Hundred +5600

Hundred +5600, Total:148 items.

The international standard classification for "Hundred +5600" includes: Railway rolling stock , Trailing stock .

The Chinese standard classification for "Hundred +5600" includes: Railway vehicles in general , Railway trucks .

Taiwan Provincial Standard of the People's Republic of China

CNS 5600-1980 Toluene (Nitration Grade)

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 5600-1997 General technical specification for freight cars
GB/T 5600-2006 General technical specification for railway freight car
GB/T 5600-2018 General technical specification for railway freight car

Professional Standard - Energy and Power Planning

DL/T 5600-2021 Technical specification for risk assessment of subsynchronous resonance/oscillation of power system

Professional Standard - Light Industry

QB/T 5600-2021 Oral care and cleansing products —Determination of steviosides in toothpastes 一 High performance liquid chromatography

Professional Standard - Aviation

HB 5600-1980 Lightweight Fixed Single Tube Clamp

Professional Standard - Petroleum

SY/T 5600-2016 Technical specifications for operation of petroleum wireline logging
SY/T 5600-2002 The operating regulation of open hole and cased hole logging
SY/T 5600-2010 The Technical Specifications for Operation of Petroleum Wireline Logging

Professional Standard - Chemical Industry

HG/T 5600-2019 Cable wrap tape for bridge cable corrosion protection

Swedish Institute for Standards

SS-ISO 5600:2024 Rubber — Determination of adhesion to rigid materials using conical shaped parts (ISO 5600:2024, IDT)

Bureau of Indian Standards

IS 5600-2002 Pumps - Sewage and Drainage

International Organization for Standardization (ISO)

ISO 5600:1979 Rubber — Determination of adhesion to rigid materials using conical shaped parts
ISO 5600:1986 Rubber; Determination of adhesion to rigid materials using conical shaped parts
ISO 5600:2011 Rubber - Determination of adhesion to rigid materials using conical shaped parts
ISO 5600:2017 Rubber - Determination of adhesion to rigid materials using conical shaped parts
ISO 5600:2024 Rubber — Determination of adhesion to rigid materials using conical shaped parts
ISO 5600:2007 Rubber - Determination of adhesion to rigid materials using conical shaped parts
ISO/PRF 5600:2024 Rubber
ISO/DIS 5600:2023 Rubber — Determination of adhesion to rigid materials using conical shaped parts

BG-BDS

БДС 5600-1974

South African Bureau of Standard

SANS 5600:1978 Acute systemic toxicity of plastics for medical use

Standards Norway

NS 5600:1984 Grooved pulleys for classical and narrow V-belts — Sections Y, Z, A, B, C, D, E, SPZ, SPA, SPB and SPC (ISO 4183:1980 modified)
NS 5600-1984 Grooved pulleys for classical and narrow V-belts - Sections Y, Z, A, B, C, D, E, SPZ, SPA, SPB and SPC

Ente Nazionale Italiano di Unificazione

UNI 5600:1921
UNI ISO 5600:2009 Rubber - Determination of adhesion to rigid materials using conical shaped parts
UNI ISO 5600:2012 Rubber - Determination of adhesion to rigid materials using conical shaped parts
UNI ISO 5600:2017 Rubber -- Determination of adhesion to rigid materials using conical shaped parts

British Standards Institution (BSI)

