Fire Endurance Test Method

Fire Endurance Test Method, Total:284 items.

The international standard classification for "Fire Endurance Test Method" includes: Refractories , Rolling bearings , Mechanical testing of metals , Chemical analysis , Conducting materials , Electrical equipment of ships and of marine structures , Explosives. Pyrotechnics .

The Chinese standard classification for "Fire Endurance Test Method" includes: Fireproof material in general , Sliding bearing , Forging and pressing , Basic standards and general methods for water treatment agent , Unshaped refractory , Graphite material , Electrical installation parts for vessel , Hygiene, safety and labor protection .

Professional Standard - Electron

SJ 2140-1982 Methods of measurement for limiting voltage of silicon current regulator diodes

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence

GJB 5891.19-2006 Test method of loading material for initiating explosive device Part 19: Measurement of minimum quantity for primary explosive

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB 7948-1987 Test method for PV limit of plastics bearings
GB/T 22593-2008 Water treatment reagent - General rules for the determination of limiting viscosity number
GB/T 7322-2017 Refractory products--Determination of refractoriness
GB/T 29536-2013 Testing method for the forming limit diagram(FLD)of metal tube
GB/T 17601-2023 Refractory products—Determination of resistance to acid
GB/T 7322-1997 Test method for pyrometric cone equivalent (refractoriness) of refractories
GB/T 7322-2007 Refractory products—Determination of pyrometric cone equivalent (refractoriness)
GB/T 7948-1987 Test method for PV limit of plastics bearings

Group Standards of the People's Republic of China

T/CSAE 49-2016 Test method of forming limit diagram of automotive sheets
T/CSAE 201-2021 Test method of ultimate thickness reduction ratio for automotive steel sheets in stamping
T/SOECC 014-2024 Flexible display device Test method of critical bending radius

Professional Standard - Ferrous Metallurgy

YB/T 5199-1993 Dense refractory castables―Determination of pyrometric cone equivalent (refractoriness)
YB/T 5288-1999 Test methods for corrosion resistance of graphite anode

Professional Standard - Machinery

JB/T 14607-2023 Tractors - Ultimate drawing load - Test methods

Professional Standard-Ships

CB/T 3386.2-1992 Fire resistance test method for ship cable fire-resistant penetration device
CB 3386.2-1992 Fireproof Through-penetration Equipment for Ship Electric Cable - Fire Resistance Test

Professional Standard - Coal

MT/T 837-1999 Method of determining the minimum oxygen content concentration for coal dust explosion

Gosstandart of Russia

GOST 4071.2-2021 Insulating refractory products. Determination of cold compressive strength at room temperature
GOST 4071.2-1994 Insulating refractory products. Determination of cold compressive strength
GOST 4071.1-2021 Refractory products with less than 45 % true porosity. Method for determination of compressive strength at room temperature
GOST 4071.1-1994 Refractory products with a true porosity of less than 45%. Determination of cold compressive strength
GOST 31175-2003 Refractory mortars. Methods of testing
GOST ISO 15025-2012 Occupational safety standards system. Protective clothing for protection against heat and flame. Method of test for limited flame spread
GOST 30771-2001 Refractory products containing carbon. Methods of testing
GOST ISO 15025-2019 Occupational safety standards system. Protective clothing against flame. Method of test for limited flame spread
GOST 4069-1969 Refractories and refractory raw materials. Methods of refractoriness determination
GOST 4069-2020 Refractories and refractory raw materials. Methods of refractoriness determination
GOST R 53788-2010 Refractories and refractory raw materials. Methods of refractoriness determination
GOST 473.8-1981 Chemically resistant and heat resistant ceramic ware. The method for determination of static bending strength
GOST 33625-2015 Charcoal. Standard test method for ultimate analysis
GOST 9623-1987 Laminated glued wood. Method for determination of ultimate strength and modulus of elasticity in compression
GOST R 53298-2009 Suspended ceilings. Fire resistance test method
GOST 2642.15-1997 Refractories and refractory raw materials. Method for determination of general carbon
GOST 2642.15-2021 Refractories and refractory raw materials. Methods for determination of general carbon
GOST R 71710-2024 Refractory materials. Test method for abrasion resistance
GOST 2642.8-1997 Refractories and refractory raw materials. Methods for the determination of magnesium oxide

