Optical rotation angle

Optical rotation angle, Total:188 items.

The international standard classification for "Optical rotation angle" includes: Measuring instruments , Essential oils , Chemical reagents , Hand-held tools , Hand-operated tools .

The Chinese standard classification for "Optical rotation angle" includes: Measuring tool and instrument , Electron optics and other physical optics instrument , Fragrances and flavors , Chemical reagent in general , Hand tool , Length Measurement , Optical Measurement , Chemical Measurement , Pipe fittings, clamps and seals .

Professional Standard - Machinery

JB/T 5593-1991 Polarimeter
JB/T 9942-2012 Angle grating encoder

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 5358-1998 Hexagon spline screwdrivers
GB/T 14454.5-2008 Fragrance/Flavor substances - Determination of optical rotation
GB/T 14454.5-1993 Aromatics. Determination of optical rotation
GB/T 613-1988 Chemical reagent-General method for the determination of specific optical rotation
GB/T 613-2007 Chemical reagent - General method for the determination of specific optical rotatory power (specific optical rotation)

Taiwan Provincial Standard of the People's Republic of China

CNS 5280-1984 Helix Angles for Cylindrical Gears
CNS 6574-1980 Determination of the Optical Rotation of Essential Oils
CNS 11409-1995 Angle Cocks for Railway Rolling Stock
CNS 7299-1994 Method of Test for Specular Gloss of Paper and Paperboard at 75 Degrees
CNS 6574-2006 Essential oils - Determination of optical rotation
CNS 8837-1996 Methods of Test for Optical Rotation of Chemical Products

Professional Standard - Light Industry

QB/T 4209-2011 Screwdriver bits for hexagon socket screws
QB/T 2564.7-2015 Screwdrivers. Screwdriver for hexagon socket screws
QB 797-1981 Unified test method for spices by polarimetry
QB 975-1984 Essential oils - Determination of optical rotation
QB/T 2564.8-2015 Screwdrivers. Spin type screwdriver bit holder
QB/T 2564.9-2015 Screwdrivers. Screwdriver for serration socket screws

National Metrological Verification Regulations of the People's Republic of China

JJG 228-1993 Verification Regulation of Static Low Angle Laser Light Scattering Spectrophotometer
JJG 998-2005 Verification Regulation of Laser Measuring Instruments for Small Angles
JJG 536-1998 Polarimeter and Saccharimeter
JJG 536-2015 Polarimeter and Polarimetric Saccharimeters
JJG 850-2005 Verification Regulation of Optical Angle Gauge

Professional Standard - Agriculture

94药典四部-2015 0600 Determination of physical constants 0621 Determination of optical rotation
2316药典二部-2010 Appendix VI E Optical Polarimetry
GB/T 613-2007(XG1-2009) Amendment No. 1 of National Standard "General Method for Determination of Specific Optical Rotation Power (Specific Optical Rotation) of Chemical Reagents"
75药典四部-2020 0600 Determination of physical constants 0621 Determination of optical rotation
NY/T 4362-2023 Feed additives-Determination of keratinase activity-Spectrophotometric method
GB 613-1977 General method for photometric determination of violet rotation of chemical reagents
1774药典一部-2010 Appendix VII E Optical polarimetry

工业和信息化部/国家能源局

JB/T 13542-2018 Angle grating encoder accuracy-Testing specification

Group Standards of the People's Republic of China

T/SHMHZQ 068-2022 Calibration method for initial resolver angle of permanent magnet synchronous drive motor for electric vehicles
T/QGCML 4032-2024 Filters that reduce spectral shifts at specific angles
T/QGCML 1535-2023 Technical requirements for industrial multi-angle constant pressure polishing equipment
T/QGCML 4033-2024 Ultra-wide angle highly reflective optical elements

Military Standard of the People's Republic of China-General Armament Department

GJB 9621-2019 Specification for spacecraft grating angle encoders

工业和信息化部

QB/T 5377-2019 Screwdriver bits for serration socket screws
QB/T 5378-2019 Screwdriver bits for 6-lobes star socket screws

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 5358-2021 Screwdriver for hexalobular socket screws

Professional Standard - Aviation

HB 7523-1997 Quadrature Tube Joint with Swivel Nut
HB 1383-1984 left angle iron
HB 1382-1984 right angle iron

