volume time

volume time, Total:161 items.

The international standard classification for "volume time" includes: Water heating equipment , Aircraft and space vehicles in general , Insulating gases .

The Chinese standard classification for "volume time" includes: Heat supply and heating engineering , Engine , Basic standards and general methods for dye , Electrotechnical material and universal parts in general , Time and Frequency Measurement .

Professional Standard - Construction Industry

JG/T 379-2012 Technical requirements of the heat allocation device by heating time and heating area

Beijing Provincial Standard of the People's Republic of China

DB11/T 1388-2017 Technical specification for heating metering system by on-off time area method

Professional Standard - Aerospace

QJ 1047-1992 Data Processing Specifications for Pressure - Time and Thrust - Time of Solid Rocket Engine
QJ 1047-1986 Solid rocket motor pressure-time, thrust-time data processing specification

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 21877-2015 Dyestuffs and intermediate of dyes―Determination of tapping density
GB/T 21877-2008 Dyestuffs and intermediate of dyes - Determination of tapping density
GB/T 1410-1989 Methods of test for volume resistivity and surface resistivity of solid insulating materials
GB 3102.1-1993 Quantities and units of space and time

Professional Standard - Agriculture

CNAS-CC105-2020 Determine the management system audit time (QMS, EMS, OHSMS)

National Metrological Verification Regulations of the People's Republic of China

JJG 601-2003 Verification Regulation of Time Interval Generator
JJG 601-2022 Time Calibrators
JJG 238-2018 Time Interval Meters

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 35138-2017 Measurement of fluid flow in closed conduits-Ultrasonic transit-time meters for liquid

Professional Standard - Machinery

JB/T 3702-1997 Timer Relay
JB/T 9478.10-1999 Measuring methods of photocell-Rise time and fall time

Professional Standard - Traffic

JT/T 838-2012 Flow time tester for fine aggregate

Professional Standard - Nuclear Industry

EJ/T 903.7-1994 Scintillator Performance Measurement Method Scintillation Decay Time

Professional Standard - Water Conservancy

SL 08-1989 Time-integrated suspended sediment sampler

Professional Standard - Education

JY/T 0369-2004 Two-dimension Space-time Tracer

Group Standards of the People's Republic of China

T/ZIIC 003-2021 Technical Requirements for Time Synchronization of Time Sensitive Network Devices
T/ZZB 1576-2020 Time relay
T/ZDQ 004-2024 Time relay

SCC

AENOR UNE-EN ISO 6416:2018 Hydrometry. Flow measurement by ultrasonic transmission times (volume time). (ISO 6416:2017).
AENOR UNE-EN 196-3:2017 Cement testing methods. Part 3: Determination of setting time and volume stability.
BS 4333-1:1979 Radioluminescent deposits for time measurement instruments: specification for general requirements for radioluminescence deposits for time measuring instruments
AENOR UNE 52003:1958 Determination of work times. Normal time and standard time.
AENOR UNE-EN 61788-12:2004 Superconductivity. Part 12: Measurement of the ratio between matrix and superconductor volumes. Relationship between volumes of copper and the rest of the superconducting wires composed of Nb3Sn.
VDI 2852 BLATT 3-2001 Characteristics of numerically controlled manufacturing equipment — positioning time, spindle acceleration time, waiting time
ULC 337-2004 Delayed-Action Timelocks (ULC S337)
VDI 2852 BLATT 3-2001 Characteristics of numerically controlled manufacturing equipment — positioning time, spindle acceleration time, waiting time
BS 4332-2:1979 Radioluminescent deposits for time measurement instruments: specification for conditions for carrying out checks on radioluminescent deposits
BS ISO 31-1:1992 Quantities and units-Space and time
DANSK DS/EN ISO 2578:1998 Plastics - Determination of time-temperature limits after prolonged exposure to heat

RU-GOST R

GOST 310.3-1976 Cements. Methods of tests consistency, times of settining and of soundness
GOST 18986.5-1973 Semiconductor diodes. Method for measuring transition time

ES-AENOR

UNE 80-102-1988 Test methods for cement. Determination of cement volume stability and setting time
UNE 52 003 Determination of working time, standard time and time types
UNE 48 136 Gel time

Association Francaise de Normalisation

NF E18-100:2013 Time-temperature indicators and integrators - Tests and performance
NF ISO 17514:2005 Time measuring instruments - Photoluminescent deposits - Test methods and requirements
NF P18-469:2023 Essai pour béton frais - Temps d'écoulement au cône
NF X02-201:1993 Quantities and units. Space and time.
NF ISO 13168:2015 Water quality - Simultaneous determination of the volume activities of tritium and carbon 14 - Method by counting scintillations in a liquid medium

