high pressure permeability

high pressure permeability, Total:194 items.

The international standard classification for "high pressure permeability" includes: Other equipment for petroleum and natural gas industries , Equipment for petroleum and natural gas industries in general , Extraction and processing of petroleum and natural gas , Geology. Meteorology. Hydrology , Adhesives , Packaging materials and accessories , Ceramic products , Non-destructive testing , Surface active agents .

The Chinese standard classification for "high pressure permeability" includes: Petroleum exploration, development, gathering and transportation engineering in general , Petroleum drilling & production equipment and instrument , Petroleum development , Pump , Basic standards and general methods for adhesives , Special ceramics , Basic standards and general methods , Solid fuel ore in general , Mechanics Measurement , Surface active agent .

工业和信息化部/国家能源局

JB/T 13152-2017 High pressure pumps for seawater reverse osmosis
JB/T 13153-2017 Booster pumps for seawater reverse osmosis

Professional Standard - Petroleum

SY/T 5345-1999 Oil-water relative permeability measurement
SY/T 6384-1999 Relative permeability measurement under the condition of high temperature for heavy oil reservoir
SY/T 6339-1998 Unsteady-state oil-gas relative permeability measurement
SY/T 5843-1997 Gas-water relative permeability measurement
SY/T 6315-2017 Relative permeability and displacement efficiency test under the condition of high temperature for heavy oil reservoir
SY/T 6370-1998 Measuring instruments of core gas permeability
SY/T 6452-2000 Core oil/water relative permeameter
SY 6810-2010 Calibration method of rock gas permeability tester
SY/T 6315-2006 Relative permeability and displacement efficiency test under the condition of high temperature for heavy oil reservoir
SY/T 5345-2007 Test method for relative permeability
SY 6452-2000 Rock oil-water relative permeability tester
SY/T 6385-1999 The porosity and permeability measurement of core in net confining stress
SY/T 6810-2010 The Calibration Method of Measuring Instruments of Core Gas

Professional Standard - Ocean

HY/T 109-2008 Technical specifications for high - Pressure pump in reverse osmosis plant

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 15330-2020 Test method for water penetration rate of pressure-sensitive tapes

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 28912-2012 Test method for two phase relative permeability in rock
GB/T 1969-1996 Test method for permeability of porous ceramic
GB/T 34533-2023 Determination of porosity,permeability and saturation of shale
GB/T 18851.5-2014 Non-destructive testing―Penetrant testing―Part 5: Penetrant testing at temperatures higher than 50 ℃
GB/T 15330-1994 Test method for water penetration rate of pressure - Sensitive tapes

工业和信息化部

YB/T 5290-2017 Test method for pig iron penetrated to blast furnace carbon bricks
YB/T 4577-2016 Anti-penetration high alumina bricks

国家能源局

SY/T 6385-2016 Porosity and permeability measurement under overburden pressure

Professional Standard - Machinery

JB/T 20155-2013 Osmometer

Inner Mongolia Provincial Standard of the People's Republic of China

DB1506/T 26-2021 Construction specification for high permeable emulsified asphalt permeable course

Professional Standard - Energy

NB/T 11327-2023 Test methods for gas permeability in coal seam

中国石油天然气总公司

SY/T 5802-1993 Rules for check and acceptance to gravity and magnetic field date in petroleum prospecting
SY/T 5893-1993 Specification of making concrete targets for well perforators test

Professional Standard - Coal

MT 223-1990 Coal and rock permeability measurement

Group Standards of the People's Republic of China

T/CAOE 51-2023 Method for determination of permeability of hydrate-containing sediments
T/ZZXJX 248-2022 Technical specification for construction of high-permeability emulsified asphalt permeation course
T/CMES 16003-2021 Hydrogen pressure cycle test and leak/penetration test method of high-pressure hydrogen storage system for vehicles
T/CI 268-2024 Porosity and permeability Determination of coal matrix Helium pressure decay method

其他未分类

BJS 202102 Special food osmotic pressure measurement

National Metrological Verification Regulations of the People's Republic of China

JJG(石油) 46-1997 Verification Regulation of Rock Gas Permeability Meter
JJG 877-2011 Vapor Pressure Osmometers
JJG 877-1994 Verification Regulation of Vapor Pressure Osmometer

能源部

SY 5276-1991 Method for determination of flexural strength, compressive strength and permeability of chemical sand control artificial cores

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence

GJB 2367A-2005 Liquid penetrant inspection

Professional Standard - Chemical Industry

HG/T 3513-2010 Penetrating Agent BX

American Society for Testing and Materials (ASTM)