National Metrological Technical Specifications of the People's Republic of China

JJF 1573-2016 Program of Pattern Evaluation of Polarimeters and Polarimetric saccharimeters

RU-GOST R

GOST 14618.9-1978 Essential oils, aromatics and their intermediates. Method for determination of angle of optical rotation and specific rotation value of polarization flat
GOST R 53125-2008 Honey. Method for determination of optical activity
GOST 31773-2012 Honey. Method for determination of optical activity
GOST ISO 592-2014 Essential oils. Method for determination of optical rotation

Korean Agency for Technology and Standards (KATS)

KS B 0903-2013 Welds－Working positions－Definitions of angles of slope and rotation
KS H ISO 592-2014(2019) Essential oils — Determination of optical rotation
KS H ISO 592:2014 Essential oils — Determination of optical rotation
KS H ISO 592-2019 Essential oils — Determination of optical rotation
KS M 0006-2010 Test methods for optical rotation of chemical products
KS H ISO 592:2006 Essential oils-Determination of optical rotation
KS B 3962-2013 Left-or Right -Hand of Cuts , Angles and Threads in Angle Cutters
KS B 0903-2001(2011) Welds－Working positions－Definitions of angles of slope and rotation
KS B 0903-2001 Welds-Working positions-Definitions of angles of slope and rotation
KS M 0006-2020 Test methods for optical rotation of chemical products
KS C IEC 61341-2014(2019) Method of measurement of centre beam intensity and beam angle(s) of reflector lamps
KS B 5263-1991(2021) Optical Polygons for Angle Standards
KS B 5263-1991(2016) Optical Polygons for Angle Standards
KS B 5263-2021 Optical Polygons for Angle Standards
KS C IEC 61341-2019 Method of measurement of centre beam intensity and beam angle(s) of reflector lamps
KS V 7422-2014 Marine bronze 5 K screw-down check angle valves 5 K screw-down check angle valves(union bonnet type)

Military Standards (MIL-STD)

DOD A-A-53465-1988 CURETTE, EAR (HOUSE, LIGHT, ANGLE)
DOD A-A-53418-1988 RETRACTOR, CHEEK, LIGHT ANGLE (JOHNSON)

Association Francaise de Normalisation

NF A80-010:1997 Welds. Working positions. Definitions of angles of slope and rotation.
NF ISO 592:1999 Huiles essentielles - Détermination du pouvoir rotatoire
NF V03-622:1985 Dextrose,D-fructose. Determination of optical rotation.
NF A91-490*NF EN ISO 7759:2010 Anodizing of aluminium and its alloys - Measurement of reflectance characteristics of aluminium surfaces using agoniophotometer or an abridged goniophotometer
NF L22-434:1987 HEXAGONAL NUTS. NORMAL HEIGHT. NORMAL ACROSS FLATS. ISO LH THREAD. 4H CLASS.
NF L22-433:1987 HEXAGONAL NUTS. NORMAL HEIGHT. NORMAL ACROSS FLATS. ISO RH THREAD. 4H CLASS.

Illuminating Engineering Society of North America

IESNA LM-75-2001 Goniophotometer Types and Photometric Coordinates

German Institute for Standardization

DIN 3532:1981 Valves for gas installations; angle pattern stop cocks
DIN 3533:1981 Valves for gas installations; angle pattern stop cocks with compression fitting
DIN 7431:1978 Screwdrivers for Hexagon Insert Bits
DIN EN 61341:2012-08 Method of measurement of centre beam intensity and beam angle(s) of reflector lamps (IEC/TR 61341:2010); German version EN 61341:2011 / Note: DIN IEC/TR 61341 (2011-01) remains valid alongside this standard until 2014-07-04.
DIN 5032-11 E:2019-09 Photometry - Part 11: Near-field goniophotometers, terms, characteristics and their designation
DIN 5032-11:2020-07 Photometry - Part 11: Near-field goniophotometers, terms, characteristics and their designation
DIN 5032-11 E:2018-02 Photometry - Part 11: Near-field goniophotometers, terms, characteristics and their designation
DIN 10:2009 Squares of parallel shanks for rotating tools
DIN 3125:2000 Hexagon socket wrenches, spin type
DIN 909:1973 Hexagon head pipe plugs
DIN 909 E:2019-02 Hexagon head pipe plugs
DIN EN ISO 6947:1997 Welds – Working positions Definitions of angles of slope and rotation
DIN 3978:1976 Helix Angles for Cylindrical Gear Teeth
DIN EN ISO 7759:2010-12 Anodizing of aluminium and its alloys - Measurement of reflectance characteristics of aluminium surfaces using a goniophotometer or an abridged goniophotometer (ISO 7759:2010); German version EN ISO 7759:2010
DIN 58141-10:1997 Testing of fibre optic elements - Part 10: Determination of illuminance and acceptance angle of cold light sources
DIN 909:1992 Hexagon head pipe plugs

RO-ASRO

STAS SR ISO 6947:1994 Welds. Working positions. Definitions of angles of slope and rotation.

