Spray Test Lab

Spray Test Lab, Total:346 items.

The international standard classification for "Spray Test Lab" includes: Surface treatment , Plant care equipment , Surface treatment and coating .

The Chinese standard classification for "Spray Test Lab" includes: Material Protection , Farming machinery and tools , Hot processing technology .

未注明发布机构

DIN EN 1395-5 E:2016-07 Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 5: Plasma spraying in chambers
SAE J2334-201604 Laboratory Cyclic Corrosion Test
DIN 32535 E:2012-05 Thermal spraying - Tubular coating tensile test
DIN EN 17393 E:2019-07 Thermal spraying - Tubular coating tensile test
DIN EN 15458 E:2014-02 Paints and varnishes - Laboratory method for testing the efficacy of film preservatives in a coating against algae
DIN EN ISO 14918 E:2017-03 Thermal Spray Qualification Testing for Thermal Spray Personnel (Draft)
DIN EN 15457 E:2014-02 Paints and varnishes - Laboratory method for testing the efficacy of film preservatives in a coating against fungi

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 37421-2019 Thermal spraying—Characterization and testing of thermally sprayed coatings

Professional Standard - Civil Aviation

MH/T 1051-2012 Methods for the measurement of spray drift in wind tunnel laboratory
MH/T 3027-2013 Test method for adhesion or cohesion strength of thermal spray coatings

Military Standard of the People's Republic of China-General Armament Department

GJB 2725-1996 General requirements for calibration laboratories and testing laboratories
GJB 2725A-2001 General requirements for testing laboratories and calibration laboratories

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 32241-2015 Equipment for crop protection―Methods for the laboratory measurement of spray drift―Wind tunnels
GB/T 20019-2005 Thermal spraying. Acceptance inspection of thermal spraying equipment

Professional Standard - Aviation

HB 5474-1991 Method of Shear Strength Test for Heat Spray Coating Layer
HB 5476-1991 Method of Bonding Strength Test for Heat Spray Coating Layer
HB 7751-2004 Testing method for the bonding strength for the coating made by detonation-gun spraying
HB 5486-1991 Method of Hardness Test for Heat Spray Coating Layer
HB 5475-1991 Method of Tensile Strength Test for Heat Spray Coating Layer

Group Standards of the People's Republic of China

T/LAIA 01-2024 Green Testing Laboratory Evaluation of Chemical Testing Laboratory
T/CSAE 104-2019 Laboratory xenon arc exposure test method of automotive exterior decoration coatings

Professional Standard - Machinery

JB/T 7509-1994 Test method for porosity of thermal spray coatings Iron reagent method
JB/T 6070-1992 Test method for thermal spray self-fluxing alloy coating

Taiwan Provincial Standard of the People's Republic of China

CNS 13123-1992 General Requirements for The Acceptance of Testing Laboratories
CNS 15009-2006 Proficiency testing by interlaboratory comparisons

American Society for Testing and Materials (ASTM)

ASTM D5009-02(2023) Standard Test Method for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under Laboratory Conditions
ASTM D5009-02(2017) Standard Test Method for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under Laboratory Conditions
ASTM D5009-02(2011) Standard Test Method for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under Laboratory Conditions
ASTM D5009-96(2002) Standard Test Method for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under Laboratory Conditions
ASTM D5009-96 Standard Test Method for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under Laboratory Conditions
ASTM D5009-02 Standard Test Method for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under Laboratory Conditions
ASTM D5009-02(2005) Standard Test Method for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under Laboratory Conditions
ASTM D5327-97 Standard Practice for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under General Laboratory Conditions
ASTM D5327-97(2021)e1 Standard Practice for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under General Laboratory Conditions
ASTM E2109-01(2007) Test Methods for Determining Area Percentage Porosity in Thermal Sprayed Coatings
ASTM E2109-01 Test Methods for Determining Area Percentage Porosity in Thermal Sprayed Coatings
ASTM E2109-00 Test Methods for Determining Area Percentage Porosity in Thermal Sprayed Coatings
ASTM D6899-03 Standard Guide for Laboratory Cyclic Corrosion Testing of Automotive Painted Steel
ASTM D5852-00(2007) Standard Test Method for Erodibility Determination of Soil in the Field or in the Laboratory by the Jet Index Method
ASTM D4707-97(2003)e1 Standard Test Method for Measuring Paint Spatter Resistance During Roller Application
ASTM D5852-00 Standard Test Method for Erodibility Determination of Soil in the Field or in the Laboratory by the Jet Index Method
ASTM D5852-95 Standard Test Method for Erodibility Determination of Soil in the Field or in the Laboratory by the Jet Index Method
ASTM D5852-00(2007)e1 Standard Test Method for Erodibility Determination of Soil in the Field or in the Laboratory by the Jet Index Method
ASTM D5179-16(2021) Standard Test Method for Measuring Adhesion of Organic Coatings in the Laboratory by Direct Tensile Method
ASTM D1006-93 Standard Practice for Conducting Exterior Exposure Tests of Paints on Wood
ASTM D1006-01 Standard Practice for Conducting Exterior Exposure Tests of Paints on Wood
ASTM D7539-10 Standard Practice for Using a Test Chamber for Humidity Conditioning of Test Panels of Pavement Marking Paints

