iso design size

iso design size, Total:200 items.

The international standard classification for "iso design size" includes: Horology in general .

The Chinese standard classification for "iso design size" includes: Horology .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 34839-2017 Timekeeping instruments-Designs and dimensions of crowns and sealed tubes

Spanish Association for Standardization (UNE)

UNE-EN ISO 12215-5:2008 Small craft - Hull construction and scantlings - Part 5: Design pressures for monohulls, design stresses, scantlings determination (ISO 12215-5:2008)
UNE-EN ISO 3611:2024 Geometrical product specifications (GPS) - Dimensional measuring equipment - Design and metrological characteristics of micrometers for external measurements (ISO 3611:2023)
UNE-EN ISO 13385-1:2012 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Callipers; Design and metrological characteristics (ISO 13385-1:2011)
UNE 56-807-1986 Wood floor design and dimensions
UNE-EN ISO 13225:2012 Geometrical product specifications (GPS) - Dimensional measuring equipment; Height gauges - Design and metrological characteristics (ISO 13225:2012)
UNE-EN ISO 3611:2012 Geometrical product specifications (GPS) - Dimensional measuring equipment: Micrometers for external measurements - Design and metrological characteristics (ISO 3611:2010)
UNE-EN ISO 12215-5:2008/A1:2014 Small craft - Hull construction and scantlings - Part 5: Design pressures for monohulls, design stresses, scantlings determination - Amendment 1 (ISO 12215-5:2008/Amd 1:2014)
UNE-EN ISO 13385-2:2012 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Calliper depth gauges; Design and metrological characteristics (ISO 13385-2:2011)
UNE-EN ISO 463:2006 Geometrical Product Specifications (GPS) - Dimensional measuring equipment - Design and metrological characteristics of mechanical dial gauges (ISO 463:2006)
UNE-EN ISO 13102:2013 Geometrical product specifications (GPS) - Dimensional measuring equipment: Electronic digital-indicator gauge - Design and metrological characteristics (ISO 13102:2012)
UNE-EN ISO 12215-5:2020 Small craft - Hull construction and scantlings - Part 5: Design pressures for monohulls, design stresses, scantlings determination (ISO 12215-5:2019)

