Proof of use of equipment

Proof of use of equipment, Total:98 items.

The international standard classification for "Proof of use of equipment" includes: .

The Chinese standard classification for "Proof of use of equipment" includes: .

Hebei Provincial Standard of the People's Republic of China

DB1311/T 055-2024 Rules for the Administration of the Use of Geographical Indication Certification Trademarks

Group Standards of the People's Republic of China

T/XLXH 002-2019 Korla Fragrant Pear Certification Trademark Use Management Regulations
T/GASGSX 001-2023 Yuechi Rice noodles Geographical Indication Certification mark Usage Specification

Hubei Provincial Standard of the People's Republic of China

DB4212/T 46-2021 Service Guide for Application of Registration Certificate for Special Equipment (Trial)

Comitato Elettrotecnico Italiano

CEI 56-7:1990 Equipment reliability testing - Part 6: Validity testing of the constant failure rate assumption
CEI 56-3:1997 Equipment reliability testing - Part 3: Preferred test conditions - Indoor portable equipment. Low degree of simulation
CEI 48-4:1983 Electromechanical components for electronic equipment. Basic test procedures and measurement methods. 2 Group of tests
CEI 48-3:1982 Electromechanical components for electronic equipment. Basic test procedures and measurement methods. 1 Group of tests
CEI 304-2:2005 Immunity tests conducted at the fundamental frequencies of the electricity network on telecommunications equipment
CEI 48-9:1988 Electromechanical components for electronic equipment. Basic test procedures and measurement methods. 4 Group of tests
CEI EN 50664:2018 Generic standard to demonstrate the compliance of equipment used by workers with limits on exposure to electromagnetic fields (0 Hz - 300 GHz), when put into service or in situ
CEI EN 50401:2018 Product standard to demonstrate the compliance of base station equipment with radiofrequency electromagnetic field exposure limits (110 MHz – 100 GHz), when put into service

Austrian Standards

ONORM E 1375-1971 Equipment to prove protection against drops of water
ONORM E 1376-1971 Equipment to prove protection against spraying and splashing water

Ente Nazionale Italiano di Unificazione

UNI EN ISO 3452-4:2000 Non-destructive testing - Penetrant testing - Equipment
UNI EN 13927:2006 Non-destructive testing - Visual testing - Equipment
UNI EN 12668-1:2005 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 1: Instruments
UNI EN 13477-1:2003 Non-destructive testing - Acoustic emission - Equipment characterisation - Equipment description
UNI EN 12668-3:2005 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 3: Combined equipment
UNI EN 13477-2:2003 Non-destructive testing - Acoustic emission - Equipment characterisation - Verification of operating characteristic
EC 1-2007 UNI EN 40-3-3:2004 Lighting columns - Design and verification - Verification by calculation
UNI EN 40-3-3:2004 Lighting columns - Design and verification - Verification by calculation
UNI EN ISO 4871:2009 Acoustics - Declaration and verification of noise emission values of machinery and equipment
UNI EN ISO 4871:1998 Acoustics - Declaration and verification of noise emission values of machinery and equipment

Gosstandart of Russia

GOST 27388-1987 Documents for operation and maintenance of agricultural technique

South African Bureau of Standard

SANS 10317:2004 Instructions for the use of consumer products - Electrical appliances

The Directorate General of Specifications and Metrology (DGSM)

OS GSO 290:1994 Instruction manual for appliances ,Instruments and equipment
OS GSO 1596:2002 agricultural equipment instruction manual and technical publications
OS GSO ISO 4871:2010 Acoustics – Declaration and verification of noise emission values of machinery and equipment

GCC Standardization Organization

GSO 290:1994 Instruction manual for appliances ,Instruments and equipment
GSO OIML D12:2007 Fields of use of measuring instruments subject to verification
GSO 1596:2002 agricultural equipment instruction manual and technical publications
OS GSO ISO 23778:2024 Proof of competence of hydraulic cylinders in crane applications

