Nitrogen tank size

Nitrogen tank size, Total:229 items.

The international standard classification for "Nitrogen tank size" includes: Fluid power systems , Equipment for the metallurgical industry , Cutting tools in general .

The Chinese standard classification for "Nitrogen tank size" includes: Hydraulic and pneumatic device , Metallurgical equipment , Cutting tools .

Professional Standard - Machinery

JB/T 2001.55-1999 Water system - Gas ball-accumulator - Type and size（PN=31.5MPa）
JB/T 2450-1999 The type and basic data and the size for slag pot car
JB/T 2001.57-1999 Water system - Gas ball-accumulator Type and size（PN=20MPa）
JB/T 2450-2010 The type and basic data and the size for slag pot car

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 6406-1996 Super abrasive -Grain sizes of diamond or cubic boron nitride
GB/T 32336-2015 Pneumatic fluid power. Basic, mounting and accessories dimensions of cylinders with detachable mountings, bores from 32mm to 320mm
GB/T 21951-2023 Cubic boron nitride inserts, tipped or solid—Dimensions，types
GB/T 21951-2008 Cubic boron nitride inserts tipped or solid - Dimensions

Professional Standard - Aviation

HBm 1-1982 YD-10 liquid nitrogen refrigeration tank

SE-SIS

SIS SS 694-1988 Gas cylinders — Gas cylinders for carbon dioxide and nitrous oxide — Dimensions
SIS SS 2233-1988 Gas cylinders — Gas cylinders for liquefied petroleum gas — Filling weight from 5 kg upwards — Dimensions
SIS SS 2236-1988 Gas cylinders — Gas cylinders for liquefied petroleum gas — Filling weight below 5 kg — Dimensions
SIS SS-ISO 6106:1986 Abrasive products - G ra in sizes of diamond or cubic boron nitride

British Standards Institution (BSI)

BS EN 15007:2017 Aerosol containers. Tinplate containers. Dimensions of two and three-piece cans
BS EN 15008:2007 Aerosol containers - Aluminium containers - Dimensions of one-piece cans with 25,4 mm aperture
BS EN 15007:2007 Metal aerosol containers - Tinplate containers - Dimensions of two and three-piece cans
BS EN 15008:2006 Aerosol containers - Aluminium containers - Dimensions of one-piece cans with 25,4 mm aperture
BS EN 15006:2007 Metal aerosol containers - Aluminium containers - Dimensions of the 25,4 mm aperture
BS EN 15006:2006 Metal aerosol containers - Aluminium containers - Dimensions of the 25,4 mm aperture
BS EN 15007:2006 Metal aerosol containers - Tinplate containers - Dimensions of two and three-piece cans
BS ISO 10154:1991(2000) Light gauge metal containers — Three - piece necked - in tinplate aerosol cans — Dimensions ofthe top end
BS EN ISO 90-3:2001 Light gauge metal containers. Definitions and determination of dimensions and capacities. Light gauge metal containers. Definitions and determination of dimensions and capacities. Aerosol cans
BS ISO 10154:1991 Light gauge metal containers. Three-piece necked-in tinplate aerosol cans. Dimensions of the top end
BS EN 15010:2007 Aerosol containers - Aluminium containers - Tolerances of the fundamental dimensions in connection with the clinch
BS EN 15010:2006 Aerosol containers — Aluminium containers — Tolerances of the fundamenta dimensions in connection with the clinch
BS ISO TR 11762:1996 Light-gauge metal containers - Round open-top cans for liquid products with added gas - Classification of can sizes by construction type
BS EN 15008:2017 Aerosol containers. Aluminium containers. Dimensions of one-piece cans with 25,4 mm aperture
BS 7289:1990 Specification for dimensions of three-piece tinplate aerosol cans
BS ISO TR 11761:1992 Light-gauge metal containers. Round open-top cans. Classification of can sizes by construction type
BS EN 286-1:1998+A2:2005 Simple unfired pressure vessels designed to contain air or nitrogen - Pressure vessels for general purposes
BS ISO TR 11762:1992 Light-gauge metal containers. Round open-top cans for liquid products with added gas. Classification of can sizes by construction type

