The difference between measurement and detection

The difference between measurement and detection, Total:80 items.

The international standard classification for "The difference between measurement and detection" includes: .

The Chinese standard classification for "The difference between measurement and detection" includes: Other special automobiles .

Group Standards of the People's Republic of China

T/HNCAA 026-2021 Identification of measuring equipment metrological traceability requirements and confirmation of verification and calibration results

Professional Standard - Automobile

QC/T 22-1992 Measurement inspection vehicle

Professional Standard - Navy

HJB 449.12-2009 Verification regulation for torpedo testing equipments of H/YZQ-006.Part 12:Testing the power
HJB 324.20-2006 Introduced Russian submarine weapons test equipment metrology and verification regulations Part 20: кя2.702.118 Inspection measuring instrument

未注明发布机构

AGFW FW 215 A:2012-06 Requirements, application and testing of computing devices as components of heat metering equipment

German Institute for Standardization

DIN 25482-13 E:2000-06 Detection limit and decision threshold for ionizing radiation measurements - Part 13: Counting measurements on moving objects
DIN 25482-13:2003 Detection limit and decision threshold for ionizing radiation measurements - Part 13: Counting measurements on moving objects
DIN 25482-11:2003 Detection limit and decision threshold for ionizing radiation measurements - Part 11: Measurements using albedo dosimeters
DIN 25482-11 E:2000-03 Detection limit and decision threshold for ionizing radiation measurements - Part 11: Measurements using albedo dosimeters
DIN 25482-12:2003 Detection limit and decision threshold for ionizing radiation measurements - Part 12: Unfolding of spectra
DIN 32937:2006-07 Surveillance of measuring, testing and inspection equipment - Planning, management and use of measuring, testing and inspection equipment
DIN 32937:2006 Control of inspection, measuring and test equipment - Plan, manage and use of inspection, measuring and test equipments
DIN 25482-11:2003-02 Detection limit and decision threshold for ionizing radiation measurements - Part 11: Measurements using albedo dosimeters
DIN IEC/TS 62720:2018-04*DIN SPEC 42720:2018-04 Identification of units of measurement for computer-based processing (IEC/TS 62720:2017)
DIN IEC/TS 62720:2018*DIN SPEC 42720:2018 Identification of units of measurement for computer-based processing
DIN 25482-3:1993 Limit of detection and limit of decision for nuclear radiation measurements; measurement by use of linear analog ratemeters
DIN 55350-17:1988 Concepts in quality and statistics; concepts relating to quality inspection and test
DIN 25482-13:2003-02 Detection limit and decision threshold for ionizing radiation measurements - Part 13: Counting measurements on moving objects
DIN 55350-17:1988-08 Concepts in quality and statistics; concepts relating to quality inspection and test
DIN 25482-2:1992 Limit of detection and limit of decision for nuclear radiation measurements; counting spectrometric measurements, neglecting the influence of sample treatment
DIN EN 17477:2020-02 Draft Document - Algae and algae products - Identification of the biomass of micro-algae, macro-algae, cyanobacteria and/or Labyrinthulomycetes - Detection and identification with morphological and/or molecular methods; German and English version prEN ...
DIN 51900:2022-06 Testing of solid and liquid fuels - Determination of gross calorific value by the bomb calorimeter and calculation of net calorific value / Note: Date of issue 2022-05-06*Intended as replacement for DIN 51900-1 (2000-04), DIN 51900-1 Berichtigung 1 (20...
DIN EN 50470-1/AA:2018-11 Draft Document - Electricity metering equipment (a.c.) - Part 1: General requirements, tests and test conditions - Metering equipment (class indexes A, B and C); German and English version EN 50470-1:2006/FprAA:2018

Korean Agency for Technology and Standards (KATS)

KS C IEC 62056-61-2003(2018) Electricity metering - Data exchange for meter reading, type metering and load control - Part 61: Object recognition system
KS C IEC 62056-61-2003(2023) Electricity metering - Data exchange for meter reading, type metering and load control - Part 61: Object recognition system
KS A ISO 11929-2:2014 Determination of the detection limit and decision threshold for ionizing radiation measurements－Part 2：Fundamentals and application to counting measurements with the influence of sample treatment
KS A ISO 11929-2:2002 Determination of the detection limit and decision threshold for ionizing radiation measurements-Part 2:Fundamentals and application to counting measurements with the influence of sample treatment
KS A ISO 3951-5:2013 Sampling procedures for inspection by variables－Part 5：Sequential sampling plans indexed by acceptance quality limit(AQL) for inspection by variables(known standard deviation)