GSO

GSO ISO 17514:2014 Time-measuring instruments -- Photoluminescent deposits -- Test methods and requirements
BH GSO ISO 17514:2015 Time-measuring instruments -- Photoluminescent deposits -- Test methods and requirements
OS GSO ISO 17514:2014 Time-measuring instruments -- Photoluminescent deposits -- Test methods and requirements
OS GSO IEC/TS 62398:2014 Ferrite cores - Technology approval schedule (TAS)
BH GSO IEC/TS 62398:2016 Ferrite cores - Technology approval schedule (TAS)

Korean Agency for Technology and Standards (KATS)

KS T 1303-2022 Determination of ratio of spatial volume to total packaging volume for commercial packaging(consumer packaging)
KS B ISO 6416:2021 Hydrometry — Measurement of discharge by the ultrasonic transit time (time of flight) method
KS M ISO 2578:2022 Plastics — Determination of time-temperature limits after prolonged exposure to heat

KR-KS

KS B ISO 6416-2021 Hydrometry — Measurement of discharge by the ultrasonic transit time (time of flight) method
KS M ISO 2578-2022 Plastics — Determination of time-temperature limits after prolonged exposure to heat

IN-BIS

IS 1674-1960 Specification for Temporary Protection against Corrosion, Fluids, Soft Films, and Solvent Depositions
IS 1153-1975 Specifications for Temporary Preservatives, Fluids, Durocoats, and Solvent Depositions
IS 1154-1957 Specifications for temporary preservatives, fluids, soft films, solvent deposition, and water displacement

International Organization for Standardization (ISO)

ISO/DIS 17514 Time-measuring instruments — Photoluminescent deposits — Test methods and requirements
ISO 12242:2012 Measurement of fluid flow in closed conduits - Ultrasonic transit-time meters for liquid
ISO 8601-2:2019/DAmd 1: Date and time
ISO 2578:1974 Plastics — Determination of time-temperature limits after exposure to prolonged action of heat

British Standards Institution (BSI)

BS ISO 17514:2004 Time-measuring instruments. Photoluminescent deposits. Test methods and requirements
BS ISO 17514:2024 Time-measuring instruments. Photoluminescent deposits. Test methods and requirements
BS ISO 7176-5:2008 Wheelchairs - Determination of dimensions, mass and manoeuvring space
22/30446920 DC BS ISO 17514. Time-measuring instruments. Photoluminescent deposits. Test methods and requirements
BS ISO 15040:1999 Composites - Prepregs - Determination of gel time
BS ISO 24617-1:2013 Language resource management. Semantic annotation framework (SemAF). Time and events (SemAF-Time, ISO-TimeML)
ISO 9073-13:2022 Nonwovens. Test methods - Repeated liquid strike-through time
BS EN ISO 1133-2:2011 Plastics. Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics. Method for materials sensitive to time-temperature history and/or moisture
BS ISO 24675-1:2022 Railway Applications. Running time calculation for timetabling - Requirements
BS EN ISO 80000-3:2013 Quantities and units - Space and time
DD 204-1991 Guide to determination of exposure limits, recovery times and relaxation times in work measurement
BS EN ISO 80000-3:2020 Quantities and units. Space and time
BS EN 62374-1:2010 Semiconductor devices. Time-dependent dielectric breakdown (TDDB) test for inter-metal layers

CZ-CSN

CSN ON 25 8012-1964 Thermometer and thermometer time constants
CSN 35 8757 Cast.11-1986 Transistors. Method for measurement of switching times
CSN 35 8759-1977 Semiconductor devices. Transistors. Methods of measurement of switching times
CSN 67 3150 Cast.04-1975 Time of drying
CSN 35 8745-1973 Semiconductor devices. Transistore. Measurement of open-circuit reverse voltage transfer ratio and tinie coefíicient at high frequencies

Military Standards (MIL-STD)

DOD A-A-51810-1987 TIMER, INTERVAL

US-FCR

FCR FED H-08-4 VOL 3 SEC I 338-1988 MEDICAL GAS ALARM PANEL SCHEDULE
FCR FED H-08-4 VOL 3 SEC I 339-1988 LABORATORY GAS ALARM PANEL SCHEDULE
FCR FED H-08-4 VOL 3 SEC III 708-1993 PUMP SCHEDULES
FCR FED H-08-4 VOL 1 7A-1989 DOOR SCHEDULE
FCR VA 09 06 00-2011 SCHEDULE FOR FINISHES
FCR FED H-08-4 VOL 4-E-G-2-1988 PANEL SCHEDULES
FCR FED H-08-4 VOL 3 SEC III 709-1993 VALVE SCHEDULES
FCR FED H-08-4 VOL 1 7-1993 DOOR SCHEDULE
FCR UFGS-00 41 00-2007 BID SCHEDULES