British Standards Institution (BSI)

BS EN 1395-5:2007 Thermal spraying - Acceptance inspection of thermal spraying equipment - Plasma spraying in chambers
BS EN 1395-5:2018 Thermal spraying. Acceptance inspection of thermal spraying equipment. Plasma spraying in chambers
BS EN ISO 14918:1998 Thermal spraying - Approval testing of thermal sprayers
BS EN ISO 14918:2018 Thermal spraying. Qualification testing of thermal sprayers
BS EN 1395-3:2007 Thermal spraying - Acceptance inspection of thermal spraying equipment - Arc spraying
BS EN 17393:2020 Thermal spraying. Tubular coating tensile test
BS EN 1395-4:2007 Thermal spraying - Acceptance inspection of thermal spraying equipment - Plasma spraying
BS EN 12981:2005 Coating plants - Spray booths for application of organic powder coating material - Safety requirements
BS EN 13020:2004 Road surface treatment machines-Safety requirements
BS EN 13032-2:2004 Light and lighting — Measurement and presentation of photometric data of lamps and luminaires — Part 2: Presentation of data for indoor and outdoor work places
BS EN 1395:1996 Thermal spraying - Acceptance inspection of thermal spraying equipment
BS ISO 22856:2008 Equipment for crop protection - Methods for the laboratory measurement of spray drift - Wind tunnels
BS ISO 22856:2009 Equipment for crop protection. Methods for the laboratory measurement of spray drift. Wind tunnels
BS EN 1395-2:2007 Thermal spraying - Acceptance inspection of thermal spraying equipment - Flame spraying including HVOF
BS EN 15457:2007 Paints and varnishes - Laboratory method for testing the efficacy of film preservatives in a coating against fungi
BS ISO 5682-4:2021 Equipment for crop protection. Spraying equipment - Test methods for agitation of sprayer tanks
BS EN 15457:2014 Paints and varnishes. Laboratory method for testing the efficacy of film preservatives in a coating against fungi
BS EN 15458:2007 Paints and varnishes - Laboratory method for testing the efficacy of film preservatives in a coating against algae
BS EN 15458:2008 Paints and varnishes. Laboratory method for testing the efficacy of film preservatives in a coating against algae
BS EN 15457:2008 Paints and varnishes. Laboratory method for testing the efficacy of film preservatives in a coating against fungi
BS EN 15458:2014 Paints and varnishes. Laboratory method for testing the efficacy of film preservatives in a coating against algae
DD ENV 13050-2001 Curtain walling. Watertightness. Laboratory test under dynamic condition of air pressure and water spray
19/30392949 DC BS EN 17393. Thermal spraying. Tubular coating tensile test
BS EN ISO 20566:2021 Paints and varnishes. Determination of the scratch resistance of a coating system using a laboratory-scale car-wash
BS EN ISO 15195:2003 Laboratory medicine - Requirements for reference measurement laboratories
BS 6460-1:1983 Accreditation of testing laboratories - Specification of the general requirements for the technical competence of testing laboratories
BS EN ISO 20566:2013 Paints and varnishes. Determination of the scratch resistance of a coating system using a laboratory-scale car-wash
BS EN 1395-1:2007 Thermal spraying - Acceptance inspection of thermal spraying equipment - General requirements
BS EN 1395-6:2007 Thermal spraying - Acceptance inspection of thermal spraying equipment - Manipulator systems
BS EN 582:1994 Thermal spraying - Determination of tensile adhesive strength
BS EN ISO 14916:2017 Thermal spraying. Determination of tensile adhesive strength