German Institute for Standardization

DIN EN ISO 12215-5:2020 Small craft - Hull construction and scantlings - Part 5: Design pressures for monohulls, design stresses, scantlings determination (ISO 12215-5:2019)
DIN EN ISO 7250:1997-10 Basic human body measurements for technological design (ISO 7250:1996)
DIN 20550:1990-07 Mine cars size small; components, main dimensions, design
DIN 20570:1989-04 Mine cars; large size; dimensions, design and construction
DIN EN ISO 12215-5 E:2004-12 Draft Document - Small craft - Hull construction and scantlings - Part 5: Design pressures, design stresses, scantling determination (ISO/DIS 12215-5.2:2004); German version prEN ISO 12215-5:2004
DIN EN ISO 12215-5 E:2004 Draft Document - Small craft - Hull construction and scantlings - Part 5: Design pressures, design stresses, scantling determination (ISO/DIS 12215-5.2:2004); German version prEN ISO 12215-5:2004
DIN 20560:1989-07 Mine cars; middle size; dimensions, design and construction
DIN EN ISO 11855-3:2015-11 Building environment design - Design, dimensioning, installation and control of embedded radiant heating and cooling systems - Part 3: Design and dimensioning (ISO 11855-3:2012)
DIN EN ISO 13385-1:2011-12 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Callipers; Design and metrological characteristics (ISO 13385-1:2011)
DIN EN ISO 13385-2:2020 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Design and metrological characteristics of calliper depth gauges (ISO 13385-2:2020); German and English version EN ISO 13385-2:2020
DIN EN ISO 13385-1:2020 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Design and metrological characteristics of callipers (ISO 13385-1:2019)
DIN EN ISO 3611:2024 Geometrical product specifications (GPS) - Dimensional measuring equipment - Design and metrological characteristics of micrometers for external measurements (ISO 3611:2023)
DIN EN ISO 13385-2:2011-12 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Calliper depth gauges; Design and metrological characteristics (ISO 13385-2:2011)
DIN EN ISO 13385-2:2013-06 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Calliper depth gauges; Design and metrological characteristics (ISO 13385-2:2011)
DIN EN ISO 11855-3:2015 Building environment design - Design, dimensioning, installation and control of embedded radiant heating and cooling systems - Part 3: Design and dimensioning (ISO 11855-3:2012); German version EN ISO 11855-3:2015
DIN EN ISO 12215-5:2019-06 Small craft - Hull construction and scantlings - Part 5: Design pressures for monohulls, design stresses, scantlings determination (ISO 12215-5:2008, including Amd 1:2014)
DIN EN ISO 13385-2:2019-06 Draft Document - Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Calliper depth gauges; Design and metrological characteristics (ISO/DIS 13385-2:2019); German and English version prEN ISO 13385-2:2019
DIN EN ISO 13385-1:2017-10 Draft Document - Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Callipers; Design and metrological characteristics (ISO/DIS 13385-1:2017); German and English version prEN ISO 13385-1:2017
DIN EN ISO 7250-1:2010-06 Basic human body measurements for technological design - Part 1: Body measurement definitions and landmarks (ISO 7250-1:2008)
DIN EN ISO 3611:2023 Geometrical product specifications (GPS) - Dimensional measuring equipment - Design and metrological characteristics of micrometers for external measurements (ISO 3611:2023); German and English version EN ISO 3611:2023
DIN EN ISO 13385-1 E:2017 Draft Document - Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Callipers; Design and metrological characteristics (ISO/DIS 13385-1:2017); German and English version prEN ISO 13385-1:2017
DIN EN ISO 3611:2024-09 Geometrical product specifications (GPS) - Dimensional measuring equipment - Design and metrological characteristics of micrometers for external measurements (ISO 3611:2023)
DIN 7900:1997-03 Playing field equipment - Football goals - Design dimensions
DIN 7900:1997 Playing field equipment - Football goals - Design dimensions
DIN EN ISO 13385-2:2013 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Calliper depth gauges; Design and metrological characteristics (ISO 13385-2:2011); German version EN ISO 13385-2:2011
DIN EN ISO 3611:2022-06 Geometrical product specifications (GPS) - Dimensional measuring equipment: Micrometers for external measurements - Design and metrological characteristics (ISO/DIS 3611:2022); German and English version prEN ISO 3611:2022 / Note: Date of issue 2022-05...
DIN 4242:1979-01 Glass block walls; construction and dimensioning
DIN EN ISO 5059-1:2024-02 Geometrical product specifications (GPS) - Dimensional measuring equipment: inside micrometers - Part 1: Two-point inside micrometers - Design and metrological characteristics (ISO/DIS 5059-1:2024); German and English version prEN ISO 5059-1:2024 / Not...
DIN 21500:2017 Shaft sinking in mining - design and dimensioning
DIN EN ISO 13385-2 E:2019 Draft Document - Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Calliper depth gauges; Design and metrological characteristics (ISO/DIS 13385-2:2019); German and English version prEN ISO 13385-2:2019
DIN EN ISO 13225 E:2010-08 Draft Document - Geometrical product specifications (GPS) - Dimensional measuring instruments: Height gauges - Design and metrological characteristics (ISO/DIS 13225:2010); German version prEN ISO 13225:2010
DIN EN ISO 13385-2:2011 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Calliper depth gauges; Design and metrological characteristics (ISO 13385-2:2011); German version EN ISO 13385-2:2011
DIN 21500:2001 Shaft sinking in mining - Design and dimensioning
DIN EN ISO 12215-5:2019 Small craft – Hull construction and sizing – Part 5: Monohull design pressures, design stresses, sizing determination
DIN 3417:1998-05 Metallic slide fasteners - Design types, dimensions, materials
DIN EN ISO 5059-1 E:2024 Draft Document - Geometrical product specifications (GPS) - Dimensional measuring equipment: inside micrometers - Part 1: Two-point inside micrometers - Design and metrological characteristics (ISO/DIS 5059-1:2024); German and English version prEN ISO ...
DIN EN ISO 12215-5:2020-03 Small craft - Hull construction and scantlings - Part 5: Design pressures for monohulls, design stresses, scantlings determination (ISO 12215-5:2019); German version EN ISO 12215-5:2019
DIN EN ISO 13385-1 E:2008-01 Draft Document - Geometrical product specifications (GPS) - Dimensional measuring equipments - Part 1: Callipers; Design and metrological requirements (ISO/DIS 13385-1.2:2007); German version prEN ISO 13385-1.2:2007
DIN EN ISO 5059-1 E:2024-02 Draft Document - Geometrical product specifications (GPS) - Dimensional measuring equipment: inside micrometers - Part 1: Two-point inside micrometers - Design and metrological characteristics (ISO/DIS 5059-1:2024); German and English version prEN ISO ...
DIN EN ISO 1938-1:2016 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Plain limit gauges of linear size (ISO 1938-1:2015); German version EN ISO 1938-1:2015
DIN 20560:1989 Mine cars; middle size; dimensions, design and construction
DIN EN ISO 12215-5:2014 Small craft - Hull construction and scantlings - Part 5: Design pressures for monohulls, design stresses, scantlings determination (ISO 12215-5:2008 + Amd 1:2014); German version EN ISO 12215-5:2008 + A1:2014
DIN EN ISO 5059-1:2025-11 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Design and metrological characteristics of two-point inside micrometers (ISO 5059-1:2025)
DIN 20570:1989 Mine cars; large size; dimensions, design and construction
DIN EN ISO 3611:2011 Geometrical product specifications (GPS) - Dimensional measuring equipment: Micrometers for external measurements - Design and metrological characteristics (ISO 3611:2010); German version EN ISO 3611:2010
DIN EN ISO 11064-4:2004 Ergonomic design of control centers – Part 4: Design and dimensions of workstations (ISO 11064-4:2004); German version EN ISO 11064-4:2004
DIN 18057:2005-08 Concrete windows - Dimensioning, requirements, tests