SCC

DANSK DS/EN 15007:2017 Aerosol containers – Tinplate containers – Dimensions of two and three-piece cans
AENOR UNE-EN 15007:2017 Aerosol containers - Tinplate containers - Dimensions of two and three-piece cans
NS-EN 15007:2017 Aerosol containers — Tinplate containers — Dimensions of two and three-piece cans
BS 2047:1974 Dimensions of cylindrical silver cans
DIN EN 15007 E:2016 Draft Document - Aerosol containers - Tinplate containers - Dimensions of two and three-piece cans; German and English version prEN 15007:2016
NS-EN 15007:2006 Metal aerosol containers — Tinplate containers — Dimensions of two and three-piece cans
DIN 75013 E:2015 Draft Document - Tank trucks - Grounding plate - Dimensions
DIN 75012 E:2015 Draft Document - Road tankers - Dipstick assembly - Mating dimensions
IEC 60133:1961 Dimensions of pot-cores made of ferromagnetic oxides
NS-EN 15008:2017 Aerosol containers — Aluminium containers — Dimensions of one-piece cans with 25,4 mm aperture
NS-EN 15008:2006 Aerosol containers — Aluminium containers — Dimensions of one-piece cans with 25,4 mm aperture
BS EN 20090-3:1993 Light gauge metal containers. Definitions and determination methods for dimensions and capacities-Aerosol cans
DANSK DS/EN 15008:2017 Aerosol containers – Aluminium containers – Dimensions of one-piece cans with 25,4 mm aperture
MIL MIL-V-22687C-1988 VALVE, BALL, NAVAL SHIPBOARD, FOR AIR, NITROGEN, HELIUM OR HYDRAULIC SERVICE (SIZE 2 1/2 INCHES IPS AND BELOW) (SUPERSEDING MIL-V-22687B)
BS ISO/TR 11761:1992 Light-gauge metal containers. Round open-top cans. Classification of can sizes by construction type
DIN EN 15008 E:2016 Draft Document - Aerosol containers - Aluminium containers - Dimensions of one-piece cans with 25.4 mm aperture; German and English version prEN 15008:2016
IEC 60133B:1971 Supplement B - Dimensions of pot-cores made of ferromagnetic oxides
MIL MIL-PRF-27720G-2009 Tank, Storage, Liquid Oxygen/Liquid Nitrogen, TMU-24/E
DANSK DS/EN ISO 90-3:2002 Light gauge metal containers - Definitions and determination of dimensions and capacities - Part 3: Aerosol cans
IEC 60133A:1970 Supplement A - Dimensions of pot-cores made of ferromagnetic oxides
IEC 60133B:1971/AMD1:1975 Amendment 1 - Dimensions of pot-cores made of ferromagnetic oxides
CEI 2-19:1997 Dimensioni delle spazzole e dei portaspazzole per macchine elettriche
CEI EN 60133:2003 Dimensions of pot-cores made of magnetic oxides and associated parts
NS-ISO 90-3:1986 Light gauge metal containers — Definitions and determination methods for dimensions and capacities — Part 3: Aerosol cans
BS ISO/TR 11762:1992 Light-gauge metal containers. Round open-top cans for liquid products with added gas. Classification of can sizes by construction type
IEC 60133:1967 Dimensions for pot-cores made of ferromagnetic oxides and associated parts
NS-EN ISO 90-3:2001 Light gauge metal containers — Definitions and determination of dimensions and capacities — Part 3: Aerosol cans (ISO 90-3:2000)
NS-EN 1432:1997 Swap bodies — Swap tanks — Dimensions, requirements, test methods, operation conditions