German Institute for Standardization

DIN EN 1395-5:2018-10 Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 5: Plasma spraying in chambers; German version EN 1395-5:2018
DIN EN 1395-5:2018 Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 5: Plasma spraying in chambers
DIN EN ISO 14918:1999 Thermal spraying - Approval testing of thermal sprayers (ISO 14918:1998); German version EN ISO 14918:1998
DIN 30665-1:1982 Gas-appliances; gas-burners for laboratory use (laboratory burners)
DIN EN 1395-5:2007 Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 5: Plasma spraying in chambers English version of EN 1395-5:2007-04
DIN EN ISO 14918:2018-09 Thermal spraying - Qualification testing of thermal sprayers (ISO 14918:2018); German version EN ISO 14918:2018
DIN EN ISO 14923:2003-10 Thermal spraying - Characterization and testing of thermally sprayed coatings (ISO 14923:2003); German version EN ISO 14923:2003
DIN EN 13050:2011-09 Curtain Walling - Watertightness - Laboratory test under dynamic condition of air pressure and water spray; German version EN 13050:2011
DIN EN 6081:2020-09 Thermal spraying - Tubular coating tensile test; German version EN 17393:2020
DIN EN 17393:2020 Thermal spraying - Tubular coating tensile test
DIN EN 6101:2020-09 Thermal spraying - Tubular coating tensile test; German version EN 17393:2020
DIN EN 17393:2020-09 Thermal spraying - Tubular coating tensile test; German version EN 17393:2020
DIN EN 6080:2020-09 Thermal spraying - Tubular coating tensile test; German version EN 17393:2020
DIN 32535:2013 Thermal spraying - Tubular coating tensile test
DIN EN 1395-3:2007-04 Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 3: Arc spraying; German version EN 1395-3:2007
DIN EN 1395-4:2007-04 Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 4: Plasma spraying; German version EN 1395-4:2007
DIN EN 15458:2007 Paints and varnishes - Laboratory method for testing the efficacy of film preservatives in a coating against algae; English version of DIN EN 15458:2007-10
DIN EN 15457:2007 Paints and varnishes - Laboratory method for testing the efficacy of film preservatives in a coating against fungi; German version EN 15457:2007
DIN EN ISO 20566:2007 Paints and varnishes - Determination of the scratch resistance of a coating system using a laboratory car-wash (ISO 20566:2005); English version of DIN EN ISO 20566:2006-01
DIN EN ISO 15195:2004 Laboratory medicine - Requirements for reference measurement laboratories (ISO 15195:2003); German version EN ISO 15195:2003
DIN EN 1395-2:2007-04 Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 2: Flame spraying including HVOF; German version EN 1395-2:2007

