Forging machining allowance
Forging machining allowance, Total:34 items.
The international standard classification for "Forging machining allowance" includes: Equipment for the metallurgical industry , Aircraft and space vehicles in general , Iron and steel forgings .
The Chinese standard classification for "Forging machining allowance" includes: Other power equipment , Cold processing technology , Forging and pressing .
Professional Standard - Ferrous Metallurgy
- YB/T 036.9-1992 General Technical Specifications for Manufacturing of Metallurgy Equipment - Machining Allowance and Tolerance for Free Forgings of Hydraulic Press
- YB/T 036.8-1992 General Technical Specifications for Manufacturing of Metallurgy Equipment - Machining Allowance and Tolerance for Free Forgings on Hammer
Professional Standard - Aerospace
- QJ 503-1989 Machining Allowance and Dimension Tolerance of Die Forgings on Hammer
- QJ 1630-1989 Machining allowance and dimensional deviation of free forgings on the hammer
Group Standards of the People's Republic of China
- T/CCMI 11-2021 Machining Allowance and Tolerance of Large Hot Rolled Ring Forgings
Professional Standard - Machinery
- JB/T 9179.1-1999 Machining allowance and tolerancd of open die forgings on hydraulic press - General requirements
- JB/T 9179.8-1999 Machining allowance and tolerancd of open die forgings on hydraulic press - Ring
- JB/T 9179.6-1999 Machining allowance and tolerancd of open die forgings on hydraulic press - Die block
- JB/T 9179.4-1999 Machining allowance and tolerancd of open die forgings on hydraulic press - Disk and punched hole
- JB/T 9179.5-1999 Machining allowance and tolerancd of open die forgings on hydraulic press - Short round shaft
- JB/T 9179.6-2013 Machining allowances tolerances of open die forgings on hydraulic press - Part 6: Die block
- JB/T 9179.3-2013 Machining allowances and tolerances of open die forgings on hydraulic press - Part 3: Stepped shaft
- JB/T 9179.5-2013 Machining allowances and tolerances of open die forgings on hydraulic press - Part 5: Short round shaft
- JB/T 9179.4-2013 Machining allowances and tolerances of open die forgings on hydraulic press - Part 4: Disk and punched hole
- JB/T 9179.3-1999 Machining allowance and tolerancd of open die forgings on hydraulic press - Stepped shaft
- JB/T 9179.7-1999 Machining allowance and tolerancd of open die forgings on hydraulic press - Cylinder
- JB/T 9179.2-1999 Machining allowance and tolerancd of open die forgings on hydraulic press - Round shaft，square shaft and rectangular cross-section
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China
- GB/T 15826.9-1995 Machining allowances and tolerances for steel open die forgings on hammer-Forging without machining
- GB/T 15826.6-1995 Machining allowances and tolerances for steel open die forgings on hammer-Shaft without steps
- GB/T 15826.7-1995 Machining allowances and tolerances for steel open die forgings on hammer-Shaft with steps
- GB/T 15826.4-1995 Machining allowances and tolerances for steel open die forgings on hammer-Rings
- GB/T 21469-2008 Machining allowances and tolerances for steel open die forgings on hammer - General requirement
- GB/T 15826.2-1995 Machining allowances and tolerances for steel open die forgings on hammer-Disks and columns
- GB/T 15826.8-1995 Machining allowances and tolerances for steel open die forgings on hammer-Single throw crankshaft
- GB/T 15826.3-1995 Machining allowances and tolerances for steel open die forgings on hammer-Disks with holes
- GB/T 21471-2008 Machining allowances and tolerances for steel open die forgings on hammer - Shafts
- GB/T 15826.1-1995 Machining allowances and tolerances for steel open die forgings on hammer-General requirements
- GB/T 15826.5-1995 Machining allowances and tolerances for steel open die forgings on hammer-Seamles cylinder hushings
Korean Agency for Technology and Standards (KATS)
- KS B 0435-2021 Machining allowance for open die forgings
- KS B 0435-2016(2021) Machining allowance for open die forgings
Japanese Industrial Standards Committee (JISC)
- JIS B 0418:1999 Machining allowance for open die forgings
- JIS B 0418:1985 Machining allowance for open die forgings
IN-BIS
- IS 10604 Pt.2-1983 Specifications for machining allowances and tolerances for open die steel forgings Part 2 High alloy steel forgings
Spanish Association for Standardization (UNE)
- UNE 36514:1984 STEEL FORGINGS MACHING ALLOWANCES AND TOLERANCES FOR FORGED BARS
Forging Tolerance,Forging Tolerance,Bearing forgings,Machining allowance for forgings,carbon steel forgings,Machining Allowance and Tolerance of Hydraulic Press Forgings,Forging tube,Forging billet,carbon steel forgings,Forging size,Ring Forgings,din forging,Forging allowance,Specification forgings,Forging machining allowance,Free forging machining allowance,Machining allowances and tolerances for free forgings,Forging machining allowance and,Machining allowance for forgings,Machining allowance of free forging
