transient spectroscopy

transient spectroscopy, Total:101 items.

The international standard classification for "transient spectroscopy" includes: Electronic display devices .

The Chinese standard classification for "transient spectroscopy" includes: Computer peripherals , Technical management .

National Metrological Technical Specifications of the People's Republic of China

JJF 1330-2011 Calibration Specification for Instantaneous Effective Intensity Testers
JJF 1385-2012 Calibration Specification for Flow Analyzer for Short Transient Loaded Mode of Gasoline Vehicles
JJF 1329-2011 Calibration Specification for Instantaneous Spectral Instruments

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 38621-2020 Transient thermal test method for light emitting diode modules

未注明发布机构

DIN EN 61290-4-3 E:2017-11 Optical amplifiers - Test methods - Part 4-3: Power transient parameters - Single channel optical amplifiers in output power control
DIN EN 61290-4-1 E:2015-06 Optical amplifiers - Test methods - Part 4-1: Gain transient parameters - Two-wavelength method
DIN EN 61290-4-3 E:2013-12 Optical amplifiers - Test methods - Part 4-3: Power transient parameters - Single channel optical amplifiers in output power control
DIN EN IEC 61290-4-4:2019 Optical amplifiers - Test methods - Part 4-4: Gain transient parameters - Single channel optical amplifiers with gain control

Professional Standard - Aviation

HB 5400-1988 Rubber thermal conductivity test method transient hot wire method

Professional Standard - Energy

NB/T 20314-2014 Transient counting for nuclear power plants

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 11205-1989 Rubber--Determination of thermal conductivity by means of transient hot-wire method

Group Standards of the People's Republic of China

T/CSAE 272-2022 General test method for transient longitudinal slip property of tyres
T/CSAE 271-2022 General test method for transient lateral slip property of tyres
T/CAMS /CICEIA168-2023 test method of transient response ability for turbocharger
T/CSAE 273-2022 General test method for transient state combined slip property of tyres

Guizhou Provincial Standard of the People's Republic of China

DB52/T 1104-2016 Transient test method for junction-case thermal resistance of semiconductor devices

Professional Standard - Nuclear Industry

EJ/T 1013-1996 Transient Analysis of Light Water Reactor Containment Pressure and Temperature
EJ/T 924-1995 Transient Analysis of Light Water Reactor Compartment Pressure and Temperature

Professional Standard - Electron

SJ/T 10482-1994 Test method for characterizing semiconductor deep levels by transient capacitance techniques

British Standards Institution (BSI)

BS EN 61290-4-2:2011 Optical amplifiers. Test methods. Gain transient parameters. Broadband source method
BS EN 61290-4-1:2016 Optical amplifiers. Test methods. Gain transient parameters. Two-wavelength method
BS EN 61290-4-1:2011 Optical amplifiers. Test methods. Gain transient parameters. Two-wavelength method
BS EN IEC 61290-4-4:2018 Optical amplifiers. Test methods - Gain transient parameters. Single channel optical amplifiers with gain control
BS EN IEC 61290-4-3:2018 Optical amplifiers. Test methods - Power transient parameters. Single channel optical amplifiers in output power control

GSO

OS GSO IEC 61290-4-1:2014 Optical amplifiers - Test methods - Part 4-1: Gain transient parameters - Two-wavelength method
OS GSO IEC 61290-4-2:2014 Optical amplifiers - Test methods - Part 4-2: Gain transient parameters - Broadband source method
BH GSO IEC 61290-4-3:2022 Optical amplifiers - Test methods - Part 4-3: Power transient parameters - Single channel optical amplifiers in output power control
GSO IEC 61290-4-3:2021 Optical amplifiers - Test methods - Part 4-3: Power transient parameters - Single channel optical amplifiers in output power control

Association Francaise de Normalisation

NF EN 61290-4-1:2017 Optical amplifiers - Test methods - Part 4-1: transient gain parameters - Two-wavelength method
NF C93-805-4-2*NF EN 61290-4-2:2011 Optical amplifiers - Test methods - Part 4-2 : gain transient parameters - Broadband source method
NF C93-805-4-1:2011 Optical amplifiers - Test methods - Part 4-1 : gain transient parameters - Two-wavelength method.
NF C93-805-4-1*NF EN 61290-4-1:2017 Optical amplifiers - Test methods - Part 4-1 : gain transient parameters - Two-wavelength method
NF EN 61290-4-2:2011 Optical amplifiers - Test methods - Part 4-2: transient gain parameters - Broadband source method
NF EN IEC 61290-4-4:2018 Optical amplifiers - Test methods Part 4-4: Transient gain parameters - Single-channel optical amplifiers with gain control
NF EN IEC 61290-4-3:2018 Optical amplifiers - Test methods - Part 4-3: transient power parameters - Single-channel optical amplifiers controlled by output power
NF C93-805-4-4*NF EN IEC 61290-4-4:2018 Optical amplifiers - Test methods - Part 4-4 : gain transient parameters - Single channel optical amplifiers with gain control
NF C93-805-4-3*NF EN IEC 61290-4-3:2018 Optical amplifiers - Test methods - Part 4-3 : power transient parameters - Single channel optical amplifiers in output power control