SCC

NS-EN 1395-5:2018 Thermal spraying — Acceptance inspection of thermal spraying equipment — Part 5: Plasma spraying in chambers
NS-EN 1395-5:2007 Thermal spraying — Acceptance inspection of thermal spraying equipment — Part 5: Plasma spraying in chambers
AMCA 250-12 Laboratory Methods of Testing Jet Tunnel Fans for Performance
DIN V ENV 13050:2001 Curtain walling - Watertightness - Laboratory test under dynamic air pressure and water spray; German version ENV 13050:2000
05/30133127 DC EN 1395-5. Thermal spraying. Acceptance inspection of thermal spraying equipment. Part 5. Plasma spraying in chambers
AENOR UNE-EN 1395-5:2008 Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 5: Plasma spraying in chambers
DANSK DS/EN 1395-5:2018 Thermal spraying – Acceptance inspection of thermal spraying equipment – Part 5: Plasma spraying in chambers
DIN EN 1395-5 E:2016 Draft Document - Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 5: Plasma spraying in chambers; German and English version prEN 1395-5:2016
DIN 12898:2019 Laboratory taps - Outlet nozzles
DANSK DS/EN ISO 14923:2003 Thermal spraying - Characterization and testing of thermally sprayed coatings
BS 3898:1965 Specification for laboratory humidity ovens (injection type)
AENOR UNE-EN 13050:2011 Curtain Walling - Watertightness - Laboratory test under dynamic condition of air pressure and water spray
UNE-ENV 13050:2001 Curtain Walling - Watertightness - Laboratory test under dynamic condition of air pressure and water spray
DANSK DS/EN 13050:2011 Curtain Walling - Watertightness - Laboratory test under dynamic condition of air pressure and water spray
06/30141610 DC ISO 20612. Water quality. Interlaboratory comparisons for proficiency testing of analytical testing laboratories
DIN 12898 E:2018 Draft Document - Laboratory taps - Outlet nozzles
MIL MIL-R-37640-1977 RACK, TEST TUBE, LABORATORY, EPOXY COATED WIRE, 40 TUBE
AENOR UNE-EN ISO 14923:2004 Thermal spraying - Characterization and testing of thermally sprayed coatings (ISO 14923:2003)
NS-EN 17393:2020 Thermal spraying — Tubular coating tensile test
NS-EN ISO 14923:2003 Thermal spraying - Characterization and testing of thermally sprayed coatings (ISO 14923:2003)
DANSK DS/EN ISO 14918:2018 Thermal spraying – Qualification testing of thermal sprayers (ISO 14918:2018)
DANSK DS/EN 14727:2006 Laboratory furniture - Storage units for laboratories - Requirements and test methods
NS-EN ISO 14918:1998 Thermal spraying — Approval testing of thermal sprayers (ISO 14918:1998)
NS-EN ISO 14918:2018 Thermal spraying - Qualification testing of thermal sprayers (ISO 14918:2018)
AENOR UNE-EN ISO 14918:2019 Thermal spraying - Qualification testing of thermal sprayers (ISO 14918:2018)
NS-EN 14727:2005 Laboratory furniture - Storage units for laboratories - Requirements and test methods
DIN EN 13050 E:2011 Draft Document - Curtain walling - Watertightness - Laboratory test under dynamic condition of air pressure and water spray; German version FprEN 13050:2010
NS-EN 13050:2011 Curtain Walling — Watertightness — Laboratory test under dynamic condition of air pressure and water spray
NS-EN 1395:1996 Thermal spraying — Acceptance inspection of thermal spraying equipment
AENOR UNE-EN 1395-4:2008 Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 4: Plasma spraying
DANSK DS/EN 17393:2020 Thermal spraying – Tubular coating tensile test
DANSK DS/EN 1395-3:2007 Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 3: Arc spraying
DIN EN 17393 E:2019 Draft Document - Thermal spraying - Tubular coating tensile test; German and English version prEN 17393:2019
UNE-EN 1395:1996 THERMAL SPRAYING. ACCEPTANCE INSPECTION OF THERMAL SPRAYING EQUIPMENT.
AENOR UNE-EN 1395-3:2008 Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 3: Arc spraying
NS-EN 1395-3:2007 Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 3: Arc spraying
NS-EN 1395-4:2007 Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 4: Plasma spraying
AENOR UNE-EN 14727:2006 Laboratory furniture. Container furniture for laboratories. Requirements and test methods.
DANSK DS/EN 1395-4:2007 Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 4: Plasma spraying
ASTM Adjunct E691-01 Program to Compute the Within-Lab and Between-Lab Variation of a Test Method from an Interlaboratory Round Robin Study
DIN EN ISO 14918 E:2017 Draft Document - Thermal spraying - Qualification testing of thermal sprayers (ISO/DIS 14918:2017); German and English version prEN ISO 14918:2017
05/30133121 DC EN 1395-3. Thermal spraying. Acceptance inspection of thermal spraying equipment. Part 3. Arc spraying
SPC GB/T 37421-2019 Thermal spraying -- Characterization and testing of thermally sprayed coatings (TEXT OF DOCUMENT IS IN CHINESE)
DANSK DS/ISO 22856:2008 Equipment for crop protection - Methods for the laboratory measurement of spray drift - Wind tunnels
VDI 4221 BLATT 2-2017 Quality assurance — Requirements for interlaboratory tests in the field of emission control — Development, implementation and evaluation of interlaboratory tests for emission measurement methods under laboratory conditions
05/30133124 DC EN 1395-4. Thermal spraying. Acceptance inspection of thermal spraying equipment. Part 4. Plasma spraying
AMCA 520-09 Laboratory Methods for Testing Actuators
AATCC M10-2018 A Summary of ASTM Methods for Interlaboratory Testing
NS 8011:1982 Geotechnical testing - Laboratory methods - Density
06/30144884 DC EN 13050. Curtain walling. Watertightness. Laboratory test under dynamic condition of air pressure and water spray
NS-EN 12215:2004+A1:2009 Coating plants — Spray booths for application of organic liquid coating materials — Safety requirements
AATCC M9-1992 A Summary of ASTM Methods for Interlaboratory Testing
DIN 32535 E:2012 Draft Document - Thermal spraying - Tubular coating tensil test
NS-EN 12981:2005 Coating plants — Spray booths for application of organic powder coating material — Safety requirements
NS-EN 12981:2005+A1:2009 Coating plants — Spray booths for application of organic powder coating material — Safety requirements
VDI 4221 BLATT 2-2017 Quality assurance — Requirements for interlaboratory tests in the field of emission control — Development, implementation and evaluation of interlaboratory tests for emission measurement methods under laboratory conditions
BS DD 156:1987 Method of test for bond strength of sprayed mineral coatings
05/30133118 DC EN 1395-2. Thermal spraying. Acceptance inspection of thermal spraying equipment. Part 2. Flame spraying including HVOF