CZ-CSN

CSN 16 3002-1989 Caps of conserve jars PANO. Dimen- sions
CSN 16 3001-1989 Caps of conserve jars OMNIA. Di- mensions
CSN 07 8630-1987 Closing valves for cylinders for dinitrogen monoxide. Dimensions
CSN 77 1060-1977 Round and oonic oans. Dimensions
CSN 16 3003-1989 Caps of conserve jars TWIST. Di- mensions
CSN 77 1022-1989 Round lever lid tins. Basic dimensions and unit-load sizes
CSN 70 3008-1988 Glass containers — Shallow crown finis- hes — Dimensions
CSN 77 1021-1988 Hermetically sealed metal round cans. Basic dimensions and unit-load sizes
CSN 13 7131-1985 Draw — off taps. Dimensions
CSN 13 7130-1985 Outlet valves. Dimensions
CSN 30 3571-1992 Air reservoirs. Dimensions
CSN ISO 10154:1994 Light gauge metal containers - Three-piece necked-in tinplate aerosol cans - Dimensions of the top end

PL-PKN

PN-EN 15007-2017-05 P Aerosol containers -- Tinplate containers -- Dimensions of two and three-piece cans
PN P63508-1987 Textile machinery Sliver cans Division, designation and dimension
PN-EN 15008-2017-05 P Aerosol containers -- Aluminium containers -- Dimensions of one-piece cans with 25,4 mm aperture
PN M59168-1992 Abrasive products Diamont or cubic boron nitride grinding wheels Dimensions
PN M68012-1972 Pneuma?ic ?orging hammers Sizes

Spanish Association for Standardization (UNE)

UNE-EN 15007:2017 Aerosol containers - Tinplate containers - Dimensions of two and three-piece cans
UNE-EN 15007:2007 Metal aerosol containers - Tinplate containers - Dimensions of two and three-piece cans
UNE 49359:1988 AEROSOL CONTAINERS. DIMENSIONS OF 20 MM FINISH FOR 1 PIECE CANS
UNE 49356:1988 METAL AEROSOL CONTAINERS. DIMENSIONS OF THREE PIECE TINPLATE CANS
UNE-EN 15008:2007 Aerosol containers - Aluminium containers - Dimensions of one-piece cans with 25,4 mm aperture
UNE-EN 15008:2017 Aerosol containers - Aluminium containers - Dimensions of one-piece cans with 25,4 mm aperture
UNE 125200:1992 LIGHT GAUGE METAL CONTAINERS. OPEN TOP-CANS FOR FISH CONSERVES AND SEMICONSERVES. DIMENSIONS AND CAPACITIES FOR NOT ROUND CONTAINERS.

German Institute for Standardization

DIN EN 15007:2017-06 Aerosol containers - Tinplate containers - Dimensions of two and three-piece cans; German version EN 15007:2017
DIN 75013:2015-12 Tank trucks - Grounding plate - Dimensions
DIN 75013 E:2015-03 Tank trucks; grounding plate, dimensions
DIN 75013:2015 Tank trucks - Grounding plate - Dimensions
DIN 75013:1979 Tank trucks; grounding plate, dimensions
DIN 28459:1987-11 Flanges for tank trucks; mounting dimensions
DIN 75012:1986 Road tankers; dipstick assembly; mating dimensions
DIN 75012 E:2015-03 Road tankers - Dipstick assembly - Mating dimensions
DIN 75012:2015 Road tankers - Dipstick assembly - Mating dimensions
DIN 75012:2015-10 Road tankers - Dipstick assembly - Mating dimensions
DIN EN 15010:2006 Aerosol containers - Aluminium containers - Tolerances of the fundamental dimensions in connection with the clinch; English version of DIN EN 15010:2006-12
DIN 28459:1987 Flanges for tank trucks; mounting dimensions
DIN 75014:1991 Dome cover for tank trucks, cylindrical; dimensions
DIN 70014-1:1977 Vehicles for Transportation of Swop Bodies; Connecting Dimensions
DIN EN ISO 90-3:2001 Light gauge metal containers - Definitions and determination of dimensions and capacities - Part 3: Aerosol cans (ISO 90-3:2000); German version EN ISO 90-3:2001
DIN EN 15008:2017-06 Aerosol containers - Aluminium containers - Dimensions of one-piece cans with 25,4 mm aperture; German version EN 15008:2017
DIN 5580:1999 Compressed air equipment for railway vehicles - Pressure vessels made of aluminium alloys - Dimensions, designation
DIN ISO 16462:2015-08 Cubic boron nitride inserts, tipped or solid - Dimensions, types (ISO 16462:2014)
DIN ISO 16462:2005 Cubic boron nitride inserts, tipped or solid - Dimensions, types (ISO 16462:2004);English version of DIN ISO 16462:2005
DIN EN 15008 E:2016-05 Aerosol containers - Aluminium containers - Dimensions of one-piece cans with 25,4 mm aperture
DIN ISO 16462 E:2014-11 Cubic boron nitride inserts, tipped or solid - Dimensions, types
DIN 4518-2:1988 Photosensitive materials for reprographic and micrographic use; dimensions; diazo type
DIN EN 1432:1997-08 Swap bodies - Swap tanks - Dimensions, requirements, test methods, operation conditions; German version EN 1432:1997