Danish Standards Foundation

DS/EN 61290-4-1:2011 Optical amplifiers - Test methods - Part 4-1: Gain transient parameters - Two-wavelength method
DS/EN 61290-4-2:2011 Optical amplifiers - Test methods - Part 4-2: Gain transient parameters - Broadband source method

SCC

DANSK DS/EN 61290-4-1:2017 Optical amplifiers – Test methods – Part 4-1: Gain transient parameters – Two-wavelength method
CEI EN 61290-4-1:2017 Optical amplifiers - Test methods Part 4-1: Gain transient parameters - Two-wavelength method
CEI EN 61290-4-2:2012 Optical amplifiers - Test methods Part 4-2: Gain transient parameters - Broadband source method
DANSK DS/EN 61290-4-2:2011 Optical amplifiers - Test methods - Part 4-2: Gain transient parameters - Broadband source method
ESD SP5.4-2008 Transient Latch-up Testing - Component Leve Supply Transient Stimulation
09/30205272 DC BS EN 61290-4-2. Optical amplifiers. Test methods. Part 4-2. Gain transient parameters. Broadband source method
09/30205262 DC BS EN 61290-4-1. Optical amplifiers. Test methods. Part 4-1. Gain transient parameters. Two-wavelength method
AWWA JAW27634 Journal AWWA — Transient Analysis of Water Distribution Systems
CEI EN IEC 61290-4-4:2019 Optical amplifiers - Test methods Part 4-4: Gain transient parameters - Single channel optical amplifiers with gain control
DANSK DS/EN IEC 61290-4-4:2018 Optical amplifiers – Test methods – Part 4-4: Gain transient parameters – Single channel optical amplifiers with gain control
AWWA WQTC71410 Intrusion Volumes Computed with Transient Analysis Supported by Transient Pressure Recordings in a Full-Scale Distribution System
DIN IEC 61290-4-2 E:2009 Draft Document - Optical amplifiers - Test methods - Part 4-2: Gain transient parameters - Broadband source method (IEC 86C/896/CD:2009)
DANSK DS/EN 61290-4-3:2015 Optical amplifiers – Test methods – Part 4-3: Power transient parameters – Single channel optical amplifiers in output power control
CEI EN 61290-4-3:2016 Optical amplifiers - Test methods Part 4-3: Power transient parameters - Single channel optical amplifiers in output power control
BS EN 61290-4-3:2015 Optical amplifiers. Test methods-Power transient parameters. Single channel optical amplifiers in output power control
DANSK DS/EN IEC 61290-4-3:2018 Optical amplifiers — Test methods — Part 4-3: Power transient parameters — Single channel optical amplifiers in output power control
CEI EN IEC 61290-4-3:2019 Optical amplifiers - Test methods Part 4-3: Power transient parameters - Single channel optical amplifiers in output power control
DIN EN 61290-4-1 E:2015 Draft Document - Optical amplifiers - Test methods - Part 4-1: Gain transient parameters - Two-wavelength method (IEC 86C/1287/CD:2014)
AENOR UNE-EN 61643-11/A11:2013 Low-voltage transient overvoltage protection devices - Part 11: Transient overvoltage protection devices connected to low-voltage electrical systems - Requirements and test methods.
MIL MIL-S-55689-1969 SUPPRESSOR, ELECTRICAL TRANSIENT MX-7778( )/GRC
AWWA JAW70292 Journal AWWA — A Lagrangian Wave Characteristic Method for Simulating Transient Water Column Separation
AWWA ACE95137 Transient Analysis Considerations for a Raw Water Transmission System

German Institute for Standardization

DIN EN 61290-4-1:2017-06 Optical amplifiers - Test methods - Part 4-1: Gain transient parameters - Two-wavelength method (IEC 61290-4-1:2016); German version EN 61290-4-1:2016 / Note: DIN EN 61290-4-1 (2012-04) remains valid alongside this standard until 2019-10-31.
DIN EN 61290-4-2:2012-04 Optical amplifiers - Test methods - Part 4-2: Gain transient parameters - Broadband source method (IEC 61290-4-2:2011); German version EN 61290-4-2:2011 / Note: Applies in conjunction with DIN EN 61291-1 (2007-06).
DIN EN IEC 61290-4-3:2019-12 Optical amplifiers - Test methods - Part 4-3: Power transient parameters - Single channel optical amplifiers in output power control (IEC 61290-4-3:2018); German version EN IEC 61290-4-3:2018 / Note: DIN EN 61290-4-3 (2016-06) remains valid alongside t...
DIN EN 61290-4-2:2012 Optical amplifiers - Test methods - Part 4-2: Gain transient parameters - Broadband source method (IEC 61290-4-2:2011); German version EN 61290-4-2:2011
DIN EN IEC 61290-4-4:2019-04 Optical amplifiers - Test methods - Part 4-4: Gain transient parameters - Single channel optical amplifiers with gain control (IEC 61290-4-4:2018); German version EN IEC 61290-4-4:2018