Magyar Szabványügyi Testület

MSZ 4720/3-1980 Concrete quality testing. Special attribute detection
MSZ 3635-1982 Fat preservative content report and measurement test
MNOSZ 12001-1956 Railway carriage design, products and inspection levels
MSZ 19357/1-1980 Solid state dosimeter. Concept testing of thermoluminescence dose

Association Francaise de Normalisation

FD X07-018:1997 Metrology. Company metrology. Data sheet for measuring, inspection and test equipment.
NF P94-401-1:2004 Geotechnical investigation and testing - Identification and classification of rock - Part 1 : identification and description.
NF C19-110*NF EN 62598:2013 Nuclear instrumentation - Constructional requirements and classification of radiometric gauges
NF C19-108*NF EN IEC 62327:2019 Radiation protection instrumentation - Hand-held instruments for the detection and identification of radionuclides and for the estimation of ambient dose equivalent rate from photon radiation

PL-PKN

PN M54700-1987 Time measurement instruments Assignation of accuracy class according to metrological properties

American Water Works Association (AWWA)

AWWA WQTC58879 A Rapid Method That Detects, Identifies, and Enumerates Viable Bacteria in the Environment
AWWA WQTC65824 Methods for Detecting, Identifying and Quantitating Free-Living Amebae in Water

RO-ASRO

STAS 11071/13-1978 Legal metrology BLOCK DIAGRAM OF HIERARCHY OF MEASURING INSTRUMENTS FOR ELECTRICAL POWER AND ENERGY
STAS 11071/2-1978 Legal metrology BLOCK DIAGRAM OF HIERARCHY F MEASURING INSTRUMENTS FOR FLUID VOLUMES
STAS 11071/5-1978 Legal metrology BLOCK DIAGRAM OF HIERARCHY OF MEASURING INSTRUMENTS FOR MASS
STAS 11071/11-1978 Legal metrology BLOCK DIAGRAMS OF HIERARCHY OF MEASURING INSTRUMENTS FOR ELECTRICAL TENSION
STAS 11071/12-1978 Legal metrology BLOCK DIAGRAM OF HIERARCHY OF MEASURING INSTRUMENTS FOR ELECTRICAL RKSISTANCF.|
STAS 11071/3-1981 Legal metrology LOCK DIAGRAM OF HIERARCHY OF MEASURING INSTRUMENTS FOR PLAN ANGLE
STAS 11071/16-1979 Legal metrology BLOCK DIAGRAM OF HIERARCHY OF MEASURING INSTRUMENTS FOR pH AQUEOUS SOLUTIONS

International Electrotechnical Commission (IEC)

IEC 62598:2011 Nuclear instrumentation - Constructional requirements and classification of radiometric gauges
IEC 62327:2017 Radiation protection instrumentation - Hand-held instruments for the detection and identification of radionuclides and for the estimation of ambient dose equivalent rate from photon radiation

GCC Standardization Organization

GSO ISO 14689-1:2009 Geotechnical investigation and testing – Identification and classification of rock - Part 1: Identification and description
GSO ISO 9308-3:2013 Water quality - Detection and enumeration of Escherichia coli and coliform bacteria - Part 3: Miniaturized method (Most Probable Number) for the detection and enumeration of E. coli in surface and waste water

British Standards Institution (BSI)

BS EN 62598:2013 Nuclear instrumentation. Constructional requirements and classification of radiometric gauges

Ente Nazionale Italiano di Unificazione

UNI 7010:1971 Measuring instruments. Gauges and check and setting gauges for ISO metric threads. Distintion signs, indications and check and their position on gauges and check and setting gauges.
UNI/TS 11291-4:2013 Gas measurement systems - Hourly based gas metering systems - Part 4: Requirements for meters with capacity more than 65 m3/h (Group G 40)
UNI/TS 11291-6:2013 Gas measurement systems - Hourly based gas metering systems - Part 6: Requirements for meters less than 10 m3/h (less than group G10)
UNI EN 17477:2021 Algae and algae products - Identification of the biomass of microalgae, macroalgae, cyanobacteria and Labyrinthulomycetes - Detection and identification with morphological and/or molecular methods

International Organization for Standardization (ISO)

