Resin melting temperature

Resin melting temperature, Total:56 items.

The international standard classification for "Resin melting temperature" includes: Paints and varnishes , Thermosetting materials .

The Chinese standard classification for "Resin melting temperature" includes: Coating , Basic standard and general method for coating , Basic standards and general methods for synthetic resin and plastic .

工业和信息化部

HG/T 3793-2019 Hot-melt fluorocarbon resin (PVDF) coatings

Professional Standard - Chemical Industry

HG/T 3793-2005 Hot - Melt fluorocarbon resin (PVDF) coatings

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 30794-2014 Determination of polyvinylidene fluoride(PVDF) content of hot-melt fluorocarbon resin coatings(dry film)―Dropping of the melting temperature
GB/T 32681-2016 Plastics. Phenolic resins. Determination of heats and temperatures of reaction by differential scanning calorimetry

未注明发布机构

SAE AMS3729A-2014 Epoxy Resin Matrix, Thermosetting Moderate Temperature Resistant, Unfilled

Group Standards of the People's Republic of China

T/FSI 028-2019 Fusible polytetrafluoroethylene resin

Taiwan Provincial Standard of the People's Republic of China

CNS 1182-1986 Method of Test for Resin Type Soldering Flux

GM North America

GM GM9301P-1989 Test for Intrinsic Melt Viscosity of Thermoplastic Resins

CZ-CSN

CSN 64 0341-1990 Plastics. Termosetting casting resins. etermination of temperature increa- e of epoxy resins during curing

Society of Automotive Engineers (SAE)

SAE AMS3727A-1993 RESIN, EPOXY, MATRIX, THERMOSETTING Moderate Temperature Resistant, Unfilled
SAE AMS3727-1988 RESIN, EPOXY, MATRIX, THERMOSETTING Moderate Temperature Resistant, Unfilled
SAE AMS3729-2011 EPOXY RESIN MATRIX, THERMOSETTING Moderate Temperature Resistant, Unfilled
SAE AMS3729A-1994 Epoxy Resin Matrix, Thermosetting Moderate Temperature Resistant, Unfilled
SAE AMS3729A-2022 Epoxy Resin Matrix, Thermosetting Moderate Temperature Resistant, Unfilled
SAE AMS3849-1979 CLOTH, QUARTZ, STYLE 581 FABRIC Hot-Melt, Addition-Type, Polyimide Resin Impregnated
SAE AMS3849A-2011 CLOTH, QUARTZ, STYLE 581 FABRIC Hot-Melt, Addition-Type, Polyimide Resin Impregnated
SAE AMS3372-1969 SILICONE RESIN, ELASTOMERIC High Tear Strength, Elevated Temperature Cure
SAE AMS3372A-2001 Silicone Resin, Elastomeric High Tear Strength Elevated Temperature Cure

SAE - SAE International

SAE AMS3727B-1995 RESIN@ EPOXY@ MATRIX@ THERMOSETTING MODERATE TEMPERATURE RESISTANT@ UNFILLED

SCC

SAE AMS3727-1995 Resin, Epoxy, Matrix, Thermosetting Moderate Temperatureresistant, Unfilled (Cancelled: Oct 1995)
DANSK DS/EN ISO 11409:1998 Plastics - Phenolic resins - Determination of heats and temperatures of reaction by differential scanning calorimetry
NS-EN ISO 11409:1998 Plastics — Phenolic resins — Determination of heats and temperatures of reaction by differential scanning calorimetry (ISO 11409:1993)
AENOR UNE-EN ISO 11409:1999 PLASTICS - PHENOLIC RESINS - DETERMINATION OF HEATS AND TEMPERATURES OF REACTION BY DIFFERENTIAL SCANNING CALORIMETRY (ISO 11409:1993)

Korean Agency for Technology and Standards (KATS)

KS M ISO 11409:2006 Plastics－Phenolic resins－Determination of heats and temperatures of reaction by differential scanning calorimetry
KS M ISO 11409-2022 Plastics－Phenolic resins－Determination of heats and temperatures of reaction by differential scanning calorimetry
KS M ISO 11409-2006(2017) Plastics－Phenolic resins－Determination of heats and temperatures of reaction by differential scanning calorimetry
KS M ISO 11409-2006(2022) Plastics－Phenolic resins－Determination of heats and temperatures of reaction by differential scanning calorimetry

British Standards Institution (BSI)

BS EN ISO 11409:1998(1999) Plastics — Phenolic resins — Determination of heats and temperatures of reaction by differential scanning calorimetry
BS EN ISO 11409:1998 Plastics - Phenolic resins - Determination of heats and temperatures of reaction by differential scanning calorimetry