International Organization for Standardization (ISO)

ISO 6947:2019 Welding and allied processes — Welding positions
ISO 592:1998 Essential oils - Determination of optical rotation
ISO 592:1981 Essential oils — Determination of optical rotation
ISO 7759:1983 Anodizing of aluminium and its alloys; Measurement of reflectivity characteristics of aluminium surfaces using abridged goniophotometer or goniophotometer
ISO 7759:2010 Anodizing of aluminium and its alloys - Measurement of reflectance characteristics of aluminium surfaces using a goniophotometer or an abridged goniophotometer

GSO

GSO ISO 592:2015 Essential oils -- Determination of optical rotation
BH GSO ISO 592:2016 Essential oils -- Determination of optical rotation
OS GSO OIML R14:2014 Polarimetric saccharimeters graduated in accordance with the ICUMSA International Sugar Scale
BH GSO OIML R14:2015 Polarimetric saccharimeters graduated in accordance with the ICUMSA International Sugar Scale
OS GSO IEC/TR 61341:2014 Method of measurement of centre beam intensity and beam angle(s) of reflector lamps
BH GSO IEC/TR 61341:2016 Method of measurement of centre beam intensity and beam angle(s) of reflector lamps
GSO ISO 7759:2015 Anodizing of aluminium and its alloys -- Measurement of reflectance characteristics of aluminium surfaces using a goniophotometer or an abridged goniophotometer
BH GSO ISO 7759:2016 Anodizing of aluminium and its alloys -- Measurement of reflectance characteristics of aluminium surfaces using a goniophotometer or an abridged goniophotometer
OS GSO IEC 61300-3-37:2015 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-37: Examinations and measurements - Endface angle of angle-polished optical fibres
GSO IEC/TR 61341:2014 Method of measurement of centre beam intensity and beam angle(s) of reflector lamps
GSO ISO 17123-3:2007 Optics and optical instruments- Field procedures for testing geodetic and surveying instruments- Part 3: Theodolites

British Standards Institution (BSI)

BS ISO 592:1998(2001) Essential oils — Determination of optical rotation
BS ISO 592:1998 Essential oils - Determination of optical rotation
BS ISO 592:2001 Essential oils - Determination of optical rotation
BS EN 12373-13:2001 Aluminium and aluminium alloys. Anodizing. Measurement of reflectance characteristics of aluminium surfaces using a goniophotometer or an abridged goniophotometer
BS EN 61341:2011 Method of measurement of centre beam intensity and beam angle(s) of reflector lamps
BS EN ISO 7759:2010 Anodizing of aluminium and its alloys. Measurement of reflectance characteristics of aluminium surfaces using a goniophotometer or an abridged goniophotometer
BS EN ISO 8254-1:2009 Paper and board - Measurement of specular gloss - 75 degree gloss with a converging beam, TAPPI method
BS EN 61341:2010 Method of measurement of centre beam intensity and beam angle(s) of reflector lamps
BS 3962-1:1980 Methods of test for finishes for wooden furniture - Assessment of low angle glare by measurement of specular gloss at 85 °
BS ISO 19986:2020 Lasers and laser-related equipment. Test method for angle resolved scattering

Spanish Association for Standardization (UNE)

UNE 84159:2002 Essential oils. Determination of optical rotation.
UNE-EN ISO 6947:1997 WELDS. WORKING POSITIONS. DEFINITIONS OF ANGLES SLOPE AND ROTATION (ISO 6947:1993).
UNE-EN 61341:2012 Method of measurement of centre beam intensity and beam angle(s) of reflector lamps
UNE-EN 61300-3-37:2006 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 3-37: Examinations and measurements - Endface angle of angle-polished optical fibres
UNE-EN 12373-13:2001 Aluminium and aluminium alloys. Anodizing. Part 13: Measurement of reflectance characteristics of aluminium surfaces using a goniophotometer or an abridged goniophotometer.
UNE-EN ISO 7759:2011 Anodizing of aluminium and its alloys - Measurement of reflectance characteristics of aluminium surfaces using a goniophotometer or an abridged goniophotometer (ISO 7759:2010)