ISO/TR 7250-2:2010 Basic human body measurements for technological design - Part 2: Statistical summaries of body measurements from individual ISO populations
ISO 3951-5:2006 Sampling procedures for inspection by variables - Part 5: Sequential sampling plans indexed by acceptance quality limit (AQL) for inspection by variables (known standard deviation)

European Committee for Standardization (CEN)

CEN ISO/TR 7250-2:2011 Basic human body measurements for technological design - Part 2: Statistical summaries of body measurements from individual ISO populations

Gosstandart of Russia

GOST R ISO 2859-4-2006 Statistical methods. Sampling procedures for inspection by attributes. Part 4. Assessment of declared quality level
GOST 33505-2015 Plant quarantine. Methods of detection and identification of Plum pox virus
GOST 31819.11-2012 Electricity metering equipment (a.c). Particular requirements. Part 11. Electromechanical meters for active energy (classes 0,5; 1 and 2)
GOST 31819.21-2012 Electricity metering equipment (a.c). Particular requirements. Part 21. Static meters for active energy (classes 1 and 2)
GOST 31819.22-2012 Electricity metering equipment (a.c.). Particular requirements. Part 22. Static meters for active energy classes (0,2S and 0,5S)
GOST R 56510-2015 Metrological assurance in the field of non-destructive testing
GOST 8.103-1973 State system for ensuring the uniformity of measurements. Organization and procedure for metrological examination of design and technological documentation
GOST 33539-2015 Plant quarantine. Methods of detection and identification of Potato virus T
GOST 33456-2015 Plant quarantine. Methods of detection and identification of white peach scale
GOST R ISO 3951-1-2007 Statistical methods. Sampling procedures for inspection by variables. Part 1. Specification for single sampling plans indexed by acceptance quality limit for lot-by-lot inspection for a single quality characteristic and a single AQL

Association of German Mechanical Engineers

VDI 3940 Blatt 1-2006 Measurement of odour impact by field inspection - Measurement of the impact frequency of recognizable odours - Grid measurement
VDI 3940 BLATT 2-2006 Determination of odor emissions by inspection — Determination of the frequency of emissions of recognizable odors — Plume measurement

American Society for Testing and Materials (ASTM)

ASTM RR-E54-1000 2014 E2677-Test Method for Estimating Limits of Detection in Trace Detectors for Explosives and Drugs of Interest

Association for Electrical, Electronic & Information Technologies (VDE)

VDE 0418-0-1-2007 Electricity metering equipment (a.c.) - Part 1: General requirements@ tests and test conditions - Metering equipment (class indexes A@ B and C); German version EN 50470-1:2006
VDE 0418-0-1-2019 Electricity metering equipment (a.c.) - Part 1: General requirements@ tests and test conditions - Metering equipment (class indexes A@ B and C); German version EN 50470-1:2006 + A1:2018
VDE 0418-0-1/AA-2018 Electricity metering equipment (a.c.) - Part 1: General requirements@ tests and test conditions - Metering equipment (class indexes A@ B and C); German and English version EN 50470-1:2006/FprAA:2018
VDE 0418-0-1 BERICHTIGUNG 1-2008 Electricity metering equipment (a.c.) - Part 1: General requirements@ tests and test conditions - Metering equipment (class indexes A@ B and C); German version EN 50470-1:2006@ Corrigendum to DIN EN 50470-1 (VDE 0418-0-1):2007-05
VDE 0418-8-21 AA E*DIN EN 62058-21 AA:2007-10 Electricity metering equipment (ac) - Acceptance inspection - Part 21: Particular requirements for electromechanical meters for active energy (classes 0.5, 1 and 2)

IT-UNI

UNSIDER 17-1956 Quality inspection. Comparison of two statistical series. The significance of the difference between two averages

Indonesia Standards

SNI 06-7129-2005 Test methods of chromium (IV) content in leather by spectrophotometers

Standards Norway

NS-EN 17477:2021 Algae and algae products – Identification of the biomass of microalgae, macroalgae, cyanobacteria and Labyrinthulomycetes – Detection and identification with morphological and/or molecular methods

Swedish Institute for Standards

SS-EN 17477:2021 Algae and algae products - Identification of the biomass of microalgae, macroalgae, cyanobacteria and Labyrinthulomycetes - Detection and identification with morphological and/or molecular methods

Others: The difference between measurement and detection