ASTM C1701/C1701M-17 Standard Test Method for Infiltration Rate of In Place Pervious Concrete
ASTM C1701/C1701M-17a Standard Test Method for Infiltration Rate of In Place Pervious Concrete
ASTM D3816/D3816M-96(2001) Standard Test Method for Water Penetration Rate of Pressure-Sensitive Tapes
ASTM D3816/D3816M-96(2020) Standard Test Method for Water Penetration Rate of Pressure-Sensitive Tapes
ASTM D3816/D3816M-96e1 Standard Test Method for Water Penetration Rate of Pressure-Sensitive Tapes
ASTM D3816/D3816M-96(2003) Standard Test Method for Water Penetration Rate of Pressure-Sensitive Tapes
ASTM C1701/C1701M-17a(2023) Standard Test Method for Infiltration Rate of In Place Pervious Concrete
ASTM D3816/D3816M-96(2007) Standard Test Method for Water Penetration Rate of Pressure-Sensitive Tapes
ASTM D3816/D3816M-96(2012) Standard Test Method for Water Penetration Rate of Pressure-Sensitive Tapes
ASTM D5084-00e1 Standard Test Methods for Measurement of Hydraulic Conductivity of Saturated Porous Materials Using a Flexible Wall Permeameter
ASTM D5084-00 Standard Test Methods for Measurement of Hydraulic Conductivity of Saturated Porous Materials Using a Flexible Wall Permeameter
ASTM D3385-09 Standard Test Method for Infiltration Rate of Soils in Field Using Double-Ring Infiltrometer
ASTM RR-F02-1012 1999 F1927-Test Method for Determination of Oxygen Gas Transmission Rate, Permeability and Permeance at Controlled Relative Humidity Through Barrier Materials Using a Coulometric Detector
ASTM C1781/C1781M-21 Standard Test Method for Surface Infiltration Rate of Permeable Unit Pavement Systems
ASTM C1781/C1781M-14 Standard Test Method for Surface Infiltration Rate of Permeable Unit Pavement Systems
ASTM RR-C09-1034 2009 C1701-Test Method for Infiltration Rate of In Place Pervious Concrete
ASTM C1781/C1781M-15 Standard Test Method for Surface Infiltration Rate of Permeable Unit Pavement Systems
ASTM C1701/C1701M-09 Standard Test Method for Infiltration Rate of In Place Pervious Concrete
ASTM D3385-94 Standard Test Method for Infiltration Rate of Soils in Field Using Double-Ring Infiltrometer
ASTM C1781/C1781M-13 Standard Test Method for Surface Infiltration Rate of Permeable Unit Pavement Systems
ASTM C1781/C1781M-14a Standard Test Method for Surface Infiltration Rate of Permeable Unit Pavement Systems
ASTM D5093-15e1 Standard Test Method for Field Measurement of Infiltration Rate Using Double-Ring Infiltrometer with Sealed-Inner Ring
ASTM D5093-90(1997) Standard Test Method for Field Measurement of Infiltration Rate Using a Double-Ring Infiltrometer with a Sealed-Inner Ring
ASTM D5093-15 Standard Test Method for Field Measurement of Infiltration Rate Using Double-Ring Infiltrometer with Sealed-Inner Ring
ASTM F1927-07 Standard Test Method for Determination of Oxygen Gas Transmission Rate, Permeability and Permeance at Controlled Relative Humidity Through Barrier Materials Using a Coulometric Detector
ASTM D5093-02(2008) Standard Test Method for Field Measurement of Infiltration Rate Using Double-Ring Infiltrometer with Sealed-Inner Ring
ASTM D4631-18 Standard Test Method for Determining Transmissivity and Storativity of Low Permeability Rocks by In Situ Measurements Using Pressure Pulse Technique
ASTM D5093-02 Standard Test Method for Field Measurement of Infiltration Rate Using a Double-Ring Infiltrometer with a Sealed-Inner Ring
ASTM F1927-98(2004) Standard Test Method for Determination of Oxygen Gas Transmission Rate, Permeability and Permeance at Controlled Relative Humidity Through Barrier Materials Using a Coulometric Detector
ASTM F1927-98e1 Standard Test Method for Determination of Oxygen Gas Transmission Rate, Permeability and Permeance at Controlled Relative Humidity Through Barrier Materials Using a Coulometric Detector
ASTM D6391-11(2020) Standard Test Method for Field Measurement of Hydraulic Conductivity Using Borehole Infiltration
ASTM D8152-18 Standard Practice for Measuring Field Infiltration Rate and Calculating Field Hydraulic Conductivity Using the Modified Philip Dunne Infiltrometer Test
ASTM D3385-18 Standard Test Method for Infiltration Rate of Soils in Field Using Double-Ring Infiltrometer
ASTM RR-C15-1000 2014 C1781/C1781M-Test Method for Surface Infiltration Rate of Permeable Unit Pavement Systems
ASTM UOP676-84 Molecular Weight by Vapor Pressure Osmometry
ASTM C1781/C1781M-18 Standard Test Method for Surface Infiltration Rate of Permeable Unit Pavement Systems
ASTM C1781/C1781M-18e1 Standard Test Method for Surface Infiltration Rate of Permeable Unit Pavement Systems
ASTM D3094-18 Standard Practice for Seepage Rate of Aerosol Products