BS ISO 5600:2011 Rubber. Determination of adhesion to rigid materials using conical shaped parts
BS ISO 5600:2024 Rubber. Determination of adhesion to rigid materials using conical shaped parts
BS ISO 5600:2017 Rubber. Determination of adhesion to rigid materials using conical shaped parts
BS ISO 5600:2007 Rubber. Determination of adhesion to rigid materials using conical shaped parts
BS 5600-3.3:1987 Powder metallurgical materials and products - Part 3. Methods of testing sintered metal materials and products, excluding hardmetals - Preparation of samples for chemical analysis for determination of carbon content
BS 5600-5.2:1988 Powder metallurgical materials and products. Material specifications for sintered metal products, excluding hardmetals. Sintered iron and sintered steel containing one or both of the elements carbon and copper, used for structural parts
BS 5600-1.2:1981 Powder metallurgical materials and products. General information-Glossary of terms
BS 5600-2.2.1:1989 Powder metallurgical materials and products. Methods of sampling and testing metallic powders. Determination of apparent density-Funnel method
BS 5600-4.17.1:1986 Powder metallurgical materials and products. Methods of testing and chemical analysis of hardmetals. Chemical analysis by flameatomic absorption spectrometry-General requirements
BS 5600-3.6:1988 Powder metallurgical materials and products - Methods of testing sintered metal materials and products, excluding hardmetals - Determination of fluid permeability
BS 5600-1.1:1979 Powder metallurgical materials and products - General information - Introduction and contents
BS 5600-2.2.3:1984 Powder metallurgical materials and products. Methods of sampling and testing metallic powders. Determination of apparent density-Oscillating funnel method
BS 5600-3.10:1979 Powder metallurgical materials and products. Methods of testing sintered metal materials and products, excluding hardmetals-Fatigue test pieces
BS 5600-3.7:1988 Powder metallurgical materials and products. Methods of testing sintered metal materials and products, excluding hardmetals-Tensile test pieces
BS 5600-2-2.5:1979 Powder metallurgical materials and products. Methods of sampling and testing metallic powders-Determination of green strength by transverse rupture of rectangular compacts
BS 5600-4-4.2:1979 Powder metallurgical materials and products. Methods of testing and chemical analysis of hardmetals-Determination of insoluble (free) carbon: gravimetric method
BS 5600-2.11:1980 Powder metallurgical materials and products. Methods of sampling and testing metallic powders-Determination of the lubricant content of lubricated metallic powders: Soxhlet extraction method
BS 5600-4.17.5:1986 Powder metallurgical materials and products. Methods of testing and chemical analysis of hardmetals. Chemical analysis by flameatomic absorption spectrometry-Determination of cobalt, iron, manganese, molybdenum, nickel, titanium and vanadium in content...
BS 5600-4.5:1979 Powder metallurgical materials and products. Methods of testing and chemical analysis of hardmetals-Rockwell hardness test (scale A)
BS 5600-4.17.2:1986 Powder metallurgical materials and products. Methods of testing and chemical analysis of hardmetals. Chemical analysis by flameatomic absorption spectrometry-Determination of calcium, potassium, magnesium and sodium in contents from 0.001 to 0.02% ($7I...
BS 5600-2.6:1985 Powder metallurgical materials and products. Methods of sampling and testing metallic powders-Determination of flowability by means of a calibrated funnel (Hall flowmeter)
BS 5600-3.8:1979 Powder metallurgical materials and products. Methods of testing sintered metal materials and products, excluding hardmetals-Determination of transverse rupture strength
BS 5600-3.2:1988 Powder metallurgical materials and products. Methods of testing sintered metal materials and products, excluding hardmetals-Determination of density, oil content and open porosity
BS 5600-5.1:1988 Powder metallurgical materials and products. Material specifications for sintered metal products, excluding hardmetals-Materials, for bearings, impregnated with liquid lubricant
BS 5600-4.17.3:1986 Powder metallurgical materials and products. Methods of testing and chemical analysis of hardmetals. Chemical analysis by flameatomic absorption spectrometry-Determination of cobalt, iron, manganese and nickel in contents from 0.01% to 0.5% ($7Im/m$7R)
BS 5600-4.17.4:1986 Powder metallurgical materials and products. Methods of testing and chemical analysis of hardmetals. Chemical analysis by flameatomic absorption spectrometry-Determination of molybdenum, titanium and vanadium in contents from 0.01% to 0.5% ($7Im/m$7R)
BS 5600-5.3:1988 Powder metallurgical materials and products. Material specifications for sintered metal products, excluding hardmetals. Sintered alloyed and sintered stainless steels used for structural parts