GCC Standardization Organization

GSO ISO 15025:2008 Protective clothing -- Protection against heat and flame -- Method of test for limited flame spread
GSO ISO 2156:2015 Aircraft -- Fire-resisting electrical cables -- Methods of test
GSO ISO 10294-4:2013 Fire resistance tests -- Fire dampers for air distribution systems -- Part 4: Test of thermal release mechanism

British Standards Institution (BSI)

BS ISO 15025:2000 Protective clothing - Protection against heat and flame - Method of test for limited flame spread
BS EN 12874:2001 Flame Arresters - Performance Requirements, Test Methods and Limits for Use
BS EN 532:1995(1999) Protective clothing — Protection against heat and flame — Test method for limited flame spread
BS 1902-5-5.0:1983 Methods of testing refractory materials. Refractory and thermal properties.-Introduction
BS 1902-5-5.2:1983 Methods of testing refractory materials. Refractory and thermal properties-Determination of pyrometric cone equivalent (refractoriness) (method 1902-502)
BS 1902-5.11:1986 Methods of testing refractory materials - Refractory and thermal properties - Determination of thermal spalling resistance by the prism test (method 1902-511)
BS 1902-1B:1967 Methods of testing refractory materials-Basic refractory materials
BS ISO 10294-1:1996 Fire-resistance tests. Fire dampers for air distribution systems. Test method
BS 1902-8:1988 Methods of testing refractory materials-Refractories containing carbon
BS 1902-5.4:1989 Methods of testing refractory materials. Refractory and thermal properties-Determination of thermal expansion (for large test pieces) (method 1902-504)
BS 1902-5-5.6:1985 Methods of testing refractory materials. Refractory and thermal properties-Determination of thermal conductivity (hot wire method) (method 1902-506)
BS 1902 Sec.5.2:1983 Methods of testing refractory materials. Refractory and thermal properties. Determination of pyrometric cone equivalent (refractoriness) (method 1902-502)
BS EN ISO 16852:2016 Flame arresters. Performance requirements, test methods and limits for use
BS ISO 21736:2020 Refractories. Test methods for thermal shock resistance
BS 1902:1952 Methods of testing refractory materials
BS 1902-5.3:1990 Methods of testing refractory materials - Refractory and thermal properties - Determination of thermal expansion (horizontal method to 1100 °C) (method 1902-503)
BS 6911-8:1993 Testing earth-moving machinery. Determination of slope limits for machine fluid systems operation (static test method)

Japanese Industrial Standards Committee (JISC)

JIS R 2204:1991 Testing method for refractoriness of refractory brick
JIS A 1205:2009 Test method for liquid limit and plastic limit of soils
JIS A 1205:1999 Test method for liquid limit and plastic limit of soils
JIS R 2209:2007 Testing method for refractoriness-under-load of refractory bricks
JIS R 2209:1991 Testing method for refractoriness under load of refractory bricks
JIS R 2204:1999 Test method for refractoriness of refractories and raw materials
JIS M 8512:1970 Testing method for refractoriness of refractory raw materials
JIS R 2657:1995 Testing method for spalling of refractory bricks and insulating fire bricks
JIS A 1206:1970 Method of test for plastic limit of soils
JIS R 2115:2008 Testing method for permeability to gases of refractory products
JIS R 2213:1995 Test method for modulus of rupture of refractory bricks
JIS R 2115:2022 Testing method for permeability to gases of refractory products
JIS R 2619:1981 Testing Method for Modulus of Rupture of Insulating Fire Bricks
JIS T 8022:2020 Protective clothing against heat and flame -- Method of test for limited flame spread
JIS R 2573:1991 Testing method for refractoriness of fireclay plastic refractories
JIS R 2658:1995 Testing method for compressive creep of refractory bricks
JIS R 2656:1995 Testing method for modulus of rupture of refractory bricks and insulating fire bricks at elevated temperature
JIS T 0302:2000 Testing method for corrosion resistance of metallic biomaterials by anodic polarization measurement
JIS R 2619:1995 Testing method for modulus of rupture of insulating fire bricks