SCC

AWWA MTC64637 The Ammonia- Carbon Dioxide Forward Osmosis Desalination Process: A High Recovery Alternative to Reverse Osmosis
AWWA MTC64605 Integrated Reverse Osmosis and Electrodialysis for High-Recovery Surface Water Desalting
AWWA ACE68821 Improving Recovery in Reverse Osmosis Desalination: Treatment of Concentrate by Electrodialysis
AWWA ACE61649 Application of High Flux and High Rejection RO Membranes for Energy Saving Water Desalination
AWWA MTC69659 Low Pressure Reverse Osmosis and Donnan Dialysis for Simultaneous Removal of Nitrate and Perchlorate
AWWA MTC95005 Ultra-Low Pressure Reverse Osmosis Membranes
ASTM STP 746-81 Permeability and Groundwater Contaminant Transport
DIN 19682-7 E:2014 Draft Document - Soil quality - Field tests - Part 7: Determination of infiltration rate by double ring infiltrometer
DANSK DS/EN 12616:2013 Surfaces for sports areas – Determination of water infiltration rate
AWWA MTC64568 Integrated Reverse Osmosis and Chemical Precipitation for High-Recovery Surface Water Desalting
CAN/CGSB 4.2 No.26.5-M89-1989 Méthodes pour épreuves textiles - Résistance à l'eau - Essai de pénétration à haute pression
DANSK DS/EN ISO 3452-5:2009 Non-destructive testing - Penetrant testing - Part 5: Penetrant testing at temperatures higher than 50 degrees C
NS-EN 12616:2013 Surfaces for sports areas — Determination of water infiltration rate
NS-EN 12616:2003 Surfaces for sports areas — Determination of water infiltrattion rate
NAGDM 105-1998 American National Standard - Test Method for Thermal Transmittance and Air Infiltration of Garage Doors
DIN EN 12616 E:2013 Draft Document - Surfaces for sports areas - Determination of water infiltration rate; German version FprEN 12616:2013
AWWA ACE91145 Market Penetration of Residential Retrofits: A Statistical Perspective
BS EN ISO 19918:2017 Protective clothing. Protection against chemicals. Measurement of cumulative permeation of chemicals with low vapour pressure through materials (ISO 19918:2017)
AWWA WQTC60762 Volume Reduction of High-Silica RO Concentrate
AENOR UNE-EN ISO 3452-5:2009 Non-destructive testing - Penetrant testing - Part 5: Penetrant testing at temperatures higher than 50 degrees C (ISO 3452-5:2008)
NS-EN ISO 3452-5:2008 Non-destructive testing - Penetrant testing - Part 5: Penetrant testing at temperatures higher than 50 degrees C (ISO 3452-5:2008)
AENOR UNE 81239:1983 INDEPENDENT SEMI-AUTONOMOUS FRESH AIR EQUIPMENT. HOSE PERMEABILITY
06/30151657 DC BS EN ISO 3452-5. Non-destructive testing. Penetrant testing. Part 5. Penetrant testing at temperatures higher than 50 degreesC
AWWA MTC69694 Performance of a Reverse Osmosis System When Reclaiming High pH/High Temperature Wastewater
AWWA ACE70600 Addressing Iron and Manganese for Efficient Use of Reverse Osmosis
13/30262911 DC BS EN 12616. Surfaces for sports areas. Determination of water infiltration rate

Standard Association of Australia （SAA）

AS Z24.18.1:1968 Methods of test for pressure sensitive adhesive tapes, Method 18.1: Resistance to penetration - Resistance to penetration at elevated temperatures
AS 1635.18.1:1974 Methods of testing pressure sensitive adhesive tape - Resistance to penetration at elevated temperatures
AS ISO 3452.5:2020 Non-destructive testing — Penetrant testing, Part 5: Penetrant testing at temperatures higher than 50 °C
AS Z24.11.1:1968 Methods of test for pressure sensitive adhesive tapes, Method 11.1: Water vapour permeability - Water vapour permeability

AT-ON

ONORM L 1066-1988 Physical investigations of soils; determination of the injiltration rate with a double ring infiltrometer
ONORM S 7015-1985 Testing ofleather; determination ofthe water vapour permeability

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc.