Association Francaise de Normalisation

NF A91-226-5:2007 Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 5 : plasma spraying in chambers.
NF A91-226-5*NF EN 1395-5:2018 Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 5 : plasma spraying in chambers
NF A91-221:1998 Thermal spraying. Approval testing of thermal sprayers.
NF EN ISO 14923:2003 Projection thermique - Caractérisation et essais des revêtements obtenus par projection thermique
NF A91-221*NF EN ISO 14918:2018 Thermal spraying - Qualification testing of thermal sprayers
NF EN 17393:2020 Thermal projection - Tensile test
NF A09-612*NF EN 17393:2020 Thermal spraying - Tubular coating tensile test
NF A91-212:1996 Thermal spraying. Acceptance inspection of thermal spraying equipment.
NF T35-011/IN1:2009 Coating plants - Spray booths for application of organic powder coating material - Safety requirements.
NF T35-011:2005 Coating plants - Spray booths for application of organic powder coating material - Safety requirements.
NF A91-226-3*NF EN 1395-3:2007 Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 3 : arc spraying
NF A91-226-4*NF EN 1395-4:2007 Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 4 : plasma spraying
NF T30-116:2014 Paints and varnishes - Laboratory method for testing the efficacy of film preservatives in a coating against algae
NF T30-600:1977 Paints. Paint coatings for indoor use. Methods for preparing the different types of coating to be subjected to laboratory tests.
NF T30-115:2014 Paints and varnishes - Laboratory method for testing the efficacy of film preservatives in a coating against fungi
NF EN 16985:2018 Spray application booths for organic coating products - Safety requirements
NF EN 15458:2022 Paints and varnishes - Laboratory test method for verifying the effectiveness of coating film preservatives against algae
NF A91-220*NF EN ISO 14923:2003 Thermal spraying - Characterization and testing of thermally sprayed coatings
NF A91-226-2*NF EN 1395-2:2007 Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 2 : flame spraying including HVOF.
NF P94-072:1995 Sols : reconnaissance et essais - Essai scissométrique en laboratoire
NF EN 1395-3:2007 Thermal spraying - Acceptance check of thermal spraying equipment - Part 3: arc spraying
NF S92-062:2004 Laboratory medicine - Requirements for reference measurement laboratories.
A05-300:1987 Physical-chemical tests. Recommendations for laboratory testing. Corrosion resistance of metals, alloys and metallic coatings.
NF X15-202:2006 Laboratory furniture - Storage units for laboratories - Requirements and test methods.
NF T30-902:2013 Paints and varnishes - Determination of the scratch resistance of a coating system using a laboratory car-wash
NF EN 15457:2022 Paints and varnishes - Laboratory test method for determining the effectiveness of coating film preservatives against fungi

Danish Standards Foundation

DS/EN 1395-5:2007 Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 5: Plasma spraying in chambers
DS/EN ISO 14923:2003 Thermal spraying - Characterization and testing of thermally sprayed coatings
DS/EN ISO 14918:1999 Thermal spraying - Approval testing of thermal sprayers
DS/EN 1395-3:2007 Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 3: Arc spraying
DS/EN 14727:2006 Laboratory furniture - Storage units for laboratories - Requirements and test methods
DS/EN 13050:2011 Curtain Walling - Watertightness - Laboratory test under dynamic condition of air pressure and water spray
DS/EN 1395-4:2007 Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 4: Plasma spraying
DS/ISO 22856:2009 Equipment for crop protection - Methods for the laboratory measurement of spray drift - Wind tunnels

Lithuanian Standards Office

LST EN 1395-5-2007 Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 5: Plasma spraying in chambers
LST EN ISO 14923:2004 Thermal spraying - Characterization and testing of thermally sprayed coatings (ISO 14923:2003)
LST EN ISO 14918:2001 Thermal spraying - Approval testing of thermal sprayers (ISO 14918:1998)
LST EN 14727-2006 Laboratory furniture - Storage units for laboratories - Requirements and test methods
LST EN 1395-3-2007 Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 3: Arc spraying
LST EN 13050-2011 Curtain Walling - Watertightness - Laboratory test under dynamic condition of air pressure and water spray
LST EN 1395-4-2007 Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 4: Plasma spraying
LST EN 15457-2014 Paints and varnishes - Laboratory method for testing the efficacy of film preservatives in a coating against fungi

AENOR

UNE-EN 1395-5:2008 Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 5: Plasma spraying in chambers
UNE-EN ISO 14923:2004 Thermal spraying - Characterization and testing of thermally sprayed coatings (ISO 14923:2003)
UNE-EN ISO 14918:1999 THERMAL SPRAYING. APPROVAL TESTING OF THERMAL SPRAYERS (ISO 14918:1998)
UNE-EN 14727:2006 Laboratory furniture - Storage units for laboratories - Requirements and test methods
UNE-EN 1395-3:2008 Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 3: Arc spraying
UNE-EN 13050:2011 Curtain Walling - Watertightness - Laboratory test under dynamic condition of air pressure and water spray
UNE-EN 1395-4:2008 Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 4: Plasma spraying

