Indirect Bandgap UV
Indirect Bandgap UV, Total:58 items.
The international standard classification for "Indirect Bandgap UV" includes: Braking systems , Textiles in general , Chemical analysis of metals .
The Chinese standard classification for "Indirect Bandgap UV" includes: Braking system , Braking system , Textile articles in general , Metal nondestructive testing method , Metal physical property test method .
Professional Standard - Railway
- TB/T 1849-1987 Insulation Clearance for Contact Network in Tunnel
Professional Standard - Chemical Industry
- HG/T 4735-2014 Textile dyeing and finishing auxiliaries-Ultraviolet resistant finishing agent-Evaluation for solar ultraviolet radiation protective properties
Professional Standard - Urban Construction
- CJ/T 242-2007 External Automatic Brake Adjuster of City Bus
Group Standards of the People's Republic of China
- T/CSA 073-2021 Performance requirements on indoor ultraviolet LED mosquito light trap
- T/ZZB 0516-2018 External automatic slack adjuster of air brake
- T/GDCKCJH 049-2021 Performance requirements and test methods for ultraviolet energy meter
- T/GDAQI 009-2019 Multi-function testing instrument for escalator safety clearance
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China
- GB/T 1557-2006 The method of determining interstitial oxygen content in silicon by infrared absorption
- GB/T 1557-1989 The method of determining interstitial oxygen content in silicon by infrared absorption
- GB/T 18830-2009 Textiles—Evaluation for solar ultraviolet radiation protective properties
- GB/T 18830-2002 Textiles-Evaluation for solar ultraviolet radiation protective properties
- GB/T 14143-1993 300～900μm Silicon slices－Measuring of interstitial oxygen content－Infrared absorption method
Taiwan Provincial Standard of the People's Republic of China
- CNS 15001-2006 Assessment of solar ultraviolet protective fabrics
Society of Automotive Engineers (SAE)
- SAE J1513-2021 External Automatic Slack Adjuster Performance Requirements
- SAE J1513-2010 External Automatic Slack Adjuster Performance Requirements
- SAE J1462-1994 External Automatic Slack Adjuster Test Procedure
- SAE J1513-1994 (R) External Automatic Slack Adjuster Performance Requirements, Recommended Practice May 1994
- SAE J1512-2014 Manual Slack Adjuster Performance Requirements
- SAE J1512-2008 Manual Slack Adjuster Performance Requirements
- SAE J1512-2002 Manual Slack Adjuster Performance Requirements
- SAE J1512-1985 Manual Slack Adjuster Performance Requirements
Indonesia Standards
- SNI 04-3586-1994 Power transformator Part 3.1: Insulation level and dielectric test external clearances in air
Spanish Association for Standardization (UNE)
- UNE 16310:1975 EXTERNAL CYLINDRICAL GRINDING PLAIN WHEELS WITH SINGLE GAPING. TYPE 5.
- UNE 16309:1975 EXTERNAL CYLINDRICAL GRINDING PLAIN WHEELS WITHOUT GAPING. TYPE 1.
- UNE 16311:1975 EXTERNAL CYLINDRICAL GRINDING PLAIN WHEELS WITH TWO GAPINGS. TUPE 7.
- UNE 53-623 Pt.6-1989 Determination of the deformation properties of joint sealing materials between construction components after being exposed to ultraviolet irradiation under glass
SCC
- AWWA WQTC58922 A Technique for Direct Measurement of UV Fluence Distribution
- DANSK DS/ISO 4755:1984 Fastening elements. Thread clearance. External ISO metric thread
- AWWA WQTC58791 Benchmarking UV Collimated Beam Testing: Inter-laboratory Comparison of the UV Sensitivity of MS2 Coliphage
- AWWA WQTC58924 The Effects of Power Quality on UV Disinfection: Will it Kill UV Disinfection?
- AWWA ACE61700 Field Performance of UV Sensor Systems Used with Drinking Water UV Disinfection Systems
- AWWA ACE65434 Energy Efficiency for UV Treatment Facilities
- AWWA WQTC52871 UV Disinfection of C. parvum Oocysts in a Batch Reactor
- AWWA MTC50235 UV Disinfectability of Membrane Treated Wastewater
- AWWA WQTC63975 Field Performance of Drinking Water UV Systems
American Welding Society (AWS)
- WRC 323:1987 Monograph on Narrow-Gap Welding Technology
WRC - Welding Research Council
- BULLETIN 323-1987 MONOGRAPH ON NARROW-GAP WELDING TECHNOLOGY
SAE - SAE International
- SAE J1462-1987 Automatic Slack Adjuster Test Procedure
- SAE J1462-1985 Automatic Slack Adjuster Test Procedure
US-FCR
- FCR COE ER 385-1-31-1994 CONTROL OF HAZARDOUS ENERGY (SAFE CLEARANCE)
American Society for Testing and Materials (ASTM)
- ASTM F3582-22 Standard Test Method for Exoskeleton Use: Gaps
- ASTM D3732-82(2005) Standard Practice for Reporting Cure Times of Ultraviolet-Cured Coatings
Association Francaise de Normalisation
- NF E22-336-2*NF ISO 5753-2:2011 Rolling bearings - Internal clearance - Part 2 : axial internal clearance for four-point-contact ball bearings
- NF L90-200-70-06*NF EN 16602-70-06:2015 Space product assurance - Particle and UV radiation testing for space materials
American National Standards Institute （ANSI)
- ANSI N13.12-2013 Surface and Volume Radioactivity Standards for Clearance
British Standards Institution (BSI)
- BS EN 60076-3:2001 Power transformers - Insulation levels, dielectric tests and external clearances in air
- BS ISO 5753-2:2011 Rolling bearings. Internal clearance. Axial internal clearance for four-point-contact ball bearings
CH-SNV
- SN 214 032/3-1985 Concentric terminals. Intermediate gap for aluminum round profile connections permanently located in humid, wet spaces or outdoors
- SNV 21701-1938 Quality Systems — Model for quality assurance in design/development, production,installation and servicing
- VSM 11858-1974 Hexagonal concentric terminal. Intermediate gap, suitable for aluminum flat profile connections permanently located in humid, humid spaces or outdoors
- SN 054 511/1-1985 Safety helmets for fire fighters part 1:General test specifications and requirements
GOST
- GOST R 70380-2022 Low-pressure germicidal ultraviolet lamps. Methods for measuring energy characteristics of ultraviolet radiation and electrical parameters
Korean Agency for Technology and Standards (KATS)
- KS B ISO 5753-2-2016(2021) Rolling bearings — Internal clearance — Part 2: Axial internal clearance for four-point-contact ball bearings
- KS B 5570-2017 Performance test for UV/Vis spectrophotometer
- KS B 5570-2022 Performance test for UV/Vis spectrophotometer
Japanese Industrial Standards Committee (JISC)
- JIS B 1520-2:2015 Rolling bearings -- Internal clearance -- Part 2: Axial internal clearance for four-point-contact ball bearings
(U.S.) Ford Automotive Standards
- FORD FLTM AI 103-02-2000 UVA RETENTION IN CLEARCOATS
Standard Association of Australia （SAA）
- AS C329:1961 Method for the measurement of voltage with sphere-gaps (one sphere earthed)
