Elastic Spline Dimensions

Elastic Spline Dimensions, Total:224 items.

The international standard classification for "Elastic Spline Dimensions" includes: Machine tools in general , Hand-operated tools , Plastics in general , Springs .

The Chinese standard classification for "Elastic Spline Dimensions" includes: Machine tool assistive device and accessory , Hand tool , General grippers , Basic standards and general methods for synthetic resin and plastic , Spring .

Professional Standard - Machinery

JB/T 9162.47-1999 Spring-type movable center stand - Dimensions
JB/T 3411.32-1999 Tool for assembly push-fit type grease nipples - Dimensions
JB/T 3411.70-1999 Elastic clamping bush for straight shank tool - Dimensions
JB/T 3411.48-1999 Pincer for assembly apring thrust collar in hole - Dimensions
JB/T 3411.71-1999 Elastic clamping bush for tap - Dimensions
JB/T 8328.1-1996 General specifications for die elastomer compression springs
JB/T 3411.3-1999 Elastic swivel holder - Dimensions
JB/T 3411.47-1999 Pincer for assembly spring thrust collar on shaft - Dimensions
JB/T 3411.1-1999 Elastic holder - Dimensions
JB/T 8328.2-1996 Die elastomer compression spring accessories technical conditions

Military Standard of the People's Republic of China-General Armament Department

GJB 36-1985 Pilot human body side sample size

未注明发布机构

FORD WK901-2001 DIMENSIONS, MATERIAL AND HEAT TREATMENT, AND PERFORMANCE OF SPRING BAND HOSECLAMPS
FORD FLTM BO 129-1-2001 WATER IMMERSION - DIMENSIONAL STABILITY OF ELASTOMERS AND PLASTICS (Replaces FLTM BO 029-01)
FORD FLTM BO 129-01-2001 WATER IMMERSION - DIMENSIONAL STABILITY OF ELASTOMERS AND PLASTICS Replaces FLTM BO 029-01 [Replaced: FORD FLTM BO 029-01]

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 1358-2009 Cylindrical helical spring seriate sizes
GB/T 1358-1993 Helical spring seriate sizes
GB/T 44535-2024 Plastics—Determination of linear dimensions of test specimens

Ente Nazionale Italiano di Unificazione

UNI 5415:1964 Elastomers: Finished Products. Molded Parts. Dimensional Tolerances
UNI 8697:1985 Elastomers. Tests on rubber vulcanized. Determination of dimensions of test pieces and products for test purposes.
UNI 1751-1752-1941 Elastic gasket. Dimensions and deviations
UNI 8005:1979 Elastomers. Finished products. Conveyor belts. Sampling.
UNI 6348:1985 Rigid and flexible cellular materials based on plastics and elastomers. Measurement of linear dimensions
UNI 5415-1964 Elastic materials: finished products, stamped parts, dimensional deviations
UNI 6046-1967 Rolling bearings. Fixed concave elastic ring dimensions and related slot dimensions other than 00.82 and 83) size series
UNI EN ISO 16012:2016 Plastics - Determination of linear dimensions of test specimens
UNI 6721:1970 Elastomers: products. Weatherstrips to fasten glasses and anels of railway rolling stock, tramways and trolley- buses. Size, dimensions, features and tests.
UNI 4907:1962 Elastomers: tests on vulcanized products. Sample preparation
UNI EN 10092-1:2004 Hot rolled spring steel flat bars - Flat bars - Dimensions and tolerances on shape and dimensions
UNI EN 14704-1:2005 Determination of the elasticity of fabrics - Part 1: Strip tests
UNI 7701:1977 Elastomers. Raw materials and ingredients. Raw rubber. Sampling.
UNI EN 16983:2016 Disc springs - Quality specifications - Dimensions
UNI EN ISO 29768:2022 Thermal insulating products for building applications - Determination of linear dimensions of test specimens
UNI EN 12085:2013 Thermal insulating products for building applications - Determination of linear dimensions of test specimens
UNI ISO 7425-2:1992 Hydraulic fluid power. Housings for elastomer-energized, plastic-faced seals. Dimensions and tolerances. Rod seal housings.
UNI EN ISO 294-2:2006 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 2: Small tensile bars
UNI 4906:1988 Elastomers. Normal temperatures for conditioning and testing