Association Francaise de Normalisation

NF H44-044*NF EN 15007:2017 Aerosol containers - Tinplate containers - Dimensions of two and three-piece cans
NF H44-044:2006 Metal aerosol containers - Tinplate containers - Dimensions of to and three-piece cans.
NF H44-006*NF EN 15010:2007 Aerosol containers - Aluminium containers - Tolerances of the fundamental dimensions in connection with the clinch
NF T81-052:1976 TRANSPORTATION AND HANDLING OF LIQUID GASES. TANKERS FOR USE ON INLAND WATERWAYS. DIMENSIONAL UNIFICATION OF CONNECTIONS.
NF H44-045*NF EN 15008:2017 Aerosol containers - Aluminium containers - Dimensions of one-piece cans with 25,4 mm aperture
NF EN 15008:2017 Aerosol containers - Aluminum containers - Dimensions of one-piece housings with 25.4 mm opening
NF H44-002*NF EN ISO 90-3:2001 Light gauge metal containers - Definitions and determination of dimensions and capacities - Part 3 : aerosol cans.
NF EN ISO 90-3:2001 Récipients métalliques légers - Définitions et détermination des dimensions et des capacités - Partie 3 : boîtiers pour aérosols
NF E66-317*NF ISO 16462:2014 Cubic boron nitride inserts, tipped or solid - Dimensions, types
NF E66-317:2004 Cubic boron nitride inserts, tipped or solid - Dimensions, types.
NF G40-002:1977 TEXTILE MACHINERY. SPINNING CANS AND ACCESSORIES. DIMENSIONAL SPECIFICATIONS.

Lithuanian Standards Office

LST EN 15007-2007 Metal aerosol containers - Tinplate containers - Dimensions of two and three-piece cans
LST EN 15008-2007 Aerosol containers - Aluminium containers - Dimensions of one-piece cans with 25,4 mm aperture
LST EN 1432-2001 Swap bodies - Swap tanks - Dimensions, requirements, test methods, operation conditions

Compressed Gas Association (U.S.)

CGA P-16-2014 Recommended procedures for nitrogen purging of tank cars
CGA P-31-2012 LIQUID OXYGEN, NITROGEN, AND ARGON CRYOGENIC TANKER LOADING SYSTEM
CGA PS-38-2014 Registration of facilities filling open topped medical nitrogen dewares for device use

European Committee for Standardization (CEN)

EN 15008:2006 Aerosol containers - Aluminium containers - Dimensions of one-piece cans with 25,4 mm aperture
EN 15006:2006 Metal aerosol containers - Aluminium containers - Dimensions of the 25,4 mm aperture
EN 15010:2006 Aerosol containers - Aluminium containers - Tolerances of the fundamental dimensions in connection with the clinch
EN 15008:2017 Aerosol containers - Aluminium containers - Dimensions of one-piece cans with 25@4 mm aperture
EN 1432:1997 Swap bodies - Swap tanks - Dimensions, requirements, test methods, operation conditions