Lithuanian Standards Office

LST EN ISO 12215-5:2008 Small craft - Hull construction and scantlings - Part 5: Design pressures for monohulls, design stresses, scantlings determination (ISO 12215-5:2008)
LST EN ISO 13385-1:2011 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Callipers; Design and metrological characteristics (ISO 13385-1:2011)
LST EN ISO 13225:2012 Geometrical product specifications (GPS) - Dimensional measuring equipment; Height gauges - Design and metrological characteristics (ISO 13225:2012)
LST EN ISO 13385-2:2011 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Calliper depth gauges; Design and metrological characteristics (ISO 13385-2:2011)
LST EN ISO 3611:2011 Geometrical product specifications (GPS) - Dimensional measuring equipment: Micrometers for external measurements - Design and metrological characteristics (ISO 3611:2010)
LST EN ISO 13102:2012 Geometrical product specifications (GPS) - Dimensional measuring equipment: Electronic digital-indicator gauge - Design and metrological characteristics (ISO 13102:2012)
LST EN ISO 463:2006 Geometrical Product Specifications (GPS) - Dimensional measuring equipment - Design and metrological characteristics of mechanical dial gauges (ISO 463:2006)
LST ISO 3055:1999 Kitchen equipment. Coordinating sizes (equivalent ISO 3055:1985)

Swedish Institute for Standards

SS-EN ISO 11855-3:2015 Building environment design - Design, dimensioning, installation and control of embedded radiant heating and cooling systems - Part 3: Design and dimensioning (ISO 11855-3:2012)
SS-EN ISO 12215-5:2008 Small craft - Hull construction and scantlings - Part 5: Design pressures for monohulls, design stresses, scantling determination (ISO 12215-5:2008)
SS-EN ISO 3611:2023 Geometrical product specifications (GPS) - Dimensional measuring equipment - Design and metrological characteristics of micrometers for external measurements (ISO 3611:2023)
SS-EN ISO 13385-2:2020 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Design and metrological characteristics of calliper depth gauges (ISO 13385-2:2020)
SS-EN ISO 13385-1:2019 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Design and metrological characteristics of callipers (ISO 13385-1:2019)
SS-EN ISO 13225:2012 Geometrical product specifications (GPS) - Dimensional measuring equipment; Height gauges - Design and metrological characteristics (ISO 13225:2012)
SIS SMS 960-1973 Mould bases. Dimensions for plates. Guide I i nes for design
SIS SS 91 42 21-1988 Building design — Housing — Functional sizes
SS 914221:2006 Building design - Housing - Interior dimensions
SIS SS 91 42 21-1989 Building design — Housing — Functional sizes
SS 914221:1994 Building design - Housing - Furnishing sizes
SS-EN ISO 13102:2012 Geometrical product specifications (GPS) - Dimensional measuring equipment: Electronic digital-indicator gauge - Design and metrological characteristics (ISO 13102:2012)
SS 364510:2025 Windows — Window sheets — Design, dimensions and materials