European Committee for Standardization (CEN)

EN 1395-5:2018 Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 5: Plasma spraying in chambers
EN 1395-5:2007 Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 5: Plasma spraying in chambers
EN ISO 14918:2018 Thermal spraying - Qualification testing of thermal sprayers
EN ISO 14918:1998 Thermal Spraying - Approval Testing of Thermal Sprayers ISO 14918:1998
EN 12981:2005+A1:2009 Coating plants - Spray booths for application of organic powder coating material - Safety requirements
CEN PREN 14727-2003 Laboratory furniture - Storage units for laboratories - Requirements and test methods
EN 1395:1996 Thermal Spraying - Acceptance Inspection of Thermal Spraying Equipment
EN 15458:2014 Paints and varnishes - Laboratory method for testing the efficacy of film preservatives in a coating against algae
EN 15457:2014 Paints and varnishes - Laboratory method for testing the efficacy of film preservatives in a coating against fungi
DD ENV 13050-2000 Curtain Walling - Watertightness - Laboratory Test under Dynamic Condition of Air Pressure and Water Spray
EN 15457:2007 Paints and varnishes - Laboratory method for testing the efficacy of film preservatives in a coating against fungi
EN 15458:2007 Paints and varnishes - Laboratory method for testing the efficacy of film preservatives in a coating against algae
EN ISO 20566:2021 Paints and varnishes - Determination of the scratch resistance of a coating system using a laboratory-scale car-wash (ISO 20566:2020)

Korean Agency for Technology and Standards (KATS)

KS D ISO 14918:2013 Thermal spraying－Approval testing of thermal sprayers
KS D ISO 14918:2001 Thermal spraying-Approval testing of thermal sprayers
KS D ISO 14923-2013(2018) Trermal spraying — Characterization and test of thermally sprayed coatings
KS D ISO 14918-2001(2011) Thermal spraying－Approval testing of thermal sprayers
KS D ISO 14923:2003 Thermal spraying-Characterization and testing of thermally sprayed coatings
KS D ISO 14923:2013 Trermal spraying — Characterization and test of thermally sprayed coatings
KS D ISO 14918-2013 Thermal spraying－Approval testing of thermal sprayers
KS D ISO 14923-2023 Trermal spraying — Characterization and test of thermally sprayed coatings
KS D 8333-1994 Testing methods for thermally sprayed ceramics coating
KS D 8327-2001 Test methods for steel spray deposits
KS D 8333-2003(2008) Test methods for ceramic sprayed coatings
KS D 8327-1981 Test methods for steel spray deposits
KS D 8323-2003 TEST METHODS FOR ZINC SPARYED COATINGS
KS D ISO 14231:2001 Thermal spraying-Acceptance inspection of thermal spraying equipment
KS D ISO 14231:2013 Thermal spraying－Acceptance inspection of thermal spraying equipment
KS D 8325-1981 Testing methods for spray fused coatings of self-fluxing alloys
KS D ISO 14231-2013 Thermal spraying－Acceptance inspection of thermal spraying equipment
KS I ISO TS 20612:2019 Water quality — Interlaboratory comparisons for proficiency testing of analytical chemistry laboratories
KS D 8325-1996 Testing methods for spray fused coatings of self-fluxing alloys
KS M ISO 20566:2013 Paints and varnishes ㅡ Determination of the scratch resistance of a coating system using a laboratory car-wash
KS M ISO 20566:2011 Paints and varnishes-Determination of the scratch resistance of a coating system using a laboratory car-wash
KS I ISO 20612:2009 Water quality－Interlaboratory comparisons for proficiency testing of analytical chemistry laboratories
KS P ISO 15195-2014(2019) Laboratory medicine — Requirements for reference measurement laboratories
KS F 2312-2022 Test method for soil compaction in laboratory
KS P ISO 15195:2007 Laboratory medicine-Requirements for reference measurement laboratories
KS F 2312-1986 Test method for soil compaction in laboratory
KS P ISO 15195:2014 Laboratory medicine — Requirements for reference measurement laboratories
KS F 2494-2022 Standard test method of the laboratory permeability test for

American National Standards Institute （ANSI)