Korean Agency for Technology and Standards (KATS)

KS L 3506-2001 TESTING METHOD FOR REFRACTORINESS OF REFRACTORY RAW MATERIALS
KS F 2303-2000 Test method for liquid limit and plastic limit of soils
KS L 3113-2021 Testing method for refractoriness of refractory materials and products
KS L 3119-2015(2020) Testing method for refractoriness-under-load of refractory bricks
KS F 2269-1986 Methods for fire tests of roof coverings
KS F 2304-2000 METHOD OF TEST FOR PLASTIC LIMIT OF SOILS
KS F 2269-2001 Methods for fire tests of roof coverings
KS F 2845-2008 Fire resistance test for glazed elements
KS F 2305-2022 Test method for shrinkage limit of soils
KS L 5502-1996(2011) Testing method for water content of high aluminous plastic refractories and fireclay plastic refractories
KS F 2845-2013 Fire resistance test for glazed elements
KS W ISO 2156-2014 Aircraft－Fire-resisting electrical cables－Methods of test
KS L 3113-2006 Testing method for refractoriness of refractory materials and products
KS F 2840-2006 Fire resistance tests for fire dampers
KS L 5503-1986 TESTING METHOD FOR REFRACTORINESS OF FIRECLAY PLASTIC REFRACTORIES
KS L 3504-2008(2023) Testing method for grain size of castable refractories
KS L 5503-1992(1997) TESTING METHOD FOR REFRACTORINESS OF FIRECLAY PLASTIC REFRACTORIES
KS F 2258-2009 Method of fire test for wooden structural parts of buildings
KS L 3125-2008(2018) Testing method for setting time of refractory mortars
KS L 3113-2016(2021) Testing method for refractoriness of refractory materials and products
KS L 3113-2016 Testing method for refractoriness of refractory materials and products
KS L 3113-1985 Testing method for refractoriness of refractory materials and products
KS L 3315-2023 Testing method for spalling of refractory bricks and insulating fire bricks
KS V 0930-2013 Method of fire resistance tests of fire door for marine use
KS L 3317-2023 Testing method for permeability to gases of refractory products
KS F 2905-2003 Test methods for effect of impact on sprayed fire resistive material applied to structural members
KS F 2305-2020 Standard test method for shrinkage limit of soils
KS F 2298-2000 Flame retardant testing method for vertical protection mesh
KS V 0931-2013 Method of fire resistance tests of fire damper for marine use
KS L 3315-2013(2023) Testing method for spalling of refractory bricks and insulating fire bricks
KS L 3504-2008(2018) Testing method for grain size of castable refractories
KS V 0930-2012 Method of fire resistance tests of fire door for marine use
KS L 3523-1978 Testing methods for sieve analysis and water content of refractory materials
KS K ISO 15025-2021 Protective clothing — Protection against flame —Method of test for limited flame spread
KS F 2257-1-2005 Methods of fire resistance test for elements of building construction-General requirements
KS V 0929-2024 Method of fire protection tests of fire door for marine use
KS L 3115-2-2012 Testing method for cold compressive strength of refractory bricks-Part 2:Test with packing
KS L 3115-1-2010 Testing method for cold compressive strength of refractory bricks-Part 1:Test without packing
KS L 3115-1-2015 Testing method for cold compressive strength of refractory bricks — Part 1: Test without packing
KS L 3523-2006(2016) Testing methods for sieve analysis and water content of refractory materials
KS L 3306-1980 Testing method for thermal conductivity of firebricks by hot wire
KS F 2839-2014(2024) Methods of fire resistance tests for flexible ducts
KS L 3317-2013(2018) Testing method for permeability to gases of refractory products
KS L 3139-2006(2016) Testing method for modulus of rupture of refractory bricks and insulating fire bricks at elevated temperature
KS L 3111-2013 Testing methods for dimensions of refractory bricks
KS L 3111-2012 Testing methods for dimensions of refractory bricks
KS L 3129-2020 Testing method for coefficient of linear variation of refractory mortar
KS L 3139-2006 Testing method for modulus of rupture of refractory bricks and insulating fire bricks at elevated temperature
KS L 3306-2007(2012) Testing method for thermal conductivity of firebricks by hot wire