BS 5600-4.17.6:1986 Powder metallurgical materials and products. Methods of testing and chemical analysis of hardmetals. Chemical analysis by flameatomic absorption spectrometry-Determination of chromium in contents from 0.01% to 2% ($7Im/m$7R)
BS 5600-3.11.1:1991 Powder metallurgical materials and products. Methods of testing sintered metal material and products, excluding hard metals. Determination of apparent hardness.-Materials of essentially uniform section hardness
BS 5600-2.2.2:1984 Powder metallurgical materials and products. Methods of sampling and testing metallic powders. Determination of apparent density-Scott volumeter method
BS 5600-3.11.2:1984 Powder metallurgical materials and products. Methods of testing sintered metal materials and products, excluding hardmetals. Determination of apparent hardness.-Case-hardened ferrous materials, surface enriched by carbon or carbon and nitrogen
BS 5600-4.4:1979 Powder metallurgical materials and products. Methods of testing sintered metal materials and products, excluding hardmetals. Determination of density for impermeable sintered metal materials
BS 5600-2-2.7:1984 Powder metallurgical materials and products. Methods of sampling and testing metallic powders-Determination of dimensional changes associated with compacting and sintering, excluding powders for hardmetals
BS 5600-4-4.10:1980 Powder metallurgical materials and products. Methods of testing and chemical analysis of hardmetals-Determination of contents of metallic elements by X-ray fluorescence: solution method
BS 5600-4-4.1:1987 Powder metallurgical materials and products. Methods of testing and chemical analysis of hardmetals-Determination of total carbon: gravimetric method
BS 5600-4-4.3:1979 Powder metallurgical materials and products. Methods of testing and chemical analysis of hardmetals-Determination of cobalt: potentiometric method
BS 5600-2-2.8:1980 Powder metallurgical materials and products. Methods of sampling and testing metallic powders-Determination of loss of mass on hydrogen reduction (hydrogen loss)
BS 5600-2-2.10:1980 Powder metallurgical materials and products. Methods of sampling and testing metallic powders-Sampling and testing of hardmetal powders using sintered test pieces
BS 5600-4-4.1:1979 Powder metallurgical materials and products. Methods of testing and chemical analysis of hardmetals-Determination of total carbon: gravimetric method
BS 5600-3-3.1:1979 Powder metallurgical materials and products. Methods of testing sintered metal materials and products, excluding hardmetals-Determination of density for impermeable sintered metal materials
BS 5600-5-5.1:1981 Powder metallurgical materials and products. Material specifications for sintered metal products, excluding hardmetals.-Materials, for bearings, impregnated with liquid lubricant
BS 5600-4-4.7:1979 Powder metallurgical materials and products. Methods of testing and chemical analysis of hardmetals-Determination of Young's modulus
BS 5600-4-4.15:1980 Powder metallurgical materials and products. Methods of testing and chemical analysis of hardmetals-Determination of contents of metallic elements by X-ray fluorescence: fusion method
BS 5600-2-2.4:1988 Powder metallurgical materials and products. Methods of sampling and testing metallic powders-Determination of compressibility in uniaxial compression
BS 5600-4-4.2:1987 Powder metallurgical materials and products. Methods of testing and chemical analysis of hardmetals-Determination of insoluble (free) carbon: gravimetric method
BS 5600-3-3.9:1979 Powder metallurgical materials and products. Methods of testing sintered metal materials and products, excluding hardmetals-Determination of radial crushing strength for sintered metal bushes
BS 5600-2-2.4:1979 Powder metallurgical materials and products. Methods of sampling and testing metallic powders-Determination of compactibility (compressibility) in uniaxial compression excluding powders for hardmetals
BS 5600-4-4.13:1980 Powder metallurgical materials and products. Methods of testing and chemical analysis of hardmetals-Metallographic determination of microstructure
BS 5600-3-3.7:1979 Powder metallurgical materials and products. Methods of testing sintered metal materials and products, excluding hardmetals-Tensile test pieces
BS 5600-2-2.5:1988 Powder metallurgical materials and products. Methods of sampling and testing metallic powders-Determination of green strength by transverse rupture of rectangular compacts
BS 5600-4-4.8:1987 Powder metallurgical materials and products. Methods of testing and chemical analysis of hardmetals-Determination of transverse rupture strength
BS 5600-4-4.6:1979 Powder metallurgical materials and products. Methods of testing and chemical analysis of hardmetals-Vickers hardness test
BS 5600-4-4.6:1987 Powder metallurgical materials and products. Methods of testing and chemical analysis of hardmetals-Vickers hardness test