ANSI/AMCA 250-2012 Laboratory Methods of Testing Jet Tunnel Fans for Rating

ZA-SANS

SANS 51395-5:2009 Thermal spraying - Acceptance inspection of thermal spraying equipment Part 5: Plasma spraying in chambers
SANS 51395:1996 Thermal spraying - Acceptance inspection of thermal spraying equipment
SANS 5422:2007 Pesticides - Biological evaluation of insecticidal sprays on compost (laboratory test)
SANS 51395-3:2009 Thermal spraying - Acceptance inspection of thermal spraying equipment Part 3: Arc spraying
SANS 51395-4:2009 Thermal spraying - Acceptance inspection of thermal spraying equipment Part 4: Plasma spraying
SANS 50582:1993 Thermal spraying - Determination of tensile adhesive strength

ES-UNE

UNE-EN 1395-5:2019 Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 5: Plasma spraying in chambers
UNE-EN ISO 14918:2019 Thermal spraying - Qualification testing of thermal sprayers (ISO 14918:2018)
UNE-EN 17393:2020 Thermal spraying - Tubular coating tensile test

CZ-CSN

CSN 67 3094-1980 Laboratory testing of protective efficiency of palat coating on metals. Testing in sulphur dioxide atmosphere with condensing moisture and in salt spray fog
CSN 67 3091-1983 Laboratory tests of resistance of paint coatings in atmospherical conditíons
CSN 67 3086-1981 Laboiatory test ?or deterniinalion of tesistance of coaling on metals againsl osmutic blistering

GSO

OS GSO 1253:2002 Testing emulsified asphats emulsified asphalt/lab aggregate coating test
GSO ISO 14918:2013 Thermal spraying -- Approval testing of thermal sprayers
GSO ISO 14923:2013 Thermal spraying -- Characterization and testing of thermally sprayed coatings
BH GSO ISO 14918:2016 Thermal spraying -- Approval testing of thermal sprayers
GSO ISO 14231:2013 Thermal spraying -- Acceptance inspection of thermal spraying equipment
GSO 1253:2002 Testing emulsified asphats emulsified asphalt/lab aggregate coating test
GSO ISO 22856:2016 Equipment for crop protection -- Methods for the laboratory measurement of spray drift -- Wind tunnels
OS GSO ISO 22856:2016 Equipment for crop protection -- Methods for the laboratory measurement of spray drift -- Wind tunnels
BH GSO 2144:2012 Test methods of Laboratory Filter Papers
OS GSO 2144:2011 Test methods of Laboratory Filter Papers
BH GSO ISO 22856:2017 Equipment for crop protection -- Methods for the laboratory measurement of spray drift -- Wind tunnels
GSO 2144:2011 Test methods of Laboratory Filter Papers
BH GSO ISO 14231:2016 Thermal spraying -- Acceptance inspection of thermal spraying equipment
GSO ISO 15195:2012 Laboratory medicine -- Requirements for reference measurement laboratories

KR-KS

KS D ISO 14923-2013(2023) Trermal spraying — Characterization and test of thermally sprayed coatings
KS V 8891-2023 Laboratory test method for skin friction of antifouling paints by rotating drum
KS I ISO TS 20612-2019 Water quality — Interlaboratory comparisons for proficiency testing of analytical chemistry laboratories

(U.S.) Ford Automotive Standards

FORD FLTM BI 123-01-2005 PAINTED SHEET METAL CORROSION TEST (LABORATORY-SIMULATED ARIZONA PROVING GROUND TEST)
FORD M99B14-A-1985 STRIPPABLE COATING FOR SPRAY BOOTHS
FORD M99B153-A-1980 SPRAY BOOTH COATING - WATER BASE - TACKY - CLEAR
FORD M99B161-A-1982 PAINT SPRAY BOOTH BACK SECTION COATING

HU-MSZT

MSZ 9178-1959 Paint layer firmness testing laboratory testing
MSZ 18154-1972 Airborne and acoustic test laboratory, field testing
MSZ 5003-1962 Simple reagent container measurement in laboratory

International Organization for Standardization (ISO)

ISO 14923:2003 Thermal spraying - Characterization and testing of thermally sprayed coatings
ISO 14918:2018 Thermal spraying - Qualification testing of thermal sprayers
ISO 22856:2008 Equipment for crop protection - Methods for the laboratory measurement of spray drift - Wind tunnels
ISO/IEC GUIDE 38:1983 General requirements for the acceptance of testing laboratories
ISO/TS 20612:2007 Water quality - Interlaboratory comparisons for proficiency testing of analytical chemistry laboratories
ISO 14231:2000 Thermal spraying - Acceptance inspection of thermal spraying equipment
ISO 20566:2013 Paints and varnishes - Determination of the scratch resistance of a coating system using a laboratory-scale car-wash
ISO 15195:2003 Laboratory medicine - Requirements for reference measurement laboratories