RO-ASRO

STAS 3331/1-1986 TIME INTERVALS AND SCALES Main coneepts
SR ISO 4168:1994 Time measurement instruments-Conditions for carrying out checks on radioluminescent deposits

Society of Motion Picture and Television Engineers (SMPTE)

SMPTE EG 40-2002 Engineering Guideline Conversion of Time Values Between SMPTE 12M Time Code, MPEG-2 PCR Time Base and Absolute Time
SMPTE EG 40-2012 Engineering Guideline Conversion of Time Values Between SMPTE 12-1 Time Code, MPEG-2 PCR Time Base and Absolute Time
SMPTE RP 159-1995 Vertical Interval Time Code and Longitudinal Time Code Relationship
SMPTE EG 35-1999 Time and Control Code Time Address Clock Precision for Television, Audio and Film
SMPTE EG 35-2012 Time and Control Code Time Address Clock Precision for Television, Audio and Film

American Society for Testing and Materials (ASTM)

ASTM D7170-06a Standard Test Method for Determination of Derived Cetane Number (DCN) of Diesel Fuel Oils-Fixed Range Injection Period, Constant Volume Combustion Chamber Method
ASTM D7170-06 Standard Test Method for Determination of Derived Cetane Number (DCN) of Diesel Fuel Oils-Fixed Range Injection Period, Constant Volume Combustion Chamber Method
ASTM D7854-13 Standard Test Method for Carbon Black-Void Volume at Mean Pressure
ASTM D4311-96 Standard Practice for Determining Asphalt Volume Correction to a Base Temperature
ASTM D4311/D4311M-15 Standard Practice for Determining Asphalt Volume Correction to a Base Temperature

IETF - Internet Engineering Task Force

RFC 3339-2002 Date and Time on the Internet: Timestamps
RFC 5955-2010 The application/timestamped-data Media Type (Updates: 5544)

ITU-R - International Telecommunication Union/ITU Radiocommunication Sector

QUESTION 238/7-2001 Trusted time source for time stamp authority
QUESTION 110-2/7-1997 Time codes
ITU-R TF.583-5-2001 Time codes
ITU-R TF.583-4-1997 Time Codes
ITU-R TF.583-2-1994 Time Codes
ITU-R TF.583-3-1995 Time Codes
QUESTION 239/7-2001 Instrumentation time codes

International Telecommunication Union (ITU)

ITU-R QUESTION 238/7-2001 Trusted time source for time stamp authority
ITU-R QUESTION 2387-2001 Trusted time source for time stamp authority
ITU-R QUESTION 110-2/7-1997 Time codes
ITU-R QUESTION 110-27-1997 Time codes
ITU-R VOEU 71-2 FRENCH-1993 Time Transfer Documentation Time Signal Transfer Documentation
ITU-R TF.536-2 FRENCH-2003 Time-scale notations Notations ?utiliser pour d閟igner les 閏helles de temps
ITU-R TF.583-6 FRENCH-2003 Time codes
ITU-R TF.583-6-2003 Time codes
ITU-R TF.583-6 SPANISH-2003 Time codes
ITU-T G.8273/Y.1368-2013 Framework of phase and time clocks
ITU-R QUESTION 2397-2001 Instrumentation time codes
ITU-R TF.1876 FRENCH-2010 Trusted time source for Time Stamp Authority
ITU-R TF.1876-2010 Trusted time source for Time Stamp Authority
ITU-R TF.1876 SPANISH-2010 Trusted time source for Time Stamp Authority

Institute of Electrical and Electronics Engineers (IEEE)

EG 40:2002 EG 40:2002 - SMPTE Engineering Guideline - Conversion of Time Values between SMPTE 12M Time Code, MPEG-2 PCR Time Base and Absolute Time
SMPTE EG 40:2002 EG 40:2002 - SMPTE Engineering Guideline - Conversion of Time Values between SMPTE 12M Time Code, MPEG-2 PCR Time Base and Absolute Time
SMPTE EG 40:2012 EG 40:2012 - SMPTE Engineering Guideline - Conversion of Time Values between SMPTE 12-1 Time Code, MPEG-2 PCR Time Base and Absolute Time
EG 40:2012 EG 40:2012 - SMPTE Engineering Guideline - Conversion of Time Values between SMPTE 12-1 Time Code, MPEG-2 PCR Time Base and Absolute Time
SMPTE EG 40:2016 EG 40:2016 - SMPTE Engineering Guideline - Conversion of Time Values between SMPTE ST 12-1 Time Code, MPEG-2 PCR Time Base and Absolute Time
EG 40:2016 EG 40:2016 - SMPTE Engineering Guideline - Conversion of Time Values between SMPTE ST 12-1 Time Code, MPEG-2 PCR Time Base and Absolute Time