Gosstandart of Russia

GOST 16840-1978 Pinned wire. Design and dimensions
GOST 9036-1988 Solid-rolled wheels. Design and dimensions
GOST 14742-1969 Knurled handles. Design and sizes
GOST 17530-1972 Flanged cam arbors. Design and dimensions
GOST 17528-1972 Spindle cam arbors. Design and dimensions
GOST 12465-1967 Stop pins. Design and sizes
GOST 18369-1973 Cover handles for snap gauges. Desing and dimensions
GOST 16210-1977 Railway rails type P75. Design and dimensions
GOST 7722-1977 Cylindrical hands reamers. Design and dimensions
GOST 16211-1970 Centre cone arbors. Design and dimensions
GOST 12774-1967 Universal straps, strengvthened. Design and dimensions
GOST 13649-1979 Spring lugs for the wrist watch cases. Design and sizes
GOST 16212-1970 Cylindrical centre arbors. Design and dimensions

European Committee for Standardization (CEN)

EN ISO 11855-3:2015 Building environment design - Design@ dimensioning@ installation and control of embedded radiant heating and cooling systems - Part 3: Design and dimensioning
FprEN ISO 3611 Geometrical product specifications (GPS) - Dimensional measuring equipment - Design and metrological characteristics of micrometers for external measurements (ISO/FDIS 3611:2023)
prEN ISO 5059-1 Geometrical product specifications (GPS) - Dimensional measuring equipment: inside micrometers - Part 1: Two-point inside micrometers - Design and metrological characteristics (ISO/DIS 5059-1:2023)
EN ISO 11855-3:2021 Building environment design - Embedded radiant heating and cooling systems - Part 3: Design and dimensioning (ISO 11855-3:2021)

Standards Norway

NS-EN ISO 12215-5:2008 Small craft - Hull construction and scantlings - Part 5: Design pressures for monohulls, design stresses, scantlings determination (ISO 12215-5:2008)
NS-EN ISO 3611:2010 Geometrical product specifications (GPS) — Dimensional measuring equipment: Micrometers for external measurements — Design and metrological characteristics (ISO 3611:2010)
NS-EN ISO 11855-3:2015 Building environment design - Design, dimensioning, installation and control of embedded radiant heating and cooling systems - Part 3: Design and dimensioning (ISO 11855-3:2012)
NS-EN ISO 13385-1:2019 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Design and metrological characteristics of callipers (ISO 13385-1:2019)
NS-EN ISO 3611:2023 Geometrical product specifications (GPS) - Dimensional measuring equipment - Design and metrological characteristics of micrometers for external measurements (ISO 3611:2023)
NS-EN ISO 13225:2012 Geometrical product specifications (GPS) — Dimensional measuring equipment; Height gauges — Design and metrological characteristics (ISO 13225:2012)
NS-EN ISO 12215-5:2018 Small craft - Hull construction and scantlings - Part 5: Design pressures for monohulls, design stresses, scantlings determination (ISO 12215-5:2008, including Amd 1:2014)
NS-EN ISO 12215-5:2019 Small craft - Hull construction and scantlings - Part 5: Design pressures for monohulls, design stresses, scantlings determination (ISO 12215-5:2019, Corrected version 2024-03)
NS-EN ISO 13385-2:2011 Geometrical product specifications (GPS) — Dimensional measuring equipment — Part 2: Calliper depth gauges; Design and metrological characteristics (ISO 13385-2:2011)
NS-EN ISO 13385-2:2020 Geometrical product specifications (GPS) — Dimensional measuring equipment — Part 2: Design and metrological characteristics of calliper depth gauges (ISO 13385-2:2020)
NS-EN ISO 13102:2012 Geometrical product specifications (GPS) — Dimensional measuring equipment: Electronic digital-indicator gauge — Design and metrological characteristics (ISO 13102:2012)
NS-EN ISO 11855-3:2021 Building environment design – Embedded radiant heating and cooling systems – Part 3: Design and dimensioning (ISO 11855-3:2021)

