-1987 Back Plate with Middle Hole
HB 1563-1987 Large Middle Hole Position Plate
HB 1268-1987 Back Plate with Middle Hole
HB 407-1971 Mobile platen with screw holes
HB 4022-1988 Round Hole Lower Baseplate
HB 1872-1971 Mobile platen with screw holes
HB 409-1971 Rotating platen with screw holes
HB 4307-1989 Round Hole Supporting Guide Plate
HB 1471-1987 Middle Hole Position Plate
HB 4309-1989 Square Hole Back-up Board
HB 3955-1987 Side-hole Position Plate
HB 1564-1987 Large Middle Hole Back Plate
HB 3961-1987 Countersunk Drill Template

国家质量监督检验检疫总局

SN/T 4875-2017 Detection and identification of Lime witchesbroom phytoplasma

Professional Standard - Forestry

LY/T 1361-1999 Single-board Dibber

Professional Standard - Machinery

JB/T 7252-1994 Valve Type Orifice Plate Throttling Devices
JB/T 9031-1999 Perforated screen plate for ore

Professional Standard-Ships

CB/T 4366-2014 A type orifice flanges

Shanghai Provincial Standard of the People's Republic of China

DB31/T 478.26-2019 Water consumption quotas for main industrial products and their calculation methods Part 26: Raw water and tap water water treatment plant industry (raw water, tap water)

Professional Standard - Electron

SJ/Z 21087-2016 Guide for drilling processing of printed circuit boards

Taiwan Provincial Standard of the People's Republic of China

CNS 9957-1983 Perforated Aluminium Panel for Acoustic Use
CNS 4965-1998 Perforated Gypsum Boards for Acoustic Use

Professional Standard - Commodity Inspection

SN/T 4283.5-2015 Test method of microplate gene chip at frontier port-Part 5:Mycoplasma pneumonia，chlamydia pneumonia and legionella pneumophila

Professional Standard - Chemical Industry

HG/T 21529-2005 Hand hole plate flat welding flange
HG 21529-1995 Plate type flat welding flange hand hole
HG/T 21529-2005（编制说明） Plate type flat welding flange hand hole
HG/T 21529-2014 Plate flange handholes

Professional Standard - Building Materials

JC/T 803-1989 Perforated gypsum boards for acoustic use
JC/T 803-2007 Perforated gypsum board for acoustic use

CZ-CSN

CSN 01 3240-1987 Marking of centre holes
CSN 24 3231-1973 Smooth angle plates with holes in one arm
CSN 15 3330-1966 Perforated plates in test sieves
CSN 22 1300-1955 The blade plate is used for drilling, enlarging and adjusting. Overview

ESDU - Engineering Sciences Data Unit

ESDU 81039 B-1985 FLOW OF LIQUIDS Pressure losses across orifice plates@ perforated plates and thick orifice plates in ducts
ESDU 81039 C-2007 Flow of liquids. Pressure losses across orifice plates@ perforated plates and thick orifice plates in ducts.
ESDU 82009 C-1993 COMPRESSIBLE FLOW OF GASES Pressure losses across orifice plates@ perforated plates and thick orifice plates in ducts
ESDU 82009 D-2007 Compressible flow of gases. Pressure losses and discharge coefficients of orifice plates@ perforated plates and thick orifice plates in ducts.
ESDU 00002-2000 Sound power radiation from isotropic plates.

SCC

AWWA QTC98222 Source and Occurrence of Pathogens in Watersheds
BS 1669:1950 Industrial perforated plate
DIN 87225:2018 Scuppers for free decks
BS 1669:1972 Specification for industrial perforated plates
HOLDEN HN 1778-2004 Perforated PVC Sheeting - Headlining Grade
AWWA QTC98290 Application of Pathogen Surrogates to Improve Treatment Plant Performance
UNE 20621-4:1983 PRINTED BOARDS. SPECIFICATION FOR SINGLE AND DOUBLE SIDED BOARDS WITH PLAIN HOLES
NS 2636:1969 Manhole cover for recused coaming
MIL MIL-DTL-5423/7G-2009 Boot, Dust and Water Seal, Type B (for Pushbutton Switches), Style 2 (One - Hole Mounting, Drilled Panel), Style 2S (RFI-Shielded, One - Hole Mounting, Drilled Panel)