ASHRAE 3869-1995 Infiltration Rates for a New Swine Building

IN-BIS

IS 13782-1993 Permeable sintered metal materials. Determination of fluid permeability

GM North America

GM GM6289M-2002 Low Permeability Fuel Filler Hoses
GM6289M-2002 Low Permeability Fuel Filler Hoses Revision E
GM GM9665P-1997 Permeability Test for Low Permeation Fuel Filler Hose

Indonesia Standards

SNI 7752-2012 Procedure for measuring soil infiltration rate in the field using a double ring infiltrometer
SNI 03-6473-2000 Test methods for by falling head permeability (of soils)

Canadian General Standards Board （CGSB)

CAN/CGSB-4.2 NO.26.5-M89-1989 Textile Test Methods Water Resistance - High-Pressure Penetration Test

Spanish Association for Standardization (UNE)

UNE 83310:1990 EX CONCRETE TESTS. DETERMINATION OF PERMEABILITY
UNE-EN 12616:2014 Surfaces for sports areas - Determination of water infiltration rate
UNE-EN 12616:2003 Surfaces for sports areas - Determination of water infiltrattion rate
UNE-EN ISO 3452-5:2009 Non-destructive testing - Penetrant testing - Part 5: Penetrant testing at temperatures higher than 50 degrees C (ISO 3452-5:2008)

(U.S.) Ford Automotive Standards

FORD FLTM BU 001-01-2000 MOISTURE VAPOR TRANSMISSION RATE OF WATERPROOF TAPE
FORD M99C30-A-1983 OIL, PENETRATING
FORD M99C30-A-2009 OIL, PENETRATING

German Institute for Standardization

DIN 19682-7:2015-08 Soil quality - Field tests - Part 7: Determination of infiltration rate by double ring infiltrometer
DIN EN ISO 3452-5:2009-04 Non-destructive testing - Penetrant testing - Part 5: Penetrant testing at temperatures higher than 50 °C (ISO 3452-5:2008); German version EN ISO 3452-5:2008
DIN 53116:1977 Testing of paper - Determination of grease permeability
DIN 19687:2011 Soil quality - Percolation rate of water from the soil
DIN 53116:2003 Testing of paper - Determination of grease permeability
DIN EN 772-15:2000 Methods of test for masonry units - Part 15: Determination of water vapour permeability of autoclaved aerated concrete masonry units; German version EN 772-15:2000
DIN EN 13829:2001 Thermal performance of buildings - Determination of air permeability of buildings - Fan pressurization method (ISO 9972:1996, modified); German version EN 13829:2000
DIN EN ISO 3452-5:2009 Non-destructive testing - Penetrant testing - Part 5: Penetrant testing at temperatures higher than 50 °C (ISO 3452-5:2008); English version of DIN EN ISO 3452-5:2009-04

GSO

BH GSO ISO 3452-5:2016 Non-destructive testing -- Penetrant testing -- Part 5: Penetrant testing at temperatures higher than 50 degrees C
OS GSO ISO 3452-5:2013 Non-destructive testing -- Penetrant testing -- Part 5: Penetrant testing at temperatures higher than 50 degrees C
GSO ISO 17785-1:2021 Testing methods for pervious concrete — Part 1: Infiltration rate
BH GSO ISO 17785-1:2022 Testing methods for pervious concrete — Part 1: Infiltration rate

British Standards Institution (BSI)

BS EN ISO 3452-5:2008 Non-destructive testing - Penetrant testing - Penetrant testing at temperatures higher than 50 degrees C
BS EN ISO 3452-5:2009 Non-destructive testing. Penetrant testing. Penetrant testing at temperatures higher than 50 degrees C
BS EN 12616:2003 Surfaces for sports areas - Determination of water infiltration rate
BS EN ISO 19918:2017+A1:2021 Protective clothing. Protection against chemicals. Measurement of cumulative permeation of chemicals with low vapour pressure through materials
14/30266738 DC BS ISO 17785-1. Test methods for pervious concrete. Part 1. Infiltration rate
20/30422645 DC BS ISO 19918 AMD1. Protective clothing. Protection against chemicals — Measurement of cumulative permeation of chemicals with low vapour pressure through materials
BS EN ISO 3452-2:2006 Non-destructive testing - Penetrant testing - Testing of penetrant materials