ES-UNE

UNE-EN 61290-4-2:2011 Optical amplifiers - Test methods - Part 4-2: Gain transient parameters - Broadband source method (Endorsed by AENOR in January of 2012.)
UNE-EN 61290-4-1:2016 Optical amplifiers - Test methods - Part 4-1: Gain transient parameters - Two-wavelength method (Endorsed by Asociación Española de Normalización in February of 2017.)
UNE-EN IEC 61290-4-4:2018 Optical amplifiers - Test methods - Part 4-4: Gain transient parameters - Single channel optical amplifiers with gain control (Endorsed by Asociación Española de Normalización in November of 2018.)
UNE-EN IEC 61290-4-3:2018 Optical amplifiers - Test methods - Part 4-3: Power transient parameters - Single channel optical amplifiers in output power control (Endorsed by Asociación Española de Normalización in August of 2018.)

International Electrotechnical Commission (IEC)

IEC 61290-4-1:2011 Optical amplifiers - Test methods - Part 4-1: Gain transient parameters - Two-wavelength method
IEC 61290-4-1:2016 Optical amplifiers - Test methods - Part 4-1: Gain transient parameters - Two-wavelength method
IEC 61290-4-4:2018 Optical amplifiers - Test methods - Part 4-4: Gain transient parameters - Single channel optical amplifiers with gain control
IEC 61290-4-3:2015 Optical amplifiers - Test methods - Part 4-3: Power transient parameters - Single channel optical amplifiers in output power control
IEC 61290-4-3:2018 Optical amplifiers - Test methods - Part 4-3: Power transient parameters - Single channel optical amplifiers in output power control

European Committee for Electrotechnical Standardization（CENELEC）

EN 61290-4-2:2011 Optical amplifiers - Test methods - Part 4-2: Gain transient parameters - Broadband source method
EN 61290-4-1:2016 Optical amplifiers - Test methods - Part 4-1: Gain transient parameters - Two-wavelength method
EN 61290-4-1:2011 Optical amplifiers - Test methods - Part 4-1: Gain transient parameters - Two-wavelength method
EN IEC 61290-4-3:2018 Optical amplifiers - Test methods - Part 4-3: Power transient parameters - Single channel optical amplifiers in output power control

Society of Automotive Engineers (SAE)

SAE AIR817-2002 A TECHNIQUE FOR NARROW BAND ANALYSIS OF A TRANSIENT

SAE - SAE International

SAE AIR817-1967 A TECHNIQUE FOR NARROW BAND ANALYSIS OF A TRANSIENT

IEC - International Electrotechnical Commission

IEC 61290-4-2:2011 Optical amplifiers – Test methods – Part 4-2: Gain transient parameters – Broadband source method (Edition 1.0)

Lithuanian Standards Office

LST EN 61290-4-1-2011 Optical amplifiers - Test methods -- Part 4-1: Gain transient parameters - Two-wavelength method (IEC 61290-4-1:2011)
LST EN 61290-4-2-2011 Optical amplifiers - Test methods -- Part 4-2: Gain transient parameters - Broadband source method (IEC 61290-4-2:2011)

Japanese Industrial Standards Committee (JISC)

JIS C 6122-4-1:2013 Optical amplifiers.Test methods.Part 4-1: Transient parameters.Measurement of gain parameters using two-wavelength method
JIS C 6122-4-2:2013 Optical amplifiers -- Test methods -- Part 4-2: Transient parameters -- Measurement of gain parameters using broadband source method
JIS C 6122-4-3:2018 Optical amplifiers -- Test methods -- Part 4-3: Power transient parameters -- Single channel optical amplifiers in output power control

SE-SIS

SIS SS-ISO 7401:1989 Road vehicles — Lateral transient response test methods

CENELEC - European Committee for Electrotechnical Standardization

EN IEC 61290-4-4:2018 Optical amplifiers - Test methods - Part 4-4: Gain transient parameters - Single channel optical amplifiers with gain control
EN 61290-4-3:2015 Optical amplifiers - Test methods - Part 4-3: Power transient parameters - Single channel optical amplifiers in output power control

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc.

ASHRAE 4591-2002 Transient Analysis of Snow-Melting System Performance (RP-1090)

Korean Agency for Technology and Standards (KATS)

KS R 3959-2023 Passenger cars — Validation of vehicle dynamic simulation — Lateral transient response test methods
KS R 3959-2018 Passenger cars — Validation of vehicle dynamic simulation — Lateral transient response test methods

IET - Institution of Engineering and Technology

PWR SYS ELECTRO TRANSNT SIMUL-2003 Power Systems Electromagnetic Transients Simulation

KR-KS

KS R ISO 22140-2023 Passenger cars — Validation of vehicle dynamic simulation — Lateral transient response test methods
KS R 3959-2018(2023) Passenger cars — Validation of vehicle dynamic simulation — Lateral transient response test methods