Society of Automotive Engineers (SAE)

SAE AMS5600A Steel, Corrosion-Resistant, Sheet, Laminated, Edge Bonded
SAE ARP5600 Disposition of Damaged Wheels Involved in Accidents/Incidents
SAE AMS5600 Steel, Corrosion-Resistant, Sheet, Laminated, Edge Bonded
SAE AMS5600D Steel, Corrosion Resistant, Sheet Laminated, Edge Bonded
SAE AMS5600B Steel, Corrosion-Resistant, Sheet, Laminated, Edge Bonded
SAE AMS5600A-1970 STEEL SHEET, CORROSION RESISTANT, LAMINATED, EDGE BONDED
SAE AMS5600E Steel, Corrosion-Resistant, Sheet, Laminated, Edge Bonded
SAE ARP5600-2020 Disposition of Damaged Wheels Involved in Accidents/Incidents
SAE AMS5600-1968 STEEL SHEET, CORROSION RESISTANT, LAMINATED, EDGE BONDED
SAE AMS5600F Steel, Corrosion-Resistant, Sheet, Laminated, Edge Bonded
SAE HS-5600-1997 SAE Agricultural Tractor and Related Standards Handbook IMAGES ARE NOT INCLUDED; PLEASE REFER TO GLOBAL
SAE AMS5600G Steel, Corrosion-Resistant, Sheet, Laminated, Edge Bonded
SAE AMS5600C Steel, Corrosion-Resistant, Sheet, Laminated, Edge Bonded
SAE ARP5600-2005 Disposition of Damaged Wheels Involved in Accidents/Incidents
SAE AMS5600D-1992 Steel, Corrosion Resistant, Sheet Laminated, Edge Bonded
SAE AMS5600D-2000 Steel, Corrosion Resistant, Sheet Laminated, Edge Bonded
SAE AMS5600C-2011 STEEL SHEET, CORROSION RESISTANT Laminated, Edge Bonded
SAE AMS5600E-2012 Steel, Corrosion-Resistant, Sheet Laminated, Edge Bonded
SAE AMS5600B-1981 STEEL SHEET, CORROSION RESISTANT Laminated, Edge Bonded
SAE AMS5600F-2019 Steel@ Corrosion-Resistant@ Sheet Laminated@ Edge Bonded (UNS S30200)
SAE AMS5600E-2007 Steel, Corrosion Resistant, Sheet Laminated, Edge Bonded UNS S30200
SAE AMS5600G-2024 Steel, Corrosion-Resistant, Sheet Laminated, Edge Bonded

Japanese Industrial Standards Committee (JISC)

JIS C 5600:2006 Glossary of basic terms used in electrotechnology
JIS C 5600:1977 Glossary of terms used in electronics and telecommunications (Basic terms)

IN-BIS

IS 5600-1970 Sewage and Drainage Pump Specifications

IT-UNI

UNI 5600-1965 An elevator group consisting of two clutch elevators. For private services. Load capacity, elevator car, stroke and machine room

Magyar Szabványügyi Testület

MSZ 5600-1981 High altitude electromagnetic pulse thread, string

CZ-CSN

CSN ON 12 5600-1966 Heat exchangers Common regulations
CSN 05 5600-1975 Soft solders
CSN 67 5600-1961 Grinding paste P 8100
CSN P 79 5600-2001 Footwear - Requirements and test methods

GCC Standardization Organization

GSO ISO 5600:2015 Rubber -- Determination of adhesion to rigid materials using conical shaped parts

SCC

FM Approvals 5600:2021 Clean Agent Extinguishing Systems

American Society for Testing and Materials (ASTM)

ASTM D5600-14 Standard Test Method for Trace Metals in Petroleum Coke by Inductively Coupled Plasma Atomic Emission Spectrometry 40;ICP-AES41;
ASTM D5600-09 Standard Test Method for Trace Metals in Petroleum Coke by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
ASTM D5600-22 Standard Test Method for Trace Metals in Petroleum Coke by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
ASTM D5600-98 Standard Test Method for Trace Metals in Petroleum Coke by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
ASTM D5600-17 Standard Test Method for Trace Metals in Petroleum Coke by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
ASTM D5600-04 Standard Test Method for Trace Metals in Petroleum Coke by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)

AIA/NAS - Aerospace Industries Association of America Inc.