Spanish Association for Standardization (UNE)

UNE 92-228-1989 Foam elastomer. Determination and variation of dimensions
UNE 53530:1990 ELASTOMERS. RUBBER LATEX. SAMPLING.
UNE 25220:1974 SPRING PINS. GENERAL DIMENSIONS.
UNE 53-608-1984 Determination of dimensions of test tubes for non-honeycomb vulcanized rubber elastomers
UNE-EN ISO 16012:2016 Plastics - Determination of linear dimensions of test specimens (ISO 16012:2015)
AENOR UNE-EN ISO 16012:2016 Plastics. Determination of the linear dimensions of the specimens. (ISO 16012:2015).
UNE-EN 16983:2016 Disc springs - Quality specifications - Dimensions (Endorsed by Asociación Española de Normalización in January of 2017.)
UNE-EN 12085:2013 Thermal insulating products for building applications - Determination of linear dimensions of test specimens

Association Francaise de Normalisation

FD E26-003*FD ISO/TR 21704:2017 Toughness of round steel link chains - Test with sub-size specimens
NF EN 4115:2010 Aerospace Series - Elastomer Profile for Clamps - Dimensions, Weights
NF T58-009*NF EN ISO 16012:2016 Plastics - Determination of linear dimensions of test specimens
NF EN 4114:2010 Aerospace Series - Aluminum Alloy P-Clamps with Elastomer Profile - Dimensions, Weights
NF S53-501:1988 Angling and hunting materials. Lead shot. Dimensions and characteristics.
NF A49-189:1980 Steel tubes. Butt welding, night-angled bends, 3d, galvanized dimensions. Technical delivery conditions.
NF EN 4113:2010 Aerospace series - Corrosion-resistant steel "P" clamps, passivated with elastomer profile - Dimensions, masses
NF T47-506:1991 Rubber O-rings. Test conditions and methods for full-size specimens.
NF P75-214:1997 Thermal insulating products for building applications. Determination of linear dimensions of test specimens.
NF E25-104*NF EN 16983:2017 Disc springs - Quality specifications - Dimensions
NF E48-654:1986 Hydraulic fluid power. Sampling bottles. Dimensions. Cleaning. Conditioning. Identification.
NF EN 16983:2017 Spring washers - Quality specification - Dimensions
NF EN ISO 29768:2022 Thermal insulating products for building applications - Determination of linear dimensions of test specimens
NF P75-214*NF EN ISO 29768:2022 Thermal insulating products for building applications - Determination of linear dimensions of test specimens
NF EN 12085:2013 Thermal insulating products for building applications - Determination of linear dimensions of test specimens
NF ISO 4875-2:2006 Metal band saw blades - Part 2: characteristics and dimensions