Danish Standards Foundation

DANSK DS/EN ISO 12215-5:2019 Small craft – Hull construction and scantlings – Part 5: Design pressures for monohulls, design stresses, scantlings determination (ISO 12215-5:2019)
DANSK DS/EN ISO 11855-3:2015 Building environment design – Design, dimensioning, installation and control of embedded radiant heating and cooling systems – Part 3: Design and dimensioning (ISO 11855-3:2012)
DANSK DS/EN ISO 13385-1:2019 Geometrical product specifications (GPS) – Dimensional measuring equipment – Part 1: Design and metrological characteristics of callipers (ISO 13385-1:2019)
DANSK DS/EN ISO 13385-2:2020 Geometrical product specifications (GPS) – Dimensional measuring equipment – Part 2: Design and metrological characteristics of calliper depth gauges (ISO 13385-2:2020)
DS/EN ISO 12215-5:2008 Small craft - Hull construction and scantlings - Part 5: Design pressures for monohulls, design stresses, scantlings determination
DANSK DS/EN ISO 12215-5/A1:2008 Small craft – Hull construction and scantlings – Part 5: Design pressures for monohulls, design stresses, scantlings determination
DANSK DS/ISO 12215-5:2019 Small craft – Hull construction and scantlings – Part 5: Design pressures for monohulls, design stresses, scantlings determination

Finnish Standards Institute

SFS-EN ISO 13385-1:2019 Geometrical product specifications (GPS). Dimensional measuring equipment. Part 1: Design and metrological characteristics of callipers (ISO 13385-1:2019)
SFS-EN ISO 3611:2023 Geometrical product specifications (GPS). Dimensional measuring equipment. Design and metrological characteristics of micrometers for external measurements (ISO 3611:2023)
SFS-EN ISO 13385-2:2020 Geometrical product specifications (GPS). Dimensional measuring equipment. Part 2: Design and metrological characteristics of calliper depth gauges (ISO 13385-2:2020)

Bureau of Indian Standards

IS 4218 Pt.3-1976 ISO Metric Threads Part III Basic Dimensions of Design Profiles
IS 11698-2-2004 Iso Miniature Screw Threads-2 Basic Dimensions For Design Profiles (First Revision)
IS 18265-2023 Timekeeping Instruments —— Crowns and Sealed Tubes —— Designs and Dimensions

U.S. Military Regulations and Norms

ARMY MIL-HDBK-204A-1990 DESIGN OF INSPECTION EQUIPMENT FOR DIMENSIONAL CHARACTERISTICS
ARMY MIL-HDBK-204 A NOTICE 1-2013 DESIGN OF INSPECTION EQUIPMENT FOR DIMENSIONAL CHARACTERISTICS
ARMY MIL-HDBK-682-1991 TOLERANCING, DIMENSIONING, AND GAGING TECHNIQUES FOR THE DESIGN OF INSPECTION EQUIPMENT
ARMY MIL-HDBK-682 VALID NOTICE 1-2004 TOLERANCING, DIMENSIONING, AND GAGING TECHNIQUES FOR THE DESIGN OF INSPECTION EQUIPMENT
ARMY MIL-STD-408 A NOTICE 1-1961 BRUSHES, ELECTRICAL CONTACT, RECTANGULAR, STANDARD DESIGNS AND DIMENSIONS FOR

Polski Komitet Normalizacyjny (PKN)

PN-EN ISO 13385-2-2020-10 E Geometrical product specifications (GPS) -- Dimensional measuring equipment -- Part 2: Design and metrological characteristics of calliper depth gauges (ISO 13385-2:2020)

National Standardisation Body (ASRO)

STAS 7639-1980 Machine-tools OIL GAUGES Dimensions
STAS 6112-1989 TAPERED ROLLER THURST BEARINGS General plan of dimensions

COMMISSION FOR THE STANDARDS, METROLOGY AND QUALITY OF VIETNAM (STAMEQ)

TCVN 50-1986 Countersunk head screws.Design and dimensions
TCVN 52-1986 Cheese head screws.Designs and dimensions
TCVN 51-1986 Raised countersunk head screws.Design and dimensions
TCVN 49-1986 Mushroom head screws.Design and dimensions
TCVN 54-1986 Hexagon socket headcap screws.Design and dimensions

British Standards Institution (BSI)

