low melting peak

low melting peak, Total:83 items.

The international standard classification for "low melting peak" includes: Adhesives , Plastics in general , Other iron and steel products , Coals , Protection against dangerous goods , Aluminium products , Textile fabrics , Other textile machinery .

The Chinese standard classification for "low melting peak" includes: Basic standards and general methods for adhesives , Basic standards and general methods for synthetic resin and plastic , Beneficiation reagent , Coal analysis methods , Marking, packaging, transport and storage in general , Light metals and their alloys , Other textile articles , Chemical fiber machinery and instrument .

Professional Standard - Building Materials

JC/T 2250-2014 Fused silica

工业和信息化部

YB/T 4578-2016 Fused-silica bricks

Professional Standard - Chemical Industry

HG/T 3660-1999 Teasting methods for melt viscosity of hot - Melt adhesives

国家煤炭工业局

MT/T 853-2000 coal ash fusibility classification

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 16582-2008 Plastics - Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods
GB/T 219-1996 Determination of fusibility of coal ash
GB/T 21783-2008 Plastics - Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods
GB/T 32961-2016 Disintegrated molten BOF steel slag by steam
GB/T 219-2008 Determination of fusibility of coal ash

Professional Standard - Non-ferrous Metal

YS/T 1004-2014 Molten aluminum and aluminum alloys

Group Standards of the People's Republic of China

T/CFA 020204.1-2018 Fused ceramic sand for foundry
T/HJAITISA 03-2020 Molten aluminium and aluminium alloys
T/CSBM 0025-2022 Melt derived bioactive glass materials
T/SSEA 0086-2020 HIsmelt Smelting Reduction High Purity Pig Iron

Anhui Provincial Standard of the People's Republic of China

DB34/T 2048-2014 Fusibility classification of blended coal ash

Taiwan Provincial Standard of the People's Republic of China

CNS 1947-1976 Sodium Bisulfate, Fused
CNS 1952-1976 Sodium Borate, Fused
CNS 8835-1996 Methods of Test for Melting Point and Melting Range of Chemical Products

Professional Standard - Textile

FZ/T 64083-2021 Fabrics for protection against molten metal splash
FZ/T 92043-2023 Melt spinning special hole spinneret
FZ/T 92038-1995 Melt spinning circular hole spinneret
FZ/T 92038-2023 Round hole spinneret for melt spinning
FZ/T 92043-1995 Melt spinning profile hole spinneret

Professional Standard - Commodity Inspection

SN/T 2427-2010 Determination of melting temperature and melting temperature range of chemicals for import and export by differential scanning calorimetry

GM Europe

GME QK 000185-1983 Polycarbonat - Formmasse niederer Schmelzviskosit鋞 Polycarbonate - Moulding Compound Low Melting Viscosity German

SE-SIS

SIS SS-ISO 3146:1987 Plastics - Determination of the melting behaviour (melting tern perature or melting range) of semi-crystalline polymers

SCC

BS EN ISO 3146:1997 Plastics. Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers
NS-EN ISO 3146:1997 Plastics — Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers (ISO 3146:1985)
DANSK DS/ISO 3146:2022 Plastics – Determination of melting behavior (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods
DANSK DS/EN ISO 3146:2000 Plastics – Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods
NS-EN ISO 3146:2022 Plastics - Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods (ISO 3146:2022)
NS-EN ISO 3146:2000 Plastics — Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods (ISO 3146:2000)
AENOR UNE-EN ISO 3146:2001 Plastics. Determination of the melting behavior (melting temperature or melting range) of semi-crystalline polymers using capillary tube and polarization microscope methods. (ISO 3146:2000).
BS PD IEC/TR 60269-5:2010 Low-voltage fuses-Guidance for the application of low-voltage fuses
AWWA C225-2020 Fused Polyolefin Coatings for Steel Water Pipe
DANSK DS/EN 62739-3:2017 Test method for erosion of wave soldering equipment using molten lead-free solder alloy – Part 3: Selection guidance of erosion test methods

CZ-CSN

CSN ON 70 5114-1965 fused quartz
CSN 72 1202-1986 Melting glass-sand. Quality

German Institute for Standardization

DIN 12330:1981 Laboratory ware made from fused quartz and fused silica; beakers made from fused quartz
DIN 12330:1981-11 Laboratory ware made from fused quartz and fused silica; beakers made from fused quartz
DIN 12542:1979-04 Laboratory ware made from fused quartz and fused silica; straight bore stopcocks made from fused quartz
DIN 12353:1981 Laboratory ware made from fused quartz and fused silica; boiling flasks made from fused quartz; round bottom flasks, flat bottom flasks and conical flasks
DIN 12543:1979-05 Laboratory ware made from fused quartz and fused silica; T-bore stopcocks made from fused quartz
DIN 12543:1979 Laboratory ware made from fused quartz and fused silica; T-bore stopcocks made from fused quartz
DIN EN ISO 3146:2022-06 Plastics - Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods (ISO 3146:2022); German version EN ISO 3146:2022
DIN 12542:1979 Laboratory ware made from fused quartz and fused silica; straight bore stopcocks made from fused quartz
DIN 12353:1981-11 Laboratory ware made from fused quartz and fused silica; boiling flasks made from fused quartz; round bottom flasks, flat bottom flasks and conical flasks
DIN EN 62739-3:2017-10 Test method for erosion of wave soldering equipment using molten lead-free solder alloy - Part 3: Selection guidance of erosion test methods (IEC 62739-3:2017); German version EN 62739-3:2017