German Institute for Standardization

DIN EN 50664:2019-05 Generic standard to demonstrate the compliance of equipment used by workers with limits on exposure to electromagnetic fields (0 Hz - 300 GHz), when put into service or in situ; German version EN 50664:2017
DIN EN 592:2002 Instructions for use for devices for in-vitro diagnostic examinations for personal use
DIN EN 50664:2019 Generic standard to demonstrate the compliance of equipment used by workers with limits on exposure to electromagnetic fields (0 Hz - 300 GHz), when put into service or in situ; German version EN 50664:2017
DIN EN 50664:2019-05*VDE 0848-664:2019-05 Generic standard to demonstrate the compliance of equipment used by workers with limits on exposure to electromagnetic fields (0 Hz - 300 GHz), when put into service or in situ;
DIN EN IEC/IEEE 82079-1:2021-09*VDE 0039-1:2021-09 Preparation of information for use (instructions for use) of products
DIN EN 50401:2019-04*VDE 0848-401:2019-04 Product standard to demonstrate the compliance of base station equipment with radiofrequency electromagnetic field exposure limits (110 MHz - 100 GHz), when put into service;
DIN EN 50401:2019 Product standard to demonstrate the compliance of base station equipment with radiofrequency electromagnetic field exposure limits (110 MHz - 100 GHz), when put into service; German version EN 50401:2017
DIN EN 50401/A1 E:2019-10 Draft Document - Product standard to demonstrate the compliance of base station equipment with radiofrequency electromagnetic field exposure limits (110 MHz - 100 GHz), when put into service; German and English version EN 50401:2017/prA1:2019
DIN EN 50401:2017-10 Draft Document - Product standard to demonstrate the compliance of base station equipment with radiofrequency electromagnetic field exposure limits (110 MHz - 100 GHz), when put into service; German version FprEN 50401:2017
DIN EN ISO 4871:2009-11 Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996); German version EN ISO 4871:2009
DIN EN 60598-2-22:2008 Luminaires - Part 2-22: Particular requirements - Luminaires for emergency lighting (IEC 60598-2-22:1997, modified + A1:2002 + A2:2008); German version EN 60598-2-22:1998 + A1:2003 + CENELEC-Cor. :2007 + A2:2008
DIN EN 50401 E:2017 Draft Document - Product standard to demonstrate the compliance of base station equipment with radiofrequency electromagnetic field exposure limits (110 MHz - 100 GHz), when put into service; German version FprEN 50401:2017
DIN EN 50664 E:2017-03 Draft Document - Product standard to demonstrate the compliance of equipment intended for use only by workers with limits on human exposure to electromagnetic fields (0 Hz - 300 GHz), when put into service or in situ; German version FprEN 50664:2016

Spanish Association for Standardization (UNE)

UNE-EN 50664:2017 Generic standard to demonstrate the compliance of equipment used by workers with limits on exposure to electromagnetic fields (0 Hz - 300 GHz), when put into service or in situ (Endorsed by Asociación Española de Normalización in December of 2017.)
UNE 60-796-1988 Host equipment for civil lighting (using liquefied petroleum gas fuel)
UNE-EN 50401:2017 Product standard to demonstrate the compliance of base station equipment with radiofrequency electromagnetic field exposure limits (110 MHz - 100 GHz), when put into service (Endorsed by Asociación Española de Normalización in November of 2017.)

American Society of Mechanical Engineers (ASME)

ASME QME-1-2012 Qualification of Active Mechanical Equipment Used in Nuclear Power Plants
ASME NQA-1 INTERPRETATIONS-2001 Interpretations to NQA-1-2000 Edition Quality Assurance Requirements for Nuclear Facility Applications
ASME QRO-1-2005 Standard for the Qualification and Certification of Resource Recovery Facility Operators
ASME QFO-1-1998 Standard for the Qualification and Certification of Operators of High Capacity Fossil Fuel Fired Plants

American National Standards Institute （ANSI)

ANSI/ASME QME-1-2012 Qualification of Active Mechanical Equipment Used in Nuclear Power Plants
ANSI/IES TM-31-20 MEASUREMENT UNCERTAINTY FOR LIGHTING EQUIPMENT CALIBRATION USING INTEGRATING SPHERES

Association Francaise de Normalisation

NF M82-661:1963 Mining equipment. Solid lubricants. Recommendations for use.
NF C99-135*NF EN 50664:2017 Generic standard to demonstrate the compliance of equipment used by workers with limits on exposure to electromagnetic fields (0 Hz - 300 GHz), when put into service or in situ
NF EN 50401:2018 Product standard to demonstrate compliance of base station equipment with radio frequency electromagnetic field exposure limits, (110 MHz - 100 GHz), when placed into service
NF C99-114*NF EN 50401:2018 Product standard to demonstrate the compliance of base station equipment with radiofrequency electromagnetic field exposure limits (110 MHz - 100 GHz), when put into service
NF U61-060:1994 Agri-foodstuffs equipment. Pumps. Design rules to ensure hygiene in use.
NF EN ISO 4871:2009 Acoustics - Declaration and verification of noise emission values of machines and equipment
NF C71-022/A2:2008 Luminaires - Part 2-22 : particular requirements - Luminaires for emergency lighting.

Canadian Standards Association (CSA)

CSA DIR.005.5-97 List of CSA Certified Lighting Equipment and Products

British Standards Institution (BSI)

BS EN 50664:2017 Generic standard to demonstrate the compliance of equipment used by workers with limits on exposure to electromagnetic fields (0 Hz - 300 GHz), when put into service or in situ
PD CEN/TS 764-8:2016 Pressure equipment and assemblies - Part 8: Proof test
BS CECC 00108:1996 Rule of Procedure 8. Attestation of conformity - The CECC Mark and conditions of use, certificates of approval and procedures for the attestation of conformity
BS EN 50401:2017 Product standard to demonstrate the compliance of base station equipment with radiofrequency electromagnetic field exposure limits (110 MHz - 100 GHz), when put into service
BS 3224-4:1988 Lighting fittings for civil land aerodromes - Specification for elevated lighting units
BS 3224-5:1988 Lighting fittings for civil land aerodromes - Specification for inset lighting units