PL-PKN

PN P22150-1971 Leothers Determination of wa?er yapour permeability
PN P04611-1971 Textile fabrics Determination of steam permeability
PN P22126-1991 Leathers. Determination of water vapour permeability in non-isothermal conditions

RO-ASRO

STAS 9005-1979 TEXTILES Determination of vapour permeability

Association Francaise de Normalisation

NF A09-120-5*NF EN ISO 3452-5:2009 Non-destructive testing - Penetrant testing - Part 5 : penetrant testing at temperatures higher than 50 oC.
NF P90-107*NF EN 12616:2013 Surfaces for sports areas - Determination of water infiltration rate
NF X30-441:2008 Waste - Laboratory determination of the saturation permeability coefficient of a material - Permeability tests using a rigid wall permeameter with constant/variable hydraulic gradient

Korean Agency for Technology and Standards (KATS)

KS B ISO 3452-5:2022 Non-destructive testing — Penetrant testing — Part 5: Penetrant testing at temperatures higher than 50 ℃
KS F 2128-1994(1999) TESTING METHOD FOR WATER PERMEABILITY OF GEOTEXTILE
KS M ISO 7783:2012 Paints and varnishes－Determination of water-vapour transmission properties－Cup method
KS K ISO 18695:2019 Textiles — Determination of resistance to water penetration — Impact penetration test

Japanese Industrial Standards Committee (JISC)

JIS A 1218:2009 Test methods for permeability of saturated soils
JIS A 1218:1998 Test methods for permeability of saturated soils
JIS Z 2343-5:2012 Non-destructive testing -- Penetrant testing -- Part 5: Penetrant testing at temperatures higher than 50 degree C
JIS L 1099:2012 Testing methods for water vapour permeability of textiles
JIS L 1099:2006 Testing methods for water vapour permeability of textiles
JIS L 1099:2021 Test methods for water vapour permeability of textiles
JIS L 1099:1993 Testing methods for water vapour permeability of textiles

CZ-CSN

CSN 77 0351-1981 Testing of packaging materials. Grease permeability

American National Standards Institute （ANSI)

ANSI/T 831 OM-2021 Water absorption of corrugating medium: water drop penetration test

Danish Standards Foundation

DS/EN 12616:2013 Surfaces for sports areas - Determination of water infiltration rate
DS/EN ISO 3452-5:2009 Non-destructive testing - Penetrant testing - Part 5: Penetrant testing at temperatures higher than 50 degrees C

International Organization for Standardization (ISO)

ISO 17785-1:2016 Testing methods for pervious concrete - Part 1: Infiltration rate
ISO 3452-5:2008 Non-destructive testing - Penetrant testing - Part 5: Penetrant testing at temperatures higher than 50 °C
ISO 6613:1980 Windows and door height windows; Air permeability test
ISO 6613:2023 Windows and doors — Air permeability — Test method

KR-KS

KS B ISO 3452-5-2022 Non-destructive testing — Penetrant testing — Part 5: Penetrant testing at temperatures higher than 50 ℃

Lithuanian Standards Office

LST EN 12616-2003 Surfaces for sports areas - Determination of water infiltrattion rate
LST EN ISO 3452-5:2009 Non-destructive testing - Penetrant testing - Part 5: Penetrant testing at temperatures higher than 50 degrees C (ISO 3452-5:2008)

European Committee for Standardization (CEN)

EN 12616:2013 Surfaces for sports areas - Determination of water infiltration rate
EN 12616:2003 Surfaces for sports areas Determination of water infiltration rate
EN ISO 9972:2015 Thermal performance of buildings - Determination of air permeability of buildings - Fan pressurization method (ISO 9972:2015)
EN ISO 3452-5:2008 Non-destructive testing - Penetrant testing - Part 5: Penetrant testing at temperatures higher than 50 degrees C (ISO 3452-5:2008)

RU-GOST R

GOST 33352-2015 Paint materials. Method for determination of liquid water permeability
GOST R 55578-2013 Specialized food products. Method of osmolality determination
GOST 25283-1993 Permeable sintered metal materials. Determination of fluid permeability