American Society of Mechanical Engineers (ASME)

ASME B16.36-2006 Orifice Flanges
ASME B16.36-1996 Orifice flanges
ASME B16.36-2020 Orifice Flanges
ASME B16.36-1979 Orifice Flanges
ASME B16.36-1988 Orifice flanges
ASME B16.36-2007 Orifice Flanges
ASME B16.36-1975 Orifice Flanges
ASME B16.36-2009 Orifice Flanges
ASME B16.36-2015 Orifice flanges

Korean Agency for Technology and Standards (KATS)

KS G 2626-2019 Steel sheet palettes for pupil
KS C 2367-1993 Rigid mica materials for punching
KS D 7082-2016 Perforated Aluminium Panel for Acoustic Use
KS D 7082-2016(2021) Perforated Aluminium Panel for Acoustic Use
KS D 7082-1991 Perforated Aluminium Panel for Acoustic Use
KS D 7082-2021 Perforated Aluminium Panel for Acoustic Use
KS A 0612-2022 Measurement of fluid flow by means of orifice plates, nozzles and Venturi tubes inserted in circular cross-section conduits running full
KS M 7611-1997 Base paper for gypsum board
KS M 7611-2007 Base paper for gypsum board
KS M 7611-2018 Base paper for gypsum board
KS W ISO 102-2016 Aircraft－Gravity filling orifices
KS M 7611-2013 Base paper for gypsum board

German Institute for Standardization

DIN 82024:2018 Round eye plates
DIN 82024:1990 Round eye plates
DIN 24041:2022-06 Perforated plates - Dimensions
DIN 24041:2021 Perforated plates - Dimensions
DIN 24041:2022 Perforated plates - Dimensions
DIN 7333:1962 Eyeletts for cardboard labels
DIN 7333:1962-01 Eyeletts for cardboard labels
DIN 24041:2002 Perforated plates - Dimensions
DIN 87225:2018-12 Scuppers for free decks
DIN 791:1967 Expanded metal
DIN 7952-2:1971-10 Sheet Metal Rim Holes with Screw Thread; Prepunch Hole Diameters
DIN 64805:1984 Double lift dobbies; cards, matrices

American National Standards Institute （ANSI)

ANSI/ASME B16.36-2009 Orifice Flanges
ANSI/ASME B16.36-2020 Orifice Flanges
ANSI/ASME MFC-14M-2003 Measurement of Fluid Flow Using Small Bore Precision Orifice Meters

ITU-R - International Telecommunication Union/ITU Radiocommunication Sector

ITU-R S.727-1-2002 Cross-polarization isolation from very small aperture terminals (VSATs)

RO-ASRO

STAS 10948-1988 PERFORATED PLATES FOR GENERAL PURPOSE
STAS 10248-1981 DECORATIVE PLYWOODS OF EXOTIC SPECIES
STAS 1624-1992 Cellular wooden plates for inner doors

British Standards Institution (BSI)

BS EN ISO 5167-2:2022 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full. Orifice plates
BS 1722-14:2017 Fences. Specification for open mesh steel panel
BS EN ISO 8307:2018 Flexible cellular polymeric materials. Determination of resilience by ball rebound

Defense Logistics Agency

DLA MIL-S-12875 B-1969 SHEET, PERFORATED, METAL
DLA MIL-S-12875 B NOTICE 1-1997 SHEET, PERFORATED, METAL

Society of Automotive Engineers (SAE)

SAE AIR6148-2023 Synthetic Jet Fuels from Non-Petroleum Feed Stocks
SAE AMS2407E-1985 Plating, Chromium, Porous