German Institute for Standardization

DIN 1570:1979 Hot rolled ribbed and grooved spring steel; dimensions, weights, tolerances, sectional properties
DIN 7865-1:2008-02 Elastomer waterstops for sealing concrete joints - Part 1: Shapes and dimensions
DIN 16986:1987-05 Thermoplastics flat bars; dimensions
DIN 7865-1:1982-02 Elastomeric joint sealing strip for sealing joints in concrete; Shape and dimensions
DIN 53570:1967 Determination of linear dimensions of soft elastic foam plastics
DIN 65202:1999-07 Aerospace series - Elastomeric O-rings - Dimensions
DIN 65202:2012-09 Aerospace series - Elastomeric O-rings - Dimensions; Text in German and English
DIN 65202:1999 Aerospace series - Elastomeric O-rings - Dimensions
DIN EN ISO 16012:2016-02 Plastics - Determination of linear dimensions of test specimens (ISO 16012:2015); German version EN ISO 16012:2015
DIN EN 14704-1:2005-07 Determination of the elasticity of fabrics - Part 1: Strip tests
DIN 5290-2:1977-10 Light metal spring hook without setting nut; dimensions, technical conditions of delivery
DIN 65202 E:2012-01 Draft Document - Aerospace series - Elastomeric O-rings - Dimensions; Text in German and English
DIN LN 9108:2022 Aerospace series -- Elastomers, sheet, panels -- Dimensions, masses; Text in German and English
DIN EN ISO 16012 E:2015-07 Determination of linear dimensions of plastic test specimens (draft)
DIN ISO 34-1 Berichtigung 1 2005-7 Rubber or thermoplastic elastomers - Determination of bursting strength - Part 1: Strip, angle and bow test specimens
DIN 2077:1979 Hot rolled round spring steel dimensions, permissible dimensional and shape tolerances
DIN LN 9108:2022-12 Aerospace series -- Elastomers, sheet, panels -- Dimensions, masses; Text in German and English
DIN 7864-1:1984 Sheets of elastomers for waterproofing; terms of delivery
DIN EN ISO 23999:2012 Resilient floor coverings - Determination of dimensional stability and curling after exposure to heat (ISO 23999:2008); German version EN ISO 23999:2012
DIN EN 16983:2017-09 Disc springs - Quality specifications - Dimensions; German version EN 16983:2016
DIN 2093:2006 Disc springs - Quality specifications - Dimensions
DIN 2093:2013-12 Disc springs - Quality specifications - Dimensions
DIN EN 16983:2017-02 Disc springs - Quality specifications - Dimensions
DIN 2093:2013-02 Disc springs - Quality specifications - Dimensions
DIN 2093:2006-03 Disc springs - Quality specifications - Dimensions

Polski Komitet Normalizacyjny (PKN)

PN H93206-1955 Hot-rolled spring steel -- Grooved flat bars -- Dimensions
PN P63513-1987 Textilc machinery and accessories Spring bottoms Irom cylindrical sliver cans Division, designation and dimensions

National Standardisation Body (ASRO)

STAS 10196-1987 Aircrafts ELASTOMERIC O RINGS Dimensions
STAS 5681/2-1980 ALUM1NIUM STKIPS imcnsions
STAS 7666/2-1980 SINGLE COIL SPRING WASHERS Dimensions
STAS 7911-1989 ELASTOMERS Sampling of raw rubber in bales
STAS 7666/2-1977 S1NGLE COIL SPRING WASHERS Dimensions
STAS 10483-1989 Weaving looms METAL REEDS WITH DOUBLE-SPRING BAULK Basic dimensions
STAS 9466-1973 Machine retaining devices LOCKING ELASTIG ROUND NUT Dimensions
STAS 2585/2-1980 Commercial chains LONG LINK WELDED CHAINS Dimensions
STAS 3439/2-1980 COPPER ZINC ALLOY WITH NICKEL FOR SPRINGS Dimensions

Czech Standards Institute (UNMZ)

CSN 39 5022-1987 Minimal dimensions of bullet cartridge chambers
CSN 42 5610-1985 Nibbet spring leaf bands. Dimensions
CSN 02 6063-1992 Disk springs. Dimensions
CSN 02 6063-1977 Disk springs. Dimensions.
CSN 39 5123-1985 Dimensions of rim fire cartridges
CSN 39 5124-1985 Dimensions of rim fire cartridges
CSN 39 5024-1993 The minimum size of chambers for rimfire cartridges
CSN 15 2820-1989 Spring frameworks. Basic dimensions
CSN 39 5020-1997 Cartridges and chambers - Dimensions, pressures and energies
CSN 35 6557-1989 Test tubes and plugs for radioactive samples. Basic dimensions
CSN 39 5125-1985 Dimensions of cartridges for expanding apparatus
CSN ONA 30 7653-1967 Spoke nípplcs - size
CSN 42 8623-1966 Copper cold-rolled flat bars. Dimensions
CSN 39 5122-1985 Dimensions of ball cartridges (for rifled barrels)

Society of Automotive Engineers (SAE)