NAS5600-5606-1994 Screw@ 100 Degree Head@ Tri-Slot Recess@ Alloy Steel@ Full Thread@ Self-Locking and Nonlocking (Rev 6)
NAS5600-5606-1986 Screw@ 100 Degree Head@ Tri-Wing Recess@ Alloy Steel@ Full Thread@ Self-Locking and Nonlocking (Rev 5)

Spanish Association for Standardization (UNE)

UNE-ISO 5600:2023 Rubber. Determination of adhesion to rigid materials using conical shaped parts

Aerospace Industries Association

AIA NAS5600-5606 Screw, 100 Degree Head, Tri-Slot Recess, Alloy Steel, Full Thread, Self-Locking and Nonlocking
AIA NAS 5600-1994 (Inactive)Screw, 100 Degree Head, Tri-Slot Recess, Alloy Steel, Full Thread, Self-Locking and Nonlocking (Rev. 6)
AIA NAS 5600-5606-1994 (Inactive)Screw, 100 Degree Head, Tri-Slot Recess, Alloy Steel, Full Thread, Self-Locking and Nonlocking Revision 6; FSC 5305

Korean Agency for Technology and Standards (KATS)

KS M ISO 5600:2015 Rubber－Determination of adhesion to rigid materials using conical shaped parts
KS M ISO 5600:2021 Rubber — Determination of adhesion to rigid materials using conical shaped parts
KS M ISO 5600:2010 Rubber-Determination of adhesion to rigid materials using conical shaped parts
KS M ISO 5600-2021 Rubber — Determination of adhesion to rigid materials using conical shaped parts

The Directorate General of Specifications and Metrology (DGSM)

OS GSO ISO 5600:2015 Rubber -- Determination of adhesion to rigid materials using conical shaped parts

Association of German Mechanical Engineers

VDI 5600 Blatt 2-2012 Manufacturing Execution Systems (MES) - Cost effectiveness
VDI 5600 Blatt 5-2014 Fertigungsmanagementsysteme (Manufacturing Execution Systems - MES) - Neue Optimierungsansaetze mit MES
VDI 5600 BLATT 6-2017 Fertigungsmanagementsysteme (Manufacturing Execution Systems - MES) - Energiemanagement mit MES
VDI 5600 BLATT 2-2013 Manufacturing Execution Systems (MES) — Economic Efficiency
VDI 5600 BLATT 4-2012 Manufacturing Execution Systems (MES) — Support of production systems through MES
VDI 5600 BLATT 3-2013 Manufacturing Execution Systems (MES) — Logical interfaces for machine and plant control
VDI 5600 Blatt 7-2021 Manufacturing Execution Systems (MES) Part 7: MES in the context of Industrie 4.0
VDI 5600 BLATT 4-2012 Manufacturing Execution Systems (MES) — Support of production systems through MES
VDI 5600 BLATT 6-2017 Fertigungsmanagementsysteme (Manufacturing Execution Systems - MES) - Energiemanagement mit MES
VDI 5600 BLATT 2-2013 Manufacturing Execution Systems (MES) — Economic Efficiency
VDI 5600 Blatt 3-2011 Manufacturing Execution Systems (MES) - Logic interfaces for machine and plant control
VDI 5600 BLATT 5-2015 Manufacturing Execution Systems (MES) — New optimization approaches with MES
VDI 5600 Blatt 1-2016 Manufacturing execution systems (MES)
VDI 5600 Blatt 4-2011 Fertigungsmanagementsysteme (Manufacturing Execution Systems - MES) - Unterstuetzung von Produktionssystemen durch MES
VDI 5600 BLATT 3-2013 Manufacturing Execution Systems (MES) — Logical interfaces for machine and plant control

Aerospace Industries Association/ANSI Aerospace Standards

AIA/NAS NAS 5600-1994 Screw, 100 Degree Head, Tri-Slot Recess, Alloy Steel, Full Thread, Self-Locking and Nonlocking (Rev. 6)