13/30239224 DC BS EN ISO 9173-3. Dentistry. Extraction forceps. Part 3. Design and dimensions
BS 4467:1991(2012) Guide to Dimensions in designing for elderly people
BS EN ISO 12215-5:2018 Small craft. Hull construction and scantlings-Design pressures for monohulls, design stresses, scantlings determination
BS EN ISO 12215-5:2008+A1:2014 Small craft. Hull construction and scantlings-Design pressures for monohulls, design stresses, scantlings determination
BS 4467:1991 Guide to dimensions in designing for elderly people
BS EN ISO 11855-3:2015 Building environment design. Design, dimensioning, installation and control of embedded radiant heating and cooling systems. Design and dimensioning
22/30398242 DC BS ISO 3611. Geometrical product specifications (GPS). Dimensional measuring equipment: Micrometers for external measurements. Design and metrological characteristics
26/30500398 DC BS EN ISO 463 Geometrical product specifications (GPS) — Dimensional measuring equipment — Design and metrological characteristics of indicators
BS EN ISO 12215-5:2019 Small craft. Hull construction and scantlings - Design pressures for monohulls, design stresses, scantlings determination
20/30420627 DC BS ISO 3055. Kitchen equipment. Coordinating sizes
24/30448290 DC BS ISO 5059-1 Geometrical product specifications (GPS) - Dimensional measuring equipment: inside micrometers. Part 1: Two-point inside micrometers. Design and metrological characteristics
08/30180227 DC BS EN ISO 3611. Geometrical product specifications (GPS). Dimensional measuring instruments. Micrometers for external measurements. Design and metrological characteristics
BS EN ISO 13385-1:2019 Geometrical product specifications (GPS). Dimensional measuring equipment - Design and metrological characteristics of callipers
BS EN ISO 13385-1:2011 Geometrical product specifications (GPS). Dimensional measuring equipment. Callipers. Design and metrological characteristics
09/30198186 DC BS ISO 13102. Geometrical product specifications (GPS). Dimensional measuring equipment: Electronic digital indicator. Design and metrological characteristics

Society of Automotive Engineers (SAE)

SAE AS4330A TUBING, FLARED, STANDARD DIMENSIONS FOR, DESIGN STANDARD
SAE AS4330A-2014 TUBING, FLARED, STANDARD DIMENSIONS FOR, DESIGN STANDARD
SAE MA2110A-2015 PORT, RING LOCKED DESIGN STANDARD DIMENSIONS FOR
SAE MA2110-1985 PORT, RING LOCKED DESIGN STANDARD DIMENSIONS FOR
SAE AS4330 Tubing, Flared Standard Dimensions For, Design Standard
SAE MA2110A Port, Ring Locked Design Standard Dimensions For
SAE MA2110 Port, Ring Locked, Design Standard, Dimensions For
SAE AS4325-1993 Fitting End, Conical, Standard Dimensions for, Design Standard
SAE AS4330-1993 TUBING, FLARED, STANDARD DIMENSIONS FOR, DESIGN STANDARD FSC 4730
SAE AS4330-2005 TUBING, FLARED, STANDARD, DIMENSIONS FOR, DESIGN STANDARD

Korean Agency for Technology and Standards (KATS)

KS V ISO 12215-5-2014(2019) Small craft — Hull construction and scantlings — Part 5: Design pressures for monohulls, design stresses, scantlings determination
KS V ISO 12215-5:2014 Small craft — Hull construction and scantlings — Part 5: Design pressures for monohulls, design stresses, scantlings determination
KS B ISO 10552-2013 Timekeeping instruments－Crowns and sealed tubes－Designs and dimensions
KS V ISO 12215-5:2022 Small craft — Hull construction and scantlings — Part 5: Design pressures, design stresses and scantlings determination for monohulls
KS V ISO 12215-5-2022 Small craft — Hull construction and scantlings — Part 5: Design pressures, design stresses and scantlings determination for monohulls
KS B ISO 10552:2002 Timekeeping instruments-Crowns and sealed tubes-Designs and dimensions

Deutsche Vereinigung für Wasserwirtschaft, Abwasser und Abfall e. V. (DWA)

DWA-A 904 E:2014-05 Guidelines for the Design and Sizing of Rural Roads (RLW)

North Atlantic Treaty Organization Standards Agency

STANAG 3639-2004 AIRCREW STATION DIMENSIONAL DESIGN FACTORS

Association of German Mechanical Engineers

VDI 2073 Erlaeuterungen-2004 Design and pressure drop calculation for two-pipe systems
VDI 5586 Blatt 2-2022 In-plant milk-run systems Planning and dimensioning