Canadian General Standards Board （CGSB)

CGSB 1-GP-71 METH 143.3-1978 Methodes D'Essai Des Peintures Et Pigments Resistance A Long Terme A L'Exterieur Essai D'Une Couche De Revetement Cuite Appliquee Sur De L'Acier Revetu D'Une Peinture Primaire
CGSB 1-GP-71 METH 143.2-1978 Methodes D'Essai Des Peintures Et Pigments Resistance A Long Terme A L'Exterieur Essai D'Une Couche De Produit Sechant A L'Air Sur De L'Acier Recouvert D'Une Peinture Primaire
CGSB 1-GP-71 METH 100.2-1982 Methodes D'Essai Des Peintures Et Pigments Preparation Des Plaques En Acier Decapage Au Jet De Sable Ou De Grenaille

Society of Automotive Engineers (SAE)

SAE AS5505-2001 Requirements for Accreditation of Testing Laboratories for Organic Coatings
SAE AS5505A-2019 Requirements for Accreditation of Testing Laboratories for Organic Coatings
SAE J2334-2003 Laboratory Cyclic Corrosion Test
SAE AS7109/5A-2005 (R) Nadcap Requirements for Coating Evaluation Laboratory Practices

US-FCR

FCR VA 01 45 29-2012 TESTING LABORATORY SERVICES
FCR FED H-08-1 SEC 01410-2004 TESTING LABORATORY SERVICES
FCR COE ER 1110-1-8100-1997 LABORATORY INVESTIGATIONS AND TESTING
FCR COE ER 1140-1-210-1979 LABORATORY INVESTIGATIONS AND MATERIALS TESTING

CEN - European Committee for Standardization

PREN 17393-2019 Thermal spraying - Tubular coating tensile test
EN ISO 20566:2006 Paints and varnishes - Determination of the scratch resistance of a coating system using a laboratory car-wash
EN ISO 15195:2019 Laboratory medicine - Requirements for the competence of calibration laboratories using reference measurement procedures

PL-PKN

PN-EN 17393-2021-01 E Thermal spraying -- Tubular coating tensile test
PN BN 6110-19-1966 Polyurethane coating products. Laboratory testing systems
PN C94158-1967 Coated fabrics Methods of test
PN C81500-1974 Pain?s Sampling and preparation of laboratory sample
PN B04481-1988 Building soils Laboratory tests

Association of German Mechanical Engineers

DVS 0941-5-2012 Solid wire thermal spray

Indonesia Standards

SNI 1744-2012 Metode uji CBR laboratorium
SNI 03-3399-1994 Test method for tensile strength of wood in the laboratories
SNI 07-6217-2000 Testing methods of metal laboratory corrosion

NL-NEN

NEN 2908-1985 Woodpreservation - Spraying in a cabin

SAE - SAE International

SAE J2334-2002 Cosmetic Corrosion Lab Test
SAE J2334-2016 Laboratory Cyclic Corrosion Test
SAE J2334-1998 Cosmetic Corrosion Lab Test
SAE AS7109/5B-2017 Nadcap Requirements for Coating Evaluation Laboratory Practices

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc.

ASHRAE CH-99-9-1999 Symposium on Laboratory Verification and Testing

FI-SFS

SFS 5207-1986 Planning and implementation of laboratory qualification testing
SFS 5120-1985 Passed by testing laboratory. General requirements

SE-SIS

SIS SS 02 01 81-1985 General requirements for the acceptance of testing laboratories
SIS SS-ISO 3768:1979 Metallic coatings — Neutral salt spray test (NSS test)
SIS SS 1780-1981 Spray painting equipment — Paint separation test
SIS SS 02 71 09-1989 Geotechnical tests — Compaction properties — Laboratory compaction
SIS SS 16 18 12-1984 Plastics — Methods of exposure to laboratory light sources

RO-ASRO

STAS 1913/6-1976 Foundation ground LABORATORY PERMEABILITY TEST

ES-AENOR

UNE 66-802-1989 Organization and implementation of laboratory proficiency tests

Compressed Gas Association (U.S.)

CGA M-13-2014 Certifying third-party testing laboratories
CGA M-13-2008 Certifying third-party testing laboratories

RU-GOST R

GOST R 51000.3-1996 General criteria for testing laboratories
GOST 30416-2012 Soils. Laboratory testing. General requirements
GOST R ISO 15195-2006 Laboratory medicine. Requirements for reference measurement laboratories
GOST 33696-2015 Drilling fluids. Laboratory testing