GOSTR

GOST R 57920-2017 Plastics. Phenolic resins. Determination of heat and temperature of reaction by differential scanning calorimetry

Association Francaise de Normalisation

NF T51-403*NF EN ISO 11409:1998 Plastics. Phenolic resins. Determination of heats and temperatures of reaction by differential scanning calorimetry.
NF EN ISO 11409:1998 Plastics - Phenolic resins - Determination of reaction heats and temperatures by differential scanning calorimetry
NF EN ISO 9771:1997 Plastics - Phenolic resins - Determination of the pseudoadiabatic temperature rise of thermoset liquid resols under acidic conditions

HU-MSZT

MSZ KGST 893-1978 The definition of unsaturated polyester resin, the gel time of the resin is 298 degrees (25 ℃)

International Organization for Standardization (ISO)

ISO 11409:1993 Plastics; phenolic resins; determination of heats and temperatures of reaction by differential scanning calorimetry

American National Standards Institute （ANSI)

ANSI/ASTM D2471:1999 Test Method for Gel Time and Peak Exothermic Temperature of Reacting Thermosetting Resins (08.02)

Danish Standards Foundation

DS/EN ISO 11409:1999 Plastics - Phenolic resins - Determination of heats and temperatures of reaction by differential scanning calorimetry

German Institute for Standardization

DIN EN ISO 11409:1998 Plastics - Phenolic resins - Determination of heats and temperatures of reaction by differential scanning calorimetry (ISO 11409:1993); German version EN ISO 11409:1998
DIN EN ISO 11409:1998-10 Plastics - Phenolic resins - Determination of heats and temperatures of reaction by differential scanning calorimetry (ISO 11409:1993); German version EN ISO 11409:1998
DIN EN ISO 9771:1997 Plastics - Phenolic resins - Determination of the pseudo-adiabatic temperature rise of liquid resols when cured under acid conditions (ISO 9771:1995); German version EN ISO 9771:1997

RU-GOST R

GOST 16388-1970 Phenol-formaldehyde resins. Method for determination of drop temperature
GOST 16388-2017 Phenol-formaldehyde resins. Method for determination of drop temperature
GOST 21970-2015 Unsaturated polyester resins. Methods for determination of maximum temperature during the setting

PT-IPQ

NP 236-1989 Pitch Determination of mollification temperature

American Society for Testing and Materials (ASTM)

ASTM D2471-99 Standard Test Method for Gel Time and Peak Exothermic Temperature of Reacting Thermosetting Resins

(U.S.) Ford Automotive Standards

FORD ESB-M4G101-B-1978 SEALER, LOW TEMPERATURE HEAT CURING SYNTHETIC RESIN BASE - THUMBABLE

Defense Logistics Agency

DLA MIL-DTL-47113 D-2001 COMPOUND, HEAT SINK, SILICONE AND/OR NON-SILICONE
DLA MIL-DTL-47113 D VALID NOTICE 1-2006 COMPOUND, HEAT SINK, SILICONE AND/OR NON-SILICONE

General Motors Corporation (GM)

GM 9986062-1995 Epoxy, Two-Part, Room Temperature Cure, Resin

European Committee for Standardization (CEN)

EN ISO 11409:1998 Plastics - Phenolic Resins - Determination of Heats and Temperatures of Reaction by Differential Scanning Calorimetry ISO 11409:1993

United States Navy

NAVY MIL-R-23461 A-1987 RESIN COMPOUND, THERMOSETTING, ROOM TEMPERATURE CURING, FOR METAL COATING

GM Holden Ltd

HOLDEN HN 2014-2005 Adhesive - Hot Melt - High Softening Point
HOLDEN HN 2493-2008 ADHESIVE - HOT MELT, High Softening Point

Lithuanian Standards Office

LST EN ISO 11409:2000 Plastics - Phenolic resins - Determination of heats and temperatures of reaction by differential scanning calorimetry (ISO 11409:1993)

AENOR

UNE-EN ISO 11409:1999 PLASTICS - PHENOLIC RESINS - DETERMINATION OF HEATS AND TEMPERATURES OF REACTION BY DIFFERENTIAL SCANNING CALORIMETRY (ISO 11409:1993)

PL-PKN

PN C89085-21-1988 Epoxy resins Methods of testing Determination of the peak temperatur?

Others: Determination of Reaction Heat and Temperature of Plastic Phenolic Resin by Differential Scanning Calorimetry,Test method for gel time and maximum exotherm temperature of reactive thermosetting resins,Resin melting temperature,Standard Test Method for Gel Time and Maximum Exotherm Temperature of Reactive Thermoset Resins,Melting temperature,Hot melt fluororesin