ITE - Institute of Transportation Engineers

CD-032-2005 Transit Despeje Intervals

United States Navy

NAVY MS3345 REV C-2013 FLANGE, SPLIT MOUNTING METER, TIME TOTALIZING
NAVY MIL-T-82535 (1)-1969 TIMER, INTERVAL, MARK 11 MOD 2 (ASSEMBLY)
NAVY MIL-T-82535-1968 TIMER, INTERVAL, MARK 11 MOD 2 (ASSEMBLY)
NAVY MIL-T-82535 NOTICE 1-1986 TIMER, INTERVAL, MARK 11 MOD 2 (ASSEMBLY)
NAVY DOD-STD-1399-441-1982 INTERFACE STANDARD FOR SHIPBOARD SYSTEMS SECTION 441 PRECISE TIME AND TIME INTERVAL (PTTI)

The American Road & Transportation Builders Association

AASHTO CA11-4-2013 Brief 11. Commuting Departure Time and Trip Time

German Institute for Standardization

DIN 5483-1:1983 Time-dependent quantities; terms for the time-dependency
DIN 5483-1:1983-06 Time-dependent quantities; terms for the time-dependency
DIN 277:2021-08 Areas and volumes in building construction
DIN EN ISO 2578:1998-10 Plastics - Determination of time-temperature limits after prolonged exposure to heat (ISO 2578:1993); German version EN ISO 2578:1998

AASHTO - American Association of State Highway and Transportation Officials

CA11-4-2013 Brief 11. Commuting Departure Time and Trip Time
MP2-2001 Standard Specification for Superpave Volumetric Mix Design (2000 Edition; Interim Edition 4/2001)

Society of Automotive Engineers (SAE)

SAE AIR4279A-2012 Heat Up Time

SAE - SAE International

SAE AIR4279-1995 Heat Up Time

HU-MSZT

MNOSZ 10151-1952 Volume meter glass device volume bottle
MNOSZ 19981-1955 Method for testing the softening time of liquid mineral oil cement

JP-JEM

JEM TR 247-2011 Recommendation of the refurbishment time for the gas insulated transformer accessories

AT-ON

ONORM A 8063-1983 Dimensions of the human body; necessary free space for moving at different positions of the human body

GM Europe

GME8748-2007 Messung der Nachhallzeit im Fahrzeug Reverberation Time Measurement in the Vehicle English/German; This specification may be applied only for current projects incl. Global Epsilon e (37

SE-SIS

SIS 01 61 38-1971 Quantities and units. Space and time

AENOR

UNE 48136:1962 GELIFICATION TIME

Natural Gas Processor's Association (NGPA)

GPA STD 8195-1995 Tentative Standard for Converting Net Vapor Space Volumes to Equivalent Liquid Volumes

Consultative Committee for Space Data Systems (CCSDS)

CCSDS 301.0-B-4-2010 Time code formats

Lithuanian Standards Office

LST EN ISO 26782:2009/AC:2010 Anaesthetic and respiratory equipment - Spirometers intended for the measurement of time forced expired volumes in humans - Technical Corrigendum 1 (ISO 26782:2009/Cor 1:2009)

European Telecommunications Standards Institute (ETSI)

ETSI TS 101 861-2001 Time Stamping Profile V1.1.1

U.S. Military Regulations and Norms

ARMY A-A-52526-1995 TIME DELAY UNIT; ADJUSTABLE, SOLID STATE (METRIC)
ARMY A-A-52526 VALID NOTICE 1-2004 TIME DELAY UNIT; ADJUSTABLE, SOLID STATE (METRIC)

NATO - North Atlantic Treaty Organization

STANAG 3527-1969 Aircrew Flying Time and Rest Periods (ED 1 AMD 7)
STANAG 3527-1996 Aircrew Flying Time and Rest Periods (ED 2 AMD 0)

US-VA

VA 09 06 00-2011 SCHEDULE FOR FINISHES

FI-SFS

SFS 3375-1975 textile. Determination of formaldehyde gas residual time in dyes