IN-BIS

IS 8661-1977 Specifications for polarimeters and sugar meters (optical)
IS 5812-1970 Optical Bevel Protractor Specifications

CZ-CSN

CSN 68 4075-1983 Met hod for determination of specific otatien
CSN 22 2662-1955 Gear hobbing machine rotating tools. Wheel angle a-15
CSN ON 22 2520-1968 Gear hobbing machine rotating tool with smaller diameter angle 20°
CSN 31 3208-1949 Left-hand hexagonal nut

United States Navy

NAVY MIL-E-85082 A-1992 ENCODERS, SHAFT ANGLE TO DIGITAL, GENERAL SPECIFICATION FOR

SCC

VDI/VDE 2648 BLATT 2-2007 Sensors and measuring systems for angle measurement — Instructions for traceable calibration — Indirectly measuring angle measuring systems
VDI/VDE 2648 BLATT 1-2009 Sensors and measuring systems for angle measurement — Instructions for traceable calibration — Direct measuring angle measuring systems
CEI EN 61341:2012 Method of measurement of centre beam intensity and beam angle(s) of reflector lamps
DANSK DS/EN 61341:2011 Method of measurement of centre beam intensity and beam angle(s) of reflector lamps
BS PD IEC/TR 61341:2010 Method of measurement of centre beam intensity and beam angle(s) of reflector lamps
CEI EN 61300-3-37:2005 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-37: Examinations and measurements - Endface angle of angle-polished optical fibres
DANSK DS/EN 61300-3-37:2005 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-37: Examinations and measurements - Endface angle of angle-polished optical fibres
BS EN ISO 6947:1997 Welds. Working positions. Definitions of angles of slope and rotation
DANSK DS/EN ISO 7759:2010 Anodizing of aluminium and its alloys - Measurement of reflectance characteristics of aluminium surfaces using a goniophotometer or an abridged goniophotometer
NS-EN ISO 7759:2010 Anodizing of aluminium and its alloys - Measurement of reflectance characteristics of aluminium surfaces using a goniophotometer or an abridged goniophotometer (ISO 7759:2010)
09/30195849 DC BS EN ISO 7759. Anodizing of aluminium and its alloys. Measurement of reflectance characteristics of aluminium surfaces using a goniophotometer or an abridged goniophotometer
NS-EN 12373-13:2000 Aluminium and aluminium alloys - Anodizing - Part 13: Measurement of reflectance characteristics of aluminium surfaces using a goniophotometer or abridged goniophotometer
BS EN ISO 11146:2000 Laser and laser-related equipment. Test methods for laser beam parameters. Beam width, divergence angle and beam
DIN 5032-11 E:2019 Draft Document - Photometry - Part 11: Near-field goniophotometers, terms, characteristics and their designation

VDI - Verein Deutscher Ingenieure

VDI/VDE 2648 Blatt 1-2007 Transducers and measuring systems for measurement of angle - Instructions for traceable calibration - Indirect measure angle measuring systems

Japanese Industrial Standards Committee (JISC)

JIS C 8105-5:2021 Luminaires -- Part 5: Gonio-photometric methods
JIS B 7432:1985 Optical polygons for angle standards
JIS Z 3011:2004 Welding position defined by means of angles of slope and rotation
JIS Z 3011:2014 Welding positions defined by means of angles of slope and rotation
JIS E 4102:1991 Angle cocks for railway rolling stock

American Society for Testing and Materials (ASTM)