Indonesia Standards

SNI 3422-2008 Testing methods for shrinkage limit of soils
SNI 15-1852-1990 Refractory bricks, Test method for heat conductivity
SNI 15-0350-1989 Fine refractory clay as refractory cement for refractory bricks, Specification and test method
SNI 9147:2023 Mortar tahan api jenis lempung tahan api (fireclay) dan mortar tahan api kadar alumina tinggi (high alumina): Klasifikasi dan metode uji
SNI 15-1853-1990 Test method for thermal shock resistance of refractory bricks
SNI 15-1321-1989 Chammote refractory mortars, hardened at high temperature, Test method for friction resistance

Standards Norway

NS-EN ISO 15025:2002 Protective clothing — Protection against heat and flame — Method of test for limited flame spread (ISO 15025:2000)
NS 8004:1982 Geotechnical testing - Laboratory methods - Shrinkage limit
NS 8003-1982 Geotechnical testing - Laboratory methods - Plastic limit
NS-EN 532:1994 Protective clothing — Protection against heat and flame — Test method for limited flame spread
NS 8003:1982 Geotechnical testing — Laboratory methods — Plastic limit
NS-EN ISO 15025:2016 Protective clothing — Protection against flame — Method of test for limited flame spread (ISO 15025:2016)

American Society for Testing and Materials (ASTM)

ASTM F970-00 Standard Test Method for Static Load Limit
ASTM F970-07 Standard Test Method for Static Load Limit
ASTM F970-17 Standard Test Method for Static Load Limit
ASTM F970-22 Standard Test Method for Measuring Recovery Properties of Floor Coverings after Static Loading
ASTM G125-00 Standard Test Method for Measuring Liquid and Solid Material Fire Limits in Gaseous Oxidants
ASTM G125-00(2015) Standard Test Method for Measuring Liquid and Solid Material Fire Limits in Gaseous Oxidants
ASTM G125-00(2008) Standard Test Method for Measuring Liquid and Solid Material Fire Limits in Gaseous Oxidants
ASTM G125-95e1 Standard Test Method for Measuring Liquid and Solid Material Fire Limits in Gaseous Oxidants
ASTM F970-06 Standard Test Method for Static Load Limit
ASTM C199-84(2005) Standard Test Method for Pier Test for Refractory Mortars
ASTM D4318-00 Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils
ASTM F970-15 Standard Test Method for Static Load Limit
ASTM D4318-10e1 Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils
ASTM D4318-05 Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils
ASTM RR-D35-1026 2018 D6818- Test Method for Ultimate Tensile Properties of Turf Reinforcement Mats
ASTM E2218-02 Standard Test Method for Determining Forming Limit Curves
ASTM C199-84(2011) Standard Test Method for Pier Test for Refractory Mortars
ASTM B136-84(2018) Standard Method for Measurement of Stain Resistance of Anodic Coatings on Aluminum
ASTM RR-E27-1004 2003 E1232-Standard Test Method for Temperature Limit of Flammability of Chemicals
ASTM B136-84(1998) Standard Method for Measurement of Stain Resistance of Anodic Coatings on Aluminum
ASTM RR-C08-1019 2006 C0704- Standard Test Method for Abrasion Resistance of Refractory Materials at Room Temperature
ASTM RR-C08-1011 1994 C0577-Standard Test Method for Permeability of Refractories
ASTM D4318-17e1 Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils

American Concrete Institute

ACI 216R-1989(2001) Guide for determining the fire resistance of concrete elements
ACI 216R-89 (2001) errata 2008 Guide for determining the fire resistance of concrete members

European Committee for Standardization (CEN)

EN 12874:2001 Flame Arresters - Performance Requirements, Test Methods and Limits for Use
EN 993-3:1997 Methods of test for dense shaped refractory products - Part 3: Test methods for carbon-containing refractories

The Directorate General of Specifications and Metrology (DGSM)

OS GSO ISO 15025:2008 Protective clothing -- Protection against heat and flame -- Method of test for limited flame spread
OS GSO ISO 2156:2015 Aircraft -- Fire-resisting electrical cables -- Methods of test
OS GSO ISO 8905:2015 Sawn timber -- Test methods -- Determination of ultimate strength in shearing parallel to grain

Standard Association of Australia （SAA）

AS 1774.22:2000(R2013) Refractory materials and physical test methods for refractory materials Test methods for refractory mortars
AS R31.23:1966 Methods for physical testing of refractories and refractory materials, Method 23: The determination of abrasion resistance
AS 1774.22:2000 Refractories and refractory materials - Physical test methods Refractory mortar - Test methods
AS 1774.32:2002/Amdt 1:2003 Refractory materials and physical test methods for refractory materials Test methods for carbon-containing refractory products
AS 1774.10:1982 Refractories and refractory materials - Physical test methods, Method 10: The determination of pyrometric cone equivalent (refractoriness)
AS 1774.32:2002(R2013) Refractory materials and physical test methods for refractory materials Test methods for carbon-containing refractory products
AS 4420.6:1996 Windows - Methods of test - Ultimate strength test
AS R31.14:1966 Methods for the physical testing of refractories and refractory materials, Method 14: The determination of thermal conductivity of insulating firebricks
AS 1774.10:1976 Methods for physical testing of refractories and refractory materials, Method 10: The determination of pyrometric cone equivalent (refractoriness)
AS 1774.1:2000 Refractories and refractory materials - Physical test methods - Determination of cold compressive strength
AS R31.13:1966 Methods for physical testing of refractories and refractory materials, Method 13: The determination of thermal conductivity of insulting firebricks
AS 1774.6:1978 Refractories and refractory materials - Physical test methods, Method 6: The determination of true density
AS R31.20:1966 Methods for physical testing of refractories and refractory materials, Method 20: The determination of water content and wet sieve analysis of refractory materials
AS R31.15:1966 Methods for physical testing of refractories and refractory materials, Method 15: The determination of thermal conductivity of insulating firebricks
AS 1774.11:2015 Refractories and refractory materials — Physical test methods, Method 11: Determination of thermal expansion
AS 1774.13:1989 Refractories and refractory materials - Physical test methods, Method 13: Permanent dimensional change
AS R31.7:1966 Methods for the physical testing of refractories and refractory materials, Method 7: The determination of permeability to air
AS 1774.6:1992 Refractories and refractory materials - Physical test methods, Method 6: Determination of true density
AS R31.11:1966 Methods for physical testing of refractories and refractory materials, Method 11: The determination of thermal expansion
AS 1774.4.4:1992 Refractories and refractory materials - Physical test methods, Method 4.4: Preparation of test pieces - Mouldable refractories
AS 1774.25:1992 Refractories and refractory materials - Physical test methods, Method 25: Determination of density by the Rees-Hugill method
AS 1774.1:1991 Refractories and refractory materials - Physical test methods, Method 1: Determination of cold compressive strength
AS R31.6:1966 Methods for physical testing of refractories and refractory materials, Method 6: The determination of permeability to air
AS 1774.4.5:1994 Refractories and refractory materials - Physical test methods, Method 4.5: Preparation of test pieces - Gunning refractories
AS R31.0:1966 Methods for the physical testing of refractories and refractory materials, Method 0: Gross sampling of refractories and refractory materials
AS 1774.1:1981 Refractories and refractory materials - Physical test methods, Method 1: The determination of cold compressive strength
AS 1774.1:2024 Refractories and refractory materials - Physical test methods, Method 1: Determination of cold compressive strength
AS 1774.4.1:1990 Refractories and refractory materials - Physical test methods, Method 4.1: Preparation of test pieces - Castable refractories
AS R31.19:1966 Methods for physical testing of refractories and refractory materials, Method 19: The determination of water content and wet sieve analysis of refractory materials
AS 1774.1:1976 Methods for physical testing of refractories and refractory materials, Method 1: The determination of cold compressive strength
AS R31.25:1966 Methods for the physical testing of refractories and refractory materials, Method 25: The Rees-Hugill method for determining true specific gravity