SAE AMSR83485/1-2001 Rubber, Fluorocarbon Elastomer, Improved Performance at Low Temperatures, O-Rings, Sizes and Tolerances
SAE AMSR83485/1 Rubber, Fluorocarbon Elastomer, Improved Performance at Low Temperatures, O-Rings, Sizes and Tolerances
SAE AMSR83485/1A Rubber, Fluorocarbon Elastomer, Improved Performance at Low Temperatures, O-Rings, Sizes and Tolerances
SAE AMSR83485/1A-2015 RUBBER, FLUOROCARBON ELASTOMER, IMPROVED PERFORMANCE AT LOW TEMPERATURES, O-RINGS, SIZES AND TOLERANCES
SAE AMS-R-83485/1A-2015 RUBBER, FLUOROCARBON ELASTOMER, IMPROVED PERFORMANCE AT LOW TEMPERATURES, O-RINGS, SIZES AND TOLERANCES
SAE AMS-R-83485/1-2001 Rubber, Fluorocarbon Elastomer, Improved Performance at Low Temperatures, O-Rings, Sizes and Tolerances FSC 5330
SAE J373_198708 Housing Internal Dimensions for Single- and Two-Plate Spring-Loaded Clutches
SAE J373_201205 Housing Internal Dimensions for Single- and Two-Plate Spring-Loaded Clutches
SAE J373_199304 Housing Internal Dimensions for Single- and Two-Plate Spring-Loaded Clutches
SAE J373A_197809 Housing Internal Dimensions for Single- and Two-Plate Spring-Loaded Clutches

Korean Agency for Technology and Standards (KATS)

KS M ISO 4707-2004(2014) Cork－Stoppers－Sampling for inspection of dimensional characteristics
KS M ISO 16012-2019 Plastics — Determination of linear dimensions of test specimens
KS M ISO 16012:2014 Plastics — Determination of linear dimensions of test specimens
KS M ISO 4707-2020 Cork－Stoppers－Sampling for inspection of dimensional characteristics
KS M ISO 16012-2014(2019) Plastics — Determination of linear dimensions of test specimens
KS M ISO 16012-2014(2024) Plastics — Determination of linear dimensions of test specimens
KS C IEC 62317-9-2015(2020) Ferrite cores － Dimensions － Part 9: Planar cores
KS A 0106-2001 Technical drawings-Sizes and layout of drawing sheets
KS D 0046-2014(2019) Methods of sampling for size analysis of ferroalloys and size determination
KS D 0046-2014 Methods of sampling for size analysis of ferroalloys and size determination
KS D 0046-1987 Methods of sampling for size analysis of ferroalloys and size determination
KS D 0046-2019 Methods of sampling for size analysis of ferroalloys and size determination
KS V 3417-2021 Small size chain slings

British Standards Institution (BSI)

BS EN ISO 16012:2015 Plastics. Determination of linear dimensions of test specimens
BS EN 14704-1:2005(2006) Determination of the elasticity of fabrics - Strip tests
BS EN 14704-1:2005 Determination of the elasticity of fabrics - Strip tests
BS EN 13538-2:2002 Determination of dimensional characteristics of sleeping bags - Thickness and elastic recovery
BS PD ISO/TR 21704:2017 Toughness of round steel link chains. Test with sub-size specimens
BS EN 3425:2006(2011) Groove dimensions for axial mounting internal type retaining rings
BS 6984:1988 Specification for dimensions of housings for elastomer-energized plastic-faced hydraulic seals in reciprocating applications
BS ISO 6194-1:2007 Rotary shaft lip-type seals incorporating elastomeric sealing elements - Nominal dimensions and tolerances
BS ISO 7425-1:2002 Hydraulic fluid power - Housing for elastomer-energized, plastic-faced seals - Dimensions and tolerances - Piston seal housings
BS ISO 7425-1:2021 Hydraulic fluid power cylinders. Dimensions and tolerances of housings for elastomer-energized, plastic-faced seals. Piston seal housings
BS EN 16983:2016 Disc springs. Quality specifications. Dimensions
BS ISO 7425-2:2002 Hydraulic fluid power - Housing for elastomer-energized, plastic-faced seals - Dimensions and tolerances - Rod seal housings
BS ISO 7425-2:1989 Hydraulic fluid power. Housing for elastomer-energized, plastic-faced seals. Dimensions and tolerances-Rod seal housings
BS ISO 7425-2:2021 Hydraulic fluid power cylinders. Dimensions and tolerances of housings for elastomer-energized, plastic-faced seals. Rod seal housings