Korean Agency for Technology and Standards (KATS)

KS D 8308-2016 Zinc hot dip galvanizings
KS D 9524-1996(2001) RECOMMENDED PRACTICE FOR HOT DIP ALUMINIZED COATINGS ON FERROURS PRODUCTS
KS M ISO 3146-2022 Plastics－Determination of melting behaviour(melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods
KS M ISO 3146-2012(2017) Plastics－Determination of melting behaviour(melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods
KS D 3629-2019 Fusion bonded epoxy coated reinforcing steel bars

RU-GOST R

GOST 9087-1981 Welding melted fluxes. Specifications

American Society for Testing and Materials (ASTM)

ASTM F1056-97 Standard Specification for Socket Fusion Tools for Use in Socket Fusion Joining Polyethylene Pipe or Tubing and Fittings
ASTM F1056-04(2011) Standard Specification for Socket Fusion Tools for Use in Socket Fusion Joining Polyethylene Pipe or Tubing and Fittings

TR-TSE

TS 610-1968 DETERMINATION OF FUSIBILITY OF FUEL ASH
TS 284-1965 FUSED CUPPING TEST OF STEEL SHEET

ES-UNE

UNE-EN ISO 3146:2022 Plastics - Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods (ISO 3146:2022)

British Standards Institution (BSI)

BS EN ISO 3146:2022 Plastics. Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods
21/30427377 DC BS EN ISO 3146. Plastics. Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods
BS EN 62739-3:2017 Test method for erosion of wave soldering equipment using molten lead-free solder alloy. - Part 3: Selection guidance of erosion test methods
PD IEC TR 60269-5:2014+A1:2020 Low-voltage fuses. Guidance for the application of low-voltage fuses
BS EN 62739-2:2016 Test method for erosion of wave soldering equipment using molten lead-free solder alloy. Erosion test method for metal materials with surface processing

American National Standards Institute （ANSI)

ANSI/ASTM F1056:2004 Specification for Socket Fusion Tools for Use in Socket Fusion Joining Polyethylene Pipe or Tubing and Fittings

Association Francaise de Normalisation

NF EN ISO 3146:2022 Plastics - Determination of melting behavior (melting temperature or melting temperature range) of semi-crystalline polymers by capillary tube and polarizing microscope methods
NF C93-742-3*NF EN 62739-3:2017 Test method for erosion of wave soldering equipment using molten lead free solder alloy - Part 3bn: selection guidance of erosion test methods

DIN

DIN EN ISO 3146:2022 Plastics - Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods (ISO 3146:2022)

RO-ASRO

STAS 10992-1977 Determination of melting point and melting interval by capillary method

Standard Association of Australia （SAA）

AS 3586.2:1997 Ferroalloys - Sampling - Molten alloys

European Committee for Electrotechnical Standardization（CENELEC）

EN 62739-3:2017 Test method for erosion of wave soldering equipment using molten lead-free solder alloy - Part 3: Selection guidance of erosion test methods

BE-NBN

NBN C 63-021-1977 Low voltage fuse fuse Low voltage industrial fuse fuse. 500V Features

The Aluminum Association

AA GMA69-2002 Guidelines for Handling Molten Aluminum (Third Edition)
AA 69-2002 Guidelines for Handling Molten Aluminum Third Edition

International Electrotechnical Commission (IEC)

IEC 62739-3:2017 Test method for erosion of wave soldering equipment using molten lead-free solder alloy - Part 3: Selection guidance of erosion test methods

U.S. Air Force

AIR FORCE MIL-C-83242-1969 CORD, AROMATIC POLYAMIDE, NONMELTING
AIR FORCE MIL-C-38351 A-1972 CLOTH, PARACHUTE, NYLON, AROMATIC, NONMELTING
AIR FORCE MIL-C-83242 REINST NOTICE 3-1999 CORD, AROMATIC POLYAMIDE, NONMELTING
AIR FORCE MIL-C-38351 A REINST NOTICE 2-1991 CLOTH, PARACHUTE, NYLON, AROMATIC, NONMELTING
AIR FORCE MIL-C-83242 (2)-1999 CORD, AROMATIC POLYAMIDE, NONMELTING
AIR FORCE MIL-C-83242 VALID NOTICE 1-1987 CORD, AROMATIC POLYAMIDE, NONMELTING

GSO

BH GSO IEC 62739-3:2022 Test method for erosion of wave soldering equipment using molten lead-free solder alloy - Part 3: Selection guidance of erosion test methods

(U.S.) Ford Automotive Standards

FORD U-MB004-8001-1996 SALTS FOR MOLTEN SALT BATH NITRO CARBURISING