AS R31.16:1966 Methods for the physical testing of refractories and refractory materials, Method 16: The determination of modulus of rupture of castable refractories
AS 1774.21:1985 Refractories and refractory materials - Physical test methods, Method 21: The determination of workability index of mouldable refractories
AS 1774.3:1977 Methods of physical testing of refractories and refractory materials, Method 3: The determination of cold modulus of rupture
AS 1774.3:1981 Refractories and refractory materials - Physical test methods, Method 3: The determination of cold modulus of rupture
AS R31.8:1966 Methods for physical testing of refractories and refractory materials, Method 8: The determination of bulk density
AS 1774.3:2022 Refractories and refractory materials — Physical test methods, Method 3: Determination of cold modulus of rupture
AS 1774.25:1998(R2013) Refractory materials and physical test methods for refractory materials Determination of density by the Rees-Hugill method
AS 1774.22:1985 Refractories and refractory materials - Physical test methods, Method 22: Bonding strength of refractory mortar
AS 1774.10:1994 Refractories and refractory materials - Physical test methods, Method 10: Pyrometric cone equivalent (refractoriness)
AS 1774.7:1991 Refractories and refractory materials - Physical test methods, Method 7: Determination of permeability to gases
AS 1774.3:2000 Refractories and refractory materials -Physical test methods - Determination of cold modulus of rupture
AS 1774.6:2001(R2013) Determination of true density of refractory materials and physical test methods for refractory materials
AS 1774.23.1:1992 Refractories and refractory materials - Physical test methods, Method 23.1: Abradability index - Oblique method
AS 1774.3:1992 Refractories and refractory materials - Physical test methods, Method 3: Determination of cold modulus of rupture
AS 1774.23:1987 Refractories and refractory materials - Physical test methods, Method 23: Abradability index
AS R31.10:1966 Methods for physical testing of refractories and refractory materials, Method 10: The determination of pyrometric cone equivalent
AS R31.22:1966 Methods for physical testing of refractories and refractory materials, Method 22: The determination of bonding and fired strength of refractory mortar
AS 1774.9:1992 Refractories and refractory materials - Physical test methods, Method 9: Determination of resistance to the disintegrating effect of carbon monoxide
AS 1774.11:1996 Refractories and refractory materials - Physical test methods, Method 11: Thermal expansion
AS 1774.4.2:1992 Refractories and refractory materials - Physical test methods, Method 4.2: Preparation of test pieces - Low-cement castable refractories
AS R31.24:1966 Methods for physical testing of refractories and refractory materials, Method 24: The determination of the resistance to thermal shock (spalling)
AS 1774.23.2:1999 Refractories and refractory materials - Physical test methods - Abradability index - Perpendicular method
AS R31.18:1966 Methods for physical testing of refractories and refractory materials, Method 18: The determination of permanent linear change on heating of castable refractories
AS 1774.1:2000(R2013) Determination of cold compressed strength of refractory materials and physical test methods for refractory materials
AS 1774.25:1998 Refractories and refractory materials - Physical test methods - Determination of density by the Rees-Hugill method
AS 1774.28:1998 Refractories and refractory materials - Physical test methods, Method 28: Ceramic fibre products - Test methods
AS 1774.23.2:1999(R2013) Refractory materials and physical test methods for refractory materials Wear resistance index vertical method
AS 1774.24:1989 Refractories and refractory materials - Physical test methods, Method 24: Resistance to thermal shock
AS 1774.2:1991 Refractories and refractory materials - Physical test methods, Method 2: Determination of bulk density of granular materials
AS R31.21:1966 Methods for physical testing of refractories and refractory materials, Method 21: The determination of drying and firing changes in the size of mouldable refractories
AS 1774.14:1992 Refractories and refractory materials - Physical test methods - Thermal conductivity
AS 1774.4.5:2002(R2013) Preparation of test specimens for physical testing of refractory materials and refractory materials Gunmetal refractory materials
AS 1774.23.1:2001(R2013) Refractory materials and physical test methods for refractory materials Wear resistance index tilt method
AS 1774.21:1996 Refractories and refractory materials - Physical test methods Method 21:Mouldable refractories - Workability index
AS 1774.4.4:2001(R2013) Preparation of test pieces for physical testing of refractories and refractory materials Moldable refractories
AS 1774.19:1978 Refractories and refractory materials - Physical test methods, Method 19: The determination of sieve analysis and water content
AS 1774.3:2000(R2013) Determination of cold modulus of rupture for refractory materials and physical test methods for refractory materials