Danish Standards Foundation

DS/EN 15007:2007 Metal aerosol containers - Tinplate containers - Dimensions of two and three-piece cans
DS/EN 15008:2007 Aerosol containers - Aluminium containers - Dimensions of one-piece cans with 25,4 mm aperture
DS/EN ISO 90-3:2002 Light gauge metal containers - Definitions and determination of dimensions and capacities - Part 3: Aerosol cans
DS/IEC 133:1986 Dimensions of pot-cores made of magnetic oxides and associated parts
DS/EN 1432:1998 Swap bodies - Swap tanks - Dimensions, requirements, test methods, operation conditions

RU-GOST R

GOST 26384-1984 Cylindric round tins for canned food. Sizes of constructive elements
GOST 13479-1982 Board and combined cans. General specifications
GOST 5172-1963 Cylindric steel gas-holders with constancy of volume. Parameters and basic dimensions
GOST 19662-1989 Isothermal reservoirs for liquid carbon dioxide. Types, main parameters and dimensions
GOST 5717.2-2003 Glass jars canned food. Basic parameters and dimensions

Standard Association of Australia （SAA）

AS 1727:1975 Tank containers (international sizes)
AS 2355:1990 Open top metal cans - Capacities and related dimensions - Round cans for food and drink
AS 2355:1990/Amdt 1:1990 Open Top Metal Can Capacities and Related Dimensions Food and Beverage Round Cans
AS 2354:1991 Open top metal cans - Definitions, and determination methods for dimensions and capacities

United States Navy

NAVY FED-STD-131 C VALID NOTICE 1-1992 DIAZOTYPE PAPER SHEET AND ROLL SIZES [Use In Lieu Of: NAVY FED-STD-00131 E]
NAVY FED-STD-131 C-1968 DIAZOTYPE PAPER SHEET AND ROLL SIZES
NAVY FED-STD-00131 E-1976 DIAZOTYPE PAPER SHEET AND ROLL SIZES
NAVY MIL-V-22687 C-1988 VALVES, BALL, NAVAL SHIPBOARD, FOR AIR, NITROGEN, HELIUM OR HYDRAULIC SERVICE (SIZES 2-1/2 INCHES NPS AND BELOW)

RO-ASRO

SR 3880-2-1995 Petroleum equipment. Tanks. Shapes and dimensions
STAS 11962-1985 Plastic packings TANKS "WITH CIRCULAR SECTION Dimensions
STAS 11260-1980 Shipbuilding details AIR CASINGS FOR WATER, FUEL AND OIL TANKS Dimensions
STAS 7244-1988 Mining cquipment DRAWING CAGES FOR MINING CARS WITH CAPACITY UP TO 1 iu3 jMain dimcnsions
STAS 12786-1989 Diamond or cubical boron nitride tools RODS FOR GRINDING Dimensions
STAS 5520-1982 Equipments for chcmical industry PEDESTALS FOR TANKS Shapes and dimcnsions
STAS 1687/3-1982 META1XIC LIDS FOR CYLINDRI- CAL CANS FOR TINS Dimensions
STAS 5455-1982 Equipments for chemical industry SIDE SUPPORTS FOR TANKS Shapes and dimensions
STAS 1687/4-1982 Mctallic Packages GHEKING GAUGES FOH CYLINDRICAL TINS Dimensions
STAS 12498-1986 class packings JARS FOR STERILIZED PRESERVES shapes and dimensions
STAS 7957-1981 Equipment for chemical industry HOOPERED BOTTOMS AT 60° FOR TANKS Dimensions
STAS 7958-1981 Equipment for chemical industry HOOPERED BOTTOMS AT 90° FOR TANKS Dimensions
STAS 8941-1987 METALLIC TANKS AT ATMOSPHERIC PRESSURE FOR INSTALLATIONS Shapes and dimensions
STAS 8019-1980 Liquid fuel tanks CYLINDRICAL TANK WITH HORIZONTAL AXIS Main dimensions
STAS 12295/1-1989 Diamond or cubic boron nitride tools GRINDING WHEELS Main dimensions
SR 7110-1994 Undercarriages or railway-cars with standard gauge.Mounted axles.Dimensions
STAS 13100-1992 Honing blades with diamond or cubic boron nitride. Main dimensions
STAS 11681-1988 Textile machinery CYLINDRICAL SLIVER. CANS Types and main dimensions
STAS 8064-1980 GASPIPE PLIERS Dimensions