CU-NC

NC 42-10-1968 Porosity in paper and board

FI-SFS

SFS 8387-1986 In case of interpretation disputes the Finnish text applies
SFS C.5.28-1953 Uppoasennusrasian 5-aukkoinen peitelevy
SFS C.5.25-1953 Uppoasennusrasian 2-aukkoinen peitelevy
SFS C.5.27-1953 Uppoasennusrasian 4-aukkoinen peitelevy
SFS C.5.26-1953 Uppoasennusrasian 3-aukkoinen peitelevy

GSO

GSO ISO 5167-2:2008 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full- Part 2 Orifice Plates
GSO ISO 770:2015 Crude or rectified oils of Eucalyptus globulus (Eucalyptus globulus Labill.)
GSO ISO 565:2008 Test Sieves-Metal wire cloth, perforated metal plate and electroformed sheet-Nominal sizes of opening

American Society for Testing and Materials (ASTM)

ASTM E323-80(2004) Standard Specification for Perforated-Plate Sieves for Testing Purposes
ASTM E454-11 Standard Specification for Industrial Perforated Plate and Screens (Square Opening Series)
ASTM E454-12 Standard Specification for Industrial Perforated Plate and Screens (Square Opening Series)

HU-MSZT

MSZ 192-1983 porous plate sieve test
MSZ 8522-1964 Plain, hardwood, cone porin accurate

ZA-SANS

SANS 5006:1992 Pyrogenicity of pharmaceutical products (derived from BP 1988)

IT-UNI

UNI 6206-1968 Ship drainage holes. Steel Deck Drain Cover
UNI 6191-1968 Ship drainage holes. Solids for deck scuppers
UNI 6183-1968 Ship drainage holes. Covered scuppers for steel decking below strength decking
UNI 6196-1968 Ship drainage holes. Shell plating with directly connected odorless drainage holes for shelled steel decks
UNI 6197-1968 Ship drainage holes. Shell plating with angle-jointed odorless scuppers for shelled steel decks

AT-ON

ONORM B 3002 Beib.1-1992 Wood-based panels - References to coming European Standards
ONORM B 3005 Beib.1-1992 Particleboards - References to coming EuropeanStandards
ONORM B 3008 Beib.1-1992 Plywood - References to Coming European Standards

TR-TSE

TS 2852-1977 ELM LOGS FOR SLICED VENEER

Japanese Industrial Standards Committee (JISC)

JIS A 6305:1978 Perforated aluminium panel for acoustic use

IPC - Association Connecting Electronics Industries

IPC DR-572A CD-2007 Drilling Guidelines for Printed Boards

WRC - Welding Research Council

BULLETIN 80-1962 ANALYSIS OF A PERFORATED CIRCULAR PLATE CONTAINING A RECTANGULAR ARRAY OF HOLES STRESSES AND DEFLECTIONS IN LATERALLY LOADED PERFORATED PLATES
BULLETIN 52-1959 A REVIEW@ COMPARISON AND MODIFICATION OF PRESENT DEFLECTION THEORY FOR FLAT PERFORATED PLATES CORRELATION OF EXPERIMENTAL DATA WITH THEORY FOR PERFORATED PLATES WITH A TRIANGULAR HOLE ARRAY

RU-GOST R

GOST 131-2013 Grude ethyl alcohol from edible raw material. Specifications
GOST 5962-1967 Rectified ethyl alcohol. Specifications
GOST 131-1967 Grude ethyl alcohol. Specifications
GOST 5962-2013 Grude ethyl alcohol from edible raw material. Specifications

PL-PKN

PN R22011-1965 Products abtained fram the waste raw materials of animal origin Definitions

US-ACEI

IPC DR-572-1988 Drilling Guidelines for Printed Boards

International Organization for Standardization (ISO)

ISO 565:1990 Test sieves; metal wire cloth, perforated metal plate and electroformed sheet; nominal sizes of openings
ISO 7806:1983 Industrial plate screens; Codification for designating perforations

Institute of Interconnecting and Packaging Electronic Circuits (IPC)

IPC D-322-1984 Guidelines for Selecting Printed Wiring Board Sizes Using Standard Panel Sizes
IPC TM-650 2.2.18-1994 Determination of Thickness of Laminates by Mechanical Measurement