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO ISO 2156:2017 Aircraft -- Fire-resisting electrical cables -- Methods of test

Bureau of Indian Standards

IS 10047-1981 Test methods for refractory ramming materials
IS 10570-1983 Methods for testing refractory castables
IS 10570-2011 Methods Of Testing Refractory Castables
IS 12458-1988 Fire resistance test methods for fire hydrants
IS 18190-2023 Fire Resistance Of Perimeter Fire Barrier Joint System - Method Of Tests

German Institute for Standardization

DIN 32645:2008 Chemical analysis - Decision limit, detection limit and determination limit under repeatability conditions - Terms, methods, evaluation
DIN 32645:1994 Chemical analysis; decision limit; detection limit and determination limit; estimation in case of repeatability; terms, methods, evaluation
DIN EN ISO 15025:2017-04 Protective clothing - Protection against flame - Method of test for limited flame spread (ISO 15025:2016); German version EN ISO 15025:2016
DIN EN 532:1995 Flame test method for protective clothing against limited spread of heat and flame
DIN 54270-3:1977-08 Testing of textiles; determination of the limit viscosity of cellulose, EWNN procedure
DIN ISO 14490-7:2017-09 Optics and photonics – Test methods for telescopic systems – Part 7: Test methods for limit of resolution
DIN 54270-4:1977-08 Testing of textiles; determination of the limit-viscosity of celluloses, nitrate procedure
DIN 18122-1:1997 Soil, investigation and testing - Consistency limits - Part 1: Determination of liquid limit and plastic limit

Ente Nazionale Italiano di Unificazione

UNI CEN/TS 15418:2007 Methods of test for dense refractory products - Guidelines for testing the corrosion of refractories caused by liquids
UNI EN 993-8:1999 Methods of test for dense shaped refractory products - Determination of refractoriness-under-load
UNI EN 993-3:1999 Methods of test for dense shaped refractory products - Test methods for carbon-containing refractories

Spanish Association for Standardization (UNE)

UNE-EN ISO 15025:2016 Protective clothing - Protection against flame - Method of test for limited flame spread (ISO 15025:2016) (Endorsed by Asociación Española de Normalización in February of 2017.)
UNE-EN ISO 15025:2003 Protective clothing - Protection against heat and flame - Method of test for limited frame spread (ISO 15025:2000)
UNE-EN ISO 16852:2017 Flame arresters - Performance requirements, test methods and limits for use (ISO 16852:2016)
UNE-EN 12874:2002 Flame arresters - Performance requirements, test methods and limits for use.