BE-NBN

NBN H 03-102-1987 Light metal containers. Tanks for liquefied gases. Steel Three Piece Tank Dimensions and Capacities
NBN G 42-010-1984 Cylindrical tank for straps. Main dimensions
NBN H 03-101-1987 Light gauge metal containers - Aerosol cans - Definitions and determination methods for dimensions and capacities

Korean Agency for Technology and Standards (KATS)

KS D ISO 10154-2004(2014) Light gauge metal containers－Three-piece necked-in tinplate aerosol cans－Dimensions of the top end
KS D ISO 10154:2004 Light gauge metal containers－Three-piece necked-in tinplate aerosol cans－Dimensions of the top end
KS D ISO 10154-2019 Light gauge metal containers－Three-piece necked-in tinplate aerosol cans－Dimensions of the top end
KS B 3617-2002(2012) Grain sizes of diamond or cubic boron nitride
KS B 3617-2012 Grain sizes of diamond or cubic boron nitride
KS B 7928-2013 Dimensions of drainage plugs for pesticide tanks of speed sprayers
KS B 7928-2006(2011) Dimensions of drainage plugs for pesticide tanks of speed sprayers
KS D ISO TR 11762:2004 Light－gauge metal containers－Round open－top cans for liquid products with added gas－Classification of can sizes by construction type
KS D ISO TR 11762:2019 Light gauge metal containers - Round open-top cans for liquid product with added gas- Classification of can sizes by construction type
KS D ISO 90-3:2013 Light gauge metal containers－Definitions and determination of dimensions and capacities－Part 3：Aerosol cans
KS D ISO 90-3-2004(2009) Light gauge metal containers－Definitions and determination of dimensions and capacities－Part 3：Aerosol cans
KS D ISO TR 11761:2004 Light－gauge metal containers－Round open－top cans－Classification of can sizes by construction type
KS D ISO 90-3:2004 Light gauge metal containers-Definitions and determination of dimensions and capacities-Part 3:Aerosol cans
KS C 6316-1991 Pot-cores made of ferromagnetic oxide
KS B 6704-2014(2019) Pneumatic cylinders — Mounting dimensions
KS B 6704-2019 Pneumatic cylinders — Mounting dimensions
KS C IEC 60133:2013 Dimensions of pot-cores made of magnetic oxides and associated parts
KS C IEC 60133-2013 Dimensions of pot-cores made of magnetic oxides and associated parts
KS C IEC 60133:2006 Dimensions of pot-cores made of magnetic oxides and associated parts
KS B 6704-2014 Pneumatic cylinders — Mounting dimensions
KS B 6704-2001 Pneumatic cylinders-Mounting dimensions

AR-IRAM

IRAM 6004-1954 Dimensions of canned edible oil products
IRAM 6008-1952 Bottom size and registration number of the can for storage

YU-JUS

JUS M.Z2.027-1978 Hermetically sealed metal foo? cans. Round cansfor general use. Nominal diameters
JUS M.Z2.045-1984 Round cyllndrical hermetically sealed metal food cant. Can ends and flanges. Shape and dlmensions

GSO

BH GSO ISO 10154:2017 Light gauge metal containers -- Three-piece necked-in tinplate aerosol cans -- Dimensions of the top end
GSO ISO 16462:2014 Cubic boron nitride inserts, tipped or solid -- Dimensions, types
GSO ISO 90-3:2016 Light gauge metal containers -- Definitions and determination of dimensions and capacities -- Part 3: Aerosol cans
BH GSO ISO 90-3:2017 Light gauge metal containers -- Definitions and determination of dimensions and capacities -- Part 3: Aerosol cans
BH GSO ISO 16462:2016 Cubic boron nitride inserts, tipped or solid -- Dimensions, types
OS GSO ISO 90-3:2016 Light gauge metal containers -- Definitions and determination of dimensions and capacities -- Part 3: Aerosol cans
GSO ISO 10154:2015 Light gauge metal containers -- Three-piece necked-in tinplate aerosol cans -- Dimensions of the top end