Gosstandart of Russia

GOST 33694-2015 Plastics. Determination of linear dimensions of test specimens
GOST 34067-2017 Cork stoppers. Sampling for inspection of dimensional characteristics
GOST EN 1107-2-2011 Roofing and hydraulic-insulating flexible polymeric (thermoplastic or elastomer) materials. Method for determination of linear dimensional change
GOST 15180-1986 Flexible flat gaskets. Main parameters and dimensions
GOST 17201-1971 Gripping collets for cutting tools with cylindric shank. Design
GOST 25021-1993 Disk flexible couplings. Parameters and dimensions
GOST 21424-1993 Flexible couplings with rubber-bushed studs. Parameters and dimensions
GOST 21424-1975 Pin flexible couplings. Main data. Overall and coupling. Dimensions
GOST 25021-1981 Disk flexible couplings. Main data and dimensions
GOST 18794-1980 Tension springs. Design and dimensions
GOST 18793-1980 Compression springs. Design and dimensions
GOST 18798-1980 Pins for springs. Design and dimensions
GOST 18765-1980 Spring blank holders. Design and dimensions
GOST 18799-1980 Packs of springs. Design and dimensions
GOST 18677-1973 Seals. Design and dimensions
GOST 28129-1989 Test tubes for radioactive samples and stoppers for them. Basic dimensions

International Electrotechnical Commission (IEC)

IEC 60582:1977 Dimensions of vials for liquid scintillation counting
IEC 60991:1989 Resilient mounting rings for small motors; mounting dimensions

Canadian General Standards Board （CGSB)

CAN 2-49.61-M79-1979 Stretchy Ski Goggles, Girls, Common Sizes - Dimensional
CAN/CGSB-49.204-M89-1989 Mannequins Canada Standard Sizes for junior, young women's and ladies' sizes clothing - dimensional

American National Standards Institute （ANSI)

ANSI/ASTM D5947:2001 Test Methods for Physical Dimensions of Solid Plastics Specimens
ANSI/BHMA A156.7-2003 Template Hinge Dimensions

GCC Standardization Organization

GSO ISO 4707:2013 Cork – Stoppers – Sampling for inspection of dimensional characteristics
GSO ISO 16012:2013 Plastics - Determination of linear dimensions of test specimens
GSO ISO/TR 21704:2021 Toughness of round steel link chains — Test with sub-size specimens

Institute of Interconnecting and Packaging Electronic Circuits (IPC)

IPC TM-650 2.2.4-1998 Dimensional Stability, Flexible Dielectric Materials Revision C

Austrian Standards

ONORM C 9406-1992 Elastomer stoppers for general applications — Dimensions

International Organization for Standardization (ISO)

ISO/TR 21704:2017 Toughness of round steel link chains - Test with sub-size specimens
ISO 16012:2004 Plastics - Determination of linear dimensions of test specimens
ISO 16012:2015 Plastics - Determination of linear dimensions of test specimens
ISO 29768:2022 Thermal insulating products for building applications — Determination of linear dimensions of test specimens

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO ISO 16012:2016 Plastics - Determination of linear dimensions of test specimens
BH GSO ISO/TR 21704:2022 Toughness of round steel link chains — Test with sub-size specimens

Danish Standards Foundation

DANSK DS/EN ISO 16012:2015 Plastics - Determination of linear dimensions of test specimens
DANSK DS/EN 16983:2016 Disc springs – Quality specifications – Dimensions
DS/EN 12085:2013 Thermal insulating products for building applications - Determination of linear dimensions of test specimens
DANSK DS/ISO 29768:2022 Thermal insulating products for building applications – Determination of linear dimensions of test specimens

European Committee for Standardization (CEN)