Malaysia Standards

MS 395-1976 Test method for refractoriness under load

Cuban Institute of Standards and Metrology

NC 96-00-07-1987 Standards System for Fire Protection. Fire Resistance Limit of Structures. Furnace's Technical Requirements

Society of Automotive Engineers (SAE)

SAE ARP5483/5A-2013 Rolling Element Test Method for Radial Limit and Fracture Load Testing
SAE ARP5483/4A-2013 Rolling Element Test Method for Axial Limit and Fracture Load Testing
SAE ARP5483/4A Rolling Element Test Method for Axial Limit and Fracture Load Testing
SAE ARP5448/1A-2016 Plain Bearing Radial Limit and Ultimate Load Tests
SAE ARP5448/1-2010 Plain Bearing Radial Limit and Ultimate Load Tests
SAE ARP5448/1-2004 Plain Bearing Radial Limit and Ultimate Load Tests
SAE ARP5483/4-2007 Rolling Element Test Method for Axial Limit and Fracture Load Testing
SAE ARP5483/4 Rolling Element Test Method for Axial Limit and Fracture Load Testing

International Organization for Standardization (ISO)

ISO 8905:1988 Sawn timber; test methods; determination of ultimate strength in shearing parallel to grain

Yugoslav Association for Standardization

JUS B.D8.319-1986 Refractories. Methods of phisical testing. Determination of the resistance to thermal shoch. Water quenching

Underwriter Laboratories of Canada (ULC)

CAN/ULC-S144-2012(C2022) STANDARD FIRE RESISTANCE TEST METHOD – GREASE DUCT
CAN/ULC-S111-2013(C2018) Standardized test method for fire resistance of filters
ULC-S107-1969 Test Method for Fire Resistance of Roof Convering Materials

Association Francaise de Normalisation

NF EN 993-12:1997 Test methods for dense shaped refractory products - Part 12: determination of pyroscopic resistance (refractoriness)
NF EN 1047-2:2019 Safe storage units - Classification and fire resistance test methods - Part 2: refractory containers and chambers
NF ISO 21736:2020 Refractory materials - Thermal shock resistance testing methods
NF P94-052-1:1995 Soil : investigation and testing. Atterberg limit determination. Part 1 : liquid limit. Cone penetrometer method.
NF S74-505:1993 Protective clothing. Protection against heat and flames. Test method : determination of the heat transmission on exposure to flame.
NF EN 993-3:1997 Test methods for dense shaped refractory products - Part 3: Test methods for carbon-containing refractories

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association

JEDEC JESD22-B130-2022 Test Method for Establishing X-Ray Total Dose Limit for DRAM Devices

Czech Standards Institute (UNMZ)

CSN 72 6031-1982 Refractory materials. Method of test for linear thermal expansion

Polski Komitet Normalizacyjny (PKN)

PN B02851-1990 Fire proiection of buildings Test method of fire resistance of elements building
PN C05011 ArkusZ03-1971 Test methods of oarweyer belts DetermLnation of flame resistanee

Danish Standards Foundation

DANSK DS/EN ISO 15025:2016 Protective clothing – Protection against flame – Method of test for limited flame spread (ISO 15025:2016)

American Association of State Highway and Transportation Officials

T 90-2000 Standard Method of Test for Determining the Plastic Limit and Plasticity Index of Soils

Others: Fire Endurance Test,Fire Endurance Test,Fire Endurance Test Method,Fire Endurance Test,Soil liquid limit test method,Soil liquid limit test method,Fire resistance limit test method,Test methods for special refractory materials