HU-MSZT

MSZ 3607/3-1982 Canned food sensory measurement
MNOSZ 9906-1953 Concentrated nitrogen-filled flammable liquid storage tanks, fire protection and safety standards
MSZ 1056/4-1985 Electric lamp surface dimensions

International Organization for Standardization (ISO)

ISO 90-3:1986/Amd 1:1994 Light gauge metal containers — Definitions and determination methods for dimensions and capacities — Part 3: Aerosol cans — Amendment 1: Dimensions of the top end of three-piece necked-in tinplate can
ISO/TR 11762:1992 Light-gauge metal containers; round open-top cans for liquid products with added gas; classification of can sizes by construction type
ISO 90-3:1986 Light gauge metal containers; Definitions and determination methods for dimensions and capacities; Part 3 : Aerosol cans
ISO/TR 11761:1992 Light-gauge metal containers; round open-top cans; classification of can sizes by construction type
ISO 16462:2014 Cubic boron nitride inserts, tipped or solid - Dimensions, types
ISO 16462:2004 Cubic boron nitride inserts, tipped or solid - Dimensions, types
ISO 6168:1980 Abrasive products; Diamond or cubic boron nitride grinding wheels; Dimensions

FI-SFS

SFS 3340-1977 Portable gas tank. Test pressure, injection pressure, injection scale and size limits
SFS 2862-1984 Connection dimensions of pressure vessels. Cans and tubes. external pressure

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc.

ASHRAE 4217-1998 Thermal Performance of a Full-Scale Stratified Chilled-Water Thermal Storage Tank

IN-BIS

IS 10370 Pt.1-1982 Dimensions of can core mounting accessories for wired circuits Part I For can cores size 26 x 16 mm
IS 10960 Pt.1-1984 Grain Sizes of Diamond or Cubic Boron Nitride Part 1 Name and Grain Size Distribution
IS 10370 Pt.2-1982 Dimensions of wired circuit pot core mounting accessories in dimensions 18 x 11 mm Part 2
IS 11392 Pt.1/Sec.1-1985 Pot cores with dimensions 18 × 11 (mm) Dimensions of pot core mounting accessories for printed circuit board mounting Part 1 (mm) Section 1: Type 1
IS 7439-1974 Dimensions of pneumatic slide

KR-KS

KS D ISO TR 11762-2019 Light gauge metal containers - Round open-top cans for liquid product with added gas- Classification of can sizes by construction type

ANSI - American National Standards Institute

IT12.2-1995 Photography (Imaging Materials) - 135-Size Film Canister Lids - Composition

U.S. Air Force

AIR FORCE MIL-PRF-27720 G-2009 TANK, STORAGE, LIQUID OXYGEN/LIQUID NITROGEN, TMU-24/E

Australian/New Zealand Standard (AU-AS/NZS)

AS/NZS 4516:1998 Abrasive products - Diamond or cubic boron nitride grinding wheels - Dimensions

Society of Automotive Engineers (SAE)

SAE RS-403-1-1950 RS403 Dimensions for Mounting Rings and for Circular Flanges of Tank Mounted Accessories

API - American Petroleum Institute

API STD 12B-1929 DIMENSIONAL SPECIFICATIONS For STANDARD BOLTED TANKS (FIRST EDITION)

GOST

GOST ISO 90-3-2023 Light gauge metal containers. Definitions and determination of dimensions and capacities. Part 3. Aerosol cans
GOST 17032-1971 Horisontal steel tanks for oil-products. Types and principal dimensions

American National Standards Institute （ANSI)

ANSI B74.16-2002 Checking the Size of Diamond and Cubic Boron Nitride Abrasive Grain

CU-NC

NC 17-20-1984 Industrial Transport. Tank Semitrailer SC-26. Parameters and Main Dimensions

International Electrotechnical Commission (IEC)

IEC 60133:1985 Dimensions of pot-cores made of magnetic oxides and associated parts

Others: Nitrogen tank size,Nitrogen tank size