EN ISO 16012:2015 Plastics - Determination of linear dimensions of test specimens (ISO 16012:2015)
prEN 434-1990 Resilient floorcoverings; determination of dimensional stability and curling after exposure to heat
EN 434:1994 Resilient Floor Coverings - Determination of Dimensional Stability and Curling After Exposure to Heat
EN ISO 23999:2012 Resilient floor coverings - Determination of dimensional stability and curling after exposure to heat
EN ISO 23999:2018 Resilient floor coverings - Determination of dimensional stability and curling after exposure to heat
EN 16983:2016 Disc springs - Quality specifications - Dimensions
EN ISO 23999:2021 Resilient floor coverings - Determination of dimensional stability and curling after exposure to heat (ISO 23999:2021)
EN 12085:2013 Thermal insulating products for building applications - Determination of linear dimensions of test specimens
EN ISO 29768:2022 Thermal insulating products for building applications - Determination of linear dimensions of test specimens (ISO 29768:2022)
EN 14704-1:2005 Determination of the elasticity of fabrics - Part 1: Strip tests

Japanese Industrial Standards Committee (JISC)

JIS K 7153:2008 Plastics -- Determination of linear dimensions of test specimens

Indonesia Standards

SNI 05-1040-1989 Shapes and dimensions of bolts
SNI 8186:2015 Alat penangkapan ikan - Ukuran utama jaring lingkar bertali kerut (pukat cincin)
SNI ISO 9424:2016 Wood panel – Determination of test specimen dimensions

Standard Association of Australia （SAA）

AS 1180.1:1972 Methods of test for hose made from elastomeric materials Dimensions

The Directorate General of Specifications and Metrology (DGSM)

OS GSO ISO 4707:2013 Cork – Stoppers – Sampling for inspection of dimensional characteristics

Türk Standardları Enstitüsü

TS 3057-1978 FORGED STEEL BARS, DIMENSIONS

Finnish Standards Institute

SFS 5326-1987 wheelchair. Overall dimensions, weight and steering condition determination
SFS 3077-1974 Casting sampling. Structure and dimensions

American Society for Testing and Materials (ASTM)

ASTM D5947-18 Standard Test Methods for Physical Dimensions of Solid Plastics Specimens
ASTM D5947-03 Standard Test Methods for Physical Dimensions of Solid Plastics Specimens
ASTM D5947-02 Standard Test Methods for Physical Dimensions of Solid Plastics Specimens
ASTM D5947-01e1 Standard Test Methods for Physical Dimensions of Solid Plastics Specimens
ASTM D5947-96 Standard Test Methods for Physical Dimensions of Solid Plastics Specimens
ASTM D5947-06 Standard Test Methods for Physical Dimensions of Solid Plastics Specimens
ASTM D5947-24 Standard Test Methods for Physical Dimensions of Solid Plastics Specimens
ASTM D5947-11 Standard Test Methods for Physical Dimensions of Solid Plastics Specimens

Swedish Institute for Standards

SIS SS 06 05 06-1988 Filler material — Rods for gas-shielded arc welding — Dimensions and tolerances
SIS 03 22 11-1965 Drawing forms. Sizes and frames
SS-ISO 7425-2:2021 Hydraulic fluid power cylinders — Dimensions and tolerances of housings for elastomer-energized, plastic-faced seals — Part 2: Rod seal housings (ISO 7425-2:2021, IDT)
SS-EN ISO 16012:2015 Plastics - Determination of linear dimensions of test specimens (ISO 16012:2015)
SS-EN 16983:2016 Disc springs - Quality specifications - Dimensions

American Gear Manufacturers Association

AGMA 9008-B00 Flexible Couplings - Gear Type - Flange Dimensions, Inch Series

Standards Norway

NS-EN 16983:2016 Disc springs — Quality specifications — Dimensions
NS-EN 12085:1997 Thermal insulating products for building applications — Determination of linear dimensions of test specimens
NS-EN ISO 16012:2015 Plastics — Determination of linear dimensions of test specimens (ISO 16012:2015)

Magyar Szabványügyi Testület

MSZ 9326-1981 Copper and copper alloy spring dimensions

Portuguese Institute of Quality

NP EN 325-2002 Wood-based panels Determination of dimensions of test pieces

Yugoslav Association for Standardization

JUS F.G0.002-1979 Clothes - garments and body measurements. Pictogram and body measures

Lithuanian Standards Office

LST EN 12085-1999 Thermal insulating products for building applications - Determination of linear dimensions of test specimens

Others: Elastic Spline Dimensions,Spline din size