ASTM E430-97 Standard Test Methods for Measurement of Gloss of High-Gloss Surfaces by Goniophotometry
ASTM E2175-01(2021) Standard Practice for Specifying the Geometry of Multiangle Spectrophotometers
ASTM F907-85E01R92 Test Method for Measurement of Rotational Acceleration of a Wafer for Photoresist Spin Coating
ASTM F907-85(1992)e1 Test Method for Measurement of Rotational Acceleration of a Wafer for Photoresist Spin Coating
ASTM RR-E12-1006 2011 E0430-Test Methods for Measurement of Gloss of High-Gloss Surfaces by Abridged Goniophotometry
ASTM E430-05 Standard Test Methods for Measurement of Gloss of High-Gloss Surfaces by Abridged Goniophotometry
ASTM E430-11 Standard Test Methods for Measurement of Gloss of High-Gloss Surfaces by Abridged Goniophotometry
ASTM E430-97(2003) Standard Test Methods for Measurement of Gloss of High-Gloss Surfaces by Goniophotometry
ASTM E2175-01(2008) Standard Practice for Specifying the Geometry of Multiangle Spectrophotometers
ASTM E2175-01(2013) Standard Practice for Specifying the Geometry of Multiangle Spectrophotometers
ASTM E2175-01 Standard Practice for Specifying the Geometry of Multiangle Spectrophotometers
ASTM C1942-24 Standard Practice for Evaluation of Low Angle Light Characteristics

YU-JUS

JUS C.T3.008-1993 Welds - Working positions - Definitions of angles of slope and rotation

American Gear Manufacturers Association

AGMA 2000FTMS1-2000 Effects of Helix Slope and Form Deviation on the Contact and Fillet Stresses of Helical Gears

Indonesia Standards

SNI 05-6703-2002 Hexagon socket screw keys

AT-ON

ONORM M 6724-1988 Helix anglesfor cylindrical gears

SE-SIS

SIS SS 598-1991 Angles and rates of prisms on wedges and prisms
SIS SS-ISO 7759:1988 Anodizing of aluminium and its alloys — Measurement of reflectivity characteristics of aluminium surfaces using abridged go- niophotometer or goniophotometer
SIS SMS 795-1975 Hexagon socket screw keys. Metric series

HU-MSZT

MSZ 4934-1982 Rotate the 64-corner eye multiple times
MSZ 05 29.4010-1973 Corner extender for auger
MNOSZ 15587-1953 Polarimeter
MSZ 10783/3-1970 Mechanical angle detection mode. Angle thickness detection
MSZ 10783/4-1970 Mechanical angle detection mode angle thickness detection

JP-JARI

JRIS E 4102-2004 Angle cocks for railway rolling stock

Danish Standards Foundation

DS/EN 61341:2011 Method of measurement of centre beam intensity and beam angle(s) of reflector lamps
DS/EN ISO 7759:2010 Anodizing of aluminium and its alloys - Measurement of reflectance characteristics of aluminium surfaces using a goniophotometer or an abridged goniophotometer

European Committee for Electrotechnical Standardization（CENELEC）

EN 61341:2011 Method of measurement of centre beam intensity and beam angle(s) of reflector lamps
EN 61300-3-37:2005 Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3-37: Examinations and measurements Endface angle of angle-polished optical fibres

International Electrotechnical Commission (IEC)

IEC 61341:1994 Method of measurement of centre beam intensity and beam angle(s) of reflector lamps
IEC TR 61341:2010 Method of measurement of centre beam intensity and beam angle(s) of reflector lamps

South African Bureau of Standard

SANS 6947:1990 Welds - Working positions - Definitions of angles of slope and rotation

European Committee for Standardization (CEN)

EN 12373-13:2000 Aluminium and Aluminium Alloys - Anodizing - Part 13: Measurement of Reflectance Characteristics of Aluminium Surfaces Using a Goniophotometer or an Abridged Goniophotometer
EN ISO 7759:2010 Anodizing of aluminium and its alloys - Measurement of reflectance characteristics of aluminium surfaces using a goniophotometer or an abridged goniophotometer (ISO 7759:2010)

Lithuanian Standards Office

LST EN ISO 7759:2011 Anodizing of aluminium and its alloys - Measurement of reflectance characteristics of aluminium surfaces using a goniophotometer or an abridged goniophotometer (ISO 7759:2010)

Defense Logistics Agency

DLA A-A-51186 B VALID NOTICE 1-2013 Files, Rotary, Tapered, 14 Degree Cone Shape, Radius Nose, High Speed Steel or Tungsten Carbide

PL-PKN

PN C04951-1986 Chemical analysis Determination of optical rotation of organie compounds

GOST

GOST R 70974-2023 Optics and photonics. Lasers and laser-related equipment. Test method for angle resolved scattering

GB-REG

REG NACA-TN-1303-1947 A transonic propeller of triangular plan form