European Committee for Electrotechnical Standardization（CENELEC）

EN 50664:2017 Generic standard to demonstrate the compliance of equipment used by workers with limits on exposure to electromagnetic fields (0 Hz - 300 GHz)@ when put into service or in situ
prEN 50664 Generic standard to demonstrate the compliance of equipment used by workers with limits on exposure to electromagnetic fields (0 Hz - 300 GHz), when put into service or in situ

National Electrical Manufacturers Association（NEMA)

NEMA C136.5-1979 FILM CUTOUTS USED IN ROADWAY LIGHTING EQUIPMENT
NEMA C136.11-1979 MULTIPLE SOCKETS USED IN ROADWAY LIGHTING EQUIPMENT
NEMA LSD 10-2000 Guidelines for safe use of remote lighting system equipment

Danish Standards Foundation

DANSK DS/EN 50664:2017 Generic standard to demonstrate the compliance of equipment used by workers with limits on exposure to electromagnetic fields (0 Hz – 300 GHz), when put into service or in situ
DANSK DS/EN 50401:2017 Product standard to demonstrate the compliance of base station equipment with radiofrequency electromagnetic field exposure limits (110 MHz – 100 GHz), when put into service
DANSK DS/EN ISO 4871:2009 Acoustics - Declaration and verification of noise emission values of machinery and equipment

Polski Komitet Normalizacyjny (PKN)

PN Z02009-02-1986 Indyvidual respiratory protective equipment used in air environment Facepieces Marking information inscriptions and instructions of the use

United States Navy

NAVY MIL-HDBK-704-1 VALID NOTICE 2-2013 Guidance for Test Procedures for Demonstration of Utilization Equipment Compliance to Aircraft Electrical Power Characteristics (Part 1 of 8 Parts)
NAVY MIL-HDBK-704-7 VALID NOTICE 2-2013 Guidance for Test Procedures for Demonstration of Utilization Equipment Compliance to Aircraft Electrical Power Characteristics 270 VDC (Part 7 of 8 Parts)
NAVY MIL-HDBK-704-8 VALID NOTICE 2-2013 Guidance for Test Procedures for Demonstration of Utilization Equipment Compliance to Aircraft Electrical Power Characteristics 28 VDC (Part 8 of 8 Parts)

Swedish Institute for Standards

SS-EN 50401:2017 Product standard to demonstrate the compliance of base station equipment with radiofrequency electromagnetic field exposure limits (110 MHz - 100 GHz), when put into service
SS-EN 50664:2017 Product standard to demonstrate the compliance of equipment intended for use only by workers with limits on human exposure to electromagnetic fields (0 Hz - 300 GHz), when put into service or in situ

International Telecommunication Union (ITU)

ITU-T X.1158-2014 Multi-factor authentication mechanisms using a mobile device

Association of German Mechanical Engineers

VDI/VDE 2180 Blatt 4-2009 Safeguarding of industrial process plants by means of process control engineering - Calculating methods of reliability characteristics of safety instrumented functions
VDI 2700 Blatt 3-1-2023 Securing of loads on road vehicles - Instruction manual for lashings
VDI 3423-1968 LOAD PROOF AND FAILURE STATISTICS OF NUMERICALLY CONTROLLED PRODUCTION SYSTEMS
VDI 2700 Blatt 3.1-2004 Securing of loads on road vehicles - Instruction manual for lashings

National Standardisation Body (ASRO)

SR 6646-5-1997 Artificial lightning Specific requirements for hospital lightning
SR 6646-3-1997 Artificial lightning Specific requirements for the lightning in the civil building

U.S. Military Regulations and Norms

ARMY MIL-HDBK-792-1989 PROVE OUT OF PRODUCTION FACILITIES

Australian/New Zealand Standard (AU-AS/NZS)

AS/NZS 60598.2.4:2005(R2016) Luminaires.Particular requirements—Portable general purpose luminaires

BELST

STB 2402-2015 Electronic documents. The order of storage and use of public key certificates and revoke the certificates as the proof

American Petroleum Institute (API)

API RP T-2-2001(2013) Recommended Practice for Qualification Programs for Offshore Production Personnel Who Work with Safety Devices

International Organization for Standardization (ISO)

ISO 4871 Acoustics - Declaration and verification of noise emission values of machinery and equipment

Korean Agency for Technology and Standards (KATS)

KS I ISO 4871-2023 Acoustics — Declaration and verification of noise emission values of machinery and equipment

Bureau of Indian Standards

IS/ISO 4871-1996 Acoustics - Â Declaration and Verification of Noise Emission Values of Machinery and Equipment

Underwriters Laboratories (UL)

UL ECVP 3140-2016 Environmental Claim Validation Procedure (ECVP) for Comparing Environmental Impacts of Sterilization Equipment