International Organization for Standardization (ISO)

ISO 12215-5:2019 Small craft — Hull construction and scantlings — Part 5: Design pressures for monohulls, design stresses, scantlings determination
ISO 10552:2012 Timekeeping instruments - Crowns and sealed tubes - Designs and dimensions
ISO 10552:2014 Timekeeping instruments - Crowns and sealed tubes - Designs and dimensions
ISO 10552:1999 Timekeeping instruments - Crowns and sealed tubes - Designs and dimensions
ISO 11855-3:2021 Building environment design — Design, dimensioning, installation and control of embedded radiant heating and cooling systems — Part 3: Design and dimensioning
ISO 11855-3:2012 Building environment design - Design, dimensioning, installation and control of embedded radiant heating and cooling systems - Part 3: Design and dimensioning

Netherlands Institute for Standardization

NEN 1718-1982 Rollcontainers - Design, dimensions and mechanicalrequirements

GCC Standardization Organization

GSO 2771:2024 Energy Efficiency Label for Electrical Appliances – design and dimensions
BH GSO 2771:2024 Energy Efficiency Label for Electrical Appliances – design and dimensions
OS GSO 2771:2024 Energy Efficiency Label for Electrical Appliances – design and dimensions

Czech Standards Institute (UNMZ)

CSN 13 7675-1984 Machine screwing. Design and basic dimensions
CSN ISO 5457:1994 Technical drawings.Sizes and layout of drawing sheets

Association Francaise de Normalisation

NF J95-046-5*NF EN ISO 12215-5:2019 Small craft - Hull construction and scantlings - Part 5 : design pressures for monohulls, design stresses, scantlings determination

Ente Nazionale Italiano di Unificazione

UNI EN ISO 12215-5:2018 Small craft - Hull construction and scantlings - Part 5: Design pressures for monohulls, design stresses, scantlings determination
UNI EN ISO 12215-5:2008 Small craft - Hull construction and scantlings - Part 5: Design pressures for monohulls, design stresses, scantlings determination
UNI EN ISO 12215-5:2014 Small craft - Hull construction and scantlings - Part 5: Design pressures for monohulls, design stresses, scantlings determination
EC 1-2019 UNI EN ISO 12215-5:2019 Small craft - Hull construction and scantlings - Part 5: Design pressures for monohulls, design stresses, scantlings determination
UNI EN ISO 12215-5:2019 Small craft - Hull construction and scantlings - Part 5: Design pressures for monohulls, design stresses, scantlings determination
EC 3-2024 UNI EN ISO 12215-5:2019 Small craft - Hull construction and scantlings - Part 5: Design pressures for monohulls, design stresses, scantlings determination
EC 2-2024 UNI EN ISO 12215-5:2019 Small craft - Hull construction and scantlings - Part 5: Design pressures for monohulls, design stresses, scantlings determination

State Committee for Standardization of the Republic of Belarus

STB 1902-2008 Metal thread bushings. Design and dimensions
STB 1844-2008 Metal nonthread bushings. Design and dimensions

Yugoslav Association for Standardization

JUS Z.S2.323-2004 Road signs Direction signs for organizations Shape and sizes

Magyar Szabványügyi Testület

MNOSZ 15899-1953 Industrial water area architectural design. Main dimensions

South African Bureau of Standard

SANS 12215-5:2009 Small craft - Hull construction and scantlings Part 5: Design pressures for monohulls, design stresses, scantlings determination

Indonesia Standards

SNI ISO 13385-1:2019 Spesifikasi produk geometris — Alat ukur dimensi — Bagian 1: Desain dan karakteristik metrologis jangka sorong (ISO 13385-1:2019, IDT)

The Directorate General of Specifications and Metrology (DGSM)

OS GSO ISO 10552:2015 Timekeeping instruments -- Crowns and sealed tubes -- Designs and dimensions
OS GSO ISO 11855-3:2015 Building environment design -- Design, dimensioning, installation and control of embedded radiant heating and cooling systems -- Part 3: Design and dimensioning

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO ISO 10552:2016 Timekeeping instruments -- Crowns and sealed tubes -- Designs and dimensions
BH GSO ISO 11855-3:2017 Building environment design -- Design, dimensioning, installation and control of embedded radiant heating and cooling systems -